PS2801-1-A Datasheet - Mouser

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

Renesas, Electronics, PS2801-4, products, 2013, R08DS0096EJ0500, Page, Rev.5.00, PS2801-1,, product, from, Time, this, with, Tape, Tel:, Fax:, voltage, PS2801-1, temperature, Collector, Temperature, such, Voltage, Unit, Current, pcs/reel, other, information, conditions

Transcript

R08DS0096EJ0500 Rev.5.00 Page 1 of 14
Jan 23, 2013
1. Anode
2. Cathode
3. Emitter
4. Collector
4 3
1 2
Anode
Cathode
Emitter
Collector
1. 3. 5. 7.
2. 4. 6. 8.
9. 11. 13. 15.
10. 12. 14. 16.
1 2 3 4 5 6 7 8
1615 1413 1211 10 9
(Top View)
PIN CONNECTION
PS2801-1
PS2801-4
The mark shows major revised points.
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
Data Sheet
PS2801-1,PS2801-4
HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER
DESCRIPTION
The PS2801-1 and PS2801-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon
phototransistor in a plastic SSOP for high density applications.
This package has shield effect to cut off ambient light.
FEATURES
• High isolation voltage (BV = 2 500 Vr.m.s.)
• Small and thin package (4,16-pin SSOP, Pin pitch 1.27 mm)
• High collector to emitter voltage (VCEO = 80 V)
• High-speed switching (tr = 3 μs TYP., tf = 5 μs TYP.)
• Ordering number of tape product: PS2801-1-F3, PS2801-4-F3
• Pb-Free product
• Safety standards
• UL approved: No. E72422
• BSI approved (BS EN 60065, BS EN 60950)
• CSA approved: No. CA 101391(CA5A, CAN/CSA-C22.2 60065, 60950)
• DIN EN 60747-5-5 (VDE 0884-5) approved (Option)
APPLICATIONS
• Programmable logic controllers
• Measuring instruments
• Power supply
• Hybrid IC
R08DS0096EJ0500
Rev.5.00
Jan 23, 2013


PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 2 of 14
Jan 23, 2013
PACKAGE DIMENSIONS (UNIT: mm)
M0.12
0.4±0.1
1.27
2.

0.
1
0.

0.
1
PS2801-1 PS2801-4
4.4
7.0±0.3
0.5±0.3
0.
15
+
0.
10
–0
.0
5
2.7±0.3 10.3±0.3
4.4
7.0±0.3
0.5±0.3
0.
15
+
0.
10
–0
.0
5
1.27
2.
0+
0.
3
–0
.2
0.

0.
1
M0.12 0.40+0.10–0.05
PHOTOCOUPLER CONSTRUCTION
Parameter Unit (MIN.)
Air Distance 4.5 mm
Outer Creepage Distance 4.5 mm
Inner Creepage Distance 2.5 mm
Isolation Thickness 0.1 mm

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 3 of 14
Jan 23, 2013
MARKING EXAMPLE
PS2801-1
Made in Taiwan
Made in Japan
Made in Taiwan
Halogen free
Made in Japan
Halogen free
" " (Vertical bar)
:Made in Taiwan & Halogen free
" " (Horizontal bar)
:Made in Japan & Halogen free
" " (Square)
:Made in Japan
Company initial
Week Assembled
Year Assembled (Last 1 digit)
Last 1 numbers of type
No. : 1
Assembly Lot
3 0 1
PS2801-4
Country Assembled
Assembly Lot
No. 1 pin
Mark
PS2801-4
NL301
3 01
Year Assembled
(Last 1 Digit)
LN
Rank Code
In-house Code
(L: Pb-Free)
Week Assembled
R

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 4 of 14
Jan 23, 2013
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Packing Style
Safety Standard
Approval
Application
Part Number*1
PS2801-1-F3 PS2801-1-F3-A Embossed Tape 3 500
pcs/reel
Standard products
(UL, BSI, CSA
approved)
PS2801-1-V-F3 PS2801-1-V-F3-A Embossed Tape 3 500
pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
PS2801-1
PS2801-4-F3 PS2801-4-F3-A Embossed Tape 2 500
pcs/reel
Standard products
(UL, BSI, CSA
approved)
PS2801-4-V-F3 PS2801-4-V-F3-A
Pb-Free
Embossed Tape 2 500
pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
PS2801-4
PS2801-1-F3 PS2801-1Y-F3-A Embossed Tape 3 500
pcs/reel
Standard products
(UL, BSI, CSA
approved)
PS2801-1-V-F3 PS2801-1Y-V-F3-A
Special version
(Pb-Free and
Halogen Free)
Embossed Tape 3 500
pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
PS2801-1
Note: *1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Ratings Parameter Symbol
PS2801-1 PS2801-4
Unit
Forward Current (DC) IF 50 mA/ch
Reverse Voltage VR 6 V
Power Dissipation Derating ΔPD/°C 0.6 0.8 mW/°C
Power Dissipation PD 60 80 mW/ch
Diode
Peak Forward Current *1 IFP 1 A/ch
Collector to Emitter Voltage VCEO 80 V
Emitter to Collector Voltage VECO 6 V
Collector Current IC 50 mA/ch
Power Dissipation Derating ΔPC/°C 1.2 mW/°C
Transistor
Power Dissipation PC 120 mW/ch
Isolation Voltage *2 BV 2 500 Vr.m.s.
Operating Ambient Temperature TA −55 to +100 °C
Storage Temperature Tstg −55 to +150 °C
Notes: *1. PW = 100 μs, Duty Cycle = 1%
*2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together (PS2801-1).
Pins 1-8 shorted together, 9-16 shorted together (PS2801-4).

