Rod Ends And Spherical Bearings

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

load, bearing, steel, spherical, bearings, ends, capacity, with, materials, normal, Bearing, Mating, Stainless, must, lubrication, this, that, between, type, which, Spherical, ring, free, alloys, copper, clearance, dimension, series, outer, life

Transcript

PERFECT QUALITY AND DYNAMICQUALITÄT UND DYNAMIK IN PERFEKTION
This catalog has been created with adequate care and all
data has been checked. All preceding versions are hereby
invalid. Liability for possible fault or incomplete data can
not be taken over.
Product images are only for illustration needs and
not for figuration of bearings.
For to configure applications use only technical data,
measure tables and measure drawings of these catalog. All catalogs issued previously to this one become invalid on publication of this catalog.
Our product program is subject to change without
notice, due to the permanent further development
and research of our products.
Our sales conditions of at a time valid price list and
confirmation of order are valid for all deliveries and any
other benefit of the trading commerce.
Editor:
ASK Kugellagerfabrik
Artur Seyfert GmbH
70825 Korntal-Münchingen
Tel. + 49 (0) 7 11 83 00 80
Fax + 49 (0) 7 11 83 00 85 00
Email: ask@askubal.de
Homepage: www.askubal.de
January 2012, Edition 4.0
All rights reserved.
Reprint, as well in extracts
are not permitted without our approval.
Rod ends and spherical bearings
Bearings and steel balls
ASK Bearing units
ASAHI Bearing units4
Metric cam follower bearings
Slide bushes
Shaft-hub-connections
2
1
3
5
6
7
Clevises and bolts8
Product program
A
S
K
P
ro d u c t p ro g ra m Rod ends dimension series K
Standard P. 1-10
Stainless steel P. 1-14
Stainless steel copper alloys free P. 1-18
Pneumatic P. 1-20
Pneumatic stainless steel P. 1-24
Pneumatic stainless steel copper alloys free P. 1-28
ASKUROL ball bearing P. 1-30
ASKUROL roller bearing P. 1-32
RS P. 1-34
Spherical bearings dimension series K
Type G P. 1-38, 1-40
Type S P. 1-39, 1-41
Stainless steel type G P. 1-42, 1-44
Stainless steel type S P. 1-43, 1-45
Stainless steel type G copper alloys free P. 1-46
Stainless steel type S copper alloys free P. 1-47
RS P. 1-48
Rod ends dimension series E P. 1-50
Spherical bearings dimension series E,G,W P. 1-54
Rod ends and spherical bearings
Rod ends dimension series E
Spherical bearings dimension series E,G,W
ASKUROL
ball bearing
ASKUROL
roller bearing
RS
Standard
Stainless steel
Stainless steel
copper alloys free
Pneumatic
Pneumatic
stainless steel
Pneumatic
stainless steel
copper alloys free
Type S
Stainless steel
type S
Stainless steel
type S copper
alloys free
Type G
Stainless steel
type G
Stainless steel
type G copper
alloys free
RS
Spherical bearings dimension series K
Rod ends dimension series K
R
o d e n d s a n d s p h e ri c a l b e a ri n g s Pe r fec t qua l i t y and dynamic
1-2
Selection of rod end and spherical
bearing size
The selection and determination of spherical bearing and rod
end sizes in Schedule K must be based on the specified load
capacity, applied loads and requirements for useful life and
operating safety.
The load ratings specified in the tables serve as definitive
characteristic and arithmetic values for the load capacity of
the spherical bearings an rod ends.
Load ratings from different manufacturers cannot always be
compared with each other, since no standardised load rating
definition exists for spherical bearings an rod ends.
The following conditions are used as a basis for the load ratings
of Askubal heavy-duty spherical bearings and rod ends:
Static load capacity C0 (plain bearings)
The static load capacity C0 is the radially acting static load which
does not cause any permanent deformation of the components
when the spherical bearing or rod end is stationary, i.e. the
load condition without pivoting, swivelling or tilting movements. It is also a precondition here that the operating temperature must be in the normal room temperature range and the
surrounding components must possess sufficient stability.
The static load capacity may vary by lower or higher
temperature according to the material.
Static load capacity C0 (roller bearings)
In the case of Askurol rod ends with roller bearings, the static
load rating is the load at which the overall permanent
deformation of rolling elements and raceways is max. 0.0001
of the rolling element diameter.
Dynamic load capacity C (plain bearings)
Dynamic load ratings serve as arithmetic values for calculation
of the service life of dynamically-loaded spherical bearings
and rod ends. The values themselves do not provide any
information about the effective dynamic load capacity of the
spherical bearing or rod end. To obtain this information, it is
necessary to take into account the additional influencing
factors such as load type, swivel or tilt angle, speed
characteristic, max. permitted bearing clearance, max.
permitted bearing friction, lubrication conditions and
temperature, etc.
Dynamic load capacities depend on the definition used to
calculate them. Comparison of values is not always possible
owing to the different definitions used by various
manufacturers, and because the load capacities are often
determined under completely different test conditions.
Dynamic load capacity C (roller bearings)
In the case of Askurol rod ends with roller bearings, the
dynamic load capacity is the load at which 90% of a large
quantity of identical rod ends reach 1 million revolutions
before they fail owing to fatigue of the rolling surfaces.
Operating temperature
All Askubal spherical bearings and rod ends can be used
without restriction in an operating temperature range of
between -10 °C bis +80 °C.
Different operating temperatures occur a decrease of load
capacity of the rod end housing and the bearing therefore the
useful life will be reduced too.
Rod end selection
When choosing a rod end be sure that the real load is allways explicitly less than the maximum load capacity of the
rod end.
Rod ends and spherical bearings
1-3
Load direction
The load is of prime importance in the selection of bearing
size, however the load direction is also important.
A differentiation is made between the following load
directions.
Bearing movement
A differentiation is made between the following bearing
movements in spherical bearings:
Swivelling
(oscillating)
Full pivot
(rotating)
Tilting and swivelling
or rotating
Radial load
Axial load
Combined load
Tilting
Pe r fec t qua l i t y and dynamic
1-4
Rod ends and spherical bearings
Housing load capacity
Depending on the load type, the following load factors must be taken into account for the permitted max. radial housing load
capacity Fr perm:
Load type Load factor SB Load factor SK
constant 1 0.7
pulsating 0.333 0.7
alternating 0.166 0.7
Zeit
Zeit
Zeit
The load factor SK is valid for rod ends with male thread and
lubricating hole or lubricating nipple.
The named load factors should be used to value the limited
load capacity. Load factors for shock load, also caused by
increasing the bearing clearance or by an additional load due
to simultaneous swivel movements are not included. The load
factor SK, which considers the weakening of the unit can only
be a rough reference value. In extreme operating conditions
specially in cases where the life and safety of individuals is
placed at risk, practice-orientated tests must be verified.
The permitted radial housing load capacity Fr perm is reduced
as follows:
Fr perm [kN] = stat. load C0 [kN] · SB · (SK)
Note: Caution! Special requirements must be fulfilled for
use of these components in aircraft. For this reason, we
can accept no product liability for applications of this kind.
Spherical bearing load capacity
A mounted spherical bearing has a considerably higher static
load capacity than a rod end housing, as can be seen in a
comparison of the static load ratings for rod ends and for the
equivalent spherical bearings.
Dynamic load
Basically an exact calculation of useful life is not possible,
because of the conditions of use and the factors of influence
which are often very hard to collect.
Therefore experiences of already performed and comparable
applications are highly important. To decide the size of bearing
you further have to consider the following criteria:
- the load capacity of the housing
- the selection of mating materials for the spherical bearing
We will best possibly support your selection. Please ask us for
help.
Bearing clearance
Bearing clearance is defined as the radial and axial freedom of
motion of the inner ring (see illustration).
Reduced or enlarged bearing clearances (C3 or C2) are
available on request.
In plain bearings the axial clearance could be several times
higher than the radial clearance.
1-5
Radial clearance
Spherical bearings to DIN ISO 12240-1, Dimension Series K
Bearing bore Mating materials steel on high-duty bronze Mating materials steel on PTFE
d C2* normal C3* C2* normal C3*
over incl. min max min max min max min max min max min max
mm µm
3 6 4 34 10 50 42 72 5 30 20 50 40 65
8 10 5 41 13 61 52 88 10 50 40 80 70 100
12 18 6 49 16 75 64 107 15 60 50 100 90 130
20 30 7 59 20 92 77 120 30 70 60 110 100 140
35 50 9 71 25 112 98 150 40 80 70 140 130 180
Spherical bearing to DIN ISO 12240-1, Dimension Series E
Bearing bore Mating materials steel on steel Mating materials steel on PTFE
d C2* normal C3* C2* normal C3*
over incl. min max min max min max min max min max min max
mm µm
2,5 12 8 32 32 68 68 104 0 25 0 32 15 45
12 20 10 40 40 82 82 124 0 30 0 40 20 60
20 35 12 50 50 100 100 150 0 35 0 50 25 65
35 60 15 60 60 120 120 180 0 40 0 60 30 80
60 90 18 72 72 142 142 212 0 50 0 72 35 90
90 140 18 85 85 165 165 245 0 60 0 85 40 100
Spherical bearing to DIN ISO 12240-1, Dimension Series G
Bearing bore Mating materials steel on steel
d C2* normal C3*
over incl. min max min max min max
mm µm
2.5 10 8 32 32 68 68 104
10 17 10 40 40 82 82 124
17 30 12 50 50 100 100 150
30 50 15 60 60 120 120 180
50 80 18 72 72 142 142 212
80 120 18 85 85 165 165 245
Spherical bearing to DIN ISO 12240-1, Dimension Series W
Bearing bore Mating materials steel on steel
d C2* normal C3*
over incl. min max min max min max
mm µm
2.5 12 8 32 32 68 68 104
12 20 10 40 40 82 82 124
20 32 12 50 50 100 100 150
32 50 15 60 60 120 120 180
50 90 18 72 72 142 142 212
90 125 18 85 85 165 165 245
*) on request
Radial clearance Axial clearance
Pe r fec t qua l i t y and dynamic
Rod ends to DIN ISO 12240-4, Dimension Series K
Bearing bore Mating materials steel Mating materials steel
on high-duty bronze on PTFE
d normal C3* normal C3*
over incl. min max min max min max min max
mm 3 6 2 34 12 65 3 35 10 50
8 10 3 41 20 78 5 40 15 55
12 18 3 49 25 93 5 45 15 65
20 30 4 59 30 103 10 55 20 75
35 50 5 71 35 125 10 60 20 80
Rod ends to DIN ISO 12240-4, Dimension Series E
Bearing bore Mating materials steel Mating materials steel
on steel on PTFE
d normal C3* normal C3*
over incl. min max min max min max min max
mm 2.5 12 16 68 34 104 0 25 10 40
12 20 20 82 41 124 0 30 10 55
20 35 25 100 50 150 0 35 15 60
1-6
Rod ends and spherical bearings
Tilt angle limitation
For all Askubal spherical bearings and Askurol rods ends,
the maximum tilt angle specified in the tables must not be
exceeded while mounting or during operation, otherwise the
bearing or washers and cover washers may be damaged.
The assembly must be constructed so that the rod end or
spherical bearing is effectively prevented from moving further
than the given angle (Fig. a). At the same time, however, no
major forces may be applied to the housing. It is also
important to ensure that there is always sufficient space
available for the seal (particularly with RS models), in order
to prevent contact with the surrounding components (Fig. b).
Fig. a)
Rod ends on antifriction bearing basis, mounting sizes to DIN ISO 12240-4
Bearing bore Ball bearing Roller bearing
d C2* normal C3* C2* normal C3*
over incl. min max min max min max min max min max min max
mm µm
30 5 30 15 40 35 50 10 30 20 50 45 60
*) nur auf Anfrage
Fig. b)
In antifriction bearings the axial clearance could be several times higher than the radial clearance.
1-7
Mounting instructions
Installation
All Askubal spherical bearings and rod ends are very high
precision, ready-to-fit bearing elements. For this reason, they
must be stored carefully and installed correctly. It is important
to comply with the following points:
1. The spherical bearings and rod ends must be kept in their
original packaging until shortly before their installation, so
that they continue to be effectively preserved for as long as
possible. Ensure during the installation process that foreign
particles are on no account allowed to enter the outer ring
of the bearing.
2. The forces required for installation and removal should on
no account be transmitted from the spherical form to the
bearing shells or raceways of the bearing outer ring.
3. In order for the spherical bearings to run smoothly, the sliding movement must take place between the sliding faces
of the bearing inner ring and outer ring. Sliding movements
on the shaft or in the housing cause damage and premature
failure. For this reason, it is essential for there to be an
interferance fit between the bearing housing and bearing
outer ring and between the bearing inner ring and the connection shaft. This can be achieved by using tight fits and
with axial tensioning of the bearing rings. However, the consequence of using tight fits is an alteration in the bearing
clearance. Too high interferance between the housing and
the bearing outer ring causes contraction of the outer ring.
Too high interferance between the connection shaft and the
inner ring causes the inner ring to expand.
Maintenance and lubrication
The useful life of all spherical bearings and rod ends with
metallic mating materials is greatly dependent on regular
lubrication. A one-off initial grease filling is only adequate if
operating loads are very low.
The effectiveness of lubrication is mainly dependent on the
load, type of load (constant, pulsating or alternating), the
swivel angle and sliding speed.
Numerous tests in our ASK laboratory have shown that small
swivel angles and both very low and very high sliding speeds
have an unfavourable effect on the formation of a film of
lubricant. A load which acts in one direction only is also
unfavourable compared to an alternating load.
To ensure optimum and even distribution of the lubricant,
initial lubrication and subsequent lubrication should be carried
out with the spherical bearing or rod end in an unloaded
condition.
Note
In order to avoid incompatibility of various lubricants that may
be used by ASK and the customer, spherical bearings and rod
ends are supplied only with an anticorrosive coating. For this
reason, spherical bearings and rod ends which need
main tenance should be given initial lubrication before
commissioning or directly after installation. We recommend
carrying out initial lubrication after a running-in time of approx.
1 hour. Whenever this lubrication is carried out, the bearing
must be in an unloaded condition, so that the lubricant can
spread without obstruction. Lubrication should continue until
the lubricant emerges between the bearing outer ring and the
inner ring. For rod ends with a female thread, it is also
advisable to fill the space in the shank thread with lubricant up
to the threaded connection journal before installation. This
reduces the amount of work involved in lubricating with the
lubricating nipple.
Mating materials steel
on high-duty bronze
We recommend using corrosion inhibiting, pressure-resistant
lithium-base greases or lithium complex metallic soap greases
for lubrication of this material combination. The operating
temperature range should be between -20°C and +110°C.
It is possible to reduce friction and increase the useful life of
components which are used under load conditions in the
upper limit range by using solid lubricants. These are available
on request.
Mating materials steel on PTFE
This material combination is distinguished by its low friction.
The antifriction film is made of a material which makes
lubrication unnecessary, so that maintenance-free operation
is possible.
Askurol antifriction bearings
Ball bearings: These rod ends are given permanent
lubri cation with a lithium soap grease.
Subsequent lubrication is not required. There
is, however, a version available for a swivel
angle of <5° which does require subsequent
lubrication.
Roller bearings: These rod ends are given initial lubrication
with a lithium soap grease. If they are used in
heavy operating conditions, these rod ends
can be relubricated through the fitted
lubricating nipples.
Pe r fec t qua l i t y and dynamic
1-8
Rod ends and spherical bearings
Lubricating nipple shapes
DIN-No.
DIN 3402 shape A
DIN 3402 shape D
DIN 3405 shape A
DIN 3405 shape D
DIN 71 412 shape A
DIN 71 412 shape B
Designation d D
indicate by ordering,
if deviates from standard
rod end mm
SN 3402 M 6 M 6
SN 3402 M 8 x 1 M 8 x 1
SN 3402 M 10 x 1 M 10 x 1
SN 3402 D 5.0 6.5
SN 3402 D 6 x 6.5 6.0 6.5
SN 3405 M 6 M 6
SN 3402 M 8 x 1 M 8 x 1
Lubricating nipple for standard rod ends
SN 3405 D 3.5 x 5 3.5 5.0
SN M 6
SN M 5
SNA 5 5.0 8.0
SNA M 8 x 1 M 8 x 1
SNA R 1/8
” R 1/8

SNB M 6
SNB M 8 x 1 M 8 x 1
Please note, that the use of a non standard lubricating nipple
(DIN 3405 shape D) causes a cross sectional variation for
housings with male thread which means a reduction of the
static load capacity C0.
1-9
You have problems which
have not been solved so far?
– Ask us!
threaded pin
DIN 914 M4x4
with Loctite 638
locked against
rotation
Pe r fec t qua l i t y and dynamic
1-10
Rod ends and spherical bearings
Mating Materials:
Steel on high-duty bronze
Maintenance required
Standard
DIN ISO 12240-4
dimension series K
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Sliding face made of high-duty bronze. Lubricant is distributed via the
lubrication groove in the outer ring.
Housing: Sizes 3 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is
pressed into the housing and caulked at both sides.
Lubrication
nipple: Sizes 3 and 5 without lubrication nipple. Sizes 6 to 50 lubrication nipple DIN 3405, shape D. Further lubrication nipple shapes available on
request.
Female thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KI 3 KIL 3 3 M3 6 4.50 5.1
KI 5 KIL 5 5 M5 8 6.00 7.7
KI 6 KIL 6 6 M6 9 6.75 8.9
KI 8 KIL 8 8 M8 12 9.00 10.3
KI 10 KIL 10 10 M10 14 10.50 12.9
KI 12 KIL 12 12 M12 16 12.00 15.4
KI 14 KIL 14 14 M14 19 13.50 16.8
KI 16 KIL 16 16 M16 21 15.00 19.3
KI 18 KIL 18 18 M18x1.5 23 16.50 21.8
KI 20 KIL 20 20 M20x1.5 25 18.00 24.3
KI 22 KIL 22 22 M22x1.5 28 20.00 25.8
KI 25 KIL 25 25 M24x2 31 22.00 29.5
KI 30 KIL 30 30 M30x2 37 25.00 34.8
KI 35 KIL 35 35 M36x2 43 28.00 37.7*
KI 40 KIL 40 40 M42x2 49 33.00 45.2*
KI 50 KIL 50 50 M48x2 60 45.00 56.6*
*) deviates from standard
Male thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KA 3 KAL 3 3 M3 6 4.50 5.1
KA 5 KAL 5 5 M5 8 6.00 7.7
KA 6 KAL 6 6 M6 9 6.75 8.9
KA 8 KAL 8 8 M8 12 9.00 10.3
KA 10 KAL 10 10 M10 14 10.50 12.9
KA 12 KAL 12 12 M12 16 12.00 15.4
KA 14 KAL 14 14 M14 19 13.50 16.8
KA 16 KAL 16 16 M16 21 15.00 19.3
KA 18 KAL 18 18 M18x1.5 23 16.50 21.8
KA 20 KAL 20 20 M20x1.5 25 18.00 24.3
KA 22 KAL 22 22 M22x1.5 28 20.00 25.8
KA 25 KAL 25 25 M24x2 31 22.00 29.5
KA 30 KAL 30 30 M30x2 37 25.00 34.8
KA 35 KAL 35 35 M36x2 43 28.00 37.7*
KA 40 KAL 40 40 M42x2 49 33.00 45.2*
KA 50 KAL 50 50 M48x2 60 45.00 56.6*
*) deviates from standard
1-11
Special versions: - Version -V:
as standard, but housing heat-treated,
for static load capacity see -V load rating stat C0
- Version -L:
as standard, but housing made from high-grade tempering steel (heat-treated),
for static load capacity see -L load rating stat C0
Further versions available on request. E.g.:
- Housing crack-tested
- Sliding face of inner ring hard chromium plated
- Special surface coating of housing
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W
Standard -V -L
Tilt angle Weight
mm mm mm mm mm mm mm mm kN kN kN ~° kg
15 6.5 8 7.9 21 8 28.5 7 4   13 0.008
19 9.0 11 11.1 27 8 36.5 9 6   13 0.017
21 10.0 13 12.7 30 9 40.5 11 7   13 0.025
25 12.5 16 15.8 36 12 48.5 14 12 16 21 13 0.043
29 15.0 19 19.0 43 15 57.5 17 15 19 27 13 0.072
33 17.5 22 22.2 50 18 66.5 19 23 25 35 13 0.107
37 20.0 25 25.4 57 21 75.5 22 24 34 46 15 0.160
43 22.0 27 28.5 64 24 85.5 22 34 43 57 15 0.210
47 25.0 31 31.7 71 27 94.5 27 39 49 77 15 0.295
51 27.5 34 34.9 77 30 102.5 30 42 50 78 15 0.380
55 30.0 37 38.1 84 33 111.5 32 54 70 101 15 0.490
61 33.5 42 42.8 94 36 124.5 36 60 78 131 15 0.650
71 40.0 50 50.8 110 45 145.5 41 82 107 182 15 1.150
81 46.0 58 57.1 125 56 165.5 50 96   16 1.600
91 53.0 65 66.6 142 60 187.5 55 145   17 2.400
117 65.0 75 82.5 160 65 218.5 65 209   12 5.000
d2 max.
dk h l1
min.
l2 < Standard -V -L
Tilt angle Weight
mm mm mm mm mm kN kN kN ~° kg
15 7.9 27 15 34.0 1   13 0.005
19 11.1 33 19 42.5 3   13 0.013
21 12.7 36 21 46.5 4   13 0.019
25 15.8 42 25 54.5 8 10 17 13 0.032
29 19.0 48 28 62.5 13 17 25 13 0.054
33 22.2 54 32 70.5 21 22 33 13 0.085
37 25.4 60 36 78.5 22 31 44 15 0.125
43 28.5 66 37 87.5 33 43 57 15 0.185
47 31.7 72 41 95.5 39 49 77 15 0.260
51 34.9 78 45 103.5 42 50 78 15 0.340
55 38.1 84 48 111.5 54 70 101 15 0.435
61 42.8 94 55 124.5 60 78 131 15 0.590
71 50.8 110 66 145.5 82 107 182 15 1.060
81 57.0 140 85 180.5 96   16 1.640
91 66.0 150 90 195.5 132   17 2.300
117 82.0 185 105 243.5 209   12 4.800
 not available
Load ratings static C0
Load ratings static C0
 not available
Pe r fec t qua l i t y and dynamic
1-12
Rod ends and spherical bearings
Mating materials:
Steel on PTFE
Maintenance-free
Standard
DIN ISO 12240-4
dimension series K
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting of PTFE.
Housing: Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing ia
pressed into the housing and caulked at both sides.
Female thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KI 5-D KIL 5-D 5 M5 8 6.00 7.7
KI 6-D KIL 6-D 6 M6 9 6.75 8.9
KI 8-D KIL 8-D 8 M8 12 9.00 10.3
KI 10-D KIL 10-D 10 M10 14 10.50 12.9
KI 12-D KIL 12-D 12 M12 16 12.00 15.4
KI 14-D KIL 14-D 14 M14 19 13.50 16.8
KI 16-D KIL 16-D 16 M16 21 15.00 19.3
KI 18-D KIL 18-D 18 M18x1.5 23 16.50 21.8
KI 20-D KIL 20-D 20 M20x1.5 25 18.00 24.3
KI 22-D KIL 22-D 22 M22x1.5 28 20.00 25.8
KI 25-D KIL 25-D 25 M24x2 31 22.00 29.5
KI 30-D KIL 30-D 30 M30x2 37 25.00 34.8
KI 35-D KIL 35-D 35 M36x2 43 28.00 37.7*
KI 40-D KIL 40-D 40 M42x2 49 33.00 45.2*
KI 50-D KIL 50-D 50 M48x2 60 45.00 56.6*
*) deviates from standard
Male thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KA 5-D KAL 5-D 5 M5 8 6.00 7.7
KA 6-D KAL 6-D 6 M6 9 6.75 8.9
KA 8-D KAL 8-D 8 M8 12 9.00 10.3
KA 10-D KAL 10-D 10 M10 14 10.50 12.9
KA 12-D KAL 12-D 12 M12 16 12.00 15.4
KA 14-D KAL 14-D 14 M14 19 13.50 16.8
KA 16-D KAL 16-D 16 M16 21 15.00 19.3
KA 18-D KAL 18-D 18 M18x1.5 23 16.50 21.8
KA 20-D KAL 20-D 20 M20x1.5 25 18.00 24.3
KA 22-D KAL 22-D 22 M22x1.5 28 20.00 25.8
KA 25-D KAL 25-D 25 M24x2 31 22.00 29.5
KA 30-D KAL 30-D 30 M30x2 37 25.00 34.8
KA 35-D KAL 35-D 35 M36x2 43 28.00 37.7*
KA 40-D KAL 40-D 40 M42x2 49 33.00 45.2*
KA 50-D KAL 50-D 50 M48x2 60 45.00 56.6*
*) deviates from standard
1-13
Special versions: - Version -DMS:
as standard, but outer ring made of brass
- Version -DV:
as standard, but housing heat-treated,
for static load capacity see -V load rating stat C0
- Version -DL:
as standard, but housing made from high-grade tempering steel (heat-treated),
for static load capacity see -L load rating stat C0
Further versions available on request. E.g.:
- Housing crack-tested
- Sliding face of inner ring hard chromium plated
- Special surface coating of housing
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W
Standard -V -L
Tilt angle Weight
mm mm mm mm mm mm mm mm kN kN kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6   13 0.017
21 10.0 13 12.7 30 9 40.5 11 7   13 0.025
25 12.5 16 15.8 36 12 48.5 14 12 16 21 13 0.043
29 15.0 19 19.0 43 15 57.5 17 15 19 27 13 0.072
33 17.5 22 22.2 50 18 66.5 19 23 25 35 13 0.107
37 20.0 25 25.4 57 21 75.5 22 24 34 46 15 0.160
43 22.0 27 28.5 64 24 85.5 22 34 43 57 15 0.210
47 25.0 31 31.7 71 27 94.5 27 39 49 77 15 0.295
51 27.5 34 34.9 77 30 102.5 30 42 50 78 15 0.380
55 30.0 37 38.1 84 33 111.5 32 54 70 101 15 0.490
61 33.5 42 42.8 94 36 124.5 36 60 78 131 15 0.650
71 40.0 50 50.8 110 45 145.5 41 82 107 182 15 1.150
81 46.0 58 57.1 125 56 165.5 50 96   16 1.600
91 53.0 65 66.6 142 60 187.5 55 132   17 2.400
117 65.0 75 82.5 160 65 218.5 65 209   12 5.000
d2 max.
dk h l1
min.
l2 < Standard -V -L
Tilt angle Weight
mm mm mm mm mm kN kN kN ~° kg
19 11.1 33 19 42.5 4   13 0.013
21 12.7 36 21 46.5 6   13 0.019
25 15.8 42 25 54.5 10 12 19 13 0.032
29 19.0 48 28 62.5 15 19 27 13 0.054
33 22.2 54 32 70.5 23 25 35 13 0.085
37 25.4 60 36 78.5 24 34 46 15 0.125
43 28.5 66 37 87.5 33 43 57 15 0.185
47 31.7 72 41 95.5 39 49 77 15 0.260
51 34.9 78 45 103.5 42 50 78 15 0.340
55 38.1 84 48 111.5 54 70 101 15 0.435
61 42.8 94 55 124.5 60 78 131 15 0.590
71 50.8 110 66 145.5 82 107 182 15 1.060
81 57.1 140 85 180.5 96   16 1.640
91 66.6 150 90 195.5 132   17 2.300
117 82.5 185 105 243.5 209   12 4.800
 not available
 not available
Load ratings static C0
Load ratings static C0
Pe r fec t qua l i t y and dynamic
1-14
Rod ends and spherical bearings
Mating materials:
Stainless steel on high-duty bronze
Maintenance required
Stainless steel
DIN ISO 12240-4
dimension series K
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Sliding face made of high-duty bronze. Lubricant is distributed via the
lubricating groove in the outer ring.
Housing: Stainless steel. The spherical bearing is pressed into the housing and
caulked at both sides.
Lubrication nipple: Size 5 without lubrication nipple. Sizes 6 to 30 lubricating nipple DIN
3405, shape D. Further lubricating nipple shapes available on request.
Female thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KI 5-NR KIL 5-NR 5 M5 8 6.00 7.7
KI 6-NR KIL 6-NR 6 M6 9 6.75 8.9
KI 8-NR KIL 8-NR 8 M8 12 9.00 10.3
KI 10-NR KIL 10-NR 10 M10 14 10.50 12.9
KI 12-NR KIL 12-NR 12 M12 16 12.00 15.4
KI 14-NR KIL 14-NR 14 M14 19 13.50 16.8
KI 16-NR KIL 16-NR 16 M16 21 15.00 19.3
KI 18-NR KIL 18-NR 18 M18x1.5 23 16.50 21.8
KI 20-NR KIL 20-NR 20 M20x1.5 25 18.00 24.3
KI 22-NR KIL 22-NR 22 M22x1.5 28 20.00 25.8
KI 25-NR KIL 25-NR 25 M24x2 31 22.00 29.5
KI 30-NR KIL 30-NR 30 M30x2 37 25.00 34.8
Male thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KA 5-NR KAL 5-NR 5 M5 8 6.00 7.7
KA 6-NR KAL 6-NR 6 M6 9 6.75 8.9
KA 8-NR KAL 8-NR 8 M8 12 9.00 10.3
KA 10-NR KAL 10-NR 10 M10 14 10.50 12.9
KA 12-NR KAL 12-NR 12 M12 16 12.00 15.4
KA 14-NR KAL 14-NR 14 M14 19 13.50 16.8
KA 16-NR KAL 16-NR 16 M16 21 15.00 19.3
KA 18-NR KAL 18-NR 18 M18x1.5 23 16.50 21.8
KA 20-NR KAL 20-NR 20 M20x1.5 25 18.00 24.3
KA 22-NR KAL 22-NR 22 M22x1.5 28 20.00 25.8
KA 25-NR KAL 25-NR 25 M24x2 31 22.00 29.5
KA 30-NR KAL 30-NR 30 M30x2 37 25.00 34.8
Sizes 18 and 22 only on request.
1-15
Special versions: - Version -R:
as standard, but inner ring hard chromium plated at sliding surface
Further versions are available on request
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6 13 0.017
21 10.0 13 12.7 30 9 40.5 11 7 13 0.025
25 12.5 16 15.8 36 12 48.5 14 10 13 0.043
29 15.0 19 19.0 43 15 57.5 17 13 13 0.072
33 17.5 22 22.2 50 18 66.5 19 15 13 0.107
37 20.0 25 25.4 57 21 75.5 22 22 15 0.160
43 22.0 27 28.5 64 24 85.5 22 28 15 0.210
47 25.0 31 31.7 71 27 94.5 27 35 15 0.295
51 27.5 34 34.9 77 30 102.5 30 41 15 0.380
55 30.0 37 38.1 84 33 111.5 32 51 15 0.490
61 33.5 42 42.8 94 36 124.5 36 58 15 0.650
71 40.0 50 50.8 110 45 145.5 41 80 15 1.150
d2 max.
dk h l1
min.
l2 <
Load rating static C0 Tilt angle Weight
mm mm mm mm mm kN ~° kg
19 11.1 33 19 42.5 3 13 0.013
21 12.7 36 21 46.5 4 13 0.019
25 15.8 42 25 54.5 6 13 0.032
29 19.0 48 28 62.5 11 13 0.054
33 22.2 54 32 70.5 15 13 0.085
37 25.4 60 36 78.5 22 15 0.125
43 28.5 66 37 87.5 28 15 0.185
47 31.7 72 41 95.5 35 15 0.260
51 34.9 78 45 103.5 41 15 0.340
55 38.1 84 48 111.5 51 15 0.435
61 42.8 94 55 124.5 58 15 0.590
71 50.8 110 66 145.5 80 15 1.060
Pe r fec t qua l i t y and dynamic
1-16
Rod ends and spherical bearings
Mating materials:
Stainless steel on PTFE
Maintenance-free
Stainless steel
DIN ISO 12240-4
dimension series K
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Brass lined with an antifriction film, consisting of PTFE,
outer diameter ground.
Housing: Stainless steel. The spherical bearing is pressed into the housing and
caulked at both sides.
Female thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KI 5-DNR KIL 5-DNR 5 M5 8 6.00 7.7
KI 6-DNR KIL 6-DNR 6 M6 9 6.75 8.9
KI 8-DNR KIL 8-DNR 8 M8 12 9.00 10.3
KI 10-DNR KIL 10-DNR 10 M10 14 10.50 12.9
KI 12-DNR KIL 12-DNR 12 M12 16 12.00 15.4
KI 14-DNR KIL 14-DNR 14 M14 19 13.50 16.8
KI 16-DNR KIL 16-DNR 16 M16 21 15.00 19.3
KI 18-DNR KIL 18-DNR 18 M18x1.5 23 16.50 21.8
KI 20-DNR KIL 20-DNR 20 M20x1.5 25 18.00 24.3
KI 22-DNR KIL 22-DNR 22 M22x1.5 28 20.00 25.8
KI 25-DNR KIL 25-DNR 25 M24x2 31 22.00 29.5
KI 30-DNR KIL 30-DNR 30 M30x2 37 25.00 34.8
Male thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KA 5-DNR KAL 5-DNR 5 M5 8 6.00 7.7
KA 6-DNR KAL 6-DNR 6 M6 9 6.75 8.9
KA 8-DNR KAL 8-DNR 8 M8 12 9.00 10.3
KA 10-DNR KAL 10-DNR 10 M10 14 10.50 12.9
KA 12-DNR KAL 12-DNR 12 M12 16 12.00 15.4
KA 14-DNR KAL 14-DNR 14 M14 19 13.50 16.8
KA 16-DNR KAL 16-DNR 16 M16 21 15.00 19.3
KA 18-DNR KAL 18-DNR 18 M18x1.5 23 16.50 21.8
KA 20-DNR KAL 20-DNR 20 M20x1.5 25 18.00 24.3
KA 22-DNR KAL 22-DNR 22 M22x1.5 28 20.00 25.8
KA 25-DNR KAL 25-DNR 25 M24x2 31 22.00 29.5
KA 30-DNR KAL 30-DNR 30 M30x2 37 25.00 34.8
Sizes 18 and 22 only on request.
1-17
Special versions: - Version -DR:
as standard, but inner ring hard chromium plated at sliding surface
Further versions are available on request
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6 13 0.017
21 10.0 13 12.7 30 9 40.5 11 7 13 0.025
25 12.5 16 15.8 36 12 48.5 14 10 13 0.043
29 15.0 19 19.0 43 15 57.5 17 13 13 0.072
33 17.5 22 22.2 50 18 66.5 19 15 13 0.107
37 20.0 25 25.4 57 21 75.5 22 22 15 0.160
43 22.0 27 28.5 64 24 85.5 22 28 15 0.210
47 25.0 31 31.7 71 27 94.5 27 35 15 0.295
51 27.5 34 34.9 77 30 102.5 30 41 15 0.380
55 30.0 37 38.1 84 33 111.5 32 51 15 0.490
61 33.5 42 42.8 94 36 124.5 36 58 15 0.650
71 40.0 50 50.8 110 45 145.5 41 80 15 1.150
d2 max.
dk h l1
min.
l2 <
Load rating static C0 Tilt angle Weight
mm mm mm mm mm kN ~° kg
19 11.1 33 19 42.5 4 13 0.013
21 12.7 36 21 46.5 6 13 0.019
25 15.8 42 25 54.5 8 13 0.032
29 19.0 48 28 62.5 12 13 0.054
33 22.2 54 32 70.5 15 13 0.085
37 25.4 60 36 78.5 22 15 0.125
43 28.5 66 37 87.5 28 15 0.185
47 31.7 72 41 95.5 35 15 0.260
51 34.9 78 45 103.5 41 15 0.340
55 38.1 84 48 111.5 51 15 0.435
61 42.8 94 55 124.5 58 15 0.590
71 50.8 110 66 145.5 80 15 1.060
Pe r fec t qua l i t y and dynamic
1-18
Rod ends and spherical bearings
Mating materials:
Stainless steel on PTFE
Maintenance-free
Stainless steel
copper alloys free
DIN ISO 12240-4
series K
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Stainless steel lined with an antifriction film, consisting of PTFE, outer
diameter ground.
Housing: Stainless steel. The spherical bearing is pressed into the housing and
caulked at both sides.
Female thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KI 5-DNRBF KIL 5-DNRBF 5 M5 8 6.00 7.7
KI 6-DNRBF KIL 6-DNRBF 6 M6 9 6.75 8.9
KI 8-DNRBF KIL 8-DNRBF 8 M8 12 9.00 10.3
KI 10-DNRBF KIL 10-DNRBF 10 M10 14 10.50 12.9
KI 12-DNRBF KIL 12-DNRBF 12 M12 16 12.00 15.4
KI 14-DNRBF KIL 14-DNRBF 14 M14 19 13.50 16.8
KI 16-DNRBF KIL 16-DNRBF 16 M16 21 15.00 19.3
KI 18-DNRBF KIL 18-DNRBF 18 M18x1.5 23 16.50 21.8
KI 20-DNRBF KIL 20-DNRBF 20 M20x1.5 25 18.00 24.3
KI 22-DNRBF KIL 22-DNRBF 22 M22x1.5 28 20.00 25.8
KI 25-DNRBF KIL 25-DNRBF 25 M24x2 31 22.00 29.5
KI 30-DNRBF KIL 30-DNRBF 30 M30x2 37 25.00 34.8
Male thread
Designation d d3 B C1 d1
<
Righthand thread Lefthand thread mm mm mm mm mm
KA 5-DNRBF KAL 5-DNRBF 5 M5 8 6.00 7.7
KA 6-DNRBF KAL 6-DNRBF 6 M6 9 6.75 8.9
KA 8-DNRBF KAL 8-DNRBF 8 M8 12 9.00 10.3
KA 10-DNRBF KAL 10-DNRBF 10 M10 14 10.50 12.9
KA 12-DNRBF KAL 12-DNRBF 12 M12 16 12.00 15.4
KA 14-DNRBF KAL 14-DNRBF 14 M14 19 13.50 16.8
KA 16-DNRBF KAL 16-DNRBF 16 M16 21 15.00 19.3
KA 18-DNRBF KAL 18-DNRBF 18 M18x1.5 23 16.50 21.8
KA 20-DNRBF KAL 20-DNRBF 20 M20x1.5 25 18.00 24.3
KA 22-DNRBF KAL 22-DNRBF 22 M22x1.5 28 20.00 25.8
KA 25-DNRBF KAL 25-DNRBF 25 M24x2 31 22.00 29.5
KA 30-DNRBF KAL 30-DNRBF 30 M30x2 37 25.00 34.8
Sizes 18 and 22 only on request.
1-19
Special versions: are available on request
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6 13 0.017
21 10.0 13 12.7 30 9 40.5 11 7 13 0.025
25 12.5 16 15.8 36 12 48.5 14 10 13 0.043
29 15.0 19 19.0 43 15 57.5 17 13 13 0.072
33 17.5 22 22.2 50 18 66.5 19 15 13 0.107
37 20.0 25 25.4 57 21 75.5 22 22 15 0.160
43 22.0 27 28.5 64 24 85.5 22 28 15 0.210
47 25.0 31 31.7 71 27 94.5 27 35 15 0.295
51 27.5 34 34.9 77 30 102.5 30 41 15 0.380
55 30.0 37 38.1 84 33 111.5 32 51 15 0.490
61 33.5 42 42.8 94 36 124.5 36 58 15 0.650
71 40.0 50 50.8 110 45 145.5 41 80 15 1.150
d2 max.
dk h l1
min.
l2 <
Load rating static C0 Tilt angle Weight
mm mm mm mm mm kN ~° kg
19 11.1 33 19 42.5 4 13 0.013
21 12.7 36 21 46.5 6 13 0.019
25 15.8 42 25 54.5 8 13 0.032
29 19.0 48 28 62.5 12 13 0.054
33 22.2 54 32 70.5 15 13 0.085
37 25.4 60 36 78.5 22 15 0.125
43 28.5 66 37 87.5 28 15 0.185
47 31.7 72 41 95.5 35 15 0.260
51 34.9 78 45 103.5 41 15 0.340
55 38.1 84 48 111.5 51 15 0.435
61 42.8 94 55 124.5 58 15 0.590
71 50.8 110 66 145.5 80 15 1.060
Pe r fec t qua l i t y and dynamic
1-20
Rod ends and spherical bearings
Mating materials:
Steel on high-duty bronze
Maintenance required
Pneumatic
Special version for
pneumatic cylinder
Inner ring: Antrifriction bearing steel, hardened, ground and polished.
Outer ring: Sliding face made of high-duty bronze. Lubricant is distributed via the
lubricating groove in the outer ring.
Housing: Sizes 5 to 12 free-cutting steel, sizes 16 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is
pressed into the housing and caulked at both sides.
Lubrication
nipple: Size 5 without lubricating nipple, sizes 6 to 50 lubricating nipple DIN
3405, shape D, further lubricating nipple shapes available on request.
Female thread
Designation d d3 B C1 d1
<
Righthand thread mm mm mm mm mm
KI 5-M4 5 M4 8 6.00 7.7
KI 6 6 M6 9 6.75 8.9
KI 8 8 M8 12 9.00 10.3
KI 10-M10x1.25 10 M10x1.25 14 10.50 12.9
KI 12-M12x1.25 12 M12x1.25 16 12.00 15.4
KI 16-M16x1.5 16 M16x1.5 21 15.00 19.3
KI 20 20 M20x1.5 25 18.00 24.3
KI 25 25 M24x2 31 22.00 29.5
KI 30-M27x2 30 M27x2 37 25.00 34.8
KI 35 35 M36x2 43 28.00 37.7
KI 40 40 M42x2 49 33.00 45.2
KI 50 50 M48x2 60 45.00 56.6
1-21
Special versions: - Version -V:
as standard, but housing heat-treated,
for static load capacity see -V load rating stat C0
Further versions are available on request. E.g.:
- Housing crack-tested
- Sliding face of inner ring hard chromium plated
- Special surface coating of housing
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W
Standard -V
Tilt angle Weight
mm mm mm mm mm mm mm mm kN kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6  13 0.016
21 10.0 13 12.7 30 9 40.5 11 7  13 0.025
25 12.5 16 15.8 36 12 48.5 14 12 16 13 0.043
29 15.0 19 19.0 43 15 57.5 17 15 19 13 0.072
33 17.5 22 22.2 50 18 66.5 19 23 25 13 0.107
43 22.0 27 28.5 64 24 85.5 22 34 36 15 0.210
51 27.5 34 34.9 77 30 102.5 30 42 50 15 0.380
61 33.5 42 42.8 94 36 124.5 36 60 78 15 0.650
70 40.0 50 50.8 110 45 145.5 41 82 107 15 1.150
81 46.0 58 57.1 125 56 165.5 50 96  16 1.600
91 53.0 65 66.6 142 60 187.5 55 145  17 2.400
117 65.0 75 82.5 160 65 218.5 65 209  12 5.000
Load ratings static C0
Pe r fec t qua l i t y and dynamic
1-22
Rod ends and spherical bearings
Mating materials:
Steel on PTFE
Maintenance-free
Pneumatic
Special version for
pneumatic cylinder
Inner ring: Antrifiction bearing steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting of PTFE, outer diameter
ground.
Housing: Sizes 5 to 12 free-cutting steel, sizes 16 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.
Female thread
Designation d d3 B C1 d1
<
Righthand thread mm mm mm mm mm
KI 5-DM4 5 M4 8 6.00 7.7
KI 6-D 6 M6 9 6.75 8.9
KI 8-D 8 M8 12 9.00 10.3
KI 10-DM10x1.25 10 M10x1.25 14 10.50 12.9
KI 12-DM12x1.25 12 M12x1.25 16 12.00 15.4
KI 16-DM16x1.5 16 M16x1.5 21 15.00 19.3
KI 20-D 20 M20x1.5 25 18.00 24.3
KI 25-D 25 M24x2 31 22.00 29.5
KI 30-DM27x2 30 M27x2 37 25.00 34.8
KI 35-D 35 M36x2 43 28.00 37.7
KI 40-D 40 M42x2 49 33.00 45.2
KI 50-D 50 M48x2 60 45.00 56.6
1-23
Special versions: - Version -DV:
as standard, but housing heat-treated,
for static load capacity see -V load rating stat C0
Further versions are available on request. E.g.:
- Housing crack-tested
- Sliding face of inner ring hard chromium plated
- Special surface coating of housing
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W
Standard -V
Tilt angle Weight
mm mm mm mm mm mm mm mm kN kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6  13 0.016
21 10.0 13 12.7 30 9 40.5 11 7  13 0.025
25 12.5 16 15.8 36 12 48.5 14 12 16 13 0.043
29 15.0 19 19.0 43 15 57.5 17 15 19 13 0.072
33 17.5 22 22.2 50 18 66.5 19 23 25 13 0.107
43 22.0 27 28.5 64 24 85.5 22 34 36 15 0.210
51 27.5 34 34.9 77 30 102.5 30 42 50 15 0.380
61 33.5 42 42.8 94 36 124.5 36 60 78 15 0.650
70 40.0 50 50.8 110 45 145.5 41 82 107 15 1.150
81 46.0 58 57.1 125 56 165.5 50 96  16 1.600
91 53.0 65 66.6 142 60 187.5 55 132  17 2.400
117 65.0 75 82.5 160 65 218.5 65 209  12 5.000
Load rating static C0
Pe r fec t qua l i t y and dynamic
1-24
Rod ends and spherical bearings
Mating materials:
Stainless steel on high-duty bronze
Maintenance required
Pneumatic stainless steel
Special version for
pneumatic cylinder
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Swaged around the inner ring, sliding face made of high-duty bronze.
Lubricant is distributed via the lubricating groove in the outer ring.
Housing: Stainless steel. The spherical bearing is pressed into the housing and
caulked at both sides.
Lubrication nipple: Size 5 without lubricating nipple, sizes 6 to 50 lubricating nipple DIN
3405, shape D, further lubricating nipple shapes on request.
Female thread
Designation d d3 B C1 d1
<
Righthand thread mm mm mm mm mm
KI 5-NRM4 5 M4 8 6.00 7.7
KI 6-NR 6 M6 9 6.75 8.9
KI 8-NR 8 M8 12 9.00 10.3
KI 10-NRM10x1.25 10 M10x1.25 14 10.50 12.9
KI 12-NRM12x1.25 12 M12x1.25 16 12.00 15.4
KI 16-NRM16x1.5 16 M16x1.5 21 15.00 19.3
KI 20-NR 20 M20x1.5 25 18.00 24.3
KI 25-NR 25 M24x2 31 22.00 29.5
KI 30-NRM27x2 30 M27x2 37 25.00 34.8
1-25
Special versions: - Version -R:
as standard, but inner ring hard chromium plated at sliding surface.
Further versions are available on request
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6 13 0.016
21 10.0 13 12.7 30 9 40.5 11 7 13 0.025
25 12.5 16 15.8 36 12 48.5 14 10 13 0.043
29 15.0 19 19.0 43 15 57.5 17 13 13 0.072
33 17.5 22 22.2 50 18 66.5 19 15 13 0.107
43 22.0 27 28.5 64 24 85.5 22 28 15 0.210
51 27.5 34 34.9 77 30 102.5 30 41 15 0.380
61 33.5 42 42.8 94 36 124.5 36 58 15 0.650
70 40.0 50 50.8 110 45 145.5 41 80 15 1.150
Pe r fec t qua l i t y and dynamic
1-26
Rod ends and spherical bearings
Mating materials:
Stainless steel on PTFE
Maintenance-free
Pneumatic stainless steel
Special version for
pneumatic cylinder
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Brass lined with an antifriction film, consisting of PTFE, outer diameter
ground.
Housing: Stainless steel. The spherical bearing is pressed into the housing and
caulked at both sides.
Female thread
Designation d d3 B C1 d1
<
Righthand thread mm mm mm mm mm
KI 5-DNRM4 5 M4 8 6.00 7.7
KI 6-DNR 6 M6 9 6.75 8.9
KI 8-DNR 8 M8 12 9.00 10.3
KI 10-DNRM10x1.25 10 M10x1.25 14 10.50 12.9
KI 12-DNRM12x1.25 12 M12x1.25 16 12.00 15.4
KI 16-DNRM16x1.5 16 M16x1.5 21 15.00 19.3
KI 20-DNR 20 M20x1.5 25 18.00 24.3
KI 25-DNR 25 M24x2 31 22.00 29.5
KI 30-DNRM27x2 30 M27x2 37 25.00 34.8
1-27
Special versions: - Version -DR:
as standard, but inner ring hard chromium plated at sliding surface
Further versions are available on request
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6 13 0.016
21 10.0 13 12.7 30 9 40.5 11 7 13 0.025
25 12.5 16 15.8 36 12 48.5 14 10 13 0.043
29 15.0 19 19.0 43 15 57.5 17 13 13 0.072
33 17.5 22 22.2 50 18 66.5 19 15 13 0.107
43 22.0 27 28.5 64 24 85.5 22 28 15 0.210
51 27.5 34 34.9 77 30 102.5 30 41 15 0.380
61 33.5 42 42.8 94 36 124.5 36 58 15 0.650
70 40.0 50 50.8 110 45 145.5 41 80 15 1.150
Pe r fec t qua l i t y and dynamic
1-28
Rod ends and spherical bearings
Mating materials:
Stainless steel on PTFE
Maintenance-free
Pneumatic stainless steel
copper alloys free
Special version for
pneumatic cylinder
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Stainless steel lined with an antifriction film, consisting of PTFE, cold
formed around inner ring, outer diameter ground.
Housing: Stainless steel. The spherical bearing is pressed into the housing and
caulked at both sides.
Female thread
Designation d d3 B C1 d1
<
Righthand thread mm mm mm mm mm
KI 5-DNRBFM4 5 M4 8 6.00 7.7
KI 6-DNRBF 6 M6 9 6.75 8.9
KI 8-DNRBF 8 M8 12 9.00 10.3
KI 10-DNRBFM10x1.25 10 M10x1.25 14 10.50 12.9
KI 12-DNRBFM12x1.25 12 M12x1.25 16 12.00 15.4
KI 16-DNRBFM16x1.5 16 M16x1.5 21 15.00 19.3
KI 20-DNRBF 20 M20x1.5 25 18.00 24.3
KI 25-DNRBF 25 M24x2 31 22.00 29.5
KI 30-DNRBFM27x2 30 M27x2 37 25.00 34.8
1-29
Special versions: available on request
d2 max.
d4 <
d5 dk h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
19 9.0 11 11.1 27 8 36.5 9 6 13 0.016
21 10.0 13 12.7 30 9 40.5 11 7 13 0.025
25 12.5 16 15.8 36 12 48.5 14 10 13 0.043
29 15.0 19 19.0 43 15 57.5 17 13 13 0.072
33 17.5 22 22.2 50 18 66.5 19 15 13 0.107
43 22.0 27 28.5 64 24 85.5 22 28 15 0.210
51 27.5 34 34.9 77 30 102.5 30 41 15 0.380
61 33.5 42 42.8 94 36 124.5 36 58 15 0.650
70 40.0 50 50.8 110 45 145.5 41 80 15 1.150
Pe r fec t qua l i t y and dynamic
1-30
Rod ends and spherical bearings
Ball bearing
Mounting sizes acc.
to DIN ISO 12240-4
dimension series K
Inner ring: Antifriction bearing steel, hardened, high precision machined.
Housing: Steel with bearing outer ring pressed into housing, raceway precision
ground.
Rolling element: Balls made from through-hardened, antifriction bearing steel.
Cover :฀฀฀฀฀฀฀฀ ฀ ฀ ฀caulked in housing.
Lubrication: The rod ends are given initial lubrication.
Note: With these rod ends, it is important to ensure that the tilt angle specified in the table it not exceeded, either while mounting or during operation, otherwise the cover washers may be damaged.
Female thread
Designation d d3 B C1 d1
<
d2 Righthand thread Lefthand thread mm mm mm mm mm mm
KUI 6-ZZ KUIL 6-ZZ 6 M6 9 6.75 8.0 21
KUI 8-ZZ KUIL 8-ZZ 8 M8 12 9.00 10.0 25
KUI 10-ZZ KUIL 10-ZZ 10 M10 14 10.50 12.4 29
KUI 12-ZZ KUIL 12-ZZ 12 M12 16 12.00 14.6 33
KUI 14-ZZ KUIL 14-ZZ 14 M14 19 13.50 16.4 37
KUI 16-ZZ KUIL 16-ZZ 16 M16 21 15.00 18.7 43
KUI 18-ZZ KUIL 18-ZZ 18 M18 x 1.5 23 16.50 22.0 47
KUI 20-ZZ KUIL 20-ZZ 20 M20 x 1.5 25 18.00 24.0 51
KUI 22-ZZ KUIL 22-ZZ 22 M22 x 1.5 28 20.00 26.0 55
KUI 25-ZZ KUIL 25-ZZ 25 M24 x 2 31 22.00 29.8 61
KUI 30-ZZ KUIL 30-ZZ 30 M30 x 2 37 25.00 35.6 71
Male thread
Designation d d3 B C1 d1
<
d2 Righthand thread Lefthand thread mm mm mm mm mm mm
KUA 6-ZZ KUAL 6-ZZ 6 M6 9 6.75 8.0 21
KUA 8-ZZ KUAL 8-ZZ 8 M8 12 9.00 10.0 25
KUA 10-ZZ KUAL 10-ZZ 10 M10 14 10.50 12.4 29
KUA 12-ZZ KUAL 12-ZZ 12 M12 16 12.00 14.6 33
KUA 14-ZZ KUAL 14-ZZ 14 M14 14 13.50 16.4 37
KUA 16-ZZ KUAL 16-ZZ 16 M16 21 15.00 18.7 43
KUA 18-ZZ KUAL 18-ZZ 18 M18x1 23 16.50 22.0 47
KUA 20-ZZ KUAL 20-ZZ 20 M20x1 25 18.00 24.0 51
KUA 22-ZZ KUAL 22-ZZ 22 M22x1 28 20.00 26.0 55
KUA 25-ZZ KUAL 25-ZZ 25 M24x2 31 22.00 29.8 61
KUA 30-ZZ KUAL 30-ZZ 30 M30x2 37 25.00 35.6 71
C1
d 1
W
d3 d l 3
B
a d5 d4 h 1
l 4
d2 C1
d 1
d l 1
B
a h l 2
d2 d3 1-31
Max. permissible speed: This is affected by the bearing load, the bearing clearance, the lubricant and heat output
and input.The maximum permissible speed given in the tables applies for apurely radial load,
normal bearing clearance tolerance, no external heat, an operating temperature which is not
above the limit, and a low and absolutely shock-free load.
Cabricating nipple: Size 6 to10: DIN 3405
Size 12 to 30: DIN 71412
Load ratings: calculated acc. to DIN ISO 76 and 281.
Special versions: available on request
d4 <
d5 h1 l3
min.
l4 <
W Limiting
speed bearing
dynamic
Load ratings
bearing
static C0
Tilt angle
mm mm mm mm mm mm min-1 kN kN ~°
10.0 13.0 30 9 40.5 11 1300 1.83 0.36 7
12.5 16.0 36 12 48.5 14 1250 3.08 0.69 7
15.0 19.0 43 15 57.5 17 1200 3.91 0.94 7
17.5 22.0 50 18 66.5 19 1150 4.90 1.23 7
20.0 25.0 57 21 75.5 22 1000 5.00 1.36 7
22.0 27.0 64 24 85.5 22 950 5.20 1.55 7
25.0 31.0 71 27 94.5 27 850 6.49 1.97 7
27.5 34.0 77 30 102.5 30 800 6.70 2.17 7
30.0 37.0 84 33 111.5 32 725 7.23 2.39 7
32.5 42.0 94 36 124.5 36 550 10.90 3.05 7
40.0 50.8 110 45 145.5 41 425 14.88 5.01 7
h l1
min.
l2 <
Limiting
speed bearing
dynamic C
Load ratings
bearing
static C0
Tilt angle
mm mm mm min-1 kN kN ~°
36 21 46.5 1300 1.83 0.36 7
42 25 54.5 1250 3.08 0.69 7
48 28 62.5 1200 3.91 0.94 7
54 32 70.5 1150 4.90 1.23 7
60 36 78.5 1000 5.00 1.36 7
66 37 87.5 950 5.20 1.55 7
72 41 95.5 850 6.49 1.97 7
78 45 103.5 800 6.70 2.17 7
84 48 111.5 725 7.23 2.39 7
94 55 124.5 550 10.90 3.05 7
110 66 145.5 425 14.88 5.01 7
Load ratings
Load ratings
Pe r fec t qua l i t y and dynamic
1-32
Rod ends and spherical bearings
Roller bearing
Mounting sizes acc.
to DIN ISO 12240-4
dimension series K
Female thread
d B
a l 3
d3 C1
d 1
W
d4 d5 l 4
d2 h 1
Designation d d3 B C1 d1
<
d2 max.
d4 Righthand thread Lefthand thread mm mm mm mm mm mm mm
Male thread
C1
l 2
d2 h B
d3 d 1
a Designation d d3 B C1 d1
<
d2 max.
h Righthand thread Lefthand thread mm mm mm mm mm mm mm
KA 20202-ZZ KAL 20202-ZZ 12 M12 16 12 14.6 33 54
KA 20203-ZZ KAL 20203-ZZ 16 M16 21 15 18.7 43 66
KA 20204-ZZ KAL 20204-ZZ 20 M20x1.5 25 18 24.15 51 78
KA 20205-ZZ KAL 20205-ZZ 25 M24x2 31 22 29.8 61 94
KA 20206-ZZ KAL 20206-ZZ 30 M30x2 37 25 35.6 71 110
Inner ring: Antifriction bearing steel, hardened, high precision machined.
Housing: Steel with bearing outer ring pressed into housing, raceway precision
ground.
Rolling element: Barrel roller bearings made from through-hardened, antrifriction bearing
steel.
Retainer: Synthetic material.
฀ :฀฀฀฀฀฀฀฀฀ ฀ ฀ ฀ ฀ ฀ .
Lubrication: The rod ends are given initail lubrication.
KI 20202-ZZ KIL 20202-ZZ 12 M12 16 12 14.6 33 17.5
KI 20203-ZZ KIL 20203-ZZ 16 M16 21 15 18.7 43 22.0
KI 20204-ZZ KIL 20204-ZZ 20 M20x1.5 25 18 24.15 51 27.5
KI 20205-ZZ KIL 20205-ZZ 25 M24x2 31 22 29.8 61 33.5
KI 20206-ZZ KIL 20206-ZZ 30 M30x2 37 25 35.6 71 40.0
C1
d B
l 1
d 1
a 1-33
Note: With these rod ends, it is important to ensure that the tilt angle specified
in the table it not exceeded, either while mounting or during operation,
otherwise the sealing washers may be damaged.
Max. permissible speed: This is affected by the bearing load, the bearing clearance, the lubricant
and heat output and input. The maximum permissible speed given in the
tables applies for apurely radial load, normal bearing clearance tolerance, no external heat, an operating temperature which is not above the
limit, and a low and absolutely shock-free load.
Cabricating nipple: DIN 71412
Load ratings: calculated acc. to DIN ISO 76 and 281
Special versions: full completement (without retainer) available on request
d5 h1 l3
min.
l4 <
W Limiting
speed bearing
dynamic
C
bearing
static C0
Tilt angle
mm mm mm mm mm min-1 kN kN ~°
l1 min.
l2 <
Limiting
speed bearing
dynamic
C
bearing
static C0
Tilt angle
mm mm min-1 kN kN ~°
32 70.5 950 9.55 7.70 7
37 87.5 650 9.55 8.10 7
45 104.5 550 14.90 13.40 7
55 124.5 400 23.12 21.85 5
66 145.5 300 28.82 26.20 7
Load ratings
Load ratings
22 50 18 66.5 19 950 9.55 7.70 7
27 64 24 85.5 22 650 9.55 8.10 7
34 77 30 103.5 30 550 14.99 13.40 7
42 94 36 124.5 36 400 23.12 21.85 5
50 110 45 145.5 41 300 28.82 26.20 7
Pe r fec t qua l i t y and dynamic
1-34
Rod ends and spherical bearings
Mating materials:
Steel on steel
Maintenance required
RS
Special version
adjustable clearance
RS sealing
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Made of heat-treated steel. Lubricant is distributed via the lubrication
groove in the outer ring.
Rubber bellows: Synthetic rubber.
Housing: Sizes 8 to 12 free-cutting steel, sizes 14 to 30 tempering steel (standardised), all sizes galvanized and chromatised.
Lubricating nipple: DIN 3405, shape D, further lubricating nipple shapes available on
request.
Tolerances: To DIN ISO 12240-4, schedule K, except: d = H8, B = +-0.3
Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the rubber bellows may be damaged. Replacement for
previous 2RS-version. Available on request.
Female thread
Designation d d3 B C1 d1
Righthand thread Lefthand thread mm mm mm mm mm
KI 8-RS KIL 8-RS 6 M8 19 9.0 11.00
KI 10-RS KIL 10-RS 8 M10 21 10.5 13.00
KI 12-RS KIL 12-RS 10 M12 23 12.0 15.50
KI 14-RS KIL 14-RS 12 M14 26 13.5 17.00
KI 16-RS KIL 16-RS 14 M16 28 15.0 19.50
KI 18-RS KIL 18-RS 16 M18x1.5 30 16.5 22.00
KI 20-RS KIL 20-RS 18 M20x1.5 32 18.0 24.50
KI 22-RS KIL 22-RS 20 M22x1.5 35 20.0 26.50
KI 25-RS KIL 25-RS 22 M24x2 38 22.0 29.50
KI 30-RS KIL 30-RS 25 M30x2 44 25.0 35.00
Male thread
Designation d d3 B C1 d1
Righthand thread Lefthand thread mm mm mm mm mm
KA 8-RS KAL 8-RS 6 M8 19 9.0 11.00
KA 10-RS KAL 10-RS 8 M10 21 10.5 13.00
KA 12-RS KAL 12-RS 10 M12 23 12.0 15.50
KA 14-RS KAL 14-RS 12 M14 26 13.5 17.00
KA 16-RS KAL 16-RS 14 M16 28 15.0 19.50
KA 18-RS KAL 18-RS 16 M18x1.5 30 16.5 22.00
KA 20-RS KAL 20-RS 18 M20x1.5 32 18.0 24.50
KA 22-RS KAL 22-RS 20 M22x1.5 35 20.0 26.50
KA 25-RS KAL 25-RS 22 M24x2 38 22.0 29.50
KA 30-RS KAL 30-RS 25 M30x2 44 25.0 35.00
1-35
Special versions: - Mating materials steel on high-duty bronze.
- Mating materials steel on steel with anti-friction coating.
Further versions are available on request.
d2 max.
d4 d5 h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm kN ~° kg
25 12.5 16 36 12 48.5 14 12 9 0.066
29 15.0 19 43 15 57.5 17 15 9 0.118
33 17.5 22 50 18 66.5 19 23 9 0.162
37 20.0 25 57 21 75.5 22 24 10 0.235
43 22.0 27 64 24 85.5 22 34 10 0.285
47 25.0 31 71 27 94.5 27 39 10 0.385
51 27.5 34 77 30 102.5 30 42 10 0.500
55 30.0 37 84 33 111.5 32 54 10 0.615
61 33.5 42 94 36 124.5 36 60 10 0.800
71 40.0 50 110 45 145.5 41 82 12 1.210
d2 max.
h l1
min.
l2 <
Load rating static C0 Tilt angle Weight
mm mm mm mm kN ~° kg
25 42 25 54.5 8 9 0.055
29 48 28 62.5 13 9 0.100
33 54 32 70.5 21 9 0.140
37 60 36 78.5 22 10 0.200
43 66 37 87.5 33 10 0.260
47 72 41 95.5 39 10 0.350
51 78 45 103.5 42 10 0.460
55 84 48 111.5 54 10 0.560
61 94 55 124.5 60 10 0.740
71 110 66 145.5 82 12 1.120
Pe r fec t qua l i t y and dynamic
1-36
Rod ends and spherical bearings
Mating materials:
Steel on PTFE
Maintenance-free
RS
Special version
RS sealing
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting PTFE.
Rubber bellows: Synthetic rubber.
Housing: Sizes 8 to 12 free-cutting steel, sizes 14 to 30 tempering steel (standardised), all sizes galvanized and chromatised.
Tolerances: Acc. To DIN ISO 12240-4, schedule K, except: d = H8, B = +-0.3
Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the rubber bellows may be damaged. Replacement for
previous 2RS-version. Available on request.
Female thread
Designation d d3 B C1 d1
Righthand thread Lefthand thread mm mm mm mm mm
KI 8-DRS KIL 8-DRS 6 M8 19 9.0 11.0
KI 10-DRS KIL 10-DRS 8 M10 21 10.5 13.0
KI 12-DRS KIL 12-DRS 10 M12 23 12.0 15.5
KI 14-DRS KIL 14-DRS 12 M14 26 13.5 17.0
KI 16-DRS KIL 16-DRS 14 M16 28 15.0 19.5
KI 18-DRS KIL 18-DRS 16 M18x1.5 30 16.5 22.0
KI 20-DRS KIL 20-DRS 18 M20x1.5 32 18.0 24.5
KI 22-DRS KIL 22-DRS 20 M22x1.5 35 20.0 26.5
KI 25-DRS KIL 25-DRS 22 M24x2 38 22.0 29.5
KI 30-DRS KIL 30-DRS 25 M30x2 44 25.0 35.0
Male thread
Designation d d3 B C1 d1
Righthand thread Lefthand thread mm mm mm mm mm
KA 8-DRS KAL 8-DRS 6 M8 19 9.0 11.0
KA 10-DRS KAL 10-DRS 8 M10 21 10.5 13.0
KA 12-DRS KAL 12-DRS 10 M12 23 12.0 15.5
KA 14-DRS KAL 14-DRS 12 M14 26 13.5 17.0
KA 16-DRS KAL 16-DRS 14 M16 28 15.0 19.5
KA 18-DRS KAL 18-DRS 16 M18x1.5 30 16.5 22.0
KA 20-DRS KAL 20-DRS 18 M20x1.5 32 18.0 24.5
KA 22-DRS KAL 22-DRS 20 M22x1.5 35 20.0 26.5
KA 25-DRS KAL 25-DRS 22 M24x2 38 22.0 29.5
KA 30-DRS KAL 30-DRS 25 M30x2 44 25.0 35.0
1-37
Special versions: available on request
d2 max.
d4 d5 h1 l3
min.
l4 <
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm kN ~° kg
25 12.5 16 36 12 48.5 14 12 9 0.066
29 15.0 19 43 15 57.5 17 15 9 0.118
33 17.5 22 50 18 66.5 19 23 9 0.162
37 20.0 25 57 21 75.5 22 24 10 0.235
43 22.0 27 64 24 85.5 22 34 10 0.285
47 25.0 31 71 27 94.5 27 39 10 0.385
51 27.5 34 77 30 102.5 30 42 10 0.500
55 30.0 37 84 33 111.5 32 54 10 0.615
61 33.5 42 94 36 124.5 36 60 10 0.800
71 40.0 50 110 45 145.5 41 82 12 1.210
d2 max.
h l1
min.
l2 <
Load rating static C0 Tilt angle Weight
mm mm mm mm kN ~° kg
25 42 25 54.5 10 9 0.055
29 48 28 62.5 15 9 0.100
33 54 32 70.5 23 9 0.140
37 60 36 78.5 24 10 0.200
43 66 37 87.5 33 10 0.260
47 72 41 95.5 39 10 0.350
51 78 45 103.5 42 10 0.460
55 84 48 111.5 54 10 0.560
61 94 55 124.5 60 10 0.740
71 110 66 145.5 82 12 1.120
Pe r fec t qua l i t y and dynamic
1-38
Rod ends and spherical bearings
Mating materials:
Steel on heavy-duty bronze
Maintenance required
Type G
DIN ISO 12240-1
dimension series K
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Outer diameter ground. Sliding face made of high-duty bronze. Lubricant
is distributed via the lubricating groove in the outer ring.
Lubrication: The lubricant enters the lubricating groove througth a cross hole in the
outer ring.
Special versions: are available on request e.g.:
- Sliding face of inner ring hard chromium plated.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
G 3 3 5.1 6 4.50 10 7.9 8 13 0.004
G 5 5 7.7 8 6.00 13 11.1 15 13 0.007
G 6 6 8.9 9 6.75 16 12.7 19 13 0.010
G 8 8 10.3 12 9.00 19 15.8 31 13 0.016
G 10 10 12.9 14 10.50 22 19.0 43 13 0.031
G 12 12 15.4 16 12.00 26 22.2 58 13 0.065
G 14 14 16.8 19 13.50 28 25.4 74 15 0.090
G 16 16 19.3 21 15.00 32 28.5 92 15 0.100
G 18 18 21.8 23 16.50 35 31.7 112 15 0.125
G 20 20 24.3 25 18.00 40 34.9 135 15 0.180
G 22 22 25.8 28 20.00 42 38.1 164 15 0.210
G 25 25 29.5 31 22.00 47 42.8 203 15 0.295
G 30 30 34.8 37 25.00 55 50.8 273 15 0.425
G 35 35 37.7* 43 28.00* 62* 57.1 344 16 0.500
G 40 40 45.2* 49 33.00* 75* 66.6 473 17 0.900
G 50 50 56.6* 60 45.00 90 82.5 798 12 1.640
*) deviates from standard
1-39
Mating materials:
Steel on heavy-duty bronze
Maintenance required
Type S
Special version
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Outer diameter ground. Sliding face made of high-duty bronze. Lubricant
is distributed via the lubricating groove in the outer ring.
Outer case: Free-cutting steel, outer diameter ground. Spherical bearing is pressed
into the outer case and secured at both sides against axial movement.
However the two outer rings should be axial supported at mounting.
Lubrication: The lubricant enters the lubricating groove througth a cross hole in the
outer case.
Special versions: are available on request e.g.:
- Sliding face of inner ring hard chromium plated.
- Outer case made of stainless steel.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
S 3 3 5.1 6 4.50 12 7.9 8 13 0.005
S 5 5 7.7 8 6.00 16 11.1 15 13 0.009
S 6 6 8.9 9 6.75 18 12.7 19 13 0.013
S 8 8 10.3 12 9.00 22 15.8 31 13 0.024
S 10 10 12.9 14 10.50 26 19.0 43 13 0.040
S 12 12 15.4 16 12.00 30 22.2 58 13 0.080
S 14 14 16.8 19 13.50 34 25.4 74 15 0.100
S 16 16 19.3 21 15.00 38 28.5 92 15 0.130
S 18 18 21.8 23 16.50 42 31.7 112 15 0.170
S 20 20 24.3 25 18.00 46 34.9 135 15 0.230
S 22 22 25.8 28 20.00 50 38.1 164 15 0.280
S 25 25 29.5 31 22.00 56 42.8 203 15 0.390
S 30 30 34.8 37 25.00 66 50.8 273 15 0.610
Pe r fec t qua l i t y and dynamic
1-40
Rod ends and spherical bearings
Mating materials:
Steel on PTFE
Maintenance-free
Type G
DIN ISO 12240-1
dimension series K
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting of PTFE, outer diameter
ground.
Special versions: are available on request e.g.:
- Sliding face of inner ring hard chromium plated.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
G 5-D 5 7.7 8 6.00 13 11.1 14 13 0.007
G 6-D 6 8.9 9 6.75 16 12.7 18 13 0.010
G 8-D 8 10.3 12 9.00 19 15.8 30 13 0.016
G 10-D 10 12.9 14 10.50 22 19.0 42 13 0.031
G 12-D 12 15.4 16 12.00 26 22.2 56 13 0.065
G 14-D 14 16.8 19 13.50 28 25.4 72 15 0.090
G 16-D 16 19.3 21 15.00 32 28.5 90 15 0.100
G 18-D 18 21.8 23 16.50 35 31.7 110 15 0.125
G 20-D 20 24.3 25 18.00 40 34.9 132 15 0.180
G 22-D 22 25.8 28 20.00 42 38.1 160 15 0.210
G 25-D 25 29.5 31 22.00 47 42.8 198 15 0.295
G 30-D 30 34.8 37 25.00 55 50.8 267 15 0.425
G 35-D 35 37.7* 43 28.00* 62* 57.1 336 16 0.500
G 40-D 40 45.2* 49 33.00* 75* 66.6 462 17 0.900
G 50-D 50 56.6* 60 45.00 90 82.5 780 12 1.640
*) deviates from standard
1-41
Mating materials:
Steel on PTFE
Maintenance-free
Type S
Special version
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting of PTFE, outer diameter
ground.
Outer case: Free-cutting steel, outer diameter ground. Spherical bearing is pressed
into the outer case and secured at both sides against axial movement.
Special versions: are available on request e.g.:
- Sliding face of inner ring hard chromium plated.
- Outer case made of stainless steel.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
S 5-D 5 7.7 8 6.00 16 11.1 14 13 0.009
S 6-D 6 8.9 9 6.75 18 12.7 18 13 0.013
S 8-D 8 10.3 12 9.00 22 15.8 30 13 0.024
S 10-D 10 12.9 14 10.50 26 19.0 42 13 0.040
S 12-D 12 15.4 16 12.00 30 22.2 56 13 0.080
S 14-D 14 16.8 19 13.50 34 25.4 72 15 0.110
S 16-D 16 19.3 21 15.00 38 28.5 90 15 0.130
S 18-D 18 21.8 23 16.50 42 31.7 110 15 0.170
S 20-D 20 24.3 25 18.00 46 34.9 132 15 0.230
S 22-D 22 25.8 28 20.00 50 38.1 160 15 0.280
S 25-D 25 29.5 31 22.00 56 42.8 198 15 0.390
S 30-D 30 34.8 37 25.00 66 50.8 267 15 0.610
Pe r fec t qua l i t y and dynamic
1-42
Rod ends and spherical bearings
Mating materials:
Stainless steel on
heavy-duty bronze
Maintenance required
Stainless steel
Type G
DIN ISO 12240-1
dimension series K
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Outer diameter ground. Sliding face made of high-duty bronze. Lubricant
is distributed via the lubricating groove in the outer ring.
Lubrication: The lubricant enters the lubricating groove through a cross hole in the
outer ring.
Special versions: - Version -R:
as standard, but inner ring hard chromium plated at sliding surface.
Further versions are available on request.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
G 5-NR 5 7.7 8 6.00 13 11.1 15 13 0.007
G 6-NR 6 8.9 9 6.75 16 12.7 19 13 0.010
G 8-NR 8 10.3 12 9.00 19 15.8 31 13 0.016
G 10-NR 10 12.9 14 10.50 22 19.0 43 13 0.031
G 12-NR 12 15.4 16 12.00 26 22.2 58 13 0.065
G 14-NR 14 16.8 19 13.50 28 25.4 74 15 0.090
G 16-NR 16 19.3 21 15.00 32 28.5 92 15 0.100
G 18-NR 18 21.8 23 16.50 35 31.7 112 15 0.125
G 20-NR 20 24.3 25 18.00 40 34.9 135 15 0.180
G 22-NR 22 25.8 28 20.00 42 38.1 164 15 0.210
G 25-NR 25 29.5 31 22.00 47 42.8 203 15 0.295
G 30-NR 30 34.8 37 25.00 55 50.8 273 15 0.425
1-43
Gleitpaarung:
Stahl auf Hochleistungsbronze
wartungspflichtig
Stainless steel
Special version type S
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Outer diameter ground. Sliding face made of high-duty bronze. Lubricant
is distributed via the lubricating groove in the outer ring.
Outer case: Stainless steel, outer diameter ground. Spherical bearing is pressed into
the outer case and secured at both sides against axial movement.
Lubrication: The lubricant enters the lubricating groove through a cross hole in the
outer case.
Special versions: - Version -R:
as standard, but inner ring hard chromium plated at sliding surface.
Further versions are available on request.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
S 6-NR 6 8.9 9 6.75 18 12.7 19 13 0.013
S 8-NR 8 10.3 12 9.00 22 15.8 31 13 0.024
S 10-NR 10 12.9 14 10.50 26 19.0 43 13 0.040
S 12-NR 12 15.4 16 12.00 30 22.2 58 13 0.080
S 14-NR 14 16.8 19 13.50 34 25.4 74 15 0.110
S 16-NR 16 19.3 21 15.00 38 28.5 92 15 0.130
S 18-NR 18 21.8 23 16.50 42 31.7 131 15 0.170
S 20-NR 20 24.3 25 18.00 46 34.9 157 15 0.230
S 22-NR 22 25.8 28 20.00 50 38.1 164 15 0.280
S 25-NR 25 29.5 31 22.00 56 42.8 203 15 0.390
S 30-NR 30 34.8 37 25.00 66 50.8 273 15 0.610
Pe r fec t qua l i t y and dynamic
1-44
Rod ends and spherical bearings
Mating materials:
Stainless steel on PTFE
Maintenance-free
Stainless steel
Type G
DIN ISO 12240-1
dimension series K
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting of PTFE, outer diameter
ground.
Special versions: - Version -DR:
as standard, but inner ring hard chromium plated at sliding surface.
Further versions are available on request.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
G 5-DNR 5 7.7 8 6.00 13 11.1 14 13 0.007
G 6-DNR 6 8.9 9 6.75 16 12.7 18 13 0.010
G 8-DNR 8 10.3 12 9.00 19 15.8 30 13 0.016
G 10-DNR 10 12.9 14 10.50 22 19.0 42 13 0.031
G 12-DNR 12 15.4 16 12.00 26 22.2 56 13 0.065
G 14-DNR 14 16.8 19 13.50 28 25.4 72 15 0.090
G 16-DNR 16 19.3 21 15.00 32 28.5 90 15 0.100
G 18-DNR 18 21.8 23 16.50 35 31.7 110 15 0.125
G 20-DNR 20 24.3 25 18.00 40 34.9 132 15 0.180
G 22-DNR 22 25.8 28 20.00 42 38.1 160 15 0.210
G 25-DNR 25 29.5 31 22.00 47 42.8 198 15 0.295
G 30-DNR 30 34.8 37 25.00 55 50.8 267 15 0.425
1-45
Mating materials:
Stainless steel on PTFE
Maintenance-free
Stainless steel
Special version type S
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting of PTFE, cold formed
around inner ring, outside diameter ground.
Outer case: Stainless steel, outer diameter ground. Spherical bearing is pressed into
the outer case and secured at both sides against axial movement.
Special versions: - Version -DR:
as standard, but inner ring hard chromium plated at sliding surface.
Further versions are available on request.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
S 6-DNR 6 8.9 9 6.75 18 12.7 18 13 0.013
S 8-DNR 8 10.3 12 9.00 22 15.8 30 13 0.024
S 10-DNR 10 12.9 14 10.50 26 19.0 42 13 0.040
S 12-DNR 12 15.4 16 12.00 30 22.2 56 13 0.080
S 14-DNR 14 16.8 19 13.50 34 25.4 72 15 0.110
S 16-DNR 16 19.3 21 15.00 38 28.5 90 15 0.130
S 18-DNR 18 21.8 23 16.50 42 31.7 110 15 0.170
S 20-DNR 20 24.3 25 18.00 46 34.9 132 15 0.230
S 22-DNR 22 25.8 28 20.00 50 38.1 160 15 0.280
S 25-DNR 25 29.5 31 22.00 56 42.8 198 15 0.390
S 30-DNR 30 34.8 37 25.00 66 50.8 267 15 0.610
Pe r fec t qua l i t y and dynamic
1-46
Rod ends and spherical bearings
Mating materials:
Stainless steel on PTFE
Maintenance-free
Stainless steel
copper alloys free
Type G
DIN ISO 12240-1
dimension series K
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Stainless steel lined with an antifriction film, consisting of PTFE,
outer diameter ground.
Special versions: are available on request.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
G 6-DNRBF 6 8.9 9 6.75 16 12.7 18 13 0.010
G 8-DNRBF 8 10.3 12 9.00 19 15.8 30 13 0.016
G 10-DNRBF 10 12.9 14 10.50 22 19.0 42 13 0.031
G 12-DNRBF 12 15.4 16 12.00 26 22.2 56 13 0.065
G 14-DNRBF 14 16.8 19 13.50 28 25.4 72 15 0.090
G 16-DNRBF 16 19.3 21 15.00 32 28.5 90 15 0.100
G 18-DNRBF 18 21.8 23 16.50 35 31.7 110 15 0.125
G 20-DNRBF 20 24.3 25 18.00 40 34.9 132 15 0.180
G 22-DNRBF 22 25.8 28 20.00 42 38.1 160 15 0.210
G 25-DNRBF 25 29.5 31 22.00 47 42.8 198 15 0.295
G 30-DNRBF 30 34.8 37 25.00 55 50.8 267 15 0.425
1-47
Mating materials:
Stainless steel on PTFE
Maintenance-free
Stainless steel
copper alloys free
Special version type S
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Stainless steel lined with an antifriction film, consisting of PTFE,
outer diameter ground.
Outer case: Stainless steel, outer diameter ground. Spherical bearing is pressed into
the outer case and secured at both sides against axial movement.
Special versions: are available on request.
Designation d d1
<
B C D dk Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm kN ~° kg
S 6-DNRBF 6 8.9 9 6.75 18 12.7 18 13 0.013
S 8-DNRBF 8 10.3 12 9.00 22 15.8 30 13 0.024
S 10-DNRBF 10 12.9 14 10.50 26 19.0 42 13 0.040
S 12-DNRBF 12 15.4 16 12.00 30 22.2 56 13 0.080
S 14-DNRBF 14 16.8 19 13.50 34 25.4 72 15 0.110
S 16-DNRBF 16 19.3 21 15.00 38 28.5 90 15 0.130
S 18-DNRBF 18 21.8 23 16.50 42 31.7 110 15 0.170
S 20-DNRBF 20 24.3 25 18.00 46 34.9 132 15 0.230
S 22-DNRBF 22 25.8 28 20.00 50 38.1 160 15 0.280
S 25-DNRBF 25 29.5 31 22.00 56 42.8 198 15 0.390
S 30-DNRBF 30 34.8 37 25.00 66 50.8 267 15 0.610
Pe r fec t qua l i t y and dynamic
1-48
Rod ends and spherical bearings
Mating materials:
Steel on steel
Maintenance required
RS
Special version
2RS sealing
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Made of heat-treated steel. Lubricant is distributed via the lubrication
groove in the outer ring.
Rubber bellows: Synthetic rubber.
Lubrication: The lubricant enters the lubricating groove through a cross hole in the
outer ring.
Tolerances: To DIN ISO 12240-1, schedule K, except: d = H8, B = +-0.3
Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the rubber bellows may be damaged. Replacement for
previous 2RS-version. Available on request.
Special - Mating materials steel on high-duty bronze
versions: - Mating materials steel on steel with anti-friction coating
Designation d d1
<
B C e Load rating static C0C1 Tilt angle Weight
Righthand thread mm mm mm mm mm kN ~° kg
S 8-RS 6 11.0 19 9.0 22 31 9 0.035
S 10-RS 8 13.0 21 10.5 26 43 9 0.065
S 12-RS 10 15.5 23 12.0 30 58 9 0.110
S 14-RS 12 17.0 26 13.5 34 74 10 0.150
S 16-RS 14 19.5 28 15.0 38 92 10 0.180
S 18-RS 16 22.5 30 16.5 42 112 10 0.225
S 20-RS 18 24.5 32 18.0 46 135 10 0.300
S 22-RS 20 26.5 35 20.0 50 164 10 0.350
S 25-RS 22 29.5 38 22.0 56 236 10 0.470
S 30-RS 25 35.0 44 25.0 66 273 12 0.690
1-49
Mating materials:
Steel on PFFE
Maintenance-free
RS
Special version
RS sealing
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Steel lined with an antifriction film, consisting PTFE.
Rubber bellows: Synthetic rubber.
Tolerances: Acc. To DIN ISO 12240-1, schedule K, except: d = H8, B = +-0.3
Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the rubber bellows may be damaged. Replacement for
previous 2RS-version. Available on request.
Designation d d1
<
B C e Load rating static C0 Tilt angle Weight
Righthand thread mm mm mm mm mm kN ~° kg
S 8-DRS 6 11.0 19 9.0 22 30 9 0.035
S 10-DRS 8 13.0 21 10.5 26 42 9 0.065
S 12-DRS 10 15.5 23 12.0 30 56 9 0.110
S 14-DRS 12 17.0 26 13.5 34 72 10 0.150
S 16-DRS 14 19.5 28 15.0 38 90 10 0.180
S 18-DRS 16 22.5 30 16.5 42 110 10 0.225
S 20-DRS 18 24.5 32 18.0 46 132 10 0.300
S 22-DRS 20 26.5 35 20.0 50 160 10 0.350
S 25-DRS 22 29.5 38 22.0 56 198 10 0.470
S 30-DRS 25 35.0 44 25.0 66 267 12 0.690
Pe r fec t qua l i t y and dynamic
1-50
Rod ends and spherical bearings
Mating materials:
Steel on steel
Maintenance required
DO
DIN ISO 12240-4
dimension series E
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for
assembly of inner ring.
Housing: Made of steel, all sizes galvanized and chormatised. The spherical
bearing is pressed into the housing and caulked at both sides.
Lubrication nipple: Sizes 6 to 15 without lubricating nipple, sizes 17 to 30 nipple DIN 3405,
shape D, further lubricating nipple shapes on request.
Female thread
Designation d d3 B C1
max,
d1 <
Righthand thread Lefthand thread mm mm mm mm mm
GIR 6-DO GIL 6-DO 6 M6 6 4.5 8
GIR 8-DO GIL 8-DO 8 M8 8 6.5 10
GIR 10-DO GIL 10-DO 10 M10 9 7.5 13
GIR 12-DO GIL 12-DO 12 M12 10 8.5 15
GIR 15-DO GIL 15-DO 15 M14 12 10.5 18
GIR 17-DO GIL 17-DO 17 M16 14 11.5 20
GIR 20-DO GIL 20-DO 20 M20x1.5 16 13.5 24
GIR 25-DO GIL 25-DO 25 M24x2 20 18.0 29
GIR 30-DO GIL 30-DO 30 M30x2 22 20.0 34
GIR 35-DO GIL 35-DO 35 M36x3 25 22.0 39
GIR 40-DO GIL 40-DO 40 M39x3 28 24.0 45
GIR 50-DO GIL 50-DO 50 M45x3 35 31.0 55
GIR 60-DO GIL 60-DO 60 M52x3 44 39.0 66
GIR 70-DO GIL 70-DO 70 M56x4 49 43.0 77
GIR 80-DO GIL 80-DO 80 M64x4 55 48.0 88
Male thread
Designation d d3 B C1
max.
d1 <
Righthand thread Lefthand thread mm mm mm mm mm
GAR 6-DO GAL 6-DO 6 M6 6 4.5 8
GAR 8-DO GAL 8-DO 8 M8 8 6.5 10
GAR 10-DO GAL 10-DO 10 M10 9 7.5 13
GAR 12-DO GAL 12-DO 12 M12 10 8.5 15
GAR 15-DO GAL 15-DO 15 M14 12 10.5 18
GAR 17-DO GAL 17-DO 17 M16 14 11.5 20
GAR 20-DO GAL 20-DO 20 M20x1.5 16 13.5 24
GAR 25-DO GAL 25-DO 25 M24x2 20 18.0 29
GAR 30-DO GAL 30-DO 30 M30x2 22 20.0 34
GAR 35-DO GAL 35-DO 35 M36x3 25 22.0 39
GAR 40-DO GAL 40-DO 40 M39x3 28 24.0 45
GAR 50-DO GAL 50-DO 50 M45x3 35 31.0 55
GAR 60-DO GAL 60-DO 60 M52x3 44 39.0 66
GAR 70-DO GAL 70-DO 70 M56x4 49 43.0 77
GAR 80-DO GAL 80-DO 80 M64x4 55 48.0 88
1-51
Special versions: available on request
d2 max.
d4 <
d5 max.
dk h1 l3
min.
l4 max.
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
22 11 14 10 30 11 43 11 8.1 13 0.021
25 13 17 13 36 15 50 13 12.9 15 0.039
30 16 20 16 43 15 60 16 17.6 12 0.061
35 19 23 18 50 18 69 18 24.5 10 0.096
41 22 27 22 61 21 83 21 36.0 8 0.162
47 25 31 25 67 24 92 27 45.0 10 0.233
54 28 36 29 77 30 106 30 60.0 9 0.324
65 35 44 35 94 36 128 36 83.0 7 0.625
75 42 52 40 110 45 149 46 110.0 6 0.976
84 47 60 47 125 60 169 55 146.0 6 1.520
94 52 67 53 142 65 191 60 180.0 7 2.060
114 62 77 66 160 68 219 70 290.0 6 3.570
137 70 90 80 175 70 246 80 450.0 6 5.630
162 80 100 92 200 80 284 85 610.0 6 8.330
182 95 112 105 230 85 324 95 750.0 6 13.040
d2 max.
dk h l1
min.
l2 max.
Load rating static C0 Tilt angle Weight
mm mm mm mm mm kN ~° kg
22 10 36 16 49 5.5 13 0.017
25 13 42 21 56 10.0 15 0.029
30 16 48 26 65 16.0 12 0.044
35 18 54 28 73 23.0 11 0.066
41 22 63 34 85 32.0 9 0.121
47 25 69 36 94 44.0 10 0.172
54 29 78 43 107 60.0 9 0.283
65 35 94 53 128 83.0 8 0.504
75 40 110 65 149 110.0 7 0.835
84 47 140 82 184 146.0 6 1.410
94 53 150 86 199 180.0 7 1.860
114 66 185 104 244 290.0 6 3.580
137 80 210 115 281 450.0 6 5.730
162 92 235 125 319 610.0 6 7.940
182 105 270 140 364 750.0 6 12.060
Pe r fec t qua l i t y and dynamic
1-52
Rod ends and spherical bearings
Mating materials:
Steel on PTFE
Maintenance-free
UK
DIN ISO 12240-4
dimension series E
Inner ring: Antifriction bearing steel, hardened, ground and polished, raceway hard
chromium plated.
Outer ring: Free-cutting steel, lined with PTFE.
Housing: Made of steel, all sizes galvanized and chormatised. The spherical
bearing is pressed into the housing and caulked at both sides.
Female thread
Designation d d3 B C1
max.
d1 <
Righthand thread Lefthand thread mm mm mm mm mm
GIR 6-UK GIL 6-UK 6 M6 6 4.5 8
GIR 8-UK GIL 8-UK 8 M8 8 6.5 10
GIR 10-UK GIL 10-UK 10 M10 9 7.5 13
GIR 12-UK GIL 12-UK 12 M12 10 8.5 15
GIR 15-UK GIL 15-UK 15 M14 12 10.5 18
GIR 15-UK2RS GIL 15-UK2RS 15 M14 12 10.5 18
GIR 17-UK GIL 17-UK 17 M16 14 11.5 20
GIR 17-UK2RS GIL 17-UK2RS 17 M16 14 11.5 20
GIR 20-UK GIL 20-UK 20 M20x1.5 16 13.5 24
GIR 20-UK2RS GIL 20-UK2RS 20 M20x1.5 16 13.5 24
GIR 25-UK GIL 25-UK 25 M24x2 20 18.0 29
GIR 25-UK2RS GIL 25-UK2RS 25 M24x2 20 18.0 29
GIR 30-UK GIL 30-UK 30 M30x2 22 20.0 34
GIR 30-UK2RS GIL 30-UK2RS 30 M30x2 22 20.0 34
GIR 35-UK2RS GIL 35-UK2RS 35 M36x3 25 22.0 39
GIR 40-UK2RS GIL 40-UK2RS 40 M39x3 28 24.0 45
GIR 50-UK2RS GIL 50-UK2RS 50 M45x3 35 31.0 55
GIR 60-UK2RS GIL 60-UK2RS 60 M52x3 44 39.0 66
GIR 70-UK2RS GIL 70-UK2RS 70 M56x4 49 43.0 77
GIR 80-UK2RS GIL 80-UK2RS 80 M64x4 55 48.0 88
Male thread
Designation d d3 B C1
max.
d1 <
Righthand thread Lefthand thread mm mm mm mm mm
GAR 6-UK GAL 6-UK 6 M6 6 4.5 8
GAR 8-UK GAL 8-UK 8 M8 8 6.5 10
GAR 10-UK GAL 10-UK 10 M10 9 7.5 13
GAR 12-UK GAL 12-UK 12 M12 10 8.5 15
GAR 15-UK GAL 15-UK 15 M14 12 10.5 18
GAR 15-UK2RS GAL 15-UK2RS 15 M14 12 10.5 18
GAR 17-UK GAL 17-UK 17 M16 14 11.5 20
GAR 17-UK2RS GAL 17-UK2RS 17 M16 14 11.5 20
GAR 20-UK GAL 20-UK 20 M20x1.5 16 13.5 24
GAR 20-UK2RS GAL 20-UK2RS 20 M20x1.5 16 13.5 24
GAR 25-UK GAL 25-UK 25 M24x2 20 18.0 29
GAR 25-UK2RS GAL 25-UK2RS 25 M24x2 20 18.0 29
GAR 30-UK GAL 30-UK 30 M30x2 22 20.0 34
GAR 30-UK2RS GAL 30-UK2RS 30 M30x2 22 20.0 34
GAR 35-UK2RS GAL 35-UK2RS 35 M36x3 25 22.0 39
GAR 40-UK2RS GAL 40-UK2RS 40 M39x3 28 24.0 45
GAR 50-UK2RS GAL 50-UK2RS 50 M45x3 35 31.0 55
GAR 60-UK2RS GAL 60-UK2RS 60 M52x3 44 39.0 66
GAR 70-UK2RS GAL 70-UK2RS 70 M56x4 49 43.0 77
GAR 80-UK2RS GAL 80-UK2RS 80 M64x4 55 48.0 88
1-53
Special versions: available on request
d2 max.
d4 <
d5 max.
dk h1 l3
min.
l4 max.
W Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
22 11 14 10 30 11 43 11 8.1 13 0.021
25 13 17 13 36 15 50 13 12.9 15 0.039
30 16 20 16 43 15 60 16 17.6 12 0.061
35 19 23 18 50 18 69 18 24.5 10 0.096
41 22 27 22 61 21 83 21 36.0 8 0.160
41 22 27 22 61 21 83 21 36.0 8 0.160
47 25 31 25 67 24 92 27 45.0 10 0.230
47 25 31 25 67 24 92 27 45.0 10 0.230
54 28 36 29 77 30 106 30 60.0 9 0.320
54 28 36 29 77 30 106 30 60.0 9 0.320
65 35 44 35 94 36 128 36 83.0 7 0.620
65 35 44 35 94 36 128 36 83.0 7 0.620
75 42 52 40 110 45 149 46 110.0 6 0.970
75 42 52 40 110 45 149 46 110.0 6 0.970
84 47 60 47 125 60 169 55 146.0 6 1.500
94 52 67 53 142 65 191 60 180.0 7 2.100
114 62 77 66 160 68 219 70 290.0 6 3.500
137 70 90 80 175 70 246 80 450.0 6 5.600
162 80 100 92 200 80 284 85 610.0 6 8.300
182 95 112 105 230 85 324 95 750.0 6 13.000
d2 max.
dk h l1
min.
l2 max.
Load rating static C0 Tilt angle Weight
mm mm mm mm mm kN ~° kg
22 10 36 16 49 5.5 13 0.017
25 13 42 21 56 10.0 15 0.029
30 16 48 26 65 16.0 12 0.044
35 18 54 28 73 23.0 10 0.066
41 22 63 34 85 32.0 8 0.120
41 22 63 34 85 32.0 8 0.120
47 25 69 36 94 44.0 10 0.170
47 25 69 36 94 44.0 10 0.170
54 29 78 43 107 60.0 9 0.280
54 29 78 43 107 60.0 9 0.280
65 35 94 53 128 83.0 7 0.510
65 35 94 53 128 83.0 7 0.510
75 40 110 65 149 110.0 6 0.840
75 40 110 65 149 110.0 6 0.840
84 47 140 82 184 146.0 6 1.400
94 53 150 86 199 180.0 7 1.800
114 66 185 104 244 290.0 6 3.600
137 80 210 115 281 450.0 6 5.700
162 92 235 125 319 610.0 6 7.900
182 105 270 140 364 750.0 6 12.000
Pe r fec t qua l i t y and dynamic
1-54
Rod ends and spherical bearings
Mating materials:
Steel on steel
Maintenance required
DO
DIN ISO 12240-1
dimension series E
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for assembly of inner ring.
Lubrication: Sizes 6 to 15 without lubrication groove and lubrication hole. Form size
17 upwards, relubrication is also possible through the inner bore.
Designation d d1
<
B C D dk r1
min.
r2 min.
Load rating static C0 Tilt angle
<
Weight
mm mm mm mm mm mm mm mm kN ~° kg
GE 6-DO 6 8 6 4 14 10 0.3 0.3 17 13 0.004
GE 8-DO 8 10 8 5 16 13 0.3 0.3 27 15 0.008
GE 10-DO 10 13 9 6 19 16 0.3 0.3 40 12 0.011
GE 12-DO 12 15 10 7 22 18 0.3 0.3 53 10 0.015
GE 15-DO 15 18 12 9 26 22 0.3 0.3 84 8 0.027
GE 17-DO 17 20 14 10 30 25 0.3 0.3 106 10 0.041
GE 20-DO 20 24 16 12 35 29 0.3 0.3 146 9 0.066
GE 25-DO 25 29 20 16 42 35 0.6 0.6 240 7 0.119
GE 30-DO 30 34 22 18 47 40 0.6 0.6 310 6 0.153
GE 35-DO 35 39 25 20 55 17 0.6 1.0 399 6 0.233
GE 40-DO 40 45 28 22 62 53 0.6 1.0 495 7 0.306
GE 45-DO 45 50 32 25 68 60 0.6 1.0 637 7 0.427
GE 50-DO 50 55 35 28 75 66 0.6 1.0 780 6 0.939
GE 60-DO 60 66 44 36 90 80 1.0 1.0 1220 6 1.040
GE 70-DO 70 77 49 40 105 92 1.0 1.0 1560 6 1.550
GE 80-DO 80 88 55 45 120 105 1.0 1.0 2000 6 2.310
GE 90-DO 90 98 60 50 130 115 1.0 1.0 2440 5 2.750
GE 100-DO 100 109 70 55 150 130 1.0 1.0 3030 7 4.450
GE 110-DO 110 120 70 55 160 140 1.0 1.0 3270 6 4.820
GE 120-DO 120 130 85 70 180 160 1.0 1.0 4750 6 8.050
GE 140-DO 140 150 90 70 210 180 1.0 1.0 5350 7 11.020
GE 160-DO 160 170 105 80 230 200 1.0 1.0 6800 8 14.010
GE 180-DO 180 192 105 80 260 225 1.1 1.1 7650 6 18.650
GE 200-DO 200 212 130 100 290 250 1.1 1.1 10600 7 28.030
1-55
Mating materials:
Steel on steel
Maintenance required
FO
DIN ISO 12240-1
dimension series G
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for assembly of inner ring.
Lubrication: Lubrication groove and lubrication hole, relubrication is also possible
through the inner bore.
Designation d B C D dk r1 r2 Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm kN ~° kg
GE 20-FO 20 25 16 42 35.5 0.6 0.6 240 17 0.15
GE 25-FO 25 28 18 47 40.7 0.6 0.6 310 17 0.19
GE 30-FO 30 32 20 55 47.0 0.6 1.0 400 17 0.29
GE 35-FO 35 35 23 62 53.0 0.6 1.0 500 16 0.39
GE 40-FO 40 40 25 68 60.0 0.6 1.0 640 17 0.52
GE 45-FO 45 43 28 75 66.0 0.6 1.0 780 15 0.68
GE 50-FO 50 56 36 90 80.0 0.6 1.0 1120 17 1.40
GE 60-FO 60 63 40 105 92.0 1.0 1.0 1560 17 2.00
GE 70-FO 70 70 45 120 105.0 1.0 1.0 2000 16 2.90
GE 80-FO 80 75 50 130 115.0 1.0 1.0 2450 14 3.50
GE 90-FO 90 85 55 150 130.0 1.0 1.0 3050 15 5.40
GE 100-FO 100 85 55 160 140.0 1.0 1.0 3250 14 5.90
Per fec t qua l i t y and dynamic
1-56
Rod ends and spherical bearings
Mating materials:
Steel on steel
Maintenance required
LO
DIN ISO 12240-1
dimension series W
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for
assembly of inner ring.
Lubrication: Lubrication groove and lubrication hole, relubrication is also possible
through the inner bore.
Designation d d2
min.
B C D dk r1 r2 Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
GE 20-LO 20 25.0 20 12 35.0 29.0 0.3 0.3 146 4 0.070
GE 25-LO 25 30.0 25 16 42.0 35.5 0.6 0.6 240 4 0.120
GE 32-LO 32 38.0 32 18 52.0 44.0 0.6 1.0 335 4 0.200
GE 40-LO 40 46.0 40 22 62.0 53.0 0.6 1.0 500 4 0.340
GE 50-LO 50 57.0 50 28 75.0 66.0 0.6 1.0 780 4 0.560
GE 63-LO 63 71.5 63 36 95.0 83.0 0.1 1.0 1270 4 1.200
GE 70-LO 70 79.0 70 40 105.0 92.0 1.0 1.0 1560 4 1.700
GE 80-LO 80 91.0 80 45 120.0 105.0 1.0 1.0 2000 4 2.400
1-57
Mating materials:
Steel on PTFE
Maintenance-free
UK
DIN ISO 12240-1
dimension series E
Inner ring: Antifriction bearing steel, hardened, ground and polished.
Outer ring: Steel, lined with PTFE.
Sealing: Sealing rings at both sides.
Designation d d1
<
B C D dk r1
min.
r2 min.
Load rating static C0 Tilt angle
<
Weight
mm mm mm mm mm mm mm mm kN ~° kg
GE 6-UK 6 8 6 4 14 10 0.3 0.3 9 13 0.004
GE 8-UK 8 10 8 5 16 13 0.3 0.3 14 15 0.008
GE 10-UK 10 13 9 6 19 16 0.3 0.3 21 12 0.011
GE 12-UK 12 15 10 7 22 18 0.3 0.3 28 10 0.015
GE 15-UK 15 18 12 9 26 22 0.3 0.3 45 8 0.027
GE 17-UK 17 20 14 10 30 25 0.3 0.3 56 10 0.041
GE 17-UK2RS 17 20 14 10 30 25 0.3 0.3 60 10 0.041
GE 20-UK 20 24 16 12 35 29 0.3 0.3 78 9 0.066
GE 20-UK2RS 20 24 16 12 35 29 0.3 0.3 83 9 0.066
GE 25-UK 25 29 20 16 42 35 0.6 0.6 127 7 0.119
GE 25-UK2RS 25 29 20 16 42 35 0.6 0.6 137 7 0.119
GE 30-UK 30 34 22 18 47 40 0.6 0.6 166 6 0.153
GE 30-UK2RS 30 34 22 18 47 40 0.6 0.6 176 6 0.153
GE 35-UK2RS 35 39 25 20 55 17 0.6 1.0 224 6 0.233
GE 40-UK2RS 40 45 28 22 62 53 0.6 1.0 280 7 0.306
GE 45-UK2RS 45 50 32 25 68 60 0.6 1.0 360 7 0.427
GE 50-UK2RS 50 55 35 28 75 66 0.6 1.0 440 6 0.939
GE 60-UK2RS 60 66 44 36 90 80 1.0 1.0 695 6 1.040
GE 70-UK2RS 70 77 49 40 105 92 1.0 1.0 880 6 1.550
GE 80-UK2RS 80 88 55 45 120 105 1.0 1.0 1140 6 2.310
GE 90-UK2RS 90 98 60 50 130 115 1.0 1.0 1370 5 2.750
GE 100-UK2RS 100 109 70 55 150 130 1.0 1.0 1730 7 4.450
GE 110-UK2RS 110 120 70 55 160 140 1.0 1.0 1860 6 4.820
GE 120-UK2RS 120 130 85 70 180 160 1.0 1.0 2700 6 8.050
Per fec t qua l i t y and dynamic
1-58
Rod ends and spherical bearings
Mating materials:
Steel on PTFE
Maintananc-free
TGR
DIN ISO 12240-1
dimension series E
Inner ring: Stainless steel, hardened, ground and polished.
Outer ring: Stainless steel lined with PTFE, cold formed around the inner ring.
GE 8-TGR 8 10 8 5 16 13.0 0.5 0.5 15 15 0.008
GE 10-TGR 10 13 9 6 19 16.0 0.8 0.5 22 12 0.012
GE 12-TGR 12 15 10 7 22 18.0 0.8 0.8 29 11 0.017
GE 15-TGR 15 18 12 9 26 22.0 0.8 0.8 44 9 0.032
GE 17-TGR 17 20 14 10 30 25.0 0.8 0.8 56 10 0.049
GE 20-TGR 20 24 16 12 35 29.0 0.8 1.0 78 9 0.065
GE 25-TGR 25 29 20 16 42 35.5 0.8 1.0 127 8 0.115
GE 30-TGR 30 34 22 18 47 40.7 0.8 1.0 166 7 0.160
Designation d d1 B C D dk r1 r2 Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
1-59
Mating materials:
Steel on steel
Maintenance required
DO2RS
DIN ISO 12240-1
dimension series E
2RS sealing
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for
assembly of inner ring.
Sealing: Sealing rings at both sides.
Lubrication: Sizes 6 to 15 without lubrication groove and lubrication hole. Form size
17 upwards, relubrication is also possible through the inner bore.
GE 15-DO2RS 15 18 12 9 26 22.0 0.8 0.8 84 9 0.032
GE 17-DO2RS 17 20 14 10 30 25.0 0.8 0.8 106 10 0.049
GE 20-DO2RS 20 24 16 12 35 29.0 0.8 1.0 146 9 0.065
GE 25-DO2RS 25 29 20 16 42 35.5 0.8 1.0 240 8 0.115
GE 30-DO2RS 30 34 22 18 47 40.7 0.8 1.0 310 7 0.160
GE 35-DO2RS 35 39 25 20 55 47.0 1.0 1.2 399 7 0.258
GE 40-DO2RS 40 45 28 22 62 53.0 1.0 1.2 495 7 0.315
GE 45-DO2RS 45 50 32 25 68 60.0 1.0 1.2 637 8 0.413
GE 50-DO2RS 50 56 35 28 75 66.0 1.0 1.2 780 7 0.560
GE 60-DO2RS 60 66 44 36 90 80.0 1.2 1.5 1220 7 1.100
GE 70-DO2RS 70 77 49 40 105 92.0 1.2 1.5 1560 6 1.540
GE 80-DO2RS 80 89 55 45 120 105.0 1.2 1.5 2000 6 2.290
Designation d d1 B C D dk r1 r2 Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
Pe r fec t qua l i t y and dynamic
1-60
Rod ends and spherical bearings
Mating materials:
Steel on steel
Maintenance required
FO2RS
DIN ISO 12240-1
dimension series G
2RS-sealing
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for
assembly of inner ring.
Lubrication: Lubrication groove and lubrication hole, relubrication is also possible
through the inner bore.
Sealing: Sealing rings at both sides.
Designation d B C D dk r1 r2 Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm kN ~° kg
GE 20-FO2RS 20 25 16 42 35.5 0.6 0.6 240 17 0.15
GE 25-FO2RS 25 28 18 47 40.7 0.6 0.6 310 17 0.19
GE 30-FO2RS 30 32 20 55 47.0 0.6 1.0 400 17 0.29
GE 35-FO2RS 35 35 23 62 53.0 0.6 1.0 500 16 0.39
GE 40-FO2RS 40 40 25 68 60.0 0.6 1.0 640 17 0.52
GE 45-FO2RS 45 43 28 75 66.0 0.6 1.0 780 15 0.68
GE 50-FO2RS 50 56 36 90 80.0 0.6 1.0 1120 17 1.40
GE 60-FO2RS 60 63 40 105 92.0 1.0 1.0 1560 17 2.00
GE 70-FO2RS 70 70 45 120 105.0 1.0 1.0 2000 16 2.90
GE 80-FO2RS 80 75 50 130 115.0 1.0 1.0 2450 14 3.50
GE 90-FO2RS 90 85 55 150 130.0 1.0 1.0 3050 15 5.40
GE 100-FO2RS 100 85 55 160 140.0 1.0 1.0 3250 14 5.90
1-61
Mating materials:
Steel on steel
Maintenance required
HO2RS
2RS-sealing
Inner ring: Antifriction bearing steel, hardened, ground.
Outer ring: Antifriction bearing steel, hardened, ground. Outer ring is split for
assembly of inner ring.
Lubrication: Lubrication groove and lubrication hole, relubrication is also possible
through the inner bore.
Radial clearance: see technical basics, table spherical bearings dimension series E, mating
materials steel on steel.
Sealing: Sealing rings at both sides.
Designation d d2
min.
B C D dk r1 r2 Load rating static C0 Tilt angle Weight
mm mm mm mm mm mm mm mm kN ~° kg
GE 20-HO2RS 20 24.0 24 12 35 29.0 0.2 0.3 146 3 0.057
GE 25-HO2RS 25 29.0 29 16 42 35.5 0.2 0.6 240 3 0.100
GE 30-HO2RS 30 34.2 30 18 47 40.7 0.2 0.6 310 3 0.140
GE 35-HO2RS 35 40.0 35 20 55 47.0 0.3 1.0 400 3 0.240
GE 40-HO2RS 40 45.0 38 22 62 53.0 0.3 1.0 500 3 0.290
GE 45-HO2RS 45 51.5 40 25 68 60.0 0.3 1.0 640 3 0.430
GE 50-HO2RS 50 56.5 43 28 75 66.0 0.3 1.0 780 3 0.540
GE 60-HO2RS 60 67.7 54 36 90 80.0 0.3 1.0 1220 3 1.100
GE 70-HO2RS 70 78.0 65 40 105 92.0 0.3 1.0 1560 3 1.600
GE 80-HO2RS 80 90.0 74 45 120 105.0 0.3 1.0 2000 3 2.400
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
Deep groove ball bearings DIN 625 T1 P. 2-5
Deep groove ball bearings stainless steel DIN 625 T1 P. 2-15
Angular ball bearings DIN 628 T1 P. 2-17
Spindle bearings DIN 628 T1 P. 2-19
Self aligning ball bearings DIN 630 P. 2-20
Self aligning roller bearings DIN 635 T2 P. 2-22
McGill Self aligning roller bearings P. 2-23
Taper roller bearings with cylindrical bore DIN ISO 355 and DIN 720 P. 2-25
Deep groove ball thrust bearing DIN 711 P. 2-26
Steel balls P. 2-27
Deep groove ball bearings
Deep groove ball bearings
stainless steel
Angular ball bearings
Spindle bearings McGill Self aligning roller bearings
Self aligning roller bearings
Self aligning ball bearings
Taper roller bearings
with cylindrical bore
Deep groove ball thrust bearing
Steel balls
B
e a ri n g s a n d s te e l b a ll s Pe r fec t qua l i t y and dynamic
2-2
Bearings and steel balls
Technical information
Rolling bearing
- Blanket term for all bearings with roller bodies
Shapes of rolling bearings
- Rolling bearings are first and foremost categorized as ball
bearings or roller bearings according to the shape of the
roller body. Rolling bearings can generally withstand far
greater forces than ball bearings. On the other hand, ball
bearings have higher speeds than roller bearings.
Ball bearing (radial bearing)
- Ball bearings are categorized according to their typical
design characteristics:
Roller bearing (radial bearing)
- Roller bearings are categorized according to the shape of
the roller:
Axial bearing
- Only the axial bearings are marked with the prefix axial. I.e.,
if a designation does not contain this word, the bearing is
radial!
Bearing clearance
- The bearing clearance is the gap between the parts in a
roller bearing axially or radially. The bearing clearance is
standardized. Roller bearings are offered with various
bearing clearances depending on the type of bearing.
Generally, one speaks of standard clearance, greater than
standard clearance, and less than standard clearance.
Rolling bearing tolerances
- The tolerances of roller bearings are standardized according
to DIN 620 T1 to T6 and divided into various accuracy
classes. The accuracy classes are marked in the DIN norm
as normal, P6, P5, P4.
The accuracy increases as the number decreases!
Tolerances are the admissible values that deviate from
the nominal sizes.
Ball Cylinder roller Tapered roller Spherical roller Needle roller
Deep groove ball
bearings:
one or two grooves
in the inner and outer
ring
Angular ball bearings:
the load is transferred
from one ring to the
other via an angle
Self-aligning ball
bearings:
are able to compensate
for misalignments of
the shaft to the casing
to a certain extent
Cylinder
roller bearings:
can withstand
great forces
radially exerted
on the bearing
Needle roller
bearings:
can withstand
forces radially
exerted on the
bearing;
considerably smaller outer
diameter with the
same nominal
bore
Tapered roller
bearings:
can withstand
forces radially
and axially
exerted on the
bearing
Self-aligning
roller bearings:
formerly called
spherical roller
bearings; able to
compensate for
misalignments of
the shaft to the
casing to a
certain extent
Axial deep groove
ball bearing
Axial cylinder
roller bearing
Axial tapered
roller bearing
Axial swivel-joint
roller bearing
Added Bearing
designation clearance
C2 less than standard
C0 standard
C3 greater than standard
C4 greater than C3
C5 greater than C4
DIN-Norm
Normal
P6
higher quality
P5
P4
2-3
Designation of the rolling bearings
The outer dimensions of the rolling bearings are set forth in
DIN 616 in accordance with DIN ISO 355.
They are designed so that several outer diameters and widths
are assigned to each bearing bore to provide a large range of
load capacity for bearings with the same bore and design.
This designation system is also set forth in DIN 623.
A distinction is made between and the width rows:
the diameter rows:
0 (very light) 0
2 (light) 1
3 (medium) 2
4 (heavy) 3
These relations are made clear in the following graphic.
It should, however, be kept in mind that the standardized
bearing designations do not correspond to this system in all
cases.
Bearing abbreviations
A bearing abbreviation consists of numbers or of letters and
numbers. The first number or letter group indicates the
bearing design (deep groove ball bearing, tapered roller
bearing, self-aligning roller bearings, etc.)
and the width and diameter row (light, medium, heavy, etc.);
the second number group indicates the bore code.
The size of the bore of the bearing is a function of the
multi plication of the code by 5
(above a bore diameter ≥ 20 mm).
The bearing designations without the added designation
indicate normal bearings, for instance with normal size, shape
and run accuracy in accordance with the tolerances in DIN
620. Deviations are described by the added designations.
These prefixes indicate bearing components (rings, cages),
while suffixes indicate special aspects of the interior
construction, size tolerances, run accuracy, bearing clearance,
etc.
Prefixes
Prefixes are used very rarely. They normally mark single parts
of complete bearings.
Suffixes
Suffixes mark special models that deviate from the standard.
In particular, they include information about:
• interior design
• outer shape
• bearing clearance
• cage model
• lubricant
• tolerances
• seals
Selection of rolling bearings
The design engineer can select the best type of bearing based
on the characteristic properties of the various types of roller
bearings and the operating conditions of the arrangement of
the bearings. Here, the special or most important conditions
of each case for the bearings that could influence the
selection of the best bearing for the task are to be taken into
con sideration. Various types of bearings may be best for the
given operating conditions in many cases.
The effective outer forces and the demands for service life and
operating safety determine the size of the bearing needed.
Above all, the decisive factors for the selection of the type and
size of the bearing are the size, direction and type of loads
that will be exerted on the bearing and the operating speed.
Space limitations often require the selection of bearings with
small cross-sections or even multiple rows of bearings to
attain the necessary load-bearing capacity and service life.
If the bearings have to be very accurate, bearings with great
accuracy, especially ball bearings and cylinder roller bearings,
should be used as they are produced in the highest accuracy
classes.
The operating temperature of the bearings influences the
design of the arrangement of the bearings both from the
viewpoint of the selection of lubricant and the model of the
bearing when the operating temperature continually rises
above 100°C. The inner bearing clearance must be suited to
the operating conditions, which are mostly determined by the
temperature difference between the inner and outer ring, by
the effects of the heat fed to the bearing, or by the effect of
the high speed.
Furthermore, the selection of the bearing is also influenced by
the simplicity of the installation, demands on lubrication and
seals, and demands for low friction and low running noise.
A distinction is made for roller bearings between static and
dynamic loads.
Width row
Sample designation: 2 2 3 16 (Normally written 22316)
16 x 5 = 80 mm Bore
Diameter row 3
Width row 2
Swivel-joint roller bearing
Size row
Pe r fec t qua l i t y and dynamic
Diameter
row
Bore
Size row
2-4
Bearings and steel balls
Service life
The service life of a bearing is the number of revolutions or the
running number in operating hours that a bearing works at a
set speed before the first signs of material fatigue (peeling)
appear on the roller bodies or the running paths. There can,
however be great differences in the service life of the same
type and size of bearing under the same operating conditions.
For this reason, the term service life was clearly defined for a
calculation, and the nominal service life was used as the
basis with an eye to operating safety and to fulfill the ISO
recommendation. That means that this service life is met or
exceeded by 90% of a large number of the same bearings
under the same operating conditions.
We thus do not use the term service life to mean the time until
a bearing fails due only to the dynamic material fatigue of the
bearing rings or the roller bodies. Unforeseen failures due, for
instance, to improper installation, errors in the design of the
bearing, errors in maintenance, and the entrance of dirt and
moisture.
Load rating
• The static load rating C0 corresponds to the load under
which the entire remaining deformation of roller bodies and
running paths is maximally 0.0001 of the roller body’s
diameter. The calculation is based on surface pressure in
the center of the pressure field.
• The dynamic load rating C corresponds to the load under
which 90% of a large number of the same roller bearings
attain a nominal service life of 1 million revolutions before
they fail due to the fatigue of the roller surface. For radial
bearings, the dynamic load rating refers to the purely radial,
unchanging load and the rotating inner ring, while the purely
axial, unchanging load is used for axial bearings.
For each bearing, the dynamic load rating C is indicated in
the bearing tables. This number depends on the dimensions
of the bearing, the number of roller bodies, the material, and
the model of the bearing.
Note:
The showed load ratings are only valid if bearings are mounted
into housings or on shafts. Therefore the mounting place of
bearing has to be designed (fit, roundness of components) in
such way that a deformation of bearing can be prevent resp. a
appropriate stability (stiffness) of housing and shaft can be
reached.
Lubrication of rolling bearings
Rolling bearings must be lubricated for three reasons:
1. To prevent metallic contact between the roller bodies,
bearing rings, and cages.
2. To prevent corrosion.
3. To prevent wear.
Normally, roller bearings are lubricated with grease. During
installing, only 30-50% of the empty space where the bearing
is being installed should be filled with grease.
In the course of time, lubricants lose their lubrication. Used or
dirty lubricants therefore have to be renewed or replaced. For
this lubrication, only greases and oils suitable for bearings
may be used.
Sealed bearings are generally lubricated with high-perfor mance
lithium-saponified greases. These greases normally have a temperature range from -20°C to +110°C, withstanding operating
temperatures of +110°C for short times. Under constant operation above 70°C, these standard lithium-saponified greases
tend to be effective for shorter periods.
For sufficient values under constant use at higher
temperatures, use special greases.
Keep in mind, though, that the use limits of the contact seals
used is +110°C. For use above this limit, make sure that seals
made of heat-resistant materials can be used.
Non-marked bearings are generally dimensionally stable up to
a limit temperature of 120°C. Operating temperatures above
120°C require special heat treatment (stabilization) to prevent
inadmissible changes in the bearing dimensions due to crystallization. Such treated bearings are marked with special
marks.
As already mentioned, always make sure that the use limit of
the contact seals used in the standard is at +110°C. For use
above this limit, make sure that seals made of heat-resistant
materials can be used.
Regreasing intervals
The usable life of the grease is influenced by many factors.
The regreasing intervals in our table thus can only be seen as
very rough estimates.
Experience with comparable bearings or ones already
used is therefore very important as not all operating
conditions and influential factors that affect the service
life of a lubricant – and hence also the bearing – are
known or determinable in many cases.
Speed limit
The bearing load, the bearing clearance, the lubricant, and the
heat elimination and heat supply influence the speed limit. The
speed limit given in the tables apply for purely radial loads on
radial bearings and purely axial loads on axial bearings,
normal tolerance of the bearing clearance, no external heat,
no excessive operating temperatures, and low, absolutely
shock-free loads.
Lubrication interval
Operating Operating conditions
temperature
of the bearing clean dirty very dirty
in °C most dirty
50 3 years 6 months 3 months
70 1 year 2 months 1 month
100 3 months 2 weeks 1 week
110 6 weeks 1 weeks 3 days
2-5
Deep groove ball bearing single-row
(DIN 625 T1)
The deep groove bearing is the most commonly used roller
bearing due to its great versatility. It can withstand loads both
radially and axially.
Design characteristics
Seal with cover washer
Deep groove ball bearing with 1 or 2 cover washers (Z or 2Z
model) for shafts Ø 3 to 120 mm. Sealing effects for standard
applications, low friction, for high speeds, ready for installation, greased, low noise. These seals do not, however, replace
overpressure seals. The temperature range for
standard lubrication with lithium-saponified lubricant at
between -20° to +110°C. These greases withstand operating
temperatures of +110°C for short periods. Under constant
operation above 70°C, these greases tend to be effective for
shorter periods.
Seal with sealing washer
Deep groove ball bearings with 1 or 2 sealing washers (RS or
2RS models) for shafts Ø 6 to 80 mm. Sealing effect for standard applications. The seals do not, however, replace overpressure seals. The use limit of the contact seals used in the
standard is +110°C. Low noise, ready for installation, greased,
maintenance-free operation. The temperature range for standard lubrication with lithium-saponified lubricants is from 20°C to +110°C.
These greases withstand operating temperatures of +110°C
for short periods. Under constant operation above 70°C,
these greases tend to be effective for shorter periods.
Warning:
The deep groove ball bearings with cover washers and sealing
washers must not be washed off!
For both styles of sealing it may occur a small loss of grease
during running-in.
Cover washer
(gap between the cover washer and the inner ring)
washer
(low friction seal)
Pe r fec t qua l i t y and dynamic
axial
both
radial and
axial
radial
groove
ball
inner ring
groove
cage
outer ring
Bearings and steel balls
2-6
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
3 10 4 0.15 0.51 0.22 40000 48000 623 0.002
3 10 4 0.15 0.51 0.22 40000 623-Z 0.002
3 10 4 0.15 0.51 0.22 40000 623-ZZ 0.002
4 13 5 0.20 0.90 0.40 38000 45000 624 0.003
4 13 5 0.20 0.90 0.40 38000 624-Z 0.003
4 13 5 0.20 0.90 0.40 38000 624-ZZ 0.003
4 16 5 0.30 1.46 0.67 26000 43000 634 0.005
4 16 5 0.30 1.46 0.67 26000 634-Z 0.005
4 16 5 0.30 1.46 0.67 26000 634-ZZ 0.005
5 16 5 0.30 1.32 0.44 36000 43000 625 0.006
5 16 5 0.30 1.32 0.44 36000 625-Z 0.006
5 16 5 0.30 1.32 0.44 36000 625-ZZ 0.006
5 19 6 0.30 2.20 1.04 32000 38000 635 0.009
5 19 6 0.30 2.20 1.04 32000 635-Z 0.009
5 19 6 0.30 2.20 1.04 32000 635-ZZ 0.009
6 19 6 0.30 1.76 0.86 32000 38000 626 0.008
6 19 6 0.30 1.76 0.86 32000 626-Z 0.008
6 19 6 0.30 1.76 0.86 32000 626-ZZ 0.008
6 19 6 0.30 1.76 0.86 22000 626-RS 0.008
6 19 6 0.30 1.76 0.86 22000 626-2RS 0.008
7 19 6 0.30 1.76 0.86 36000 43000 607 0.009
7 19 6 0.30 1.76 0.86 36000 607-Z 0.009
7 19 6 0.30 1.76 0.86 36000 607-ZZ 0.009
7 19 6 0.30 1.76 0.86 32000 607-RS 0.009
7 19 6 0.30 1.76 0.86 32000 607-2RS 0.009
7 22 7 0.30 1.76 0.86 36000 43000 627 0.012
7 22 7 0.30 1.76 0.86 36000 627-Z 0.012
7 22 7 0.30 1.76 0.86 36000 627-ZZ 0.012
7 22 7 0.30 1.76 0.86 32000 627-RS 0.012
7 22 7 0.30 1.76 0.86 32000 627-2RS 0.012
8 22 7 0.30 2.60 1.32 30000 36000 608 0.013
8 22 7 0.30 2.60 1.32 30000 608-Z 0.013
8 22 7 0.30 2.60 1.32 30000 608-ZZ 0.013
8 22 7 0.30 2.60 1.32 19000 608-RS 0.013
8 22 7 0.30 2.60 1.32 19000 608-2RS 0.013
9 24 7 0.30 2.65 1.37 30000 36000 609 0.015
9 24 7 0.30 2.65 1.37 30000 609-Z 0.015
9 24 7 0.30 2.65 1.37 30000 609-ZZ 0.015
9 24 7 0.30 2.65 1.37 18000 609-RS 0.015
9 24 7 0.30 2.65 1.37 18000 609-2RS 0.015
9 26 8 0.60 3.55 1.86 28000 34000 629 0.020
9 26 8 0.60 3.55 1.86 28000 629-Z 0.020
9 26 8 0.60 3.55 1.86 28000 629-ZZ 0.020
9 26 8 0.60 3.55 1.86 19000 629-RS 0.020
9 26 8 0.60 3.55 1.86 19000 629-2RS 0.020
open
2-7
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
10 19 5 0.30 1.38 0.59 36000 43000 61800 0.005
10 19 5 0.30 1.38 0.59 36000 61800-ZZ 0.005
10 19 5 0.30 1.38 0.59 20000 61800-2RS 0.005
10 22 6 0.30 1.95 0.75 34000 40000 61900 0.010
10 22 6 0.30 1.95 0.75 34000 61900-ZZ 0.010
10 22 6 0.30 1.95 0.75 19000 61900-2RS 0.010
10 26 8 0.30 3.98 1.96 28000 34000 6000 0.020
10 26 8 0.30 3.98 1.96 28000 6000-Z 0.020
10 26 8 0.30 3.98 1.96 28000 6000-ZZ 0.020
10 26 8 0.30 3.98 1.96 17000 6000-RS 0.020
10 26 8 0.30 3.98 1.96 17000 6000-2RS 0.020
10 30 9 0.60 4.42 2.60 24000 30000 6200 0.032
10 30 9 0.60 4.42 2.60 24000 6200-Z 0.032
10 30 9 0.60 4.42 2.60 24000 6200-ZZ 0.032
10 30 9 0.60 4.42 2.60 17000 6200-RS 0.032
10 30 9 0.60 4.42 2.60 17000 6200-2RS 0.032
10 35 11 0.60 7.58 3.45 20000 25000 6300 0.057
10 35 11 0.60 7.58 3.45 20000 6300-Z 0.057
10 35 11 0.60 7.58 3.45 20000 6300-ZZ 0.057
10 35 11 0.60 7.58 3.45 15000 6300-RS 0.057
10 35 11 0.60 7.58 3.45 15000 6300-2RS 0.057
12 21 5 0.30 1.43 0.67 32000 38000 61801 0.006
12 21 5 0.30 1.43 0.67 32000 61801-ZZ 0.006
12 21 5 0.30 1.43 0.67 19000 61801-2RS 0.006
12 24 6 0.30 2.25 0.98 28000 34000 61901 0.011
12 24 6 0.30 2.25 0.98 28000 61901-ZZ 0.011
12 24 6 0.30 2.25 0.98 18000 61901-2RS 0.011
12 28 8 0.30 4.42 2.36 25500 32000 6001 0.022
12 28 8 0.30 4.42 2.36 25500 6001-Z 0.022
12 28 8 0.30 4.42 2.36 25500 6001-ZZ 0.022
12 28 8 0.30 4.42 2.36 17000 6001-RS 0.022
12 28 8 0.30 4.42 2.36 17000 6001-2RS 0.022
12 32 10 0.60 6.00 3.10 22000 28000 6201 0.040
12 32 10 0.60 6.00 3.10 22000 6201-Z 0.040
12 32 10 0.60 6.00 3.10 22000 6201-ZZ 0.040
12 32 10 0.60 6.00 3.10 15000 6201-RS 0.040
12 32 10 0.60 6.00 3.10 15000 6201-2RS 0.040
12 37 12 1.00 8.50 4.15 18500 23000 6301 0.065
12 37 12 1.00 8.50 4.15 18500 6301-Z 0.065
12 37 12 1.00 8.50 4.15 18500 6301-ZZ 0.065
12 37 12 1.00 8.50 4.01 13000 6301-RS 0.065
12 37 12 1.00 8.50 4.15 13000 6301-2RS 0.065
15 24 5 0.30 1.56 0.80 28000 34000 61802 0.007
15 24 5 0.30 1.56 0.80 28000 61802-ZZ 0.007
15 24 5 0.30 1.56 0.80 17000 61802-2RS 0.007
15 28 7 0.30 4.03 2.04 24000 30000 61902 0.016
15 28 7 0.30 4.03 2.04 24000 61902-ZZ 0.016
15 28 7 0.30 4.03 2.04 16000 61902-2RS 0.016
15 32 8 0.30 5.60 2.85 24000 30000 16002 0.027
open
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-8
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
15 32 9 0.30 4.82 2.85 22000 28000 6002 0.032
15 32 9 0.30 4.82 2.85 22000 6002-Z 0.032
15 32 9 0.30 4.82 2.85 22000 6002-ZZ 0.032
15 32 9 0.30 4.82 2.85 14000 6002-RS 0.032
15 32 9 0.30 4.82 2.85 14000 6002-2RS 0.032
15 35 11 0.60 6.70 3.75 19000 24000 6202 0.048
15 35 11 0.60 6.70 3.75 19000 6202-Z 0.048
15 35 11 0.60 6.70 3.75 19000 6202-ZZ 0.048
15 35 11 0.60 6.70 3.75 13000 6202-RS 0.048
15 35 11 0.60 6.70 3.75 13000 6202-2RS 0.048
15 42 13 1.00 9.88 5.40 15500 20000 6302 0.092
15 42 13 1.00 9.88 5.40 15500 6302-Z 0.092
15 42 13 1.00 9.88 5.40 15500 6302-ZZ 0.092
15 42 13 1.00 9.88 5.40 12000 6302-RS 0.092
15 42 13 1.00 9.88 5.40 12000 6302-2RS 0.092
17 26 5 0.30 1.68 0.93 24000 30000 61803 0.008
17 26 5 0.30 1.68 0.93 24000 61803-ZZ 0.008
17 26 5 0.30 1.68 0.93 16000 61803-2RS 0.008
17 30 7 0.30 4.36 2.32 22000 28000 61903 0.018
17 30 7 0.30 4.36 2.32 22000 61903-ZZ 0.018
17 30 7 0.30 4.36 2.32 14000 61903-2RS 0.018
17 35 8 0.30 6.00 3.25 22000 28000 16003 0.032
17 35 10 0.30 5.15 3.25 20000 25000 6003 0.042
17 35 10 0.30 5.15 3.25 20000 6003-Z 0.042
17 35 10 0.30 5.15 3.25 20000 6003-ZZ 0.042
17 35 10 0.30 5.15 3.25 13000 6003-RS 0.042
17 35 10 0.30 5.15 3.25 13000 6003-2RS 0.042
17 40 12 0.60 8.28 4.75 17000 21000 6203 0.069
17 40 12 0.60 8.28 4.75 17000 6203-Z 0.069
17 40 12 0.60 8.28 4.75 17000 6203-ZZ 0.069
17 40 12 0.60 8.28 4.75 12000 6203-RS 0.069
17 40 12 0.60 8.28 4.75 12000 6203-2RS 0.069
17 47 14 1.00 11.80 6.55 14000 17000 6303 0.121
17 47 14 1.00 11.80 6.55 14000 6303-Z 0.121
17 47 14 1.00 11.80 6.55 14000 6303-ZZ 0.121
17 47 14 1.00 11.80 6.55 11000 6303-RS 0.121
17 47 14 1.00 11.80 6.55 11000 6303-2RS 0.121
20 32 7 0.30 2.70 1.50 19000 24000 61804 0.018
20 32 7 0.30 2.70 1.50 19000 61804-ZZ 0.018
20 32 7 0.30 2.70 1.50 13000 61804-2RS 0.018
20 37 9 0.30 6.37 3.65 18000 22000 61904 0.038
20 37 9 0.30 6.37 3.65 18000 61904-ZZ 0.038
20 37 9 0.30 6.37 3.65 12000 61904-2RS 0.038
20 42 8 0.30 6.95 4.05 18000 22000 16004 0.049
20 42 12 0.60 8.09 5.00 16500 20000 6004 0.072
20 42 12 0.60 8.09 5.00 16500 6004-Z 0.072
20 42 12 0.60 8.09 5.00 16500 6004-ZZ 0.072
20 42 12 0.60 8.09 5.00 11000 6004-RS 0.072
20 42 12 0.60 8.09 5.00 11000 6004-2RS 0.072
open
2-9
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 oil oil
mm mm mm mm kN kN min-1 min-1 kg
20 47 14 1.00 11.10 6.55 14000 17000 6204 0.117
20 47 14 1.00 11.10 6.55 14000 6204-Z 0.117
20 47 14 1.00 11.10 6.55 14000 6204-ZZ 0.117
20 47 14 1.00 11.10 6.55 10000 6204-RS 0.117
20 47 14 1.00 11.10 6.55 10000 6204-2RS 0.117
20 52 15 1.10 13.90 7.80 12000 15000 6304 0.158
20 52 15 1.10 13.90 7.80 12000 6304-Z 0.158
20 52 15 1.10 13.90 7.80 12000 6304-ZZ 0.158
20 52 15 1.10 13.90 7.80 9000 6304-RS 0.158
20 52 15 1.10 13.90 7.80 9000 6304-2RS 0.158
25 37 7 0.30 4.36 2.60 17000 20000 61805 0.022
25 37 7 0.30 4.36 2.60 17000 61805-ZZ 0.022
25 37 7 0.30 4.36 2.60 11000 61805-2RS 0.022
25 42 9 0.30 6.63 4.00 16000 19000 61905 0.045
25 42 9 0.30 6.63 4.00 16000 61905-ZZ 0.045
25 42 9 0.30 6.63 4.00 10000 61905-2RS 0.045
25 47 8 0.30 7.20 4.65 16000 19000 16005 0.056
25 47 12 0.60 8.62 5.85 14500 18000 6005 0.086
25 47 12 0.60 8.62 5.85 14500 6005-Z 0.086
25 47 12 0.60 8.62 5.85 14500 6005-ZZ 0.086
25 47 12 0.60 8.62 5.85 9500 6005-RS 0.086
25 47 12 0.60 8.62 5.85 9500 6005-2RS 0.086
25 52 15 1.00 12.10 7.80 12000 14500 6205 0.142
25 52 15 1.00 12.10 7.80 12000 6205-Z 0.142
25 52 15 1.00 12.10 7.80 12000 6205-ZZ 0.142
25 52 15 1.00 12.10 7.80 8500 6205-RS 0.142
25 52 15 1.00 12.10 7.80 8500 6205-2RS 0.142
25 62 17 1.10 20.60 11.40 10000 12000 6305 0.248
25 62 17 1.10 20.60 11.40 10000 6305-Z 0.248
25 62 17 1.10 20.60 11.40 10000 6305-ZZ 0.248
25 62 17 1.10 20.60 11.40 7500 6305-RS 0.248
25 62 17 1.10 20.60 11.40 7500 6305-2RS 0.248
30 42 7 0.30 4.49 2.90 15000 18000 61806 0.027
30 42 7 0.30 4.49 2.90 15000 61806-ZZ 0.027
30 42 7 0.30 4.49 2.90 9500 61806-2RS 0.027
30 47 9 0.30 7.28 4.55 14000 17000 61906 0.051
30 47 9 0.30 7.28 4.55 14000 61906-ZZ 0.051
30 47 9 0.30 7.28 4.55 8500 61906-2RS 0.051
30 55 9 0.30 11.20 7.35 13000 16000 16006 0.084
30 55 13 1.00 11.30 8.00 12000 15000 6006 0.128
30 55 13 1.00 11.30 8.00 12000 6006-Z 0.128
30 55 13 1.00 11.30 8.00 12000 6006-ZZ 0.128
30 55 13 1.00 11.30 8.00 8000 6006-RS 0.128
30 55 13 1.00 11.30 8.00 8000 6006-2RS 0.128
30 62 16 1.00 16.80 11.20 10000 12500 6206 0.192
30 62 16 1.00 16.80 11.20 10000 6206-Z 0.192
30 62 16 1.00 16.80 11.20 10000 6206-ZZ 0.192
30 62 16 1.00 16.80 11.20 7500 6206-RS 0.192
30 62 16 1.00 16.80 11.20 7500 6206-2RS 0.192
open
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-10
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
30 72 19 1.10 24.40 16.30 8400 10000 6306 0.348
30 72 19 1.10 24.40 16.30 8400 6306-Z 0.348
30 72 19 1.10 24.40 16.30 8400 6306-ZZ 0.348
30 72 19 1.10 24.40 16.30 6300 6306-RS 0.348
30 72 19 1.10 24.40 16.30 6300 6306-2RS 0.348
35 47 7 0.30 4.75 3.20 13000 16000 61807 0.030
35 47 7 0.30 4.75 3.20 13000 61807-ZZ 0.030
35 47 7 0.30 4.75 3.20 8000 61807-2RS 0.030
35 55 10 0.60 9.56 6.20 11000 14000 61907 0.080
35 55 10 0.60 9.56 6.20 11000 61907-ZZ 0.080
35 55 10 0.60 9.56 6.20 7500 61907-2RS 0.080
35 62 9 0.30 12.20 8.80 11000 14000 16007 0.107
35 62 14 1.00 13.60 10.40 10500 13000 6007 0.167
35 62 14 1.00 13.60 10.40 10500 6007-Z 0.167
35 62 14 1.00 13.60 10.40 10500 6007-ZZ 0.167
35 62 14 1.00 13.60 10.40 7000 6007-RS 0.167
35 62 14 1.00 13.60 10.40 7000 6007-2RS 0.167
35 72 17 1.00 22.20 15.30 8800 11000 6207 0.315
35 72 17 1.00 22.20 15.30 8800 6207-Z 0.315
35 72 17 1.00 22.20 15.30 8800 6207-ZZ 0.315
35 72 17 1.00 22.20 15.30 6300 6207-RS 0.315
35 72 17 1.00 22.20 15.30 6300 6207-2RS 0.315
35 80 21 1.10 28.90 19.00 7300 9000 6307 0.503
35 80 21 1.10 28.90 19.00 7300 6307-Z 0.503
35 80 21 1.10 28.90 19.00 7300 6307-ZZ 0.503
35 80 21 1.10 28.90 19.00 5600 6307-RS 0.503
35 80 21 1.10 28.90 19.00 5600 6307-2RS 0.503
40 52 7 0.30 4.94 3.45 11000 14000 61808 0.034
40 52 7 0.30 4.94 3.45 11000 61808-ZZ 0.034
40 52 7 0.30 4.94 3.45 7500 61808-2RS 0.034
40 62 12 0.60 13.80 9.30 10000 13000 61908 0.120
40 62 12 0.60 13.80 9.30 10000 61908-ZZ 0.120
40 62 12 0.60 13.80 9.30 6700 61908-2RS 0.120
40 68 9 0.30 13.20 10.20 10000 13000 16008 0.126
40 68 15 1.00 14.30 11.50 9500 12000 6008 0.213
40 68 15 1.00 14.30 11.50 9500 6008-Z 0.213
40 68 15 1.00 14.30 11.50 9500 6008-ZZ 0.213
40 68 15 1.00 14.30 11.50 6300 6008-RS 0.213
40 68 15 1.00 14.30 11.50 6300 6008-2RS 0.213
40 80 18 1.10 25.10 18.00 7800 9500 6208 0.402
40 80 18 1.10 25.10 18.00 7800 6208-Z 0.402
40 80 18 1.10 25.10 18.00 7800 6208-ZZ 0.402
40 80 18 1.10 25.10 18.00 5600 6208-RS 0.402
40 80 18 1.10 25.10 18.00 5600 6208-2RS 0.402
40 90 23 1.50 35.30 25.00 6700 8000 6308 0.685
40 90 23 1.50 35.30 25.00 6700 6308-Z 0.685
40 90 23 1.50 35.30 25.00 6700 6308-ZZ 0.685
40 90 23 1.50 35.30 25.00 5000 6308-RS 0.685
40 90 23 1.50 35.30 25.00 5000 6308-2RS 0.685
open
2-11
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
45 58 7 0.30 6.05 4.30 9500 12000 61809 0.040
45 58 7 0.30 6.05 4.30 9500 61809-ZZ 0.040
45 58 7 0.30 6.05 4.30 6700 61809-2RS 0.040
45 68 12 0.60 10.10 6.70 9000 11000 61909 0.140
45 68 12 0.60 10.10 6.70 9000 61909-ZZ 0.140
45 68 12 0.60 10.10 6.70 6000 61909-2RS 0.140
45 75 10 0.60 15.60 12.20 9000 11000 16009 0.168
45 75 16 1.00 17.80 14.30 8500 10500 6009 0.263
45 75 16 1.00 17.80 14.30 8500 6009-Z 0.263
45 75 16 1.00 17.80 14.30 8500 6009-ZZ 0.263
45 75 16 1.00 17.80 14.30 5600 6009-RS 0.263
45 75 16 1.00 17.80 14.30 5600 6009-2RS 0.263
45 85 19 1.10 28.20 20.40 7300 8800 6209 0.446
45 85 19 1.10 28.20 20.40 7300 6209-Z 0.446
45 85 19 1.10 28.20 20.40 7300 6209-ZZ 0.446
45 85 19 1.10 28.20 20.40 5000 6209-RS 0.446
45 85 19 1.10 28.20 20.40 5000 6209-2RS 0.446
45 100 25 1.50 45.80 32.00 5900 7100 6309 0.914
45 100 25 1.50 45.80 32.00 5900 6309-Z 0.914
45 100 25 1.50 45.80 32.00 5900 6309-ZZ 0.914
45 100 25 1.50 45.80 32.00 4500 6309-RS 0.914
45 100 25 1.50 45.80 32.00 4500 6309-2RS 0.914
50 65 7 0.30 6.24 4.75 9000 11000 61810 0.052
50 65 7 0.30 6.24 4.75 9000 61810-ZZ 0.052
50 65 7 0.30 6.24 4.75 6000 61810-2RS 0.052
50 72 12 0.60 14.60 10.40 8500 10000 61910 0.140
50 72 12 0.60 14.60 10.40 8500 61910-ZZ 0.140
50 72 12 0.60 14.60 10.40 5600 61910-2RS 0.140
50 80 10 0.60 16.00 13.20 8500 10000 16010 0.180
50 80 16 1.00 18.50 15.60 8000 10000 6010 0.293
50 80 16 1.00 18.50 15.60 8000 6010-Z 0.293
50 80 16 1.00 18.50 15.60 8000 6010-ZZ 0.293
50 80 16 1.00 18.50 15.60 5000 6010-RS 0.293
50 80 16 1.00 18.50 15.60 5000 6010-2RS 0.293
50 90 20 1.10 30.10 23.90 6600 8300 6210 0.506
50 90 20 1.10 30.10 23.90 6600 6210-Z 0.506
50 90 20 1.10 30.10 23.90 6600 6210-ZZ 0.506
50 90 20 1.10 30.10 23.90 4800 6210-RS 0.506
50 90 20 1.10 30.10 23.90 4800 6210-2RS 0.506
50 110 27 2.00 53.60 38.00 5300 6500 6310 1.170
50 110 27 2.00 53.60 38.00 5300 6310-Z 1.170
50 110 27 2.00 53.60 38.00 5300 6310-ZZ 1.170
50 110 27 2.00 53.60 38.00 4000 6310-RS 1.170
50 110 27 2.00 53.60 38.00 4000 6310-2RS 1.170
55 90 11 0.60 19.30 16.30 7500 9000 16011 0.263
55 90 18 1.10 24.00 21.00 7200 9000 6011 0.462
55 90 18 1.10 24.00 21.00 7200 6011-Z 0.462
55 90 18 1.10 24.00 21.00 7200 6011-ZZ 0.462
55 90 18 1.10 24.00 21.00 4500 6011-RS 0.462
open
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-12
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
55 90 18 1.10 24.00 21.00 4500 6011-2RS 0.462
55 100 21 1.50 37.30 29.00 6100 7500 6211 0.667
55 100 21 1.50 37.30 29.00 6100 6211-Z 0.667
55 100 21 1.50 37.30 29.00 6100 6211-ZZ 0.667
55 100 21 1.50 37.30 29.00 4300 6211-RS 0.667
55 100 21 1.50 37.30 29.00 4300 6211-2RS 0.667
55 120 29 2.10 62.00 47.50 4800 6000 6311 1.500
55 120 29 2.10 62.00 47.50 4800 6311-Z 1.500
55 120 29 2.10 62.00 47.50 4800 6311-ZZ 1.500
55 120 29 2.10 62.00 47.50 3600 6311-RS 1.500
55 120 29 2.10 62.00 47.50 3600 6311-2RS 1.500
60 95 11 0.60 20.00 17.60 7000 8500 16012 0.279
60 95 18 1.10 24.90 22.80 6700 8000 6012 0.459
60 95 18 1.10 24.90 22.80 6700 6012-Z 0.459
60 95 18 1.10 24.90 22.80 6700 6012-ZZ 0.459
60 95 18 1.10 24.90 22.80 4300 6012-RS 0.459
60 95 18 1.10 24.90 22.80 4300 6012-2RS 0.459
60 110 22 1.50 45.10 36.00 5400 6700 6212 0.852
60 110 22 1.50 45.10 36.00 5400 6212-Z 0.852
60 110 22 1.50 45.10 36.00 5400 6212-ZZ 0.852
60 110 22 1.50 45.10 36.00 4000 6212-RS 0.852
60 110 22 1.50 45.10 36.00 4000 6212-2RS 0.852
60 130 31 2.10 70.90 52.00 4500 5500 6312 1.880
60 130 31 2.10 70.90 52.00 4500 6312-Z 1.880
60 130 31 2.10 70.90 52.00 4500 6312-ZZ 1.880
60 130 31 2.10 70.90 52.00 3400 6312-RS 1.880
60 130 31 2.10 70.90 52.00 3400 6312-2RS 1.880
65 100 11 0.60 21.20 19.60 6700 8000 16013 0.298
65 100 18 1.10 26.60 24.00 6300 7500 6013 0.435
65 100 18 1.10 26.60 24.00 6300 6013-ZZ 0.436
65 100 18 1.10 26.60 24.00 4000 6013-2RS 0.436
65 120 23 1.50 49.10 41.30 5000 6200 6213 1.080
65 120 23 1.50 49.10 41.30 5000 6213-ZZ 1.080
65 120 23 1.50 49.10 41.30 3600 6213-2RS 1.080
65 140 33 2.10 80.30 60.00 4200 5000 6313 2.320
65 140 33 2.10 80.30 60.00 4200 6313-ZZ 2.320
65 140 33 2.10 80.30 60.00 3000 6313-2RS 2.320
70 110 13 0.60 28.00 25.00 6000 7000 16014 0.434
70 110 20 1.10 32.20 30.30 5700 6800 6014 0.675
70 110 20 1.10 32.20 30.30 5700 6014-ZZ 0.675
70 110 20 1.10 32.20 30.30 3600 6014-2RS 0.675
70 125 24 1.50 53.40 44.00 4700 5800 6214 1.170
70 125 24 1.50 53.40 44.00 4700 6214-ZZ 1.170
70 125 24 1.50 53.40 44.00 3400 6214-2RS 1.170
70 150 35 2.10 90.20 68.00 3800 4500 6314 1.820
70 150 35 2.10 90.20 68.00 3800 6314-ZZ 1.820
70 150 35 2.10 90.20 68.00 2800 6314-2RS 1.820
open
2-13
Deep groove ball bearings
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
75 115 13 0.60 28.50 27.00 5600 6700 16015 0.456
75 115 20 1.10 33.30 32.60 5400 6500 6015 0.720
75 115 20 1.10 33.30 32.60 5400 6015-ZZ 0.720
75 115 20 1.10 33.30 32.60 3400 6015-2RS 0.720
75 130 25 1.50 56.60 49.00 4400 5400 6215 1.300
75 130 25 1.50 56.60 49.00 4400 6215-ZZ 1.300
75 130 25 1.50 56.60 49.00 4000 6215-2RS 1.300
75 160 37 2.10 98.30 76.50 3600 4200 6315 3.390
75 160 37 2.10 98.30 76.50 3600 6315-ZZ 3.390
75 160 37 2.10 983.00 76.50 3600 6315-2RS 0.390
80 125 14 0.60 32.00 31.00 5300 6300 16016 0.615
80 125 22 1.10 40.30 39.00 5000 6000 6016 0.850
80 125 22 1.10 40.30 39.00 5000 6016-ZZ 0.850
80 125 22 1.10 40.30 39.00 5000 6016-2RS 0.850
80 140 26 2.00 62.20 53.00 4200 5200 6216 1.420
80 140 26 2.00 62.20 53.00 4200 6216-ZZ 1.420
80 140 26 2.00 62.20 53.00 3000 6216-2RS 1.420
80 170 39 2.10 106.00 86.50 3400 4000 6316 3.730
80 170 39 2.10 106.00 86.50 3400 6316-ZZ 3.730
80 170 39 2.10 106.00 86.50 2600 6316-2RS 3.730
85 130 14 0.60 34.20 33.50 5000 6000 16017 0.641
85 130 22 1.10 41.80 41.90 4800 5600 6017 0.895
85 130 22 1.10 41.80 41.90 4800 6017-ZZ 0.895
85 150 28 2.00 71.20 64.00 3900 4800 6217 1.820
85 150 28 2.00 71.20 64.00 3900 6217-ZZ 1.820
85 180 41 3.00 115.00 88.00 3200 3800 6317 4.240
85 180 41 3.00 115.00 88.00 3200 6317-ZZ 4.240
90 140 16 1.00 41.50 39.00 4500 5300 16018 0.859
90 140 24 1.50 49.20 48.70 4500 5300 6018 1.180
90 140 24 1.50 49.20 48.70 4500 6018-ZZ 1.180
90 160 30 2.00 82.30 72.00 3700 4500 6218 2.200
90 160 30 2.00 82.30 72.00 3700 6218-ZZ 2.200
90 190 43 3.00 123.00 102.00 3000 3600 6318 5.270
90 190 43 3.00 123.00 102.00 3000 6318-ZZ 5.270
95 145 16 1.00 40.00 40.50 4500 5300 16019 0.905
95 145 24 1.50 51.10 52.30 4300 5000 6019 1.210
95 145 24 1.50 51.10 52.30 4300 6019-ZZ 1.210
95 170 32 2.10 93.30 81.50 3500 4300 6219 2.670
95 170 32 2.10 93.30 81.50 3500 6219-ZZ 2.670
95 200 45 3.00 132.00 112.00 2800 3400 6319 6.140
95 200 45 3.00 132.00 112.00 2800 6319-ZZ 6.140
100 150 16 1.00 44.00 44.00 4300 5000 16020 0.929
100 150 24 1.50 50.60 52.50 4000 4800 6020 1.260
100 150 24 1.50 50.60 52.50 4000 6020-ZZ 1.260
100 180 34 2.10 105.00 93.00 3300 4000 6220 3.220
100 180 34 2.10 105.00 93.00 3300 6220-ZZ 3.220
open
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-14
Deep groove ball bearings
Further sizes are available on request.
Dimensions Load ratings Limiting speed Bearing no. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
100 215 47 3.00 150.00 134.00 2600 3200 6320 7.560
100 215 47 3.00 150.00 134.00 2600 6320-ZZ 7.560
105 160 18 1.00 54.00 54.00 4000 4800 16021 1.220
105 160 26 2.00 61.10 63.90 3900 4700 6021 1.580
105 160 26 2.00 61.10 63.90 3900 6021-ZZ 1.580
110 170 19 1.00 57.00 57.00 3800 4500 16022 1.490
110 170 28 2.00 69.30 71.00 3600 5300 6022 1.970
110 170 28 2.00 69.30 71.00 3600 6022-ZZ 1.970
110 200 38 2.10 124.00 116.00 3000 3600 6222 4.570
110 200 38 2.10 124.00 116.00 3000 6222-ZZ 4.570
110 240 50 3.00 178.00 166.00 2600 3200 6322 10.300
110 240 50 3.00 178.00 166.00 2600 6322-ZZ 10.300
120 180 19 1.00 61.00 64.00 3400 4800 16024 1.600
120 180 28 2.00 71.50 76.90 3400 4000 6024 2.110
120 180 28 2.00 71.50 76.90 3400 6024-ZZ 2.110
120 215 40 2.10 133.00 122.00 2800 3400 6224 5.600
120 215 40 2.10 133.00 122.00 2800 6224-ZZ 5.600
120 260 50 3.00 178.00 190.00 2400 3000 6324 12.800
120 260 50 3.00 178.00 190.00 2400 6324-ZZ 12.800
open
2-15
Deep groove ball bearings stainless steel
*) on request
* ***
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
10 26 8 0.3 3.20 1.80 25000 30000 SS 6000 0.020
10 26 8 0.3 3.20 1.80 25000 SS 6000-Z 0.020
10 26 8 0.3 3.20 1.80 25000 SS 6000-ZZ 0.020
10 26 8 0.3 3.20 1.80 15000 SS 6000-RS 0.020
10 26 8 0.3 3.20 1.80 15000 SS 6000-2RS 0.020
10 30 9 0.6 3.50 2.10 23000 36435 SS 6200 0.032
10 30 9 0.6 3.50 2.10 23000 SS 6200-Z 0.032
10 30 9 0.6 3.50 2.10 23000 SS 6200-ZZ 0.032
10 30 9 0.6 3.50 2.10 15000 SS 6200-RS 0.032
10 30 9 0.6 3.50 2.10 15000 SS 6200-2RS 0.032
12 28 8 0.3 3.50 2.10 23000 28800 SS 6001 0.022
12 28 8 0.3 3.50 2.10 23000 SS 6001-Z 0.022
12 28 8 0.3 3.50 2.10 23000 SS 6001-ZZ 0.022
12 28 8 0.3 3.50 2.10 15000 SS 6001-RS 0.022
12 28 8 0.3 3.50 2.10 15000 SS 6001-2RS 0.022
12 32 10 0.6 4.80 2.80 21600 27000 SS 6201 0.040
12 32 10 0.6 4.80 2.80 21600 SS 6201-Z 0.040
12 32 10 0.6 4.80 2.80 21600 SS 6201-ZZ 0.040
12 32 10 0.6 4.80 2.80 14400 SS 6201-RS 0.040
12 32 10 0.6 4.80 2.80 14400 SS 6201-2RS 0.040
15 32 9 0.3 3.82 2.40 21600 27000 SS 6002 0.032
15 32 9 0.3 3.82 2.40 21600 SS 6002-Z 0.032
15 32 9 0.3 3.82 2.40 21600 SS 6002-ZZ 0.032
15 32 9 0.3 3.82 2.40 13500 SS 6002-RS 0.032
15 32 9 0.3 3.82 2.40 13500 SS 6002-2RS 0.032
15 35 11 0.6 5.36 3.30 18000 23400 SS 6202 0.048
15 35 11 0.6 5.36 3.30 18000 SS 6202-Z 0.048
15 35 11 0.6 5.36 3.30 18000 SS 6202-ZZ 0.048
15 35 11 0.6 5.36 3.30 12600 SS 6202-RS 0.048
15 35 11 0.6 5.36 3.30 12600 SS 6202-2RS 0.048
17 35 10 0.3 4.12 2.70 19800 25200 SS 6003 0.042
17 35 10 0.3 4.12 2.70 19800 SS 6003-Z 0.042
17 35 10 0.3 4.12 2.70 19800 SS 6003-ZZ 0.042
17 35 10 0.3 4.12 2.70 11700 SS 6003-RS 0.042
17 35 10 0.3 4.12 2.70 11700 SS 6003-2RS 0.042
17 40 12 0.6 6.60 4.22 16200 19800 SS 6203 0.069
17 40 12 0.6 6.60 4.22 16200 SS 6203-Z 0.069
17 40 12 0.6 6.60 4.22 16200 SS 6203-ZZ 0.069
17 40 12 0.6 6.60 4.22 10800 SS 6203-RS 0.069
17 40 12 0.6 6.60 4.22 10800 SS 6203-2RS 0.069
20 42 12 0.6 6.50 4.25 15300 18000 SS 6004 0.072
20 42 12 0.6 6.50 4.25 15300 SS 6004-Z 0.072
20 42 12 0.6 6.50 4.25 15300 SS 6004-ZZ 0.072
20 42 12 0.6 6.50 4.25 9900 SS 6004-RS 0.072
20 42 12 0.6 6.50 4.25 9900 SS 6004-2RS 0.072
open
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-16
Deep groove ball bearings stainless steel
*) on request
Further sizes are available on request.
* ***
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B r min. dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
20 47 14 1.0 8.90 5.78 13500 16200 SS 6204 0.117
20 47 14 1.0 8.90 5.78 13500 SS 6204-Z 0.117
20 47 14 1.0 8.90 5.78 13500 SS 6204-ZZ 0.117
20 47 14 1.0 8.90 5.78 9000 SS 6204-RS 0.117
20 47 14 1.0 8.90 5.78 9000 SS 6204-2RS 0.117
25 47 12 0.6 6.90 4.80 13500 16200 SS 6005 0.086
25 47 12 0.6 6.90 4.80 13500 SS 6005-Z 0.086
25 47 12 0.6 6.90 4.80 13500 SS 6005-ZZ 0.086
25 47 12 0.6 6.90 4.80 8550 SS 6005-RS 0.086
25 47 12 0.6 6.90 4.80 8550 SS 6005-2RS 0.086
25 52 15 1.0 9.68 6.64 12600 15300 SS 6205 0.142
25 52 15 1.0 9.68 6.64 12600 SS 6205-Z 0.142
25 52 15 1.0 9.68 6.64 12600 SS 6205-ZZ 0.142
25 52 15 1.0 9.68 6.64 8100 SS 6205-RS 0.142
25 52 15 1.0 9.68 6.64 8100 SS 6205-2RS 0.142
30 55 13 1.0 9.04 6.72 11700 14400 SS 6006 0.128
30 55 13 1.0 9.04 6.72 11700 SS 6006-Z 0.128
30 55 13 1.0 9.04 6.72 11700 SS 6006-ZZ 0.128
30 55 13 1.0 9.04 6.72 9900 SS 6006-RS 0.128
30 55 13 1.0 9.04 6.72 9900 SS 6006-2RS 0.128
30 62 16 1.0 13.44 9.52 9900 12600 SS 6206 0.215
30 62 16 1.0 13.44 9.52 9900 SS 6206-Z 0.215
30 62 16 1.0 13.44 9.52 9900 SS 6206-ZZ 0.215
30 62 16 1.0 13.44 9.52 7500 SS 6206-RS 0.215
30 62 16 1.0 13.44 9.52 7500 SS 6206-2RS 0.215
35 62 14 1.0 10.88 8.32 9900 12600 SS 6007 0.167
35 62 14 1.0 10.88 8.32 9900 SS 6007-Z 0.167
35 62 14 1.0 10.88 8.32 9900 SS 6007-ZZ 0.167
35 62 14 1.0 10.88 8.32 6300 SS 6007-RS 0.167
35 62 14 1.0 10.88 8.32 6300 SS 6007-2RS 0.167
35 72 17 1.0 17.76 12.96 8550 10800 SS 6207 0.315
35 72 17 1.0 17.76 12.96 8550 SS 6207-Z 0.315
35 72 17 1.0 17.76 12.96 8550 SS 6207-ZZ 0.315
35 72 17 1.0 17.76 12.96 5670 SS 6207-RS 0.315
35 72 17 1.0 17.76 12.96 5670 SS 6207-2RS 0.315
Materialien
Inner ring: made of stainless steel material, hardened
Outer ring: made of stainless steel material, hardened
Roller body: made of stainless steel material, hardened
Cover washers: made of stainless steel material
Sealing washers: synthetic material
open
2-17
Angular ball bearings, single-row (DIN 628 T1)
Pressure angle alpha = 40°
B.TVP = Solid window-type cage of glass fibre intensified
polyamide
B.TVP.UA = Solid window-type cage of glass fibre intensified
polyamide, universal version for pairwise mounting, with
thrust clearance (for pairwise mounting note lower
limiting speed)
B.TVP.UO = Solid window-type cage of glass fibre intensified
polyamide, unsiversal version for pairwise mounting,
without clearance (for pairwise mounting note lower
limiting speed)
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B r r1 a dynamic C static C0 grease oil
mm mm mm mm mm mm kN kN min-1 min-1 kg
17 40 12 0.6 0.6 18.0 10.00 5.50 15000 20000 7203- B.TVP 0.067
17 40 12 0.6 0.6 18.0 10.00 5.50 15000 20000 7203- B.TVP.U0 0.067
17 47 14 1.0 0.6 20.0 16.00 8.30 13000 18000 7303- B.TVP 0.113
20 47 14 1.0 0.6 21.0 13.40 7.65 13000 18000 7204- B.TVP 0.107
20 47 14 1.0 0.6 21.0 13.40 7.65 13000 18000 7204- B.TVP.U0 0.107
20 47 14 1.0 0.6 21.0 13.40 7.65 13000 18000 7204- B.TVP.UA 0.107
20 52 15 1.1 0.6 23.0 19.00 10.40 12000 17000 7304- B.TVP 0.146
20 52 15 1.1 0.6 23.0 19.00 10.40 12000 17000 7304- B.TVP.U0 0.146
20 52 15 1.1 0.6 23.0 19.00 10.40 12000 17000 7304- B.TVP.UA 0.146
25 52 15 1.0 0.6 24.0 14.60 9.30 11000 16000 7205- B.TVP 0.131
25 52 15 1.0 0.6 24.0 14.60 9.30 11000 16000 7205- B.TVP.U0 0.131
25 52 15 1.0 0.6 24.0 14.60 9.30 11000 16000 7205- B.TVP.UA 0.131
25 62 17 1.1 0.6 27.0 26.00 15.00 9500 14000 7305- B.TVP 0.229
25 62 17 1.1 0.6 27.0 26.00 15.00 9500 14000 7305- B.TVP.U0 0.229
25 62 17 1.1 0.6 27.0 26.00 15.00 9500 14000 7305- B.TVP.UA 0.229
30 62 16 1.0 0.6 27.0 20.40 13.40 9000 13000 7206- B.TVP 0.201
30 62 16 1.0 0.6 27.0 20.40 13.40 9000 13000 7206- B.TVP.U0 0.201
30 62 16 1.0 0.6 27.0 20.40 13.40 9000 13000 7206- B.TVP.UA 0.201
30 72 19 1.1 0.6 31.0 32.50 20.00 8000 11000 7306- B.TVP 0.349
30 72 19 1.1 0.6 31.0 32.50 20.00 8000 11000 7306- B.TVP.U0 0.349
30 72 19 1.1 0.6 31.0 32.50 20.00 8000 11000 7306- B.TVP.UA 0.349
35 72 17 1.1 0.6 31.0 27.00 18.30 8000 11000 7207- B.TVP 0.287
35 72 17 1.1 0.6 31.0 27.00 18.30 8000 11000 7207- B.TVP.U0 0.287
35 72 17 1.1 0.6 31.0 27.00 18.30 8000 11000 7207- B.TVP.UA 0.287
35 80 21 1.5 1.0 35.0 39.00 25.00 7000 9500 7307- B.TVP 0.456
35 80 21 1.5 1.0 35.0 39.00 25.00 7000 9500 7307- B.TVP.U0 0.456
35 80 21 1.5 1.0 35.0 39.00 25.00 7000 9500 7307- B.TVP.UA 0.456
40 80 18 1.1 0.6 34.0 32.00 23,20 7000 9500 7208- B.TVP 0.373
40 80 18 1.1 0.6 34.0 32.00 23,20 7000 9500 7208- B.TVP.U0 0.373
40 80 18 1.1 0.6 34.0 32.00 23,20 7000 9500 7208- B.TVP.UA 0.373
40 90 23 1.5 1.0 39.0 50.00 32.50 6300 8500 7308- B.TVP 0.626
40 90 23 1.5 1.0 39.0 50.00 32.50 6300 8500 7308- B.TVP.U0 0.626
40 90 23 1.5 1.0 39.0 50.00 32.50 6300 8500 7308- B.TVP.UA 0.626
45 85 19 1.1 0.6 37.0 36.00 26.50 6300 8500 7209- B.TVP 0.414
45 85 19 1.1 0.6 37.0 36.00 26.50 6300 8500 7209- B.TVP.U0 0.414
45 85 19 1.1 0.6 37.0 36.00 26.50 6300 8500 7209- B.TVP.UA 0.414
45 100 25 1.5 1.0 43.0 60.00 40.00 5600 7500 7309- B.TVP 0.835
45 100 25 1.5 1.0 43.0 60.00 40.00 5600 7500 7309- B.TVP.U0 0.835
45 100 25 1.5 1.0 43.0 60.00 40.00 5600 7500 7309- B.TVP.UA 0.835
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-18
Angular ball bearings, single-row
Pressure angle alpha = 40°
B.TVP = Solid window-type cage of glass fibre intensified
polyamide
B.TVP.UA = Solid window-type cage of glass fibre intensified
polyamide, universal version for pairwise mounting, with
thrust clearance (for pairwise mounting note lower
limiting speed)
B.TVP.UO = Solid window-type cage of glass fibre intensified polyamide, unsiversal version for pairwise mounting, without
clearance (for pairwise mounting note lower
limiting speed)
50 90 20 1.1 0.6 39.0 37.50 28.50 6000 8000 7210- B.TVP 0.466
50 90 20 1.1 0.6 39.0 37.50 28.50 6000 8000 7210- B.TVP.U0 0.466
50 90 20 1.1 0.6 39.0 37.50 28.50 6000 8000 7210- B.TVP.UA 0.466
50 110 27 2.0 1.0 47.0 69.50 47.50 5300 7000 7310- B.TVP 1.080
50 110 27 2.0 1.0 47.0 69.50 47.50 5300 7000 7310- B.TVP.U0 1.080
50 110 27 2.0 1.0 47.0 69.50 47.50 5300 7000 7310- B.TVP.UA 1.080
55 100 21 1.5 1.0 43.0 46.50 36.00 5300 7000 7211- B.TVP 0.633
55 100 21 1.5 1.0 43.0 46.50 36.00 5300 7000 7211- B.TVP.U0 0.633
55 100 21 1.5 1.0 43.0 46.50 36.00 5300 7000 7211- B.TVP.UA 0.633
55 120 29 2.0 1.0 51.0 78.00 56.00 4800 6300 7311- B.TVP 1.141
55 120 29 2.0 1.0 51.0 78.00 56.00 4800 6300 7311- B.TVP.U0 1.141
55 120 29 2.0 1.0 51.0 78.00 56.00 4800 6300 7311- B.TVP.UA 1.141
60 110 22 1.5 1.0 47.0 56.00 44.00 4800 6300 7212- B.TVP 0.798
60 110 22 1.5 1.0 47.0 56.00 44.00 4800 6300 7212- B.TVP.U0 0.798
60 110 22 1.5 1.0 47.0 56.00 44.00 4800 6300 7212- B.TVP.UA 0.798
60 130 31 2.1 1.1 55.0 90.00 65.50 4300 5600 7312- B.TVP 1.181
60 130 31 2.1 1.1 55.0 90.00 65.50 4300 5600 7312- B.TVP.U0 1.181
60 130 31 2.1 1.1 55.0 90.00 65.50 4300 5600 7312- B.TVP.UA 1.181
65 120 23 1.5 1.0 50.5 64.00 53.00 4500 6000 7213- B.TVP 1.030
65 120 23 1.5 1.0 50.5 64.00 53.00 4500 6000 7213- B.TVP.U0 1.030
65 120 23 1.5 1.0 50.5 64.00 53.00 4500 6000 7213- B.TVP.UA 1.030
65 140 33 2.1 1.1 60.0 102.00 75.00 4000 5300 7313- B.TVP 2.160
65 140 33 2.1 1.1 60.0 102.00 75.00 4000 5300 7313- B.TVP.U0 2.160
65 140 33 2.1 1.1 60.0 102.00 75.00 4000 5300 7313- B.TVP.UA 2.160
70 125 24 1.5 1.0 53.0 69.50 58.50 4300 5600 7214- B.TVP 1.140
70 125 24 1.5 1.0 53.0 69.50 58.50 4300 5600 7214- B.TVP.U0 1.140
70 125 24 1.5 1.0 53.0 69.50 58.50 4300 5600 7214- B.TVP.UA 1.140
70 150 35 2.1 1.1 64.0 114.00 86.50 3800 5000 7314- B.TVP 2.650
70 150 35 2.1 1.1 64.0 114.00 86.50 3800 5000 7314- B.TVP.U0 2.650
70 150 35 2.1 1.1 64.0 114.00 86.50 3800 5000 7314- B.TVP.UA 2.650
Further sizes are available on request.
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B r r1 a dynamic C static C0 grease oil
mm mm mm mm mm mm kN kN min-1 min-1 kg
2-19
Spindle bearings, single-row
C. = Pressure angle alpha = 15°
E. = Pressure angle alpha = 25°
TPA.P4.UL = Solid window-type cage of textile laminated phenolic,
tolerance class P4, universal version for pairwise
mounting
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B a dynamic C static C0 grease oil
mm mm mm mm kN kN min-1 min-1 kg
Further sizes are available on request.
17 35 10 8 8.65 4.90 43000 63000 B7003-C.TPA.P4.UL 0.040
17 35 10 11 8.30 4.75 38000 56000 B7003-E.TPA.P4.UL 0.040
17 40 12 10 10.80 5.85 38000 56000 B7203-C.TPA.P4.UL 0.060
17 40 12 13 10.40 5.60 36000 53000 B7203-E.TPA.P4.UL 0.060
20 42 12 10 10.00 6.00 30000 40000 B7004-C.TPA.P4.UL 0.690
20 42 12 13 9.50 5.70 26000 36000 B7004-E.TPA.P4.UL 0.690
20 47 14 12 12.90 7.50 28000 38000 B7204- C.TPA.P4.UL 0.690
20 47 14 15 12.50 7.20 24000 34000 B7204- E.TPA.P4.UL 0.108
25 47 12 11 11.00 7.20 26000 36000 B7005- C.TPA.P4.UL 0.108
25 47 12 14 10.60 6.95 24000 34000 B7005- E.TPA.P4.UL 0.084
25 52 15 13 14.60 9.30 24000 34000 B7205- C.TPA.P4.UL 0.084
25 52 15 17 13.70 8.80 22000 32000 B7205- E.TPA.P4.UL 0.133
30 55 13 16 14.30 10.00 22000 32000 B7006- C.TPA.P4.UL 0.133
30 55 13 14 13.40 9.50 20000 30000 B7006- E.TPA.P4.UL 0.117
30 62 16 14 20.80 13.70 20000 30000 B7206- C.TPA.P4.UL 0.204
30 62 16 19 20.00 13.20 18000 26000 B7206- E.TPA.P4.UL 0.204
35 62 14 14 16.30 12.20 19000 28000 B7007- C.TPA.P4.UL 0.157
35 62 14 18 15.60 11.40 17000 24000 B7007- E.TPA.P4.UL 0.157
35 72 17 16 25.50 18.00 18000 26000 B7207- C.TPA.P4.UL 0.296
35 72 17 21 24.50 17.00 16000 26000 B7207- E.TPA.P4.UL 0.296
40 68 15 15 17.30 14.00 18000 26000 B7008- C.TPA.P4.UL 0.196
40 68 15 20 16.60 13.20 15000 20000 B7008- E.TPA.P4.UL 0.196
40 80 18 17 34.50 23.20 16000 22000 B7208- C.TPA.P4.UL 0.364
40 80 18 23 32.50 22.40 14000 19000 B7208- E.TPA.P4.UL 0.364
45 75 16 16 23.20 18.30 16000 22000 B7009- C.TPA.P4.UL 0.236
45 75 16 22 22.00 17.30 14000 19000 B7009- E.TPA.P4.UL 0.236
45 85 19 18 40.50 29.00 15000 20000 B7209- C.TPA.P4.UL 0.408
45 85 19 25 39.00 27.50 13000 18000 B7209- E.TPA.P4.UL 0.408
50 80 16 17 24.50 20.80 15000 20000 B7010- C.TPA.P4.UL 0.262
50 80 16 23 23.20 20.00 13000 18000 B7010- E.TPA.P4.UL 0.262
50 90 20 19 45.00 32.50 14000 19000 B7210- C.TPA.P4.UL 0.459
50 90 20 26 42.50 31.50 12000 17000 B7210- E.TPA.P4.UL 0.459
55 90 18 19 34.00 28.50 13000 18000 B7011- C.TPA.P4.UL 0.383
55 90 18 26 32.50 27.00 11000 16000 B7011- E.TPA.P4.UL 0.383
55 100 21 21 53.00 40.00 12000 17000 B7211- C.TPA.P4.UL 0.608
55 100 21 29 50.00 38.00 11000 16000 B7211- E.TPA.P4.UL 0.608
60 95 18 19 35.50 30.50 12000 17000 B7012- C.TPA.P4.UL 0.410
60 95 18 27 33.50 29.00 11000 16000 B7012- E.TPA.P4.UL 0.410
60 110 22 23 64.00 49.00 11000 16000 B7212- C.TPA.P4.UL 0.782
60 110 22 31 61.00 47.50 9500 14000 B7212- E.TPA.P4.UL 0.782
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-20
Self aligning ball bearings (DIN 630)
Dimensions Load ratings · Faktor Limiting speed Bearing No. Weight
d D B r min. dynamic
C
static
C0
grease oil
mm mm mm mm kN e y1 y2 kN y0 min-1 min-1 kg
10 30 9 0.6 5.50 0.32 2.0 3.00 1.20 2.1 24000 30000 1200 0.034
10 30 14 0.6 8.30 0.58 1.1 1.70 1.73 1.1 22000 28000 2200 0.045
10 30 14 0.6 5.50 0.32 2.0 3.00 1.20 2.1 18000 2200-2RS 0.045
10 35 11 0.6 7.20 0.34 1.8 2.90 1.60 1.9 20000 26000 1300 0.062
12 32 10 0.6 5.60 0.37 1.7 2.60 1.27 1.8 24000 30000 1201 0.041
12 32 14 0.6 9.00 0.53 1.2 1.85 1.96 1.3 20000 26000 2201 0.050
12 32 14 0.6 5.60 0.37 1.7 2.60 1.27 1.8 17000 2201-2RS 0.057
12 37 12 1.0 9.36 0.35 1.8 2.80 2.16 1.9 18000 22000 1301 0.073
15 35 11 0.6 7.41 0.34 1.9 2.90 1.76 2.0 20000 26000 1202 0.049
15 35 14 0.6 9.15 0.46 1.4 2.10 2.08 1.5 19000 24000 2202 0.057
15 35 14 0.6 7.50 0.34 1.9 2.90 1.76 2.0 15000 2202-2RS 0.060
15 42 13 1.0 9.50 0.35 1.8 2.80 2.28 1.9 17000 20000 1302 0.100
17 40 12 0.6 8.00 0.33 1.9 3.00 2.04 2.0 18000 22000 1203 0.074
17 40 16 0.6 11.40 0.46 1.4 2.10 2.75 1.4 16000 19000 2203 0.086
17 40 16 0.6 8.00 0.33 1.9 3.00 2.04 2.0 14000 2203-2RS 0.096
17 47 14 1.0 12.50 0.32 1.9 3.00 3.20 2.0 15000 18000 1303 0.136
20 47 14 1.0 10.00 0.28 2.2 3.50 2.65 2.3 15000 18000 1204 0.117
20 47 18 1.0 14.30 0.44 1.5 2.20 3.55 1.5 14000 17000 2204 0.136
20 47 18 1.0 10.00 0.28 2.2 3.50 2.65 2.3 11000 2204-2RS 0.148
20 52 15 1.1 12.50 0.29 2.2 3.30 3.35 2.3 13000 16000 1304 0.172
25 52 15 1.0 12.20 0.27 2.4 3.70 3.35 2.5 13000 16000 1205 0.137
25 52 18 1.0 17.00 0.35 1.8 2.80 4.40 1.9 12000 15000 2205 0.159
25 52 18 1.0 12.20 0.27 2.4 3.70 3.35 2.5 9500 2205-2RS 0.162
25 62 17 1.1 18.00 0.28 2.3 3.50 5.00 2.4 11000 14000 1305 0.275
30 62 16 1.0 15.60 0.25 2.5 3.90 4.65 2.7 11000 14000 1206 0.220
30 62 20 1.0 25.50 0.30 2.1 3.30 6.95 2.2 9500 12000 2206 0.259
30 62 20 1.0 15.60 0.25 2.5 3.90 4.65 2.7 8000 2206-2RS 0.268
30 72 19 1.1 21.20 0.26 2.4 3.70 6.30 2.5 9000 11000 1306 0.408
35 72 17 1.1 16.00 0.22 2.8 4.30 5.20 2.9 9500 12000 1207 0.329
35 72 23 1.1 32.00 0.30 2.1 3.30 9.00 2.2 8000 9500 2207 0.404
35 72 23 1.1 16.00 0.22 2.8 4.30 5.20 2.9 7000 2207-2RS 0.434
35 80 21 1.5 25.00 0.26 2.5 3.80 8.00 2.6 8000 9500 1307 0.535
40 80 18 1.1 19.30 0.22 2.9 4.50 6.55 3.0 8500 10000 1208 0.417
40 80 23 1.1 31.50 0.26 2.4 3.80 9.50 2.5 7500 9000 2208 0.488
40 80 23 1.1 19.30 0.22 2.9 4.50 6.55 3.0 6300 2208-2RS 0.515
40 90 23 1.5 29.00 0.25 2.5 3.90 9.65 2.6 7000 8500 1308 0.742
45 85 19 1.1 22.00 0.21 3.0 4.70 7.35 3.2 7500 9000 1209 0.463
45 85 23 1.1 28.00 0.26 2.4 3.80 9.00 2.5 7000 8500 2209 0.527
45 85 23 1.1 22.00 0.21 3.0 4.70 7.35 3.2 5600 2209-2RS 0.543
45 100 25 1.5 38.00 0.25 2.5 3.90 12.90 2.6 6300 7500 1309 0.994
Fa ≤ e
Fa > e
Fr Fr
open
2-21
Self aligning ball bearings
Dimensions Load ratings · Faktor Limiting speed Bearing No. Weight
d D B r min. dynamic
C
static
C0
grease oil
mm mm mm mm kN e y1 y2 kN y0 min-1 min-1 kg
50 90 20 1.1 22.80 0.20 3.2 4.90 8.15 3.3 7000 8500 1210 0.531
50 90 23 1.1 28.00 0.24 2.6 4.10 9.50 2.7 6700 8000 2210 0.567
50 90 23 1.1 22.80 0.20 3.2 4.90 8.15 3.3 5300 2210-2RS 0.595
50 110 27 2.0 41.50 0.24 2.6 4.00 14.30 2.7 5600 6700 1310 1.290
55 100 21 1.5 27.00 0.19 3.3 5.10 10.00 3.5 6300 7500 1211 0.693
55 100 25 1.5 39.00 0.22 2.9 4.50 12.70 3.1 5600 6700 2211 0.763
55 100 25 1.5 27.00 0.19 3.3 5.10 10.00 3.5 4800 2211-2RS 0.796
55 120 29 2.0 51.00 0.24 2.7 4.10 18.00 2.8 5000 6000 1311 1.640
60 110 22 1.5 30.00 0.18 3.5 5.40 11.60 3.6 5600 6700 1212 0.900
60 110 28 1.5 47.50 0.23 2.7 4.20 16.60 2.8 5300 6300 2212 1.080
60 110 28 1.5 30.00 0.18 3.5 5.40 11.60 3.6 4300 2212-2RS 1.110
60 130 31 2.1 57.00 0.23 2.8 4.30 20.80 2.9 4500 5300 1312 2.030
Fa ≤ e
Fa > e
Fr Fr
Further sizes are available on request.
Angle adjustments
Self aligning ball bearings can be swiveled about 4° from the
center position. Sealed self-aligning ball bearings up to a
maximum of 1.5°.
open
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-22
Self aligning roller bearings (DIN 635 T2)
E = strengthened interior construction
A = steel retainer
B33 = lubrication groove and bore in outering
Dimensions Load ratings · Factor Limiting speed Bearing No. Weight
d D B r min. dynamic
C
static
C0
grease oil
mm mm mm mm kN e y1 y2 kN y0 min-1 min-1 kg
25 52 18 1.0 43 0.34 2.0 2.9 43 1.9 9100 11700 22205-EAB33 0.165
30 62 20 1.0 57 0.31 2.2 3.2 61 2.1 7600 9800 22206-EAB33 0.261
35 72 23 1.1 76 0.31 2.2 3.2 85 2.1 6500 8400 22207-EAB33 0.406
40 80 23 1.1 88 0.28 2.4 3.6 95 2.3 5800 7500 22208-EAB33 0.489
40 90 33 1.5 130 0.36 1.9 2.8 147 1.8 4300 5700 22308-EAB33 0.978
45 85 23 1.1 92 0.26 2.6 3.9 108 2.6 5400 6900 22209-EAB33 0.539
45 100 36 1.5 160 0.36 1.9 2.8 183 1.9 3800 4800 22309-EAB33 1.300
50 90 23 1.1 99 0.24 2.8 4.2 116 2.8 5000 6400 22210-EAB33 0.579
50 110 40 2.0 193 0.36 1.9 2.8 224 1.8 3400 4300 22310-EAB33 1.750
55 100 25 1.5 118 0.23 2.9 4.4 142 2.9 4500 5600 22211-EAB33 0.802
55 120 43 2.0 228 0.36 1.9 2.8 265 1.8 3200 4000 22311-EAB33 2.220
60 110 28 1.5 143 0.24 2.8 4.2 170 2.8 4000 5000 22212-EAB33 1.060
60 130 46 2.1 265 0.35 1.9 2.8 310 1.9 2800 3600 22312-EAB33 2.790
65 120 31 1.5 173 0.24 2.8 4.2 212 2.8 3600 4500 22213-EAB33 1.440
65 140 48 2.1 285 0.34 2.0 3.0 310 2.0 2600 3400 22313-EAB33 3.400
70 125 31 1.5 181 0.23 2.9 4.4 231 2.9 3600 4500 22214-EAB33 1.520
70 150 51 2.1 325 0.34 2.0 3.0 390 2.0 2400 3200 22314-EAB33 4.060
75 130 31 1.5 187 0.22 3.1 4.6 245 3.0 3400 4300 22215-EAB33 1.610
75 160 55 2.1 380 0.34 2.0 3.0 455 1.9 2200 3000 22315-EAB33 4.990
Fa ≤ e
Fa > e
Fr Fr
Further sizes are available on request.
Angle adjustments approx. 1°.
2-23
McGill self aligning roller bearing, single-row
McGill SPHERE-ROL bearings are dimensionally interchangeable with ordinary 2-row spherical roller bearings.
The main dimensions are according to ISO/R 15 and DIN 635
respectively DIN 616.
Misalignment up to ± 3° is accommodated by the unsealed
versions and up to ± 2° by the sealed versions.
Radial clearance for
”SB” Bearings with straight bores
Basic bore Radial clearance in µm
diameter
mm C2 Normal C3 C4
over incl. min. max. min. max. min. max. min. max.
14 24 10 20 20 36 36 46 46 61
24 30 15 25 25 41 41 56 56 71
30 40 15 30 30 46 46 61 61 81
40 50 20 36 36 56 56 76 76 99
50 65 25 43 43 66 66 91 91 119
65 80 30 51 51 81 81 112 112 145
80 100 36 63 63 99 99 135 135 180
100 120 43 79 79 122 122 163 163 211
120 140 51 97 97 145 145 191 191 241
140 160 61 109 109 165 165 221 221 279
160 180 66 119 119 180 180 241 241 310
180 200 71 130 130 201 201 262 262 338
200 225 81 140 140 221 221 290 290 378
225 250 91 150 150 241 241 320 320 419
250 280 99 170 170 262 262 351 351 457
Basic bore Radial clearance in µm
diameter
mm C2 Normal C3 C4
over incl. min. max. min. max. min. max. min. max.
14 24 15 25 25 36 36 46 46 61
24 30 20 30 30 43 43 56 56 76
30 40 20 36 36 51 51 66 66 86
40 50 30 46 46 61 61 81 81 104
50 65 36 56 56 76 76 99 99 124
65 80 46 71 71 94 94 124 124 155
80 100 51 81 81 112 112 145 145 191
100 120 64 99 99 135 135 175 175 226
120 140 76 119 119 160 160 206 206 259
140 160 86 130 130 180 180 231 231 300
160 180 94 140 140 201 201 259 259 340
180 200 104 160 160 224 224 290 290 371
200 225 119 180 180 251 251 320 320 411
225 250 135 201 201 269 269 356 356 452
250 280 150 221 221 300 300 396 396 495
Radial clearance for
”SB” Bearings with tapered (”K” type) bore
Pe r fec t qua l i t y and dynamic
Bearings and steel balls
2-24
Self aligning roller bearings McGill
Bearing No. Bore Outside diameter Width Shoulder dimensions Limiting speed Load ratings Weight
A Toleran.
*
B Tolerance
*
C Toleran.
*
r **
D E H J
min
oil
***
dynamic
C
static
C0
mm µm mm µm mm µm mm mm mm mm mm U/min kN kN kg
SB 22204-W33-SS 20 -10 47 -13 18 -127 1.0 25.4 41.3 3.2 2.4 11000 32.21 25.80 0.150
SB 22205-W33-SS 25 -10 52 -13 18 -127 1.0 31.0 46.0 4.0 2.4 10000 39.01 32.47 0.180
SB 22206-W33-SS 30 -10 62 -13 20 -127 1.0 36.5 55.6 4.0 2.4 8100 53.98 47.60 0.290
SB 22207-W33-SS 35 -13 72 -13 23 -127 1.0 41.3 61.9 4.4 2.4 6800 73.48 64.94 0.430
SB 22208-W33-SS 40 -13 80 -13 23 -127 1.0 47.6 69.9 4.4 2.4 6000 79.38 72.06 0.540
SB 22209-W33-SS 45 -13 85 -15 23 -127 1.0 52.4 74.6 4.4 2.4 5600 84.37 78.73 0.590
SB 22210-W33-SS 50 -13 90 -15 23 -127 1.0 57.2 85.7 4.4 2.4 5250 88.00 85.85 0.640
SB 22211-W33-SS 55 -15 100 -15 25 -152 1.5 63.5 88.9 4.4 2.4 4650 111.13 102.31 0.860
SB 22212-W33-SS 60 -15 110 -15 28 -152 1.5 69.9 98.4 4.4 2.4 4200 141.07 137.45 1.018
SB 22213-W33-SS 65 -15 120 -15 31 -152 1.5 74.6 106.4 4.8 3.2 3800 163.30 173.48 1.540
SB 22215-W33-SS 75 -15 130 -20 31 -152 1.5 84.1 117.5 4.8 3.2 3500 180.99 184.16 1.770
SB 22216-W33-SS 80 -15 140 -20 33 -152 2.0 90.5 125.4 5.6 3.2 3250 197.77 216.18 2.090
SB 22217-W33-SS 85 -20 150 -20 36 -203 2.0 95.3 134.9 5.6 3.2 3000 224.53 262.89 2.680
SB 22218-W33-SS 90 -20 160 -25 40 -203 2.0 100.0 144.5 5.6 3.2 2800 278.06 308.26 3.040
SB 22219-W33-SS 95 -20 170 -25 43 -203 2.0 106.4 154.0 8.3 3.2 2650 312.98 377.65 4.170
SB 22220-W33-SS 100 -20 180 -25 46 -203 2.0 112.7 161.9 8.3 3.2 2500 350.63 411.91 5.040
SB 22222-W33-SS 110 -20 200 -31 53 -203 2.0 123.8 181.0 8.3 3.2 2200 458.14 551.60 7.210
SB 22224-W33-SS 120 -20 215 -31 58 -203 2.0 134.9 195.3 11.1 4.8 2050 548.86 653.89 8.980
SB 22226-W33-SS 130 -25 230 -31 64 -254 2.5 149.2 211.1 11.1 4.8 1900 607.82 742.85 11.300
SB 22228-W33-SS 140 -25 250 -31 68 -254 2.5 158.8 230.2 11.1 4.8 1750 743.90 889.64 14.200
SB 22230-W33-SS 150 -25 270 -36 73 -254 2.5 169.9 246.1 13.9 4.8 1600 775.66 938.57 17.900
Consult factory for availability.
1. Add suffix „K“ to indicate tapered bore bearing.
2. All sizes supplied with outer ring relubrication feature (-W33) unless otherwise specified. Consult factory for availability of non-W33.
3. Add suffix „-W22“ for selected OD.
4. Add suffix „S“ to bearing number for single seal and „SS“ for double seals. For tapered bore bearings using single seal, add suffix „S“ to
indicate seal on small bore side and „SL“ to indicate seal on large bore side. For high temp. seals, use „TS“, „TSS“, and high temp. grease.
5. For LAMBDA seals, add suffix „YS“ to bearing number for single seal and „YSS“ for double seals. For tapered bore bearings, single LAMBDA sealed, add suffix „YS“ to indicate seal on small bore side and „YSL“ to indicate seal on large bore side.
CAUTION: Sizes SB 22202 through SB 22211 and SB 22214 and SB 22215, standard AFBMA locknuts and lockwashers will not clear LAMBDA
seal I.D. unless 1/16" thick spacer is used between face of bearing and washer (or locknut).
6. For expansion-type bearing, add suffix „E“ to catalog number immediately after diametral clearance specifications."
*) Tolerances from 0 up to shown figure.
**) r = maximum fillet radius for shaft and housing.
***) Refers to oil lubrication and moderate load. For grease lubrication, use 1/2 of the values shown.
cylindrical bore sealed LAMBDA SEALS
2-25
Taper roller bearings with cylindrical bore (DIN ISO 355 und DIN 720)
Dimensions Load ratings Limiting speed Bearing No. Weight
d D B C T r,r1
min.
a approx.
dynamic C
e y static
C0
y0 grease oil
mm mm mm mm mm mm mm kN kN min-1 min-1 kg
15 35 11 10 11.75 0.6 10 12.0 0.46 1.3 12.0 0.7 12000 17000 30202-A 0.055
15 42 13 11 14.25 1.0 10 21.6 0.29 2.1 20.4 1.2 10000 15000 30302-A 0.099
17 40 12 11 13.25 1.0 10 18.6 0.35 1.7 19.6 1.0 10000 15000 30203-A 0.081
17 47 14 12 15.25 1.0 10 26.5 0.29 2.1 25.0 1.2 9000 13000 30303-A 0.133
20 47 14 12 15.25 1.0 11 26.5 0.35 1.7 27.5 1.0 8500 12000 30204-A 0.129
20 52 15 13 16.25 1.5 11 32.5 0.30 2.0 32.5 1.1 8000 11000 30304-A 0.175
25 52 15 13 16.25 1.0 13 30.5 0.37 1.6 34.5 0.9 7500 10000 30205-A 0.157
25 62 17 15 18.25 1.5 13 44.0 0.30 2.0 45.0 1.1 6700 9000 30305-A 0.273
30 62 16 14 17.25 1.0 14 41.5 0.37 1.6 48.0 0.9 6300 8500 30206-A 0.240
30 72 19 16 20.75 1.5 15 56.0 0.31 1.9 61.0 1.1 5600 7500 30306-A 0.407
35 72 17 15 18.25 1.5 15 50.0 0.37 1.6 58.5 0.9 5300 7000 30207-A 0.341
35 80 21 18 22.75 1.5 16 69.5 0.31 1.9 76.5 1.1 5000 6700 30307-A 0.541
40 80 18 16 19.75 1.5 17 58.5 0.37 1.6 67.0 0.9 4800 6300 30208-A 0.436
40 90 23 20 25.25 1.5 20 86.5 0.35 1.7 104.0 1.0 4300 5600 30308-A 0.769
45 85 19 16 20.75 1.5 18 67.0 0.40 1.5 83.0 0.8 4300 5600 30209-A 0.499
45 100 25 22 27.25 1.5 21 104.0 0.35 1.7 125.0 1.0 3800 5000 30309-A 1.020
50 90 20 17 21.75 1.5 20 75.0 0.42 1.4 96.5 0.8 4000 5300 30210-A 0.566
50 110 27 23 29.25 2.0 23 122.0 0.35 1.7 150.0 1.0 3400 4500 30310-A 1.300
Further sizes are available on request.
Pe r fec t qua l i t y and dynamic
Angle adjustments
Self aligning ball bearings can be swiveled about 4° from the center position.
Sealed self-aligning ball bearings up to a maximum of 1.5°.
Bearings and steel balls
2-26
Deep groove ball thrust bearing (DIN 711)
Dimensions Load ratings Limiting speed Bearing No. Weight
d dg Dw Dg H r min. dynamic C static C0 grease oil
mm mm mm mm mm mm kN kN min-1 min-1 kg
10 11 24 24 9 0.3 10.0 14.0 7000 9500 51100 0.021
10 12 26 26 11 0.6 12.7 17.0 6000 8000 51200 0.031
12 13 26 26 9 0.3 10.4 15.3 6700 9000 51101 0.023
12 14 28 28 11 0.6 13.2 19.0 6000 8000 51201 0.034
15 16 28 28 9 0.3 9.3 14.0 6300 8500 51102 0.024
15 17 32 32 12 0.6 16.6 25.0 5000 6700 51202 0.046
17 18 30 30 9 0.3 9.6 15.3 6300 8500 51103 0.026
17 19 35 35 12 0.6 17.3 27.5 5000 6700 51203 0.053
20 21 35 35 10 0.3 12.7 20.8 5300 7000 51104 0.039
20 22 40 40 14 0.6 22.4 37.5 4300 5600 51204 0.083
25 26 42 42 11 0.6 15.6 29.0 4800 6300 51105 0.060
25 27 47 47 15 0.6 28.0 50.0 3800 5000 51205 0.115
30 32 47 47 11 0.6 16.6 33.5 4300 5600 51106 0.069
30 32 52 52 16 0.6 22.5 47.5 3600 4800 51206 0.134
35 37 52 52 12 0.6 17.6 37.5 4000 5300 51107 0.087
35 37 62 62 18 1.0 35.5 67.0 3000 4000 51207 0.215
40 42 60 60 13 0.6 23.2 50.0 3400 4500 51108 0.125
40 42 68 68 19 1.0 46.5 98.0 2800 3800 51208 0.278
45 47 65 65 14 0.6 24.5 57.0 3400 4500 51109 0.153
45 47 73 73 20 1.0 39.0 80.0 2600 3600 51209 0.302
50 52 70 70 14 0.6 25.5 63.0 3200 4300 51110 0.169
50 52 78 78 22 1.0 50.0 106.0 2400 3400 51210 0.371
55 57 78 78 16 0.6 31.0 78.0 2800 3800 51111 0.247
55 57 90 90 25 1.0 61.0 134.0 2200 3200 51211 0.586
60 62 85 85 17 1.0 36.5 93.0 2600 3600 51112 0.330
60 62 95 95 26 1.0 62.0 140.0 2000 3000 51212 0.651
65 67 90 90 18 1.0 37.5 98.0 2400 3400 51113 0.359
65 67 100 100 27 1.0 64.0 150.0 2000 3000 51213 0.737
70 72 95 95 18 1.0 37.5 104.0 2400 3400 51114 0.385
70 72 105 105 27 1.0 65.5 160.0 1900 2800 51214 0.783
75 77 100 100 19 1.0 44.0 137.0 2200 3200 51115 0.520
75 77 110 110 27 1.0 67.0 170.0 1900 2800 51215 0.827
80 82 105 105 19 1.0 45.0 140.0 2200 3200 51116 0.557
80 82 115 115 28 1.0 75.0 190.0 1800 2600 51216 0.908
85 87 110 110 19 1.0 45.5 150.0 2200 3200 51117 0.597
85 88 125 125 31 1.0 98.0 250.0 1600 2200 51217 1.220
90 92 120 120 22 1.0 60.0 190.0 1900 2800 51118 0.878
90 93 135 135 35 1.1 120.0 300.0 1500 2000 51218 1.680
Further sizes are available on request.
2-27
Tolerances of hardened steel balls (DIN 5401, version 2002, 08)
Grade Diameter Tolerances of a ball in the lot Tolerance Sorting range and
of the ball classification
Nominal size Size tolerance Shape tolerance Roughness of a lot Sorting interval
Dw VDws tDw Ra VDwL
1) IG; St
greater than up to max. max. max. max.
mm µm µm µm
G3*) - 12 0.08 0.08 0.01 0.13 0.5 -5…-0.5 0 +0.5…+5
G5*) - 12 0.13 0.13 0.014 0.25 1 -5…-1 0 +1…+5
G10*) - 25 0.25 0.25 0.02 0.5 1 -9…-1 0 +1…+9
G16*) - 25 0.4 0.4 0.025 0.8 2 -10…-2 0 +2…+10
G20*) - 38 0.5 0.5 0.032 1 2 -10…-2 0 +2…+10
G28*) - 50 0.7 0.7 0.05 1.4 2 -12…-2 0 +2…+12
G40*) - 100 1 1 0.06 2 4 -16…-4 0 +4…+16
G100 - 150 2.5 2.5 0.125 5 10 -40…-10 0 +10…+40
G200 - 150 5 5 0.2 10 15 -60…-15 0 +15…+60
G500 - 25 25 25 - 50 50 -50 0 +50
25 50 25 25 - 75 75 -75 0 -75
50 75 25 25 - 100 100 -100 0 +100
75 100 32 32 - 125 125 -125 0 +125
100 125 38 38 - 150 150 -150 0 +150
125 150 44 44 - 175 175 -175 0 +175
G600 all - - - - 400 - 0
G700 all - - - - 2000 - 0
1) Tolerance VDwA at G500 to 700 instead of VDwL *) only upon request
Hardness of hardened roller bearing steels in accordance with DIN 17 230
Dw greater than up to hardness*)
- 12.7 740 up to 900 HV 10**)
12.7 50.8 60 up to 66 HRC
50.8 70 59 up to 65 HRC
70 120 57 up to 63 HRC
120 150 55 up to 61 HRC
*) Surface hardness
These hardness values are attained during heat treatment. The subsequent hardness processing causes cold solidification in the outer
marginal zone, leading to certain hardness increases that cannot be calculated for. In the surface region, the upper limit value thus may be
slightly exceeded.
For large balls, the core hardness may be slightly less than the values measured in the marginal zones.
**) 62 to 67 HRC are also admissible; the Vickers test is, however, binding.
ASK Steel balls
Pe r fec t qua l i t y and dynamic
2-28
Bearings and steel balls
Tolerances of hardened balls made of stainless steel (DIN 5401, version 2002,08)
Diameter Tolerances of a ball in the lot Tolerance Sorting range and classification
of the ball
Nominal size Size tolerance Shape tolerance of a lot Sorting interval
Dw VDws tDw VDwA IG
greater than up ro max. max. max.
mm µm µm µm
- 25 1 2 4 4 -20 -8 -4 0 +4 +8 +20
25 50 1.5 3 6 6 -24 -12 -6 0 +6 +12 +24
50 75 2 4 8 8 -32 -16 -8 0 +8 +16 +32
75 100 2.5 5 10 10 -40 -20 -10 0 +10 +20 +40
100 125 3 6 12 12 -48 -24 -12 0 +12 +24 +48
125 150 3.5 7 14 14 -56 -28 -14 0 +14 +28 +56
Hardness and materials
Class Material No. Abbreviation, alloy Hardness
Stainless steel Dw ≤ 12,7 mm Dw ≤ 12,7 mm
1.3541 X 45 Cr 13 580 to 700 HV 10 54 to 60 HRC
heat treatable 1.4034 X 46 Cr 13 580 to 700 HV 10 54 to 60 HRC
hardened 1.4037 X 65 Cr 13 640 to 780 HV 10 57 to 63 HRC
in accordance 1.3543 X 102 Cr Mo 17 640 to 780 HV 10 57 to 63 HRC
with DIN 17 230 1.3549 X 89 Cr Mo V 18 l 640 to 780 HV 10 57 to 63 HRC
non heat-treatable 1.4301 X 5 Cr Ni 18 10 135 to 200 HV 10
in accordance 1.4571 X 6 Cr Ni Mo Ti 17 12 2 135 to 200 HV 10
wtih DIN 17 440 1.4580 X 6 Cr Ni Mo Nb 17 12 2 135 to 200 HV 10
Copper-zinc alloy 2.1030 Cu Sn 8 200 to 220 HB
in accordance
with DIN 17 662
Copper-tin alloy 2.0321 Cu Zn 37 180 to 200 HB
in accordance 2.0360 Cu Zn 40 180 to 200 HB
with DIN 17 660
Tolerances of non heat-treatable balls made of stainless steel (DIN 5401 T1, version 2002,08)
Copper-tin alloy
Copper-zinc alloy
Diameter Tolerances of a ball in the lot Tolerance Sorting range and classification
of the ball
Nominal size Size tolerance Shape tolerance of a lot Sorting interval
Dw VDws tDw VDwA IG
greater than up to max. max. max.
mm µm µm µm
- 25 5 10 20 20 -60 -40 -20 0 +20 +40 +60
25 50 7.5 15 30 30 -90 -60 -30 0 +30 +60 +90
50 75 10 20 40 40 -120 -80 -40 0 +40 +80 +120
2-29
Bore diameter and weights for steel balls made of
through-hardened bearing steel
Bore diameter and weights for steel balls made of
hardened stainless steel
Bore diameter Weight
of steel ball 1000 piece
Dw (7.85 g/cm
2)
kg mm (Inch) wppr.
1.588 (1/16 Inch) 0.0165
2 0.0329
2.381 (3/32 Inch) 0.0555
2.5 0.0642
3 0.1110
3.175 (1/8 Inch) 0.1320
3.5 0.1760
3.969 (5/32 Inch) 0.2570
4 0.2630
4.5 0.3750
4.762 (3/16 Inch) 0.4440
5 0.5140
5.5 0.6840
5.556 (7/32 Inch) 0.7050
6 0.8880
6.350 (1/4 Inch) 1.0500
6.5 1.1300
7 1.4100
7.144 (9/32 Inch) 1.5000
7.5 1.7300
7.938 (5/16 Inch) 2.0600
8 2.1100
8.5 2.5200
8.731 (11/32 Inch) 2.7400
9 3.0000
9.525 (3/8 Inch) 3.5500
10 4.1100
10.319 (13/32 Inch) 4.5200
11 5.4700
11.112 (7/16 Inch) 5.6400
11.906 (15/32 Inch) 6.9400
12 7.1000
12.5 8.0300
12.7 8.4200
13 9.0300
13.494 (17/32 Inch) 10.1000
14 11.3000
14.288 (9/16 Inch) 12.0000
15 13.9000
15.081 (19/32 Inch) 14.1000
15.875 (5/8 Inch) 16.4000
16 16.8000
16.669 (21/32 Inch) 19.0000
17 20.2000
17.462 (11/16 Inch) 21.9000
18 24.0000
18.256 (23/32 Inch) 25.0000
19 28.2000
19.05 (3/4 Inch) 28.4000
19.844 (25/32 Inch) 32.1000
20 32.9000
20.638 (13/16 Inch) 36.1000
21 38.1000
22 43.8000
22.225 (7/8 Inch) 45.1000
23.812 (15/16 Inch) 55.5000
24 56.8000
25 64.2000
Bore diameter Weight
of steel ball 1000 piece
Dw (7.7 g/cm
2)
kg mm (Inch) appr.
1.588 (1/16 Inch) 0.0136
2 0.0323
2.381 (3/32 Inch) 0.0544
2.5 0.0630
3 0.1090
3.175 (1/8 Inch) 0.1270
3.5 0.1730
3.969 (5/32 Inch) 0.2520
4 0.2580
4.5 0.3670
4.762 (3/16 Inch) 0.4350
5 0.5040
5.5 0.6710
5.556 (7/32 Inch) 0.6910
6 0.8710
6.350 (1/4 Inch) 1.0300
6.5 1.1070
7 1.3800
7.144 (9/32 Inch) 1.4700
7.5 1.7000
7.938 (5/16 Inch) 2.0200
8 2.0600
8.5 2.4760
8.731 (11/32 Inch) 2.6800
9 2.9400
9.525 (3/8 Inch) 3.4800
10 4.0300
10.319 (13/32 Inch) 4.4300
11 5.3660
11.112 (7/16 Inch) 5.5300
11.906 (15/32 Inch) 6.8040
12 6.9700
12.5 7.8700
12.7 8.2600
13 8.8600
13.494 (17/32 Inch) 9.9060
14 11.1000
14.288 (9/16 Inch) 11.7600
15 13.6000
15.081 (19/32 Inch) 13.8280
15.875 (5/8 Inch) 16.1000
16 16.5000
16.669 (21/32 Inch) 18.6730
17 19.8070
17.462 (11/16 Inch) 21.4700
18 23.5000
18.256 (23/32 Inch) 24.5300
19 27.6500
19.05 (3/4 Inch) 27.9000
19.844 (25/32 Inch) 31.5000
20 32.3000
20.638 (13/16 Inch) 35.4400
21 37.3400
22 42.9000
22.225 (7/8 Inch) 44.2600
23.812 (15/16 Inch) 54.4300
24 55.7340
25 63.0000
Further sizes are available on request.
Pe r fec t qua l i t y and dynamic
Inserts P. 3-3
Cast iron version P. 3-10
Pillow blocks P. 3-10
Square flange units P. 3-14
Flange cartridge units P. 3-16
Two-bolt flange units P. 3-18
Take-up units P. 3-19
Cartridge units P. 3-21
Stainless steel version P. 3-22
Pressed steel version P. 3-24
Silver version P. 3-26
Stainless silver version P. 3-28
Plastic version P. 3-29
Bearing units
Cast iron version
Stainless steel
version
Pressed steel
version
Silver version
Stainless silver
version
Plastic version
Cast iron version
Stainless steel
version
Plastic version
Cast iron version Cast iron version
Cast iron version
Stainless steel version
Plastic version
Cast iron version
Stainless steel
version
Pressed steel
version
Silver version
Stainless
silver version
Plastic version
Pressed steel
version
A
S
K
B
e a ri n g u n it s Pe r fec t qua l i t y and dynamic
3-2
Bearing units
Selection of shaft
For the units with cylindrical bore (with set-screws or eccentric
locking collar) clearance fit is usually favoured for mounting
the units on the shaft.
set-screw tightening torque for inserts Nm
UC 201 - 206
UC 207 - 209
UC 210 - 212
UC 213 - 218
UC 305 - 306
UC 307
UC 308 - 309
UC 310 - 314
UC 315 - 316
UC 317 - 318
MUC 204 - 206
MUC 207 - 209
MUC 210
3.80
8.30
16.00
25.00
30.00
58.00
set-screw tightening torque for inserts Nm
KH 201 - 205
KH 206 - 210
B 201 - 204
B 205 - 206
B 207
K 000 - 001
K 002 - 003
K 004 - 006
0.55
1.45
2.50
3.90
8.50
11.00
Regreasing intervals
The usable life of the grease is influenced by many factors.
The regreasing intervals in our table thus can only be seen as
very rough estimates.
Experience with comparable bearings or ones already
used is therefore very important as not all operating
conditions and influential factors that affect the service
life of a lubricant – and hence also the bearing – are
known or determinable in many cases.
°C Clean Dirty
Very dirty
heavily humid
50 3 years 6 months 3 months
70 1 year 2 months 1 month
100 3 months 2 weeks 1 week
Greasing interval
Environmental condition
Operating
temperature
of bearing
Greasing interval
3-3
INSERTS
Insert
UC 200
Normal duty
Set-screw locking
UC 201 12 47 31.0 17 12.7 18.3 4.8 3.7 9.88 6.20 0.20
UC 202 15 47 31.0 17 12.7 18.3 4.8 3.7 9.88 6.20 0.19
UC 203 17 47 31.0 17 12.7 18.3 4.8 3.7 9.88 6.20 0.18
UC 204 20 47 31.0 17 12.7 18.3 4.8 3.7 9.88 6.20 0.16
UC 205 25 52 34.1 17 14.3 19.7 5.0 3.9 10.78 6.98 0.20
UC 206 30 62 38.1 19 15.9 22.2 5.0 5.0 14.97 10.04 0.32
UC 207 35 72 42.9 20 17.5 25.4 7.0 5.7 19.75 13.67 0.48
UC 208 40 80 49.2 21 19.0 30.2 8.0 6.2 22.71 15.94 0.64
UC 209 45 85 49.2 22 19.0 30.2 8.0 6.4 24.36 17.71 0.68
UC 210 50 90 51.6 24 19.0 32.6 10.0 6.5 26.98 19.84 0.80
UC 211 55 100 55.6 25 22.2 33.4 10.0 7.0 33.37 25.11 1.11
UC 212 60 110 65.1 27 25.4 39.7 10.0 7.6 36.74 27.97 1.54
UC 213 65 120 65.1 28 25.4 39.7 10.0 8.5 44.01 34.18 1.85
UC 214 70 125 74.6 29 30.2 44.4 12.0 8.9 46.79 37.59 2.05
UC 215 75 130 77.8 30 33.3 44.5 12.0 9.2 50.85 41.26 2.21
UC 216 80 140 82.6 32 33.3 49.3 12.0 9.5 55.04 45.09 2.80
UC 217 85 150 85.7 34 34.1 51.6 12.0 10.2 64.01 53.28 3.46
UC 218 90 160 96.0 36 39.7 56.3 12.0 11.1 73.83 60.76 4.36
Designation d D Bi Be n m G T Load ratings Weight
mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Pe r fec t qua l i t y and dynamic
Bearing units
3-4
Insert
UC 300
Heavy duty
Set-screw locking
UC 305 25 62 38 20 15 23 6 5.4 17.22 11.93 0.35
UC 306 30 72 43 23 17 26 6 5.7 20.77 14.17 0.56
UC 307 35 80 48 25 19 29 8 6.2 25.66 17.92 0.71
UC 308 40 90 52 27 19 33 10 7.0 31.35 22.38 0.96
UC 309 45 100 57 30 22 35 10 7.8 40.66 30.00 1.28
UC 310 50 110 61 32 22 39 12 8.5 47.58 35.71 1.65
UC 311 55 120 66 34 25 41 12 9.2 55.05 41.91 2.07
UC 312 60 130 71 36 26 45 12 9.8 62.88 48.60 2.60
UC 313 65 140 75 38 30 45 12 10.5 72.21 56.68 3.25
UC 314 70 150 78 40 33 45 12 11.1 80.10 63.48 3.89
UC 315 75 160 82 42 32 50 14 11.8 87.25 71.67 4.72
UC 316 80 170 86 44 34 52 14 12.5 94.57 80.35 5.55
UC 317 85 180 96 46 40 56 16 13.1 102.05 89.52 6.67
UC 318 90 190 96 48 40 56 16 13.8 110.81 100.76 7.56
Designation d D Bi Be n m G T Load ratings Weight
mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg 3-5
Insert
UK 200+H
Normal duty
Adapter sleeve locking
UK 205+H2305 20 52 35 25 23 17 3.9 8 38 10.78 6.98 0.25
UK 206+H2306 25 62 38 30 26 19 5.0 8 45 14.97 10.04 0.36
UK 207+H2307 30 72 43 35 29 20 5.7 9 52 19.75 13.67 0.57
UK 208+H2308 35 80 46 40 31 21 6.2 10 58 22.71 15.94 0.74
UK 209+H2309 40 85 50 45 31 22 6.4 11 65 24.36 17.71 0.83
UK 210+H2310 45 90 55 50 32 24 6.5 12 70 26.98 19.84 0.97
UK 211+H2311 50 100 59 55 35 25 7.0 12 75 33.37 25.11 1.26
UK 212+H2312 55 110 62 60 38 27 7.6 13 80 36.74 27.97 1.59
UK 213+H2313 60 120 65 65 40 28 8.5 14 85 44.01 34.18 1.76
UK 215+H2315 65 130 73 75 44 30 9.2 15 98 50.85 41.26 2.32
UK 216+H2316 70 140 78 80 45 32 9.5 17 105 55.04 45.09 3.06
UK 217+H2317 75 150 82 85 46 34 10.2 18 110 64.01 53.28 3.88
UK 218+H2318 80 160 86 90 47 36 11.2 18 120 73.83 60.76 4.74
Designation d D L d1 Bi Be T Y W Load ratings Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Pe r fec t qua l i t y and dynamic
taper
Bearing units
3-6
Insert
UK 300+H
Heavy duty
Adapter sleeve locking
UK 305+H2305 20 62 35 25 26 20 5.4 8 38 21.7 10.9 0.48
UK 306+H2306 25 72 38 30 29 23 5.7 8 45 27.3 14.2 0.59
UK 307+H2307 30 80 43 35 33 25 6.2 9 52 34.0 18.2 0.74
UK 308+H2308 35 90 46 40 34 27 7.0 10 58 41.5 22.7 1.01
UK 309+H2309 40 100 55 45 37 30 8.5 12 70 52.2 30.5 1.31
UK 310+H2310 45 110 55 50 41 32 8.5 12 70 63.0 36.5 1.68
UK 311+H2311 50 120 59 55 44 34 9.2 12 75 73.0 42.5 2.06
UK 312+H2312 55 130 62 60 47 36 9.8 13 80 83.0 49.0 2.53
UK 313+H2313 60 140 65 65 49 38 10.5 14 85 94.5 56.5 3.07
UK 315+H2315 65 160 73 75 55 42 11.8 15 98 116.0 72.0 4.74
UK 316+H2316 70 170 78 80 55 44 12.5 17 105 125.0 81.5 5.62
UK 317+H2317 75 180 82 85 60 46 13.1 18 110 135.0 91.0 6.56
UK 318+H2318 80 190 86 90 63 48 13.8 18 120 146.0 101.0 7.52
Insert
B 200
Light duty
Set-screw locking
B 201 12 40 22 12 6.0 16.0 4.5 7.36 4.48 0.10
B 202 15 40 22 12 6.0 16.0 4.5 7.36 4.48 0.10
B 203 17 40 22 12 6.0 16.0 4.5 7.36 4.48 0.09
B 204 20 47 25 14 7.0 18.0 4.5 9.88 6.20 0.13
B 205 25 52 27 15 7.5 19.5 5.5 10.78 6.98 0.16
B 206 30 62 30 16 8.0 22.0 6.0 14.97 10.04 0.25
B 207 35 72 32 17 8.5 23.5 6.5 19.75 13.67 0.38
Designation d D L d1 Bi Be T Y W Load ratings Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Designation d D Bi Be n m G Load ratings Weight
mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg taper
3-7
Insert
KH 200+ER
Light duty
Spherical outer ring
Eccentric collar locking
KH 201+ER 12 40 28.6 19.1 12 3.6 6.5 28.6 13.5 9.60 4.60 0.12
KH 202+ER 15 40 28.6 19.1 12 3.6 6.5 28.6 13.5 9.60 4.60 0.11
KH 203+ER 17 40 28.6 19.1 12 3.6 6.5 28.6 13.5 9.60 4.60 0.10
KH 204+ER 20 47 31.0 21.5 14 4.1 7.5 33.3 13.5 12.80 6.35 0.16
KH 205+ER 25 52 31.0 21.5 15 4.1 7.5 38.1 13.5 14.00 7.30 0.20
KH 206+ER 30 62 35.7 23.8 16 4.9 9.0 44.5 15.9 19.50 10.50 0.31
KH 207+ER 35 72 38.9 25.4 17 5.4 9.5 55.6 17.5 25.70 14.30 0.49
KH 208+ER 40 80 43.7 30.2 18 5.9 11.0 60.3 18.3 29.50 16.50 0.62
KH 209+ER 45 85 43.7 30.2 19 6.2 11.0 63.5 18.3 31.60 18.90 0.65
KH 210+ER 50 90 43.7 30.2 20 6.5 11.0 69.9 18.3 35.00 21.10 0.95
KH 211+ER 55 100 48.4 32.5 21 7.0 12.0 76.2 20.7 43.50 26.70 0.94
Insert
MUC 200
Normal duty in stainless steel
Set-screw locking
MUC 204 20 47 31.0 17 12.7 18.3 5.0 4.3 9.88 6.20 0.16
MUC 205 25 52 34.1 17 14.3 19.8 5.4 4.0 7.36 6.98 0.18
MUC 206 30 62 38.1 19 15.9 22.2 5.5 5.3 14.97 10.04 0.33
MUC 207 35 72 42.9 20 17.5 25.4 6.9 5.8 19.75 13.67 0.49
MUC 208 40 80 49.2 21 19.0 30.2 8.0 6.2 22.71 15.94 0.65
MUC 209 45 85 49.2 22 19.0 30.2 8.0 6.5 24.36 17.71 0.71
MUC 210 50 90 51.6 24 19.0 32.6 10.0 7.0 26.98 19.84 0.80
Designation d D L Bi Be T n W K Load ratings Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Designation d D Bi Be n m G T Load ratings Weight
mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Pe r fec t qua l i t y and dynamic
spherical o.d.
Bearing units
3-8
Insert
K 000
Normal version for silver-series
Set-screw locking
K000 10 26 14.0 8 4.0 3.0 4.60 1.96 0.02
K001 12 28 14.5 8 4.0 3.0 5.09 2.40 0.03
K002 15 32 16.5 9 4.5 3.5 5.58 2.84 0.04
K003 17 35 17.5 10 5.0 3.5 5.97 3.28 0.05
K004 20 42 21.0 12 6.0 4.0 9.35 5.04 0.09
K005 25 47 22.5 12 6.0 4.5 10.09 5.83 0.10
K006 30 55 24.5 13 6.5 5.0 13.23 8.28 0.15
Insert
U 000+ER
Special version for silver series
Eccentric collar locking
U000+ER 10 26 17.5 11.0 8 4.0 8.5 17 4.60 1.96 0.03
U001+ER 12 28 17.5 11.0 8 4.0 8.5 19 5.09 2.40 0.04
U002+ER 15 32 18.5 12.0 9 4.5 8.5 22 5.58 2.84 0.05
U003+ER 17 35 20.5 13.5 10 5.0 9.5 25 5.97 3.28 0.06
U004+ER 20 42 24.5 16.5 12 6.0 11.0 30 9.35 5.04 0.10
U005+ER 25 47 25.5 17.5 12 6.0 12.0 36 10.09 5.83 0.14
U006+ER 30 55 26.5 18.5 13 6.5 12.0 42 13.23 8.28 0.14
U007+ER 35 62 29.5 20.0 14 7.0 13.5 48 15.92 10.29 0.25
Designation d D Bi Be n G Load ratings Weight
mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Designation d D L Bi Be n k W Load ratings Weight
mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg 3-9
Insert
MU 000+ER
Special version for silver-stainlesssteel-series made of stainless steel
Eccentric collar locking
MU000+ER 10 26 17.5 11.0 8 4.0 8.5 17 4.00 1.60 0.03
MU001+ER 12 28 17.5 11.0 8 4.0 8.5 19 4.40 1.95 0.04
MU002+ER 15 32 18.5 12.0 9 4.5 8.5 22 4.85 2.30 0.05
MU003+ER 17 35 20.5 13.5 10 5.0 9.5 25 5.20 2.70 0.06
MU004+ER 20 42 24.5 16.5 12 6.0 11.0 30 8.10 4.10 0.10
MU005+ER 25 47 25.5 17.5 12 6.0 12.0 36 8.75 4.75 0.14
MU006+ER 30 55 26.5 18.5 13 6.5 12.0 42 11.50 6.75 0.14
Designation d D L Bi Be n k W Load ratings Weight
mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg Pe r fec t qua l i t y and dynamic
Bearing units
3-10
CAST IRON version pillow blocks
Pillow block
UCP 200
Normal duty
Set-screw locking
Insert UC 200
UCP 201 12 30.2 127 95 38 13 19 14 62 31.0 12.7 M10 0.69
UCP 202 15 30.2 127 95 38 13 19 14 62 31.0 12.7 M10 0.69
UCP 203 17 30.2 127 95 38 13 19 14 62 31.0 12.7 M10 0.68
UCP 204 20 33.3 127 95 38 13 19 14 65 31.0 12.7 M10 0.66
UCP 205 25 36.5 140 105 38 13 19 15 71 34.1 14.3 M10 0.81
UCP 206 30 42.9 165 121 48 17 20 17 84 38.1 15.9 M14 1.24
UCP 207 35 47.6 167 127 48 17 20 18 93 42.9 17.5 M14 1.58
UCP 208 40 49.2 184 137 54 17 20 18 100 49.2 19.0 M14 1.89
UCP 209 45 54.0 190 146 54 17 20 20 106 49.2 19.0 M14 2.14
UCP 210 50 57.2 206 159 60 20 23 21 113 51.6 19.0 M16 2.66
UCP 211 55 63.5 219 171 60 20 23 23 125 55.6 22.2 M16 3.31
UCP 212 60 69.8 241 184 70 20 23 25 138 65.1 25.4 M16 4.90
UCP 213 65 76.2 265 203 70 25 28 27 150 65.1 25.4 M20 5.15
UCP 214 70 79.4 266 210 72 25 28 27 156 74.6 30.2 M20 6.20
UCP 215 75 82.6 275 217 74 25 28 28 162 77.8 33.3 M20 7.16
UCP 216 80 88.9 292 232 78 25 28 30 174 82.6 33.3 M20 8.10
UCP 217 85 95.2 310 247 83 25 28 32 185 85.7 34.1 M20 9.81
UCP 218 90 101.6 327 262 88 27 30 33 198 96.0 39.7 M22 11.96
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
*) grease nipple 45°
*
3-11
Pillow block
UCP 300
Heavy duty
Set-screw locking
Insert UC 300
UCP 305 25 45 175 132 45 17 20 15 85 38 15 M14 1.4
UCP 306 30 50 180 140 50 17 20 18 95 43 17 M14 1.8
UCP 307 35 56 210 160 56 17 25 20 106 48 19 M14 2.8
UCP 308 40 60 220 170 60 17 27 22 116 52 19 M14 3.0
UCP 309 45 67 245 190 67 20 30 24 129 57 22 M16 4.1
UCP 310 50 75 275 212 75 20 35 27 143 61 22 M16 5.8
UCP 311 55 80 310 236 80 20 38 30 154 66 25 M16 7.4
UCP 312 60 85 330 250 85 25 38 32 165 71 26 M20 9.4
UCP 313 65 90 340 260 90 25 38 33 176 75 30 M20 10.0
UCP 314 70 95 360 280 90 27 40 35 187 78 33 M22 12.0
UCP 315 75 100 380 290 100 27 40 35 198 82 32 M22 14.0
UCP 316 80 106 400 300 110 27 40 40 210 86 34 M22 18.0
UCP 317 85 112 420 320 110 33 45 40 220 96 40 M27 20.0
UCP 318 90 118 430 330 110 33 45 45 235 96 40 M27 24.0
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg *
Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
*) grease nipple 45°
Pe r fec t qua l i t y and dynamic
Bearing units
3-12
Pillow block
UCPH 200
Normal duty
Set-screw locking
Insert UC 200
UCPH 201 12 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.81
UCPH 202 15 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.80
UCPH 203 17 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.79
UCPH 204 20 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.77
UCPH 205 25 80 140 105 50 13 19 16 114 34.1 14.3 M10 1.01
UCPH 206 30 90 161 121 50 17 21 17 130 38.1 15.9 M14 1.47
UCPH 207 35 95 166 127 60 17 21 18 140 42.9 17.5 M14 1.91
UCPH 208 40 100 178 137 70 17 21 19 150 49.2 19.0 M14 2.52
UCPH 209 45 105 189 146 70 17 21 20 158 49.2 19.0 M14 2.72
UCPH 210 50 110 205 159 70 20 23 21 165 51.6 19.0 M16 3.10
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg Pillow block
UCPA 200
Normal duty
Set-screw locking
Insert UC 200
UCPA 201 12 30.2 76 52 40 15 11 62 31.0 12.7 M10 0.60
UCPA 202 15 30.2 76 52 40 15 11 62 31.0 12.7 M10 0.59
UCPA 203 17 30.2 76 52 40 15 11 62 31.0 12.7 M10 0.58
UCPA 204 20 30.2 76 52 40 15 11 62 31.0 12.7 M10 0.56
UCPA 205 25 36.5 84 56 38 15 12 72 34.1 14.3 M10 0.83
UCPA 206 30 42.9 94 66 50 18 12 84 38.1 15.9 M14 1.12
UCPA 207 35 47.6 110 80 55 20 13 95 42.9 17.5 M14 1.48
UCPA 208 40 49.2 116 84 58 20 13 100 49.2 19.0 M14 1.89
UCPA 209 45 54.2 120 90 60 25 13 108 49.2 19.0 M14 1.98
UCPA 210 50 57.2 130 94 64 25 14 116 51.6 19.0 M16 2.16
Designation Shaft
diameter
mm h mm a mm e mm b mm r mm g mm w mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
3-13
Pillow block
UCPW 200
Normal duty
Set-screw locking
Insert UC 200
UCPW 204 20 33.3 65 50.8 32 15 14.5 64 31.0 12.7 M 8 0.46
UCPW 205 25 36.5 70 50.8 36 15 13.0 70 34.1 14.3 M10 0.67
UCPW 206 30 42.9 98 76.2 38 18 16.0 82 38.1 15.9 M10 1.12
UCPW 207 35 47.6 103 82.6 45 20 19.0 93 42.9 17.5 M10 1.38
UCPW 208 40 49.2 116 88.9 48 20 19.0 99 49.2 19.0 M12 1.86
UCPW 209 45 53.9 120 95.3 48 25 19.0 107 49.2 19.0 M12 1.92
UCPW 210 50 57.2 135 101.6 54 25 22.0 115 51.6 19.0 M16 2.24
Designation Shaft
diameter
mm h mm a mm e mm b mm g mm l mm w mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Bearing units
3-14
CAST IRON version square flange units
Square flange
UCF 200
Normal duty
Set-screw locking
Insert UC 200
UCF 201 12 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.60
UCF 202 15 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.59
UCF 203 17 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.58
UCF 204 20 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.56
UCF 205 25 95 70 16 14 27.0 12 35.8 34.1 14.3 M10 0.80
UCF 206 30 108 83 18 14 31.0 12 40.2 38.1 15.9 M10 1.12
UCF 207 35 117 92 19 16 34.0 14 44.4 42.9 17.5 M12 1.46
UCF 208 40 130 102 21 16 36.0 16 51.2 49.2 19.0 M14 1.84
UCF 209 45 137 105 22 18 38.0 16 52.2 49.2 19.0 M14 2.15
UCF 210 50 143 111 22 18 40.0 16 54.6 51.6 19.0 M14 2.42
UCF 211 55 162 130 25 20 43.0 19 58.4 55.6 22.2 M16 3.31
UCF 212 60 175 143 29 20 48.0 19 68.7 65.1 25.4 M16 4.28
UCF 213 65 187 149 30 22 50.0 19 69.7 65.1 25.4 M16 4.99
UCF 214 70 193 152 31 22 54.0 19 75.4 74.6 30.2 M16 5.85
UCF 215 75 200 159 34 22 56.0 19 78.5 77.8 33.3 M16 6.91
UCF 216 80 208 165 34 22 58.0 23 83.3 82.6 33.3 M20 7.50
UCF 217 85 220 175 36 24 63.0 23 87.6 85.7 34.1 M20 9.66
UCF 218 90 235 187 40 24 68.0 23 96.3 96.0 39.7 M20 12.06
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
3-15
Square flange
UCF 300
Heavy duty
Set-screw locking
Insert UC 300
UCF 305 25 110 80 16 13 29 16 39 38 15 M14 1.1
UCF 306 30 125 95 18 15 32 16 44 43 17 M14 1.6
UCF 307 35 135 100 20 16 36 19 49 48 19 M16 2.0
UCF 308 40 150 112 23 17 40 19 56 52 19 M16 2.7
UCF 309 45 160 125 25 18 44 19 60 57 22 M16 3.4
UCF 310 50 175 132 28 19 48 23 67 61 22 M20 4.5
UCF 311 55 185 140 30 20 52 23 71 66 25 M20 5.5
UCF 312 60 195 150 33 22 56 23 78 71 26 M20 6.5
UCF 313 65 208 166 33 22 58 23 78 75 30 M20 7.9
UCF 314 70 226 178 36 25 61 25 81 78 33 M22 9.5
UCF 315 75 236 184 39 25 66 25 89 82 32 M22 12.0
UCF 316 80 250 196 38 27 68 31 90 86 34 M27 14.0
UCF 317 85 260 204 44 27 74 31 100 96 40 M27 16.0
UCF 318 90 280 216 44 30 76 35 100 96 40 M30 19.0
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Bearing units
3-16
CAST IRON version two-bolt
flange units
Two-bolt flange
UCFL 200
Normal duty
Set-screw locking
Insert UC 200
UCFC 201 12 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.73
UCFC 202 15 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.72
UCFC 203 17 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.71
UCFC 204 20 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.69
UCFC 205 25 115 90 63.6 10 12 6 7 21.0 70 29.8 34.1 14.3 M10 1.00
UCFC 206 30 125 100 70.7 10 12 8 8 23.0 80 32.2 38.1 15.9 M10 1.30
UCFC 207 35 135 110 77.8 11 14 8 9 26.0 90 36.4 42.9 17.5 M12 1.81
UCFC 208 40 145 120 84.8 11 14 10 9 26.0 100 41.2 49.2 19.0 M12 2.14
UCFC 209 45 160 132 93.3 10 16 12 14 26.0 105 40.2 49.2 19.0 M14 2.68
UCFC 210 50 165 138 97.6 10 16 12 14 28.0 110 42.6 51.6 19.0 M14 2.90
UCFC 211 55 185 150 106.1 13 19 12 15 31.0 125 46.4 55.6 22.2 M16 4.01
UCFC 212 60 195 160 113.1 17 19 12 15 36.0 135 56.7 65.1 25.4 M16 4.94
UCFC 213 65 205 170 120.2 16 19 14 15 36.0 145 55.7 65.1 25.4 M16 5.65
UCFC 214 70 215 177 125.1 17 19 14 18 40.0 150 61.4 74.6 30.2 M16 6.95
UCFC 215 75 220 184 130.1 18 19 16 18 40.0 160 62.5 77.8 33.3 M16 7.56
UCFC 216 80 240 200 141.4 18 23 16 18 42.0 170 67.3 82.6 33.3 M20 9.15
UCFC 217 85 250 208 147.1 18 23 18 20 45.0 180 69.6 85.7 34.1 M20 10.81
UCFC 218 90 265 220 155.5 22 23 18 20 50.0 190 78.3 96.0 39.7 M20 12.96
Designation Shaft
diameter
mm a mm p mm e mm i mm s mm j mm k mm g mm f mm Z
mm Bi mm n max.
mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
3-17
Flange cartridge
UCFS 300
Heavy duty
Set-screw locking
Insert UC 300
UCFS 305 25 110 80 9 16 7 13 22 80 39 38 15 M14 1.3
UCFS 306 30 125 95 10 16 8 15 24 90 44 43 17 M14 1.9
UCFS 307 35 135 100 11 19 9 16 27 100 49 48 19 M16 2.4
UCFS 308 40 150 112 13 19 10 17 30 115 56 52 19 M16 3.3
UCFS 309 45 160 125 14 19 11 18 33 125 60 57 22 M16 4.0
UCFS 310 50 175 132 16 23 12 19 36 140 67 61 22 M20 5.3
UCFS 311 55 185 140 17 23 13 20 39 150 71 66 25 M20 6.2
UCFS 312 60 195 150 19 23 14 22 42 160 78 71 26 M20 7.2
UCFS 313 65 208 166 15 23 18 22 40 175 78 75 30 M20 8.9
UCFS 314 70 226 178 18 25 18 25 43 185 81 78 33 M22 11.0
UCFS 315 75 236 184 21 25 18 25 48 200 89 82 32 M22 13.0
UCFS 316 80 250 196 18 31 20 27 48 210 90 86 34 M27 15.0
UCFS 317 85 260 204 24 31 20 27 54 220 100 96 40 M27 17.0
UCFS 318 90 280 216 24 35 20 30 56 240 100 96 40 M30 21.0
Designation Shaft
diameter
mm a mm e mm i mm s mm j mm k mm g mm f mm Z
mm Bi mm n max.
mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Bearing units
3-18
CAST IRON version two-bolt flange units
Two-bolt flange
UCFL 200
Normal duty
Set-screw locking
Insert UC 200
UCFL 201 12 113 90 15 11 25.5 12 60 33.3 31.0 12.7 M10 0.45
UCFL 202 15 113 90 15 11 25.5 12 60 33.3 31.0 12.7 M10 0.44
UCFL 203 17 113 90 15 11 25.5 12 60 33.3 31.0 12.7 M10 0.43
UCFL 204 20 113 90 15 11 25.5 12 60 33.3 31.0 12.7 M10 0.41
UCFL 205 25 130 99 16 13 27.0 16 68 35.8 34.1 14.3 M14 0.58
UCFL 206 30 148 117 18 13 31.0 16 80 40.2 38.1 15.9 M14 0.86
UCFL 207 35 161 130 19 14 34.0 16 90 44.4 42.9 17.5 M14 1.08
UCFL 208 40 175 144 21 14 36.0 16 100 51.2 49.2 19.0 M14 1.44
UCFL 209 45 188 148 22 15 38.0 19 108 52.2 49.2 19.0 M16 1.74
UCFL 210 50 197 157 22 15 40.0 19 115 54.6 51.6 19.0 M16 2.10
UCFL 211 55 224 184 25 18 43.0 19 130 58.4 55.6 22.2 M16 2.91
UCFL 212 60 250 202 29 18 48.0 23 140 68.7 65.1 25.4 M20 3.74
UCFL 213 65 258 210 30 22 50.0 23 155 69.7 65.1 25.4 M20 4.57
UCFL 214 70 265 216 31 22 54.0 23 160 75.4 74.6 30.2 M20 5.11
UCFL 215 75 275 225 34 22 56.0 23 165 78.5 77.8 33.3 M20 5.37
UCFL 216 80 290 233 34 22 58.0 25 180 83.3 82.6 33.3 M22 7.20
UCFL 217 85 305 248 36 24 63.0 25 190 87.6 85.7 34.1 M22 8.61
UCFL 218 90 320 265 40 24 68.0 25 205 96.3 96.0 39.7 M22 10.51
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
3-19
CAST IRON version take-up units
Take-up
UCT 200
Normal duty
Set-screw locking
Insert UC 200
UCT 201 12 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.80
UCT 202 15 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.79
UCT 203 17 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.78
UCT 204 20 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.76
UCT 205 25 16 10 51 32 19 51 12 76 89 97 32 24 62 34.1 14.3 0.81
UCT 206 30 16 10 56 37 22 57 12 89 102 113 37 28 70 38.1 15.9 1.22
UCT 207 35 16 13 64 37 22 64 12 89 102 129 37 30 78 42.9 17.5 1.44
UCT 208 40 19 16 83 49 29 83 16 102 114 144 49 33 89 49.2 19.0 2.40
UCT 209 45 19 16 83 49 29 83 16 102 117 144 49 35 87 49.2 19.0 2.39
UCT 210 50 19 16 83 49 29 86 16 102 117 149 49 37 90 51.6 19.0 2.43
UCT 211 55 25 19 102 64 35 95 22 130 146 171 64 38 106 55.6 22.2 4.11
UCT 212 60 32 19 102 64 35 102 22 130 146 194 64 42 119 65.1 25.4 4.97
UCT 213 65 32 21 111 70 41 121 26 151 167 224 70 44 137 65.1 25.4 6.65
UCT 214 70 32 21 111 70 41 121 26 151 167 224 70 46 137 74.6 30.2 7.05
UCT 215 75 32 21 111 70 41 121 26 151 167 232 70 48 140 77.8 33.3 7.41
UCT 216 80 32 21 111 70 41 121 26 165 184 235 70 51 140 82.6 33.3 8.30
UCT 217 85 38 29 124 73 48 157 30 173 198 260 73 54 162 85.7 34.1 11.00
Designation Shaft
diameter
mm o mm g mm p mm q mm s mm b mm k mm e mm a mm w mm j mm l mm h mm Bi mm n mm Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Bearing units
3-20
Take-up
UCT 300
Heavy duty
Set-screw locking
Insert UC 300
UCT 305 25 16 14 62 36 26 65 12 80 89 122 36 26 76 38 15 1.4
UCT 306 30 18 16 70 41 28 74 16 90 100 137 41 28 85 43 17 1.8
UCT 307 35 20 17 75 45 30 80 16 100 111 150 45 32 94 48 19 2.4
UCT 308 40 22 19 83 50 32 89 18 112 124 162 50 34 100 52 19 3.0
UCT 309 45 24 20 90 55 34 97 18 125 138 178 55 38 110 57 22 4.0
UCT 310 50 27 22 98 61 37 106 20 140 151 192 61 40 118 61 22 5.0
UCT 311 55 29 23 105 66 39 115 22 150 163 207 66 44 127 66 25 6.4
UCT 312 60 31 25 113 71 41 123 22 160 178 220 71 46 135 71 26 7.6
UCT 313 65 32 27 116 70 43 134 26 170 190 238 80 50 146 75 30 9.7
UCT 314 70 36 27 130 85 46 140 26 180 202 252 90 52 155 78 33 11.0
UCT 315 75 36 27 132 85 46 150 26 192 216 262 90 55 160 82 32 14.0
UCT 316 80 42 30 150 98 53 160 30 204 230 282 102 60 174 86 34 16.0
UCT 317 85 42 32 152 98 53 170 32 214 240 298 102 64 183 96 40 20.0
UCT 318 90 46 32 160 106 57 175 32 228 255 312 110 66 192 96 40 22.0
Designation Shaft
diameter
mm o mm g mm p mm q mm s mm b mm k mm e mm a mm w mm j mm l mm h mm Bi mm n mm Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
3-21
CAST IRON version cartridge units
Cartridge
UCC 200
Normal duty
Set-screw locking
Insert UC 200
UCC 201 12 72 20 31.0 12.7 0.52
UCC 202 15 72 20 31.0 12.7 0.51
UCC 203 17 72 20 31.0 12.7 0.50
UCC 204 20 72 20 31.0 12.7 0.48
UCC 205 25 80 22 34.1 14.3 0.63
UCC 206 30 85 27 38.1 15.9 0.80
UCC 207 35 90 28 42.9 17.5 0.93
UCC 208 40 100 30 49.2 19.0 1.22
UCC 209 45 110 31 49.2 19.0 1.49
UCC 210 50 120 33 51.6 19.0 1.90
Designation Shaft
diameter
mm a mm l mm Bi mm n mm Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Bearing units
3-22
Square flange
MUCF 200
Set-screw locking
Insert MUC 200
MUCF 204 20 86 64 15 12.0 25.5 12 33.3 31.0 12.7 M10 0.71
MUCF 205 25 95 70 16 14.3 27.0 12 35.8 34.1 14.3 M10 0.92
MUCF 206 30 108 83 18 14.0 31.0 12 40.2 38.1 15.9 M14 1.36
MUCF 207 35 117 92 19 15.9 34.0 14 44.4 42.9 17.5 M14 1.77
MUCF 208 40 130 102 21 15.9 36.0 16 51.2 49.2 19.0 M14 2.46
MUCF 209 45 137 105 22 16.7 38.0 16 52.2 49.2 19.0 M14 2.77
MUCF 210 50 143 111 22 15.9 40.0 16 54.6 51.6 19.0 M16 3.18
STAINLESS STEEL version
Pillow block
MUCP 200
Set-screw locking
Insert MUC 200
MUCP 204 20 33.3 127 95 30 13 19 15.0 64 31.0 12.7 M10 0.79
MUCP 205 25 36.5 140 105 30 13 19 16.5 70 34.1 14.3 M10 0.98
MUCP 206 30 42.9 165 121 36 17 21 18.0 82 38.1 15.9 M12 1.53
MUCP 207 35 47.6 167 127 38 17 21 19.0 92 42.9 17.5 M12 1.92
MUCP 208 40 49.2 184 137 40 17 22 19.0 99 49.2 19.0 M12 2.33
MUCP 209 45 54.0 190 146 40 17 22 20.0 108 49.2 19.0 M12 2.67
MUCP 210 50 57.2 206 159 45 20 25 22.0 112 51.6 19.0 M16 3.31
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg 3-23
Take-up
MUCT 200
Set-screw locking
Insert MUC 200
MUCT 204 20 16 10 51 32 19 51 12 76 89 94 21 32 61 31.0 12.7 M10 0.83
MUCT 205 25 16 10 51 32 19 51 12 76 89 97 24 32 62 34.1 14.3 M10 0.89
MUCT 206 30 16 10 56 37 22 57 12 89 102 113 28 37 70 38.1 15.9 M14 1.32
MUCT 207 35 16 13 64 37 22 64 12 89 102 129 30 37 78 42.9 17.5 M14 1.77
MUCT 208 40 19 16 83 37 29 83 16 102 114 144 33 49 88 49.2 19.0 M14 2.58
MUCT 209 45 19 16 83 39 29 83 16 114 117 144 35 49 87 49.2 19.0 M14 2.66
MUCT 210 50 19 16 83 49 29 86 16 117 117 149 37 49 90 51.6 19.0 M16 2.77
Two-bolt flange
MUCFL 200
Set-screw locking
Insert MUC 200
MUCFL 204 20 113 90 15 11.5 27 10.5 60 33.3 31.0 12.7 M 8 0.51
MUCFL 205 25 130 99 16 13.0 28 12.5 68 35.7 34.1 14.3 M10 0.67
MUCFL 206 30 148 117 18 13.0 31 12.5 79 40.2 38.1 15.9 M10 0.97
MUCFL 207 35 161 130 19 14.3 34 14.0 90 44.4 42.9 17.5 M12 1.32
MUCFL 208 40 171 144 21 14.3 36 14.0 100 51.2 49.2 19.0 M12 1.81
MUCFL 209 45 179 148 22 15.0 38 16.0 108 52.2 49.2 19.0 M14 2.27
MUCFL 210 50 195 157 22 15.0 40 16.0 115 54.6 51.6 19.0 M14 2.58
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm Bi mm n mm Bolt size Weight
kg Designation Shaft
diameter
mm o mm g mm p mm q mm s mm b mm k mm e mm a mm w mm l mm j mm h mm Bi mm n mm Bolt size Weight
kg Pe r fec t qua l i t y and dynamic
Bearing units
3-24
Round flange with pressed steel housing
BPF 200
Light duty
Set-screw locking
Insert B 200
BPF 201 12 81 63.5 4.0 14 7.1 49 22 6.0 M 6 0.27
BPF 202 15 81 63.5 4.0 14 7.1 49 22 6.0 M 6 0.27
BPF 203 17 81 63.5 4.0 14 7.1 49 22 6.0 M 6 0.27
BPF 204 20 90 71.5 4.0 16 9.0 56 25 7.0 M 8 0.33
BPF 205 25 95 76.0 4.0 18 9.0 60 27 7.5 M 8 0.38
BPF 206 30 113 90.5 5.2 18 11.0 71 30 8.0 M10 0.62
BPF 207 35 122 100.0 5.2 20 11.0 81 32 8.5 M10 0.82
PRESSED STEEL version
Pillow block
with galvanized housing
BPP 200
Light duty
Set-screw locking
Insert B 200
BPP 201 12 22.2 86 68 25 9.5 3.2 43.8 22 6.0 M 8 0.16
BPP 202 15 22.2 86 68 25 9.5 3.2 43.8 22 6.0 M 8 0.16
BPP 203 17 22.2 86 68 25 9.5 3.2 43.8 22 6.0 M 8 0.16
BPP 204 20 25.4 98 76 32 9.5 3.2 50.5 25 7.0 M 8 0.23
BPP 205 25 28.6 108 86 32 11.5 4.0 56.5 27 7.5 M10 0.28
BPP 206 30 33.3 117 95 38 11.5 4.0 66.3 30 8.0 M10 0.47
BPP 207 35 39.7 129 106 42 11.5 4.6 78.0 32 8.5 M10 0.57
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm Bi mm n mm Bolt size Weight
kg Designation Shaft
diameter
mm a mm p mm t mm b mm s mm F
min.
mm Bi mm n mm Bolt size Weight
kg 3-25
Two-bolt flange
BPFL 200
Light duty
Set-screw locking
Insert B200
BPFL 201 12 81 63.5 4.0 14 7.1 59 49 22 6.0 M 6 0.19
BPFL 202 15 81 63.5 4.0 14 7.1 59 49 22 6.0 M 6 0.19
BPFL 203 17 81 63.5 4.0 14 7.1 59 49 22 6.0 M 6 0.19
BPFL 204 20 90 71.5 4.0 16 9.0 67 56 25 7.0 M 8 0.24
BPFL 205 25 95 76.0 5.2 18 9.0 71 60 27 7.5 M 8 0.28
BPFL 206 30 113 90.5 5.2 18 11.0 84 71 30 8.0 M10 0.38
Designation Shaft
diameter
mm a mm e mm t mm b mm s mm c mm F
min.
mm Bi mm n mm Bolt size Weight
kg Pe r fec t qua l i t y and dynamic
Bearing units
3-26
SILVER version
Pillow block
KP 000
Set-screw locking
Insert K 000
KP 000 10 18 67 53 16 7 6 35 14.0 4.0 M 6 0.07
KP 001 12 19 71 56 16 7 6 38 14.5 4.0 M 6 0.09
KP 002 15 22 80 63 16 7 7 43 16.5 4.5 M 6 0.13
KP 003 17 24 85 67 18 7 7 47 17.5 5.0 M 6 0.16
KP 004 20 28 100 80 20 10 9 55 21.0 6.0 M 8 0.23
KP 005 25 32 112 90 20 10 10 62 22.5 6.0 M 8 0.29
KP 006 30 36 132 106 26 13 11 70 24.5 6.5 M10 0.45
Two-bolt flange
KPL 000
Set-screw locking
Insert KP 000
KFL 000 10 60 45 5.5 5.5 11.5 7.0 36 15.5 14.0 4.0 M 6 0.06
KFL 001 12 63 48 5.5 5.5 11.5 7.0 38 16.0 14.5 4.0 M 6 0.07
KFL 002 15 67 53 6.5 6.5 13.0 7.0 42 18.6 16.5 4.5 M 6 0.10
KFL 003 17 71 56 7.0 7.0 14.0 7.0 46 19.5 17.5 5.0 M 6 0.13
KFL 004 20 90 71 8.0 8.0 16.0 10.0 55 23.0 21.0 6.0 M 8 0.20
KFL 005 25 95 75 8.0 8.0 16.0 10.0 60 24.5 22.5 6.0 M 8 0.25
KFL 006 30 112 85 9.0 9.0 18.0 13.0 70 27.0 24.5 6.5 M10 0.35
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm L
mm n mm Bolt size Weight
kg Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm L
mm n mm Bolt size Weight
kg 3-27
Pillow block
UP 000
Eccentric collar locking
Insert U 000+ER
UP 000 10 18 67 53 16 7.0 6 35 17.5 4.0 M 6 0.077
UP 001 12 19 71 56 16 7.0 6 38 17.5 4.0 M 6 0.091
UP 002 15 22 80 63 16 7.0 7 43 18.5 4.5 M 6 0.125
UP 003 17 24 85 67 18 7.0 7 47 20.5 5.0 M 6 0.156
UP 004 20 28 100 80 20 10.0 9 55 24.5 6.0 M 8 0.230
UP 005 25 32 112 90 20 10.0 10 62 25.5 6.0 M 8 0.294
UP 006 30 36 132 106 26 13.0 11 70 26.5 6.5 M10 0.454
Two-bolt-flange
UFL 000
Eccentric collar locking
Insert UK 000+ER
UFL 000 10 60 45 5.5 5.5 11.5 7.0 36 19.0 17.5 4.0 M 6 0.06
UF L001 12 63 48 5.5 5.5 11.5 7.0 38 19.0 17.5 4.0 M 6 0.07
UFL 002 15 67 53 6.5 6.5 13.0 7.0 42 20.5 18.5 4.5 M 6 0.10
UFL 003 17 71 56 7.0 7.0 14.0 7.0 46 22.5 20.5 5.0 M 6 0.13
UFL 004 20 90 71 8.0 8.0 16.0 10.0 55 26.5 24.5 6.0 M 8 0.20
UFL 005 25 95 75 8.0 8.0 16.0 10.0 60 27.5 25.5 6.0 M 8 0.24
UFL 006 30 112 85 9.0 9.0 18.0 13.0 70 29.0 26.5 6.5 M10 0.35
UFL 007 35 122 95 10.0 10.0 20.0 13.0 80 32.5 29.5 7.0 M10 0.50
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm L
mm n mm Bolt size Weight
kg Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm L
mm n mm Bolt size Weight
kg Pe r fec t qua l i t y and dynamic
Bearing units
3-28
STAINLESS SILVER version
Pillow block
MUP 000
Eccentric collar locking
Insert MU 000+ER
MUP 000 10 18 67 53 16 7 6 35 17.5 4.0 M 6 0.11
MUP 001 12 19 71 56 16 7 6 38 17.5 4.0 M 6 0.14
MUP 002 15 22 80 63 16 7 7 43 18.5 4.5 M 6 0.17
MUP 003 17 24 85 67 18 7 7 47 20.5 5.0 M 6 0.22
MUP 004 20 28 100 80 20 10 9 55 24.5 6.0 M 8 0.34
MUP 005 25 32 112 90 20 10 10 62 25.5 6.0 M 8 0.46
MUP 006 30 36 132 106 26 13 11 70 26.5 6.5 M10 0.66
Two-bolt-flange
MUFL 000
Eccentric collar locking
Insert MU 000+ER
MUFL 000 10 60 45 6.0 6.0 12 7 36 19.5 17.5 4.0 M 6 0.09
MUFL 001 12 63 48 6.0 6.0 12 7 38 19.5 17.5 4.0 M 6 0.11
MUFL 002 15 67 53 6.5 6.5 13 7 42 20.5 18.5 4.5 M 6 0.14
MUFL 003 17 71 56 7.0 7.0 14 7 46 22.5 20.5 5.0 M 6 0.18
MUFL 004 20 90 71 8.0 8.0 16 10 55 26.0 24.5 6.0 M 8 0.28
MUFL 005 25 95 75 8.0 8.0 16 10 60 27.5 25.5 6.0 M 8 0.35
MUFL 006 30 112 85 9.0 9.0 18 13 70 29.0 26.5 6.5 M10 0.40
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm L
mm n mm Bolt size Weight
kg Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm L
mm n mm Bolt size Weight
kg 3-29
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg PLASTIC version
Pillow block
PUCP 200
Set-screw locking
Insert MUC 200
PUCP 204 20 33.3 127.0 95 38 11 14 14.2 65.5 31.0 12.7 M10 0.29
PUCP 205 25 36.5 140.5 105 38 11 14 14.5 71.0 34.0 14.3 M10 0.34
PUCP 206 30 42.9 163.0 119 46 14 18 17.8 84.0 38.1 15.9 M10 0.54
PUCP 207 35 47.6 168.0 127 48 14 18 18.0 94.5 42.9 17.5 M12 0.78
PUCP 208 40 49.2 184.0 137 54 14 18 19.5 99.0 49.2 19.0 M12 0.97
PUCP 209 45 54.0 192.0 146 54 17 20 23.0 106.0 49.2 19.0 M16 1.09
PUCP 210 50 57.2 206.0 159 60 17 20 23.0 114.0 51.6 19.0 M16 1.20
Pillow block
PUCPA 200
Set-screw locking
Insert MUC 200
PUCPA 204 20 30.2 76 52 40 62 31.0 12.7 M8 0.55
PUCPA 205 25 36.5 84 56 38 72 34.1 14.3 M10 0.61
PUCPA 206 30 42.9 94 66 50 84 38.1 15.9 M10 0.89
PUCPA 207 35 47.6 110 80 55 95 42.9 17.5 M10 1.31
PUCPA 208 40 49.2 116 84 58 100 49.2 19.0 M12 1.56
Designation Shaft
diameter
mm h mm a mm e mm b mm w mm Bi mm n mm Bolt size Weight
kg Pe r fec t qua l i t y and dynamic
Bearing units
3-30
Two-bolt flange
PUCFL 200
Set-screw locking
Insert MUC 200
PUCFL 204 20 130.0 90.0 15.4 11.4 26.5 11 70.0 33.7 31.0 12.7 M10 0.24
PUCFL 205 25 131.0 99.0 17.0 13.5 29.1 11 69.5 36.7 34.0 14.3 M10 0.30
PUCFL 206 30 148.0 117.0 19.0 13.3 30.5 11 80.0 41.2 38.1 15.9 M10 0.45
PUCFL 207 35 164.0 130.0 18.0 16.1 32.8 13 90.0 43.4 42.9 17.5 M12 0.66
PUCFL 208 40 176.0 144.0 21.5 20.0 37.5 14 100.0 51.7 49.2 19.0 M12 0.87
PUCFL 209 45 188.5 148.5 24.0 21.0 41.0 17 108.0 54.2 49.2 19.0 M16 1.00
PUCFL 210 50 197.0 157.0 25.0 21.0 43.0 17 115.0 57.6 51.6 19.0 M16 1.20
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm Bi mm n mm Bolt size Weight
kg Square flange
PUCF 200
Set-screw locking
Insert MUC 200
PUCF 204 20 86 63.5 18.0 13.4 27.8 11 36.3 31.0 12.7 M10 0.29
PUCF 205 25 95 70.0 17.0 14.3 28.0 11 36.7 34.1 14.3 M10 0.36
PUCF 206 30 107 83.0 19.2 14.3 31.5 11 41.4 38.1 15.9 M10 0.50
PUCF 207 35 118 92.0 21.5 15.5 34.8 13 46.9 42.9 17.5 M12 0.74
PUCF 208 40 130 102.0 23.0 17.0 37.5 14 53.2 49.2 19.0 M12 0.97
PUCF 209 45 137 105.0 24.0 19.0 41.0 17 54.2 49.2 19.0 M16 1.10
PUCF 210 50 143 111.0 25.0 21.0 43.0 17 57.6 51.6 19.0 M16 1.25
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg 3-31
Take-up
PUCT 200
Set-screw locking
Insert MUC 200
PUCT 204 20 36 M16 47 12 76 88 99 27.5 64 31.0 12.7 0.35
PUCT 205 25 36 M16 47 12 76 88 99 27.5 64 34.1 14.3 0.40
PUCT 206 30 40 M16 63 12 89 102 125 34.5 76 38.1 15.9 0.55
PUCT 207 35 40 M16 63 12 89 102 125 34.5 76 42.9 17.5 0.80
PUCT 208 40 40 M16 80 16 102 114 140 34.5 85 49.2 19.0 0.95
Designation Shaft
diameter
mm p mm s mm b mm k mm e mm a mm w mm l mm h mm Bi mm n mm Weight
kg Pe r fec t qua l i t y and dynamic
Inserts P. 4-3
Cast iron version P. 4-11
Pillow blocks P. 4-11
Square flange units P. 4-14
Flange cartridge units P. 4-16
Two-bolt flange units P. 4-18
Take-up units P. 4-19
Cartridge units P. 4-21
Stainless steel version P. 4-22
Pressed steel version P. 4-24
Silver version P. 4-26
Stainless silver version P. 4-28
Plastic version P. 4-29
Bearing units
Cast iron version
Stainless steel
version
Pressed steel
version
Silver version
Stainless silver
version
Plastic version
Cast iron version
Stainless steel
version
Plastic version
Cast iron version Cast iron version
Cast iron version
Stainless steel version
Cast iron version
Stainless steel
version
Pressed steel
version
Silver version
Stainless silver
version
Plastic version
Pressed steel
version
A
S
A
H
I
B
e a ri n g u n it s Pe r fec t qua l i t y and dynamic
4-2
Bearing units
Selection of shaft
For the units with cylindrical bore (with set-screws or eccentric
locking collar) clearance fit is usually favoured for mounting
the units on the shaft.
set-screw tightening torque for inserts Nm
UC 201 - 206
UC 207 - 209
UC 210 - 212
UC 213 - 218
UC 305 - 306
UC 307
UC 308 - 309
UC 310 - 314
UC 315 - 316
UC 317 - 318
MUC 204 - 206
MUC 207 - 209
MUC 210
3.80
8.30
16.00
25.00
30.00
58.00
set-screw tightening torque for inserts Nm
KH 201 - 205
KH 206 - 210
B 201 - 204
B 205 - 206
B 207
K 000 - 001
K 002 - 003
K 004 - 006
0.55
1.45
2.50
3.90
8.50
11.00
Regreasing intervals
The usable life of the grease is influenced by many factors.
The regreasing intervals in our table thus can only be seen as
very rough estimates.
Experience with comparable bearings or ones already
used is therefore very important as not all operating
conditions and influential factors that affect the service
life of a lubricant – and hence also the bearing – are
known or determinable in many cases.
°C Clean Dirty
Very dirty
heavily humid
50 3 years 6 months 3 months
70 1 year 2 months 1 month
100 3 months 2 weeks 1 week
Greasing interval
Environmental condition
Operating
temperature
of bearing
Greasing interval
4-3
INSERTS
Ball bearing
UC 200
Normal duty
Set-screw locking
Designation d D Bi Be r n m G ds T W Load rating Weight
mm mm mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
UC 201 12 47 31.0 17 1.0 12.7 18.3 4.5 M 6 x 0.75 4.5 29.0 13.1 6.3 0.21
UC 202 15 47 31.0 17 1.0 12.7 18.3 4.5 M 6 x 0.75 4.5 29.0 13.1 6.3 0.19
UC 203 17 47 31.0 17 1.0 12.7 18.3 4.5 M 6 x 0.75 4.5 29.0 13.1 6.3 0.18
UC 204 20 47 31.0 17 1.5 12.7 18.3 4.5 M 6 x 0.75 4.5 29.0 13.1 6.3 0.16
UC 205 25 52 34.0 17 1.5 14.3 19.7 5.0 M 6 x 0.75 4.5 34.0 14.3 7.1 0.19
UC 206 30 62 38.1 19 1.5 15.9 22.2 5.0 M 6 x 0.75 5.1 40.5 20.0 10.2 0.31
UC 207 35 72 42.9 20 2.0 17.5 25.4 6.0 M 8 x 1.00 5.8 48.0 26.4 14.0 0.48
UC 208 40 80 49.2 21 2.0 19.0 30.2 8.0 M 8 x 1.00 6.2 53.0 29.9 16.0 0.62
UC 209 45 85 49.2 22 2.0 19.0 30.2 8.0 M 8 x 1.00 6.5 57.3 33.5 18.1 0.67
UC 210 50 90 51.6 23 2.0 19.0 32.6 9.0 M10 x 1.25 6.5 63.0 36.0 20.1 0.78
UC 211 55 100 55.6 24 2.5 22.2 33.4 9.0 M10 x 1.25 7.3 70.0 44.0 25.5 1.03
UC 212 60 110 65.1 26 2.5 25.4 39.7 10.0 M10 x 1.25 7.7 77.0 53.5 31.5 1.45
UC 213 65 120 65.1 27 2.5 25.4 39.7 10.0 M10 x 1.25 8.3 82.1 58.5 35.0 1.71
UC 214 70 125 74.6 29 2.5 30.2 44.4 12.0 M12 x 1.50 8.7 87.0 63.5 38.0 2.06
UC 215 75 130 77.8 30 2.5 33.3 44.5 12.0 M12 x 1.50 9.2 91.5 67.5 42.0 2.22
UC 216 80 140 82.6 32 3.0 33.3 49.3 12.0 M12 x 1.50 9.6 98.5 74.0 45.5 2.82
UC 217 85 150 85.7 34 3.0 34.1 51.6 12.0 M12 x 1.50 10.5 105.0 85.0 55.0 3.38
UC 218 90 160 96.0 36 3.0 39.7 56.3 12.0 M12 x 1.50 11.1 111.5 97.5 63.0 4.34
Pe r fec t qua l i t y and dynamic
4-4
Gehäuseeinheiten
Ball bearing
UC 300
Heavy duty
Set-screw locking
UC 305 25 62 38 21 2.0 15 23 6 M 6 x 0.75 6.1 36.9 21.7 10.9 0.44
UC 306 30 72 43 23 2.0 17 26 6 M 6 x 0.75 6.7 45.0 27.3 14.2 0.56
UC 307 35 80 48 25 2.5 19 29 8 M 8 x 1.00 7.4 50.5 34.0 18.2 0.71
UC 308 40 90 52 27 2.5 19 33 10 M10 x 1.25 8.2 56.0 41.5 22.7 1.00
UC 309 45 100 57 30 2.5 22 35 10 M10 x 1.25 9.0 63.0 52.5 30.5 1.28
UC 310 50 110 61 32 3.0 22 39 12 M12 x 1.5 10.0 70.5 63.0 36.5 1.65
UC 311 55 120 66 34 3.0 25 41 12 M12 x 1.5 10.7 76.5 73.0 42.5 2.07
UC 312 60 130 71 36 3.5 26 45 12 M12 x 1.5 11.5 82.5 83.0 49.0 2.59
UC 313 65 140 75 38 3.5 30 45 12 M12 x 1.5 12.2 88.5 94.5 56.5 3.15
UC 314 70 150 78 40 3.5 33 45 12 M12 x 1.5 13.0 95.2 106.0 64.5 3.83
UC 315 75 160 82 42 3.5 32 50 14 M14 x 1.5 13.8 101.5 116.0 72.0 4.59
UC 316 80 170 86 44 3.5 34 52 14 M14 x 1.5 14.5 108.0 125.0 81.5 5.40
UC 317 85 180 96 46 4.0 40 56 16 M16 x 1.5 15.0 114.5 135.0 91.0 6.58
UC 318 90 190 96 48 4.0 40 56 16 M16 x 1.5 15.9 121.0 146.0 101.0 7.34
UC 319 95 200 103 50 4.0 41 62 16 M16 x 1.5 16.7 127.5 156.0 111.0 8.70
UC 320 100 215 108 54 4.0 42 66 18 M18 x 1.5 18.0 135.5 177.0 133.0 10.80
UC 322 110 240 117 60 4.0 46 71 18 M18 x 1.5 21.0 152.0 209.0 170.0 14.30
UC 324 120 260 126 64 4.0 51 75 18 M18 x 1.5 22.0 165.0 211.0 170.0 18.50
UC 326 130 280 135 68 5.0 54 81 20 M20 x 1.5 23.0 178.0 234.0 196.0 23.00
UC 328 140 300 145 73 5.0 59 86 20 M20 x 1.5 25.0 191.5 260.0 224.0 28.50
Designation d D Bi Be r n m G ds T W Load rating Weight
mm mm mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
4-5
Ball bearing
UK 200+H
Normal duty
Adapter sleeve locking
UK 205+H2305 20 52 35 25 23 17 4.5 8 38 14.3 7.1 0.24
UK 206+H2306 25 62 38 30 26 19 5.1 8 45 20.0 10.2 0.40
UK 207+H2307 30 72 43 35 27 20 5.8 9 52 26.4 14.0 0.53
UK 208+H2308 35 80 46 40 29 21 6.2 10 58 29.9 16.0 0.69
UK 209+H2309 40 85 50 45 30 22 6.5 11 65 33.5 18.1 0.77
UK 210+H2310 45 90 55 50 31 23 6.5 12 70 36.0 20.1 0.93
UK 211+H2311 50 100 59 55 33 24 7.3 12 75 44.0 25.5 1.16
UK 212+H2312 55 110 62 60 36 26 7.7 13 80 53.5 31.5 1.47
UK 213+H2313 60 120 65 65 38 27 8.3 14 85 58.5 35.0 1.82
UK 215+H2315 65 130 73 75 41 30 9.2 15 98 67.5 42.0 2.59
UK 216+H2316 70 140 78 80 44 32 9.6 17 105 74.0 45.5 3.27
UK 217+H2317 75 150 82 85 46 34 10.5 18 110 85.0 55.0 3.92
UK 218+H2318 80 160 86 90 49 36 11.1 18 120 97.5 63.0 4.68
Designation d D L d1 Bi Be T Y W Load rating Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
Pe r fec t qua l i t y and dynamic
taper
Ball bearing
UK 300+H
Heavy duty
Adapter sleeve locking
UK 305+H2305 20 62 35 25 26 21 6.1 8 38 21.7 10.9 0.48
UK 306+H2306 25 72 38 30 29 23 6.7 8 45 27.3 14.2 0.59
UK 307+H2307 30 80 43 35 31 25 7.4 9 52 34.0 18.2 0.74
UK 308+H2308 35 90 46 40 34 27 8.2 10 58 41.5 22.7 1.01
UK 309+H2309 40 100 50 45 37 30 9.0 11 65 52.2 30.5 1.31
UK 310+H2310 45 110 55 50 40 32 10.0 12 70 63.0 36.5 1.68
UK 311+H2311 50 120 59 55 43 34 10.7 12 75 73.0 42.5 2.06
UK 312+H2312 55 130 62 60 46 36 11.5 13 80 83.0 49.0 2.53
UK 313+H2313 60 140 65 65 48 38 12.2 14 85 94.5 56.5 3.07
UK 315+H2315 65 160 73 75 54 42 13.8 15 98 116.0 72.0 4.74
UK 316+H2316 70 170 78 80 57 44 14.5 17 105 125.0 81.5 5.62
UK 317+H2317 75 180 82 85 60 46 15.0 18 110 135.0 91.0 6.56
UK 318+H2318 80 190 86 90 63 48 15.9 18 120 146.0 101.0 7.52
UK 319+H2319 85 200 90 95 66 50 16.7 19 125 156.0 111.0 8.72
UK 320+H2320 90 215 97 100 72 54 18.0 20 130 177.0 133.0 10.80
UK 322+H2322 100 240 105 110 80 60 21.0 21 145 209.0 170.0 14.40
UK 324+H2324 110 260 112 120 86 64 22.0 22 155 211.0 170.0 18.00
UK 326+H2326 115 280 121 130 92 68 23.0 23 165 234.0 196.0 23.30
UK 328+H2328 125 300 131 140 98 73 25.0 24 180 260.0 224.0 28.80
4-6
Bearing units
Designation d D L d1 Bi Be T Y W Load rating Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
taper
4-7
Ball bearing
B 200
Light duty
Set-screw locking
B 201 12 40 22.0 12 1.0 6.0 16.0 4.0 M5 x 0.80 24.7 9.75 4.55 0.10
B 202 15 40 22.0 12 1.0 6.0 16.0 4.0 M5 x 0.80 24.7 9.75 4.55 0.09
B 203 17 40 22.0 12 1.0 6.0 16.0 4.0 M5 x 0.80 24.7 9.75 4.55 0.07
B 204 20 47 24.7 14 1.5 7.0 17.7 4.5 M5 x 0.80 29.0 13.10 6.30 0.12
B 205 25 52 27.7 15 1.5 7.5 20.2 5.0 M6 x 0.75 34.0 14.30 7.10 0.16
B 206 30 62 30.3 16 1.5 8.0 22.3 5.0 M6 x 0.75 40.5 20.00 10.20 0.25
B 207 35 72 32.9 17 2.0 8.5 24.4 6.0 M8 x 1.00 48.0 26.40 14.00 0.38
Ball bearing
KH 200+ER
Light duty
Spherical outer ring
Eccentric collar locking
KH 201+ER 12 40 28.6 19.1 12 1.0 3.6 6.5 28.6 13.5 M 6 x 0.75 9.75 4.60 0.12
KH 202+ER 15 40 28.6 19.1 12 1.0 3.6 6.5 28.6 13.5 M 6 x 0.75 9.75 4.60 0.11
KH 203+ER 17 40 28.6 19.1 12 1.0 3.6 6.5 28.6 13.5 M 6 x 0.75 9.75 4.60 0.10
KH 204+ER 20 47 31.0 21.5 14 1.5 4.1 7.5 33.3 13.5 M 6 x 0.75 13.10 6.35 0.16
KH 205+ER 25 52 31.0 21.5 15 1.5 4.1 7.5 38.1 13.5 M 6 x 0.75 14.30 7.30 0.20
KH 206+ER 30 62 35.7 23.8 16 1.5 4.9 9.0 44.5 15.9 M 8 x 1.00 20.00 10.50 0.31
KH 207+ER 35 72 38.9 25.4 17 2.0 5.4 9.5 55.6 17.5 M10 x 1.25 26.40 14.30 0.49
KH 208+ER 40 80 43.7 30.2 18 2.0 5.9 11.0 60.3 18.3 M10 x 1.25 29.90 16.50 0.62
KH 209+ER 45 85 43.7 30.2 19 2.0 6.2 11.0 63.5 18.3 M10 x 1.25 33.50 18.90 0.65
KH 210+ER 50 90 43.7 30.2 20 2.0 6.5 11.0 69.9 18.3 M10 x 1.25 36.00 21.10 0.95
KH 211+ER 55 100 48.4 32.5 21 2.5 7.0 12.0 76.2 20.7 M12 x 1.50 44.00 26.70 0.94
Designation d D Bi Be r n m G ds W Load rating Weight
mm mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
Designation d D L Bi Be r T n W K ds Load rating Weight
mm mm mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
Pe r fec t qua l i t y and dynamic
spherical o.d.
Ball bearing
MUC 200
Normal duty in stainless steel
Set-screw locking
MUC 204 20 47 31.0 17 1.5 12.7 18.3 4.5 M 6x1 4.5 29.0 10900 5300 0.16
MUC 205 25 52 34.1 17 1.5 14.3 19.8 5.0 M 6x1 4.5 34.0 11900 6300 0.19
MUC 206 30 62 38.1 19 1.5 15.9 22.2 5.0 M 6x1 5.1 40.5 16700 9050 0.31
MUC 207 35 72 42.9 20 2.0 17.5 25.4 6.0 M 8x1 5.8 48.0 22000 12300 0.48
MUC 208 40 80 49.2 21 2.0 19.0 30.2 8.0 M 8x1 6.2 53.0 24900 14300 0.62
MUC 209 45 85 49.2 22 2.0 19.0 30.2 8.0 M 8x1 6.5 57.3 28100 16400 0.67
MUC 210 50 90 51.6 23 2.0 19.0 32.6 9.0 M10x1.25 6.5 63.0 30200 18600 0.78
Ball bearing
KHR 200+ER
Light duty
Cylindrical outer ring
Eccentric collar locking
KHR 201AE 12 40 28.6 19.1 12 1.0 3.6 6.5 28.6 13.5 M 6 x 0.75 9.75 4.60 0.12
KHR 202AE 15 40 28.6 19.1 12 1.0 3.6 6.5 28.6 13.5 M 6 x 0.75 9.75 4.60 0.11
KHR 203AE 17 40 28.6 19.1 12 1.0 3.6 6.5 28.6 13.5 M 6 x 0.75 9.75 4.60 0.10
KHR 204AE 20 47 31.0 21.5 14 1.5 4.1 7.5 33.3 13.5 M 6 x 0.75 13.10 6.35 0.16
KHR 205AE 25 52 31.0 21.5 15 1.5 4.1 7.5 38.1 13.5 M 6 x 0.75 14.30 7.30 0.20
KHR 206AE 30 62 35.7 23.8 16 1.5 4.9 9.0 44.5 15.9 M 8 x 1 20.00 10.50 0.31
KHR 207AE 35 72 38.9 25.4 17 2.0 5.4 9.5 55.6 17.5 M10 x 1.25 26.40 14.30 0.49
KHR 208AE 40 80 43.7 30.2 18 2.0 5.9 11.0 60.3 18.3 M10 x 1.25 29.90 16.50 0.62
KHR 209BE 45 85 43.7 30.2 19 2.0 6.2 11.0 63.5 18.3 M10 x 1.25 33.50 18.90 0.65
KHR 210BE 50 90 43.7 30.2 20 2.0 6.5 11.0 69.9 18.3 M10 x 1.25 36.00 21.10 0.95
KHR 211BE 55 100 48.4 32.5 21 2.5 7.0 12.0 76.2 20.7 M12 x 1.5 44.00 26.70 0.94
4-8
Bearing units
Designation d D L Bi Be r T n W K ds Load rating Weight
mm mm mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
Designation d D Bi Be r n m G ds T W Load rating Weight
mm mm mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
cylindrical o.d.
4-9
Ball bearing
K 000
Normal version for silver-series
Set-screw locking
K000 10 26 14.0 8 0.5 4.0 3.0 14.75 4.70 2.00 0.05
K001 12 28 14.5 8 0.5 4.0 3.0 17.35 5.20 2.45 0.06
K002 15 32 16.5 9 0.5 4.5 3.5 20.02 5.70 2.90 0.10
K003 17 35 17.5 10 0.5 5.0 3.5 23.10 6.10 3.35 0.11
K004 20 42 21.0 12 1.0 6.0 4.0 27.00 9.55 5.15 0.19
K005 25 47 22.5 12 1.0 6.0 4.5 31.70 10.30 5.95 0.22
K006 30 55 24.5 13 1.5 6.5 5.0 38.00 13.50 8.45 0.32
Ball bearing
U 000+ER
Special version for silver series
Eccentric collar locking
U000+ER 10 26 17.5 11.0 8 0.5 4.0 8.5 17 4.6 1.98 0.030
U001+ER 12 28 17.5 11.0 8 0.5 4.0 8.5 19 5.1 2.27 0.036
U002+ER 15 32 18.5 12.0 9 0.5 4.5 8.5 22 5.6 2.55 0.050
U003+ER 17 35 20.5 13.5 10 0.5 5.0 9.5 25 6.0 2.84 0.062
U004+ER 20 42 24.5 16.5 12 1.0 6.0 11.0 30 9.35 4.55 0.104
U005+ER 25 47 25.5 17.5 12 1.0 6.0 12.0 36 10.1 5.05 0.133
U006+ER 30 55 26.5 18.5 13 1.5 6.5 12.0 42 13.2 7.00 0.186
Designation d D Bi Be r n G W Load ratings Weight
mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
Designation d D L Bi Be r n k W Load ratings Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
Pe r fec t qua l i t y and dynamic
Ball bearing
MU 000+ER
Special version for silver-stainless-steel-series made of stainless
steel
Eccentric collar locking
MU000+ER 10 26 17.5 11.0 8 0.5 4.0 8.5 17 4.00 1.60 0.030
MU001+ER 12 28 17.5 11.0 8 0.5 4.0 8.5 19 4.40 1.95 0.036
MU002+ER 15 32 18.5 12.0 9 0.5 4.5 8.5 22 4.85 2.30 0.050
MU003+ER 17 35 20.5 13.5 10 0.5 5.0 9.5 25 5.20 2.70 0.062
MU004+ER 20 42 24.5 16.5 12 1.0 6.0 11.0 30 8.10 4.10 0.104
MU005+ER 25 47 25.5 17.5 12 1.0 6.0 12.0 36 8.75 4.75 0.133
MU006+ER 30 55 26.5 18.5 13 1.5 6.5 12.0 42 11.50 6.75 0.186
4-10
Bearing units
Designation d D L Bi Be r n k W Load ratings Weight
mm mm mm mm mm mm mm mm mm
dynamic C
kN static C0
kN kg
4-11
CAST IRON version pillow blocks
Pillow block
UCP 200
Normal duty
Set-screw locking
Ball bearing UC 200
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg UCP 201 12 30.2 127 95 38 13 19 15 62 31.0 12.7 M10 0.65
UCP 202 15 30.2 127 95 38 13 19 15 62 31.0 12.7 M10 0.63
UCP 203 17 30.2 127 95 38 13 19 15 62 31.0 12.7 M10 0.62
UCP 204 20 33.3 127 95 38 13 19 15 65 31.0 12.7 M10 0.65
UCP 205 25 36.5 140 105 38 13 16 16 70 34.0 14.3 M10 0.79
UCP 206 30 42.9 165 121 48 17 21 18 83 38.1 15.9 M14 1.30
UCP 207 35 47.6 167 127 48 17 21 19 94 42.9 17.5 M14 1.60
UCP 208 40 49.2 184 137 54 17 25 19 100 49.2 19.0 M14 2.00
UCP 209 45 54.0 190 146 54 17 22 20 108 49.2 19.0 M14 2.30
UCP 210 50 57.2 206 159 60 20 25 22 114 51.6 19.0 M16 2.70
UCP 211 55 63.5 219 171 60 20 25 22 126 55.6 22.2 M16 3.30
UCP 212 60 69.8 241 184 70 20 25 25 138 65.1 25.4 M16 4.70
UCP 213 65 76.2 265 203 70 25 29 27 150 65.1 25.4 M20 5.60
UCP 214 70 79.4 266 210 72 25 31 27 156 74.6 30.2 M20 7.30
UCP 215 75 82.6 275 217 74 25 31 28 163 77.8 33.3 M20 7.90
UCP 216 80 88.9 292 232 78 25 31 30 175 82.6 33.3 M20 10.00
UCP 217 85 95.2 310 247 83 25 31 32 187 85.7 34.1 M20 12.20
UCP 218 90 101.6 327 262 88 27 33 34 200 96.0 39.7 M22 14.70
Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
4-12
Bearing units
Pillow block
UCP 300
Heavy duty
Set-screw locking
Ball bearing UC 300
UCP 305 25 45 175 132 45 17 20 16 83 38 15 M14 1.6
UCP 306 30 50 180 140 50 17 20 19 94 43 17 M14 1.9
UCP 307 35 56 210 160 56 17 25 21 105 48 19 M14 2.7
UCP 308 40 60 220 170 60 17 27 23 116 52 19 M14 3.3
UCP 309 45 67 245 190 67 20 30 25 128 57 22 M16 4.5
UCP 310 50 75 275 212 75 20 35 28 143 61 22 M16 6.2
UCP 311 55 80 310 236 80 20 38 31 154 66 25 M16 7.7
UCP 312 60 85 330 250 85 25 38 33 165 71 26 M20 9.3
UCP 313 65 90 340 260 90 25 38 36 174 75 30 M20 9.8
UCP 314 70 95 360 280 90 27 40 40 186 78 33 M22 11.4
UCP 315 75 100 380 290 100 27 40 40 167 82 32 M22 13.6
UCP 316 80 106 400 300 110 27 40 45 209 86 34 M22 16.4
UCP 317 85 112 420 320 110 33 45 45 221 96 40 M27 18.6
UCP 318 90 118 430 330 110 33 45 50 233 96 40 M27 20.9
UCP 319 95 125 470 360 120 36 50 50 250 103 41 M30 26.5
UCP 320 100 140 490 380 120 36 50 55 275 108 42 M30 34.3
UCP 322 110 150 520 400 140 40 55 60 295 117 46 M33 42.5
UCP 324 120 160 570 450 140 40 55 70 321 126 51 M33 53.5
UCP 326 130 180 600 480 140 40 55 80 354 135 54 M33 72.1
UCP 328 140 200 620 500 140 40 55 80 388 145 59 M33 89.1
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
4-13
Pillow block
UCPA 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCPA 201 12 30.2 76 52 38 12 8 62 31.0 12.7 M10 0.65
UCPA 202 15 30.2 76 52 38 12 8 62 31.0 12.7 M10 0.63
UCPA 203 17 30.2 76 52 38 12 8 62 31.0 12.7 M10 0.62
UCPA 204 20 30.2 76 52 38 12 8 62 31.0 12.7 M10 0.60
UCPA 205 25 36.5 84 56 38 15 10 72 34.0 14.3 M10 0.81
UCPA 206 30 42.9 94 66 48 18 10 84 38.1 15.9 M14 1.20
UCPA 207 35 47.6 110 80 48 20 12 95 42.9 17.5 M14 1.70
UCPA 208 40 49.2 116 84 54 20 12 100 49.2 19.0 M14 1.90
UCPA 209 45 54.2 120 90 54 25 12 108 49.2 19.0 M14 2.20
UCPA 210 50 57.2 130 94 60 25 14 116 51.6 19.0 M16 2.60
Designation Shaft
diameter
mm h mm a mm e mm b mm r mm g mm w mm Bi mm n mm Bolt size Weight
kg Pillow block
UCPH 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCPH 201 12 70 127 95 40 13 19 15 101 31.0 12.7 M10 1.00
UCPH 202 15 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.99
UCPH 203 17 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.98
UCPH 204 20 70 127 95 40 13 19 15 101 31.0 12.7 M10 0.96
UCPH 205 25 80 140 105 50 13 19 16 114 34.0 14.3 M10 1.20
UCPH 206 30 90 165 121 50 17 21 18 130 38.1 15.9 M14 1.90
UCPH 207 35 95 167 127 60 17 21 19 140 42.9 17.5 M14 2.40
UCPH 208 40 100 184 137 70 17 25 19 149 49.2 19.0 M14 2.80
UCPH 209 45 105 190 146 70 17 25 20 157 49.2 19.0 M14 3.20
UCPH 210 50 110 206 159 70 20 25 22 165 51.6 19.0 M16 3.60
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
4-14
Bearing units
CAST IRON version square flange units
Square flange
UCF 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCF 201 12 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.64
UCF 202 15 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.62
UCF 203 17 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.61
UCF 204 20 86 64 15 12 25.5 12 33.3 31.0 12.7 M10 0.59
UCF 205 25 95 70 16 14 27.0 12 35.7 34.0 14.3 M10 0.82
UCF 206 30 108 83 18 14 31.0 12 40.2 38.1 15.9 M10 1.10
UCF 207 35 117 92 19 16 34.0 14 44.4 42.9 17.5 M12 1.50
UCF 208 40 130 102 21 16 36.0 16 51.2 49.2 19.0 M14 2.00
UCF 209 45 137 105 22 18 38.0 16 52.2 49.2 19.0 M14 2.40
UCF 210 50 143 111 22 18 40.0 16 54.6 51.6 19.0 M14 2.50
UCF 211 55 162 130 25 20 43.0 19 58.4 55.6 22.2 M16 3.40
UCF 212 60 175 143 29 20 48.0 19 68.7 65.1 25.4 M16 4.60
UCF 213 65 187 149 30 20 50.0 19 69.7 65.1 25.4 M16 5.50
UCF 214 70 193 152 31 24 54.0 19 75.4 74.6 30.2 M16 6.10
UCF 215 75 200 159 34 24 56.0 19 78.5 77.8 33.3 M16 6.90
UCF 216 80 208 165 34 24 58.0 23 83.3 82.6 33.3 M20 7.80
UCF 217 85 220 175 36 26 63.0 23 87.6 85.7 34.1 M20 9.30
UCF 218 90 235 187 40 26 68.0 23 96.3 96.0 39.7 M20 11.30
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
4-15
Square flange
UCF 300
Heavy duty
Set-screw locking
Ball bearing UC 300
UCF 305 25 110 80 16 13 29 16 39 38 15 M14 1.2
UCF 306 30 125 95 18 15 32 16 44 43 17 M14 1.7
UCF 307 35 135 100 20 16 36 19 49 48 19 M16 2.1
UCF 308 40 150 112 23 17 40 19 56 52 19 M16 2.9
UCF 309 45 160 125 25 18 44 19 60 57 22 M16 3.6
UCF 310 50 175 132 28 19 48 23 67 61 22 M20 4.7
UCF 311 55 185 140 30 20 52 23 71 66 25 M20 5.7
UCF 312 60 195 150 33 22 56 23 78 71 26 M20 6.8
UCF 313 65 208 166 33 22 58 23 78 75 30 M20 7.8
UCF 314 70 226 178 36 25 61 25 81 78 33 M22 9.6
UCF 315 75 236 184 39 25 66 25 89 82 32 M22 11.7
UCF 316 80 250 196 38 27 68 31 90 86 34 M27 13.7
UCF 317 85 260 204 44 27 74 31 100 96 40 M27 15.2
UCF 318 90 280 216 44 30 76 35 100 96 40 M30 18.8
UCF 319 95 290 228 59 30 94 35 121 103 41 M30 20.7
UCF 320 100 310 242 59 32 94 38 125 108 42 M33 24.8
UCF 322 110 340 266 60 35 96 41 131 117 46 M36 34.7
UCF 324 120 370 290 65 40 110 41 140 126 51 M36 47.2
UCF 326 130 410 320 65 45 115 41 146 135 54 M36 62.7
UCF 328 140 450 350 75 55 125 41 161 145 59 M36 87.0
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
4-16
Bearing units
CAST IRON version flange cartridge units
Flange cartridge
UCFC 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCFC 201 12 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.89
UCFC 202 15 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.87
UCFC 203 17 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.86
UCFC 204 20 100 78 55.1 10 12 5 7 20.5 62 28.3 31.0 12.7 M10 0.84
UCFC 205 25 115 90 63.6 10 12 6 7 21.0 70 29.7 34.0 14.3 M10 1.10
UCFC 206 30 125 100 70.7 10 12 8 8 23.0 80 32.2 38.1 15.9 M10 1.50
UCFC 207 35 135 110 77.8 11 14 8 9 26.0 90 36.4 42.9 17.5 M12 1.70
UCFC 208 40 145 120 84.8 11 14 10 9 26.0 100 41.2 49.2 19.0 M12 2.10
UCFC 209 45 160 132 93.3 10 16 12 14 26.0 105 40.2 49.2 19.0 M14 3.00
UCFC 210 50 165 138 97.6 10 16 12 14 28.0 110 42.6 51.6 19.0 M14 3.10
UCFC 211 55 185 150 106.1 13 19 12 15 31.0 125 46.4 55.6 22.2 M16 3.90
UCFC 212 60 195 160 113.1 17 19 12 15 36.0 135 56.7 65.1 25.4 M16 4.40
UCFC 213 65 205 170 120.2 16 19 14 15 36.0 145 55.7 65.1 25.4 M16 5.30
UCFC 214 70 215 177 125.1 17 19 14 18 40.0 150 61.4 74.6 30.2 M16 6.80
UCFC 215 75 220 184 130.1 18 19 16 18 40.0 160 62.5 77.8 33.3 M16 7.40
UCFC 216 80 240 200 141.4 18 23 16 18 42.0 170 67.3 82.6 33.3 M20 9.20
UCFC 217 85 250 208 147.1 18 23 18 20 45.0 180 69.6 85.7 34.1 M20 10.60
UCFC 218 90 265 220 155.5 22 23 18 20 50.0 190 78.3 96.0 39.7 M20 12.70
Designation Shaft
diameter
mm a mm p mm e mm i mm s mm j mm k mm g mm f mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
4-17
Flange cartridge
UCFS 300
Heavy duty
Set-screw locking
Ball bearing UC 300
UCFS 305 25 110 80 9 16 7 13 22 80.0 32 38 15 M14 1.4
UCFS 306 30 125 95 10 16 8 15 24 90.0 36 43 17 M14 1.9
UCFS 307 35 135 100 11 19 9 16 27 110 40 48 19 M16 2.4
UCFS 308 40 150 112 13 19 10 17 30 115 46 52 19 M16 3.3
UCFS 309 45 160 125 14 19 11 18 33 125 49 57 22 M16 4.0
UCFS 310 50 175 132 16 23 12 19 36 140 55 61 22 M20 5.3
UCFS 311 55 185 140 17 23 13 20 39 150 58 66 25 M20 6.2
UCFS 312 60 195 150 19 23 14 22 42 160 64 71 26 M20 7.4
UCFS 313 65 208 166 15 23 18 22 40 175 60 75 30 M20 8.6
UCFS 314 70 226 178 18 25 18 25 43 185 63 78 33 M22 11.2
UCFS 315 75 236 184 21 25 18 25 48 200 71 82 32 M22 12.7
UCFS 316 80 250 196 18 31 20 27 48 210 70 86 34 M27 14.3
UCFS 317 85 260 204 24 31 20 27 54 220 80 96 40 M27 17.2
UCFS 318 90 280 216 24 35 20 30 56 240 80 96 40 M30 20.4
UCFS 319 95 290 228 39 35 20 30 74 250 101 103 41 M30 23.9
UCFS 320 100 310 242 39 38 20 32 74 260 105 108 42 M33 27.1
UCFS 322 110 340 266 35 41 25 35 71 300 106 117 46 M36 36.8
UCFS 324 120 370 290 35 41 30 40 80 330 110 126 51 M36 50.6
UCFS 326 130 410 320 35 41 30 45 85 360 116 135 54 M36 67.8
UCFS 328 140 450 350 45 41 30 55 95 400 131 145 59 M36 96.3
Designation Shaft
diameter
mm a mm e i
mm s mm j mm k mm g mm f mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
4-18
Bearing units
CAST IRON version two-bolt flange units
Two-bolt flange
UCFL 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCFL 201 12 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M10 0.50
UCFL 202 15 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M10 0.48
UCFL 203 17 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M10 0.47
UCFL 204 20 113 90 15 12 25.5 12 60 33.3 31.0 12.7 M10 0.45
UCFL 205 25 130 99 16 14 27.0 16 68 35.7 34.0 14.3 M14 0.63
UCFL 206 30 148 117 18 14 31.0 16 80 40.2 38.1 15.9 M14 0.96
UCFL 207 35 161 130 19 16 34.0 16 90 44.4 42.9 17.5 M14 1.20
UCFL 208 40 175 144 21 16 36.0 16 100 51.2 49.2 19.0 M14 1.60
UCFL 209 45 188 148 22 18 38.0 19 108 52.2 49.2 19.0 M16 1.90
UCFL 210 50 197 157 22 18 40.0 19 115 54.6 51.6 19.0 M16 2.20
UCFL 211 55 224 184 25 20 43.0 19 130 58.4 55.6 22.2 M16 3.20
UCFL 212 60 250 202 29 20 48.0 23 140 68.7 65.1 25.4 M20 4.10
UCFL 213 65 258 210 30 24 50.0 23 155 69.7 65.1 25.4 M20 5.10
UCFL 214 70 265 216 31 24 54.0 23 160 75.4 74.6 30.2 M20 6.00
UCFL 215 75 275 225 34 24 56.0 23 165 78.5 77.8 33.3 M20 6.50
UCFL 216 80 290 233 34 24 58.0 25 180 83.3 82.6 33.3 M22 8.00
UCFL 217 85 305 248 36 26 63.0 25 190 87.6 85.7 34.1 M22 9.50
UCFL 218 90 320 265 40 26 68.0 25 205 96.3 96.0 39.7 M22 11.90
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm Bi mm n mm Bolt size Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
4-19
CAST IRON version take-up units
Take-up
UCT 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCT 201 12 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.79
UCT 202 15 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.77
UCT 203 17 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.76
UCT 204 20 16 10 51 32 19 51 12 76 89 94 32 21 61 31.0 12.7 0.74
UCT 205 25 16 10 51 32 19 51 12 76 89 97 32 24 62 34.0 14.3 0.82
UCT 206 30 16 10 56 37 22 57 12 89 102 113 37 28 70 38.1 15.9 1.30
UCT 207 35 16 13 64 37 22 64 12 89 102 129 37 30 78 42.9 17.5 1.60
UCT 208 40 19 16 83 49 29 83 16 102 114 144 49 33 88 49.2 19.0 2.40
UCT 209 45 19 16 83 49 29 83 16 102 117 144 49 35 87 49.2 19.0 2.40
UCT 210 50 19 16 83 49 29 86 16 102 117 149 79 37 90 51.6 19.0 2.50
UCT 211 55 25 19 102 64 35 95 22 130 146 171 64 38 106 55.6 22.2 4.00
UCT 212 60 32 19 102 64 35 102 22 130 146 194 64 42 119 65.1 25.4 5.10
UCT 213 65 32 21 111 70 41 121 26 151 167 224 70 44 137 65.1 25.4 7.00
UCT 214 70 32 21 111 70 41 121 26 151 167 224 70 46 137 74.6 30.2 7.10
UCT 215 75 32 21 111 70 41 121 26 151 167 232 70 48 140 77.8 33.3 7.50
UCT 216 80 32 21 111 70 41 121 26 165 184 235 70 51 140 82.6 33.3 8.50
UCT 217 85 38 29 124 73 48 157 30 173 198 260 73 54 162 85.7 34.1 11.20
Designation Shaft
diameter
mm o mm g mm p mm q mm s mm b mm k mm e mm a mm w mm j mm l mm h mm Bi mm n mm Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Take-up
UCT 300
Heavy duty
Set-screw locking
Ball bearing UC 300
UCT 305 25 16 12 62 36 26 65 12 80 89 122 36 26 76 38 15 1.4
UCT 306 30 18 14 70 41 28 74 16 90 100 137 41 18 85 43 17 1.8
UCT 307 35 20 15 75 45 30 80 16 100 111 150 45 32 94 48 19 2.4
UCT 308 40 22 17 83 50 32 89 18 112 124 162 50 34 100 52 19 3.0
UCT 309 45 24 18 90 55 34 97 18 125 138 178 55 38 110 57 22 4.1
UCT 310 50 27 20 98 61 37 106 20 140 151 191 61 40 117 61 22 5.2
UCT 311 55 29 21 105 66 39 115 22 150 163 207 66 44 127 66 25 6.4
UCT 312 60 31 23 113 71 41 123 22 160 178 220 71 46 135 71 26 7.6
UCT 313 65 32 25 116 70 43 134 26 170 190 238 80 50 146 75 30 9.2
UCT 314 70 36 25 130 85 46 140 26 180 202 252 90 52 155 78 33 11.2
UCT 315 75 36 25 132 85 46 150 26 192 216 262 90 55 160 82 32 13.0
UCT 316 80 42 28 150 98 53 160 30 204 230 282 102 60 174 86 34 15.6
UCT 317 85 42 30 152 98 53 170 32 214 240 298 102 64 183 96 40 19.3
UCT 318 90 46 30 160 106 57 175 32 228 255 312 110 66 192 96 40 21.2
UCT 319 95 46 31 165 106 57 180 35 240 270 322 110 72 197 103 41 24.4
UCT 320 100 48 32 175 115 59 200 35 260 290 345 120 75 210 108 42 30.6
UCT 322 110 52 38 185 125 65 215 38 285 320 385 130 80 235 117 46 38.8
UCT 324 120 60 42 210 140 70 230 45 320 355 432 140 90 267 126 51 54.6
UCT 326 130 65 45 220 150 75 240 50 350 385 465 150 100 285 135 54 68.4
UCT 328 140 70 50 230 160 80 255 50 380 415 515 155 100 315 145 59 83.2
Designation Shaft
diameter
mm o mm g mm p mm q mm s mm b mm k mm e mm a mm w mm j mm l mm h mm Bi mm n mm Weight
kg 4-20
Bearing units
Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
4-21
CAST IRON version cartridge units
Cartridge
UCC 200
Normal duty
Set-screw locking
Ball bearing UC 200
UCC 201 12 72 20 31.0 12.7 0.54
UCC 202 15 72 20 31.0 12.7 0.52
UCC 203 17 72 20 31.0 12.7 0.51
UCC 204 20 72 20 31.0 12.7 0.49
UCC 205 25 80 22 34.0 14.3 0.65
UCC 206 30 85 27 38.1 15.9 0.82
UCC 207 35 90 28 42.9 17.5 0.93
UCC 208 40 100 30 49.2 19.0 1.20
UCC 209 45 110 31 49.2 19.0 1.50
UCC 210 50 120 33 51.6 19.0 1.90
UCC 211 55 125 35 55.6 22.2 2.10
UCC 212 60 130 38 65.1 25.4 2.50
UCC 213 65 140 40 65.1 25.4 3.00
Designation Shaft
diameter
mm a mm l mm Bi mm n mm Weight
kg Available on request with inserts of series UK and KH. Covers are possible as special version.
The conventional housing tolerances are valid for all shown housing dimensions.
All cast housing tolerances are nominal sizes and the conventional cast tolerances must be added.
Pe r fec t qua l i t y and dynamic
Bearing units
4-22
Square flange
MUCF 200
Set-screw locking
Ball bearing MUC 200
MUCF 204 20 86.0 64 15 11 25.5 12 33.3 31.0 12.7 M10 0.65
MUCF 205 25 95.0 70 16 13 27.0 12 35.7 34.1 14.3 M10 0.90
MUCF 206 30 108.0 83 18 13 31.0 12 40.2 38.1 15.9 M10 1.20
MUCF 207 35 117.0 92 19 15 34.0 14 44.4 42.9 17.5 M12 1.60
MUCF 208 40 130.0 102 21 15 36.0 16 51.2 49.2 19.0 M14 2.15
MUCF 209 45 137.0 105 22 16 38.0 16 52.2 49.2 19.0 M14 2.55
MUCF 210 50 143.0 111 22 16 40.0 16 54.6 51.6 19.0 M14 2.65
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg STAINLESS STEEL version
Pillow block
MUCP 200
Set-screw locking
Ball bearing MUC 200
MUCP 204 20 33.3 127 95 30 13 19 9 64 31.0 12.7 M10 0.50
MUCP 205 25 36.5 140 105 30 13 19 10 70 34.1 14.3 M10 0.65
MUCP 206 30 42.9 165 121 36 17 21 11 82 38.1 15.9 M14 0.95
MUCP 207 35 47.6 167 127 38 17 21 12 92 42.9 17.5 M14 1.25
MUCP 208 40 49.2 184 137 40 17 22 12 98 49.2 19.0 M14 1.50
MUCP 209 45 54.0 190 146 40 17 22 13 105 49.2 19.0 M14 1.75
MUCP 210 50 57.2 206 159 45 20 25 14 112 51.6 19.0 M16 2.05
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 mm g mm w mm Bi mm n mm Bolt size Weight
kg 4-23
Two-bolt flange
MUCFL 200
Set-screw locking
Ball bearing MUC 200
MUCFL 204 20 113 90 15 10 25.5 12 60 33.3 31.0 12.7 M10 0.35
MUCFL 205 25 130 99 16 10 27.0 16 68 35.7 34.1 14.3 M14 0.50
MUCFL 206 30 148 117 18 10 31.0 16 80 40.2 38.1 15.9 M14 0.80
MUCFL 207 35 161 130 19 11 34.0 16 90 44.4 42.9 17.5 M14 1.05
MUCFL 208 40 175 144 21 11 36.0 16 100 51.2 49.2 19.0 M14 1.35
MUCFL 209 45 188 148 22 13 38.0 19 108 52.2 49.2 19.0 M16 1.65
MUCFL 210 50 197 157 22 13 40.0 19 115 54.6 51.6 19.0 M16 1.90
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm Bi mm n mm Bolt size Weight
kg Take-up
MUCT 200
Set-screw locking
Ball bearing MUC 200
MUCT 204 20 16 12 51 32 19 51 12 76 89 94 21 32 61 31.0 12.7 0.80
MUCT 205 25 16 12 51 32 19 51 12 76 89 97 24 32 62 34.1 14.3 0.90
MUCT 206 30 16 12 56 37 22 57 12 89 102 113 28 37 70 38.1 15.9 1.40
MUCT 207 35 16 15 64 37 22 64 12 89 102 129 30 37 78 42.9 17.5 1.70
MUCT 208 40 19 18 83 49 29 83 16 102 114 144 33 49 88 49.2 19.0 2.60
MUCT 209 45 19 18 83 49 29 83 16 102 117 145 35 49 87 49.2 19.0 2.55
MUCT 210 50 19 18 83 49 29 86 16 102 117 151 37 49 90 51.6 19.0 2.65
Designation Shaft
diameter
mm o mm g mm p mm q mm s mm b mm k mm e mm a mm w mm l mm j mm h mm Bi mm n mm Weight
kg Pe r fec t qua l i t y and dynamic
Bearing units
4-24
PRESSED STEEL version
Pillow block
with yellow galvanized housing
BPP 200
Light duty
Set-screw locking
Ball bearing B200
BPP 201-Z2 12 22.2 86 68 25 9.5 3.2 44 22.0 6.0 M 8 0.16
BPP 202-Z2 15 22.2 86 68 25 9.5 3.2 44 22.0 6.0 M 8 0.15
BPP 203-Z2 17 22.2 86 68 25 9.5 3.2 44 22.0 6.0 M 8 0.13
BPP 204-Z2 20 25.4 98 76 32 9.5 3.2 50 24.7 7.0 M 8 0.21
BPP 205-Z2 25 28.6 108 86 32 11.5 4.0 56 27.7 7.5 M10 0.29
BPP 206-Z2 30 33.3 117 95 38 11.5 4.0 66 30.3 8.0 M10 0.42
BPP 207-Z2 35 39.7 129 106 42 11.5 4.6 78 32.9 8.5 M10 0.61
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm Bi mm n mm Bolt size Weight
kg Round flange with pressed steel housing
BPF 200
Light duty
Set-screw locking
Ball bearing B200
BPF 201 12 81 63.5 2.0 14 7 49 29 22.0 6.0 M 6 0.21
BPF 202 15 81 63.5 2.0 14 7 49 29 22.0 6.0 M 6 0.20
BPF 203 17 81 63.5 2.0 14 7 49 29 22.0 6.0 M 6 0.18
BPF 204 20 90 71.5 2.0 16 9 56 33 24.7 7.0 M 8 0.25
BPF 205 25 95 76.0 2.0 18 9 60 35 27.7 7.5 M 8 0.35
BPF 206 30 113 90.5 2.6 18 11 71 38 30.3 8.0 M10 0.54
BPF 207 35 120 100.0 2.6 20 11 81 45 32.9 8.5 M10 0.71
Designation Shaft
diameter
mm a mm p mm t mm b mm s mm F
min.
mm W
mm Bi mm n mm Bolt size Weight
kg Two-bolt flange
BPFL 200
Light duty
Set-screw locking
Ball bearing B200
BPFL 201 12 81 63.5 2.0 14 7 59 49 22.0 6.0 M 6 0.25
BPFL 202 15 81 63.5 2.0 14 7 59 49 22.0 6.0 M 6 0.24
BPFL 203 17 81 63.5 2.0 14 7 59 49 22.0 6.0 M 6 0.22
BPFL 204 20 90 71.5 2.0 16 9 67 56 24.7 7.0 M 8 0.29
BPFL 205 25 95 76.0 2.0 18 9 71 60 27.7 7.5 M 8 0.36
BPFL 206 30 113 90.5 2.6 18 11 84 71 30.3 8.0 M10 0.56
BPFL 207 35 122 100.0 2.6 20 11 94 81 32.9 8.5 M10 0.70
Designation Shaft
diameter
mm a mm e mm t mm b mm s mm c mm F
mm Bi mm n mm Bolt size Weight
kg 4-25
Pe r fec t qua l i t y and dynamic
Bearing units
4-26
Two-bolt flange
KPL 000
Set-screw locking
Insert KP 000
KFL 000 10 60 45 5.5 5.5 11.5 7.0 36 15.5 14.0 4.0 M 6 0.060
KFL 001 12 63 48 5.5 5.5 11.5 7.0 38 16.0 14.5 4.0 M 6 0.076
KFL 002 15 67 53 6.5 6.5 13.0 7.0 42 18.6 16.5 4.5 M 6 0.100
KFL 003 17 71 56 7.0 7.0 14.0 7.0 46 19.5 17.5 5.0 M 6 0.129
KFL 004 20 90 71 8.0 8.0 16.0 10.0 55 23.0 21.0 6.0 M 8 0.205
KFL 005 25 95 75 8.0 8.0 16.0 10.0 60 24.5 22.5 6.0 M 8 0.244
KFL 006 30 112 85 9.0 9.0 18.0 13.0 70 27.0 24.5 6.5 M10 0.354
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm L
mm n mm Bolt size Weight
kg SILVER version
Pillow block
KP 000
Set-screw locking
Insert K 000
KP 000 10 18 67 53 16 7 6 35 14.0 4.0 M 6 0.077
KP 001 12 19 71 56 16 7 6 38 14.5 4.0 M 6 0.091
KP 002 15 22 80 63 16 7 7 43 16.5 4.5 M 6 0.125
KP 003 17 24 85 67 18 7 7 47 17.5 5.0 M 6 0.156
KP 004 20 28 100 80 20 10 9 55 21.0 6.0 M 8 0.230
KP 005 25 32 112 90 20 10 10 62 22.5 6.0 M 8 0.294
KP 006 30 36 132 106 26 13 11 70 24.5 6.5 M10 0.454
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm L
mm n mm Bolt size Weight
kg Two-bolt flange
UFL 000
Eccentric collar locking
Insert U 000+ER
UFL 000 10 60 45 5.5 5.5 11.5 7.0 36 19.0 17.5 4.0 M 6 0.060
UFL 001 12 63 48 5.5 5.5 11.5 7.0 38 19.0 17.5 4.0 M 6 0.076
UFL 002 15 67 53 6.5 6.5 13.0 7.0 42 20.5 18.5 4.5 M 6 0.100
UFL 003 17 71 56 7.0 7.0 14.0 7.0 46 22.5 20.5 5.0 M 6 0.129
UFL 004 20 90 71 8.0 8.0 16.0 10.0 55 26.5 24.5 6.0 M 8 0.205
UFL 005 25 95 75 8.0 8.0 16.0 10.0 60 27.5 25.5 6.0 M 8 0.244
UFL 006 30 112 85 9.0 9.0 18.0 13.0 70 29.0 26.5 6.5 M10 0.354
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm L
mm n mm Bolt size Weight
kg 4-27
Pillow block
UP 000
Eccentric collar locking
Insert U 000+ER
UP 000 10 18 67 53 16 7.0 6 35 17.5 4.0 M 6 0.077
UP 001 12 19 71 56 16 7.0 6 38 17.5 4.0 M 6 0.091
UP 002 15 22 80 63 16 7.0 7 43 18.5 4.5 M 6 0.125
UP 003 17 24 85 67 18 7.0 7 47 20.5 5.0 M 6 0.156
UP 004 20 28 100 80 20 10.0 9 55 24.5 6.0 M 8 0.230
UP 005 25 32 112 90 20 10.0 10 62 25.5 6.0 M 8 0.294
UP 006 30 36 132 106 26 13.0 11 70 26.5 6.5 M10 0.454
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm L
mm n mm Bolt size Weight
kg Pe r fec t qua l i t y and dynamic
Bearing units
4-28
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm L
mm n mm Bolt size Weight
kg Two-bolt flange
MUFL 000
Eccentric collar locking
Insert MU 000+ER
MUFL 000 10 60 45 5.5 5.5 11.5 7 36 19.0 17.5 4.0 M 6 0.060
MUFL 001 12 63 48 5.5 5.5 11.5 7 38 19.0 17.5 4.0 M 6 0.076
MUFL 002 15 67 53 6.5 6.5 13.0 7 42 20.5 18.5 4.5 M 6 0.100
MUFL 003 17 71 56 7.0 7.0 14.0 7 46 22.5 20.5 5.0 M 6 0.129
MUFL 004 20 90 71 8.0 8.0 16.0 10 55 26.5 24.5 6.0 M 8 0.205
MUFL 005 25 95 75 8.0 8.0 16.0 10 60 27.5 25.5 6.0 M 8 0.244
MUFL 006 30 112 85 9.0 9.0 18.0 13 70 29.0 26.5 6.5 M10 0.354
STAINLESS SILVER version
Pillow block
MUP 000
Eccentric collar locking
Insert MU 000+ER
MUP 000 10 18 67 53 16 7 6 35 17.5 4.0 M 6 0.077
MUP 001 12 19 71 56 16 7 6 38 17.5 4.0 M 6 0.091
MUP 002 15 22 80 63 16 7 7 43 18.5 4.5 M 6 0.125
MUP 003 17 24 85 67 18 7 7 47 20.5 5.0 M 6 0.156
MUP 004 20 28 100 80 20 10 9 55 24.5 6.0 M 8 0.230
MUP 005 25 32 112 90 20 10 10 62 25.5 6.0 M 8 0.294
MUP 006 30 36 132 106 26 13 11 70 26.5 6.5 M10 0.454
Designation Shaft
diameter
mm h mm a mm e mm b mm s mm g mm w mm L
mm n mm Bolt size Weight
kg Square flange
MUCB 200-SBFD
Set-screw locking
Insert MUC 200
MUCB 204-SB 20 86.0 63.5 18.0 13.4 27.8 11 36.3 31.0 12.7 M10 0.23
MUCB 205-SB 25 94.5 70.0 17.0 14.3 27.9 11 36.8 34.1 14.3 M10 0.30
MUCB 206-SB 30 107.0 83.0 19.2 14.3 31.5 11 41.4 38.1 15.9 M12 0.44
MUCB 207-SB 35 147.0 92.0 21.5 15.5 34.8 13 46.9 42.9 17.5 M12 0.65
MUCB 208-SB 40 130.0 102.0 23.0 17.0 37.5 14 53.2 49.2 19.5 M12 0.87
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm Z
mm Bi mm n mm Bolt size Weight
kg 4-29
PLASTIC version
Pillow block
MUCA 200-SBFD
Set-screw locking
Insert MUC 200
MUCA 204-SB