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 5 of 14
Jan 23, 2013
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Forward Voltage VF IF = 5 mA 1.1 1.4 V
Reverse Current IR VR = 5 V 5 μA
Diode
Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 15 pF
Transistor Collector to Emitter
Dark Current
ICEO VCE = 80 V, IF = 0 mA 100 nA
Current Transfer Ratio
(IC/IF) *1
CTR IF = 5 mA, VCE = 5 V 80 600 %
Collector Saturation
Voltage
VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V
Isolation Resistance RI-O VI-O = 1.0 kVDC 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pF
Rise Time *2 tr 3
Fall Time *2 tf 5
Turn-on Time *2 ton 6
Coupled
Turn-off Time *2 toff
VCC = 5 V, IC = 2 mA, RL = 100 Ω
5
μs
Notes: *1. CTR rank (PS2801-1 only)
K : 300 to 600 (%)
P : 150 to 300 (%)
L : 100 to 300 (%)
N : 80 to 600 (%)
*2. Test circuit for switching time
VCC
VOUT
RL = 100 Ω
IF
50 Ω
Pulse Input
PW = 100 s
Duty Cycle = 1/10
μ Input
Output
90%
10%
tr td tf ts ton toff


PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 6 of 14
Jan 23, 2013
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
0
25
50
100
75
75 10025 50
Ambient Temperature TA (°C)
D
io de P
ow er D
is si pa tio
n P
D
(
m W
)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
PS2801-4
PS2801-1
0.6 mW/°C
0.8 mW/°C
PS2801-1
PS2801-4 1.2 mW/°C
10050 75250
200
50
150
100
Ambient Temperature TA (°C)
T
ra ns is to r P
ow er D
is si pa tio
n P
C
(
m W
)
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
0°C
–25°C
–55°C
TA = +100°C
+60°C
+25°C
50
100
0.1
5
1
10
0.5
0.7 0.9 1.1 1.40.8 1.0 1.2 1.3 1.5
Forward Voltage VF (V)
F
or w ar d C
ur re nt I
F
(
m A
)
FORWARD CURRENT vs.
FORWARD VOLTAGE
IF = 5 mA
50
m A
10
mA20
m A
70
0
50
60
30
40
10
20
42 86 10
Collector to Emitter Voltage VCE (V)
C
ol le ct or C
ur re nt I
C
(
m A
)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
100
10 000
1 000
10
1
–50 –25 0 10025 50 75
Ambient Temperature TA (°C)
C
ol le ct or to E
m itt
er D
ar k C
ur re nt I
C
E
O
(
nA )
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
VCE = 80 V
40 V
24 V
10 V
5 V
IF = 1 mA
50 mA
20 mA
10 mA
5 mA
2 mA
1
10
40
5
0.5
0.1
0 0.2 1.00.4 0.6 0.8
Collector Saturation Voltage VCE (sat) (V)
C
ol le ct or C
ur re nt I
C
(
m A
)
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
Remark The graphs indicate nominal characteristics.

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 7 of 14
Jan 23, 2013
FREQUENCY RESPONSE
Frequency f (kHz)
N
or m al iz ed G
ai n G
v –10
–20
–15
0
–5
0.5 2 10 20 5001 5 50 100 200
IF = 5 mA,
VCE = 5 V
RL = 1 kΩ 100 Ω
300 Ω
Normalized to 1.0
at TA = 25°C,
IF = 5 mA, VCE = 5 V
–50 0 100–25 25 50 75
0.0
0.6
1.2
0.2
0.4
1.0
0.8
Ambient Temperature TA (°C)
N
or m al iz ed C
ur re nt T
ra ns fe r R
at io C
T
R
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
tf ts tr td VCC = 5 V,
IC = 2 mA,
CTR = 236%
0.01 0.05 0.1 0.5 1 5 10
0.1
100
50
10
5
1
0.5
Load Resistance RL (kΩ)
SWITCHING TIME vs.
LOAD RESISTANCE
VCC = 5 V,
IF = 5 mA,
CTR = 236%
0.1 1 10 100
1
0.1
10
100
1 000
Load Resistance RL (kΩ)
SWITCHING TIME vs.
LOAD RESISTANCE
S
w itc
hi ng T
im e t (
s )
μ
S
w itc
hi ng T
im e t (
s )
μ
tf ts tr td 0.02 1000.1 1.0 10
100
200
50
150
250
300
Forward Current IF (mA)
C
ur re nt T
ra ns fe r R
at io C
T
R
(
%
)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
VCE = 5 V,
n = 3
Remark The graphs indicate nominal characteristics.
PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 8 of 14
Jan 23, 2013
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2φ
21.0±0.8φ
Tape Direction
PS2801-1-F3
301
R
1 301
R
1 301
R
1 301
R
1 301
R
1
Outline and Dimensions (Tape)
1.55±0.1
4.0±0.1
2.0±0.1
4.0±0.1 1.
75
0.
1
2.8 MAX.
7.
55
0.
1
0.3
7.

0.
1
16
.0
0.
3
2.85±0.1 2.3±0.1
1.5+0.1–0 φ
33

2.
0
φ 10

1.
0
φ
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 9 of 14
Jan 23, 2013
Tape Direction
PS2801-4-F3
Outline and Dimensions (Reel)
Packing: 2 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2φ
21.0±0.8φ
Outline and Dimensions (Tape)
1.55±0.1
12.0±0.1
2.0±0.1
4.0±0.1 1.
75
0.
1
16
.0
0.
3
8.3±0.1
2.8 MAX.
10
.7
0.
1
0.3
2.3±0.1
7.

0.
1
1.5+0.1–0 φ
33

2.
0
φ 10

1.
0
φ
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 10 of 14
Jan 23, 2013
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
0.
8
1.
27
1.45
6.25
Remark All dimensions in this figure must be evaluated before use.

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 11 of 14
Jan 23, 2013
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The
flux with a maximum chlorine content of 0.2 Wt% is
recommended.)
120±30 s
(preheating)
220°C
180°C
P
ac ka ge S
ur fa ce T
em pe ra tu re T
(
°C
)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260°C MAX.
120°C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic
mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 12 of 14
Jan 23, 2013
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according to
product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below
IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like
into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 13 of 14
Jan 23, 2013
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Spec. Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
Upr = 1.6 × UIORM, Pd < 5 pC
UIORM
Upr
705
1 128
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC
Upr 1 322 Vpeak
Highest permissible overvoltage UTR 6 000 Vpeak
Degree of pollution (DIN EN 60664-1 VDE 0110 Part 1) 2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303
Part 11))
CTI 175
Material group (DIN EN 60664-1 VDE 0110 Part 1) III a
Storage temperature range Tstg −55 to +150 °C
Operating temperature range TA −55 to +100 °C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
150
300
500
109
°C
mA mW Ω

PS2801-1, PS2801-4
R08DS0096EJ0500 Rev.5.00 Page 14 of 14
Jan 23, 2013
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Revision History PS2801-1, PS2801-4 Data Sheet
Description
Rev. Date Page Summary
1.00 Mar 31, 2003 − This data sheet was released as PN10251EJ01V0DS
5.00 Jan 17, 2013 Throughout Renesas format is applied to this data sheet.
p.1 The ordering number and safety standards are revised.
p.2 PHOTOCOUPLER CONSTRUCTION is added.
p.3 The explanation in MARKING EXAMPLE is revised.
p.4 ORDERING INFORMATION is modified with the revision of the safety
standards.
p.5 Turn-on Time (ton) and Turn-off Time (toff) are added to the table in
ELECTRICAL CHARACTERISTICS.
p.6 The graph of LONG TERM CTR DEGRADATION is deleted from those in
TYPICAL CHARACTERISTICS.
p.7 PS2801-1-F4 is deleted from Tape Direction image in TAPING
SPECIFICATIONS.
p.8 PS2801-4-F4 is deleted from Tape Direction image in TAPING
SPECIFICATIONS.
p.10 RECOMMENDED MOUNT PAD DIMENSIONS is added.
p.11 The note about temperature condition of the recommended soldering
conditions is deleted.
p.12 PROGRAMMABLE LOGIC CONTROLLERS EXMAPLE is deleted.
p.13 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT is changed to the
same as PS2801C.
Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
California Eastern Laboratories, Inc.
4590 Patrick Henry Drive, Santa Clara, California 95054, U.S.A.
Tel: +1-408-919-2500, Fax: +1-408-988-0279
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-651-700, Fax: +44-1628-651-804
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
SALES OFFICES
© 2012 Renesas Electronics Corporation. All rights reserved.
[Colophon 2.2]
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CEL:
PS2801-1-F4-A PS2801-1-F3-A PS2801-1-V-F3-P-A PS2801-4-A PS2801-1-A PS2801-1-P-A PS2801-1-L-A
PS2801-1-F3-K-A PS2801-1-F3-L-A PS2801-1-F3-P-A PS2801-4-F3-A PS2801-1-F3-Y-A PS2801-1-K-A PS2801-1-
V-F3-A PS2801-1-V-F3-Y-A PS2801-1-Y-A PS2801-1-F4-L-A PS2801-1-F4-P-A

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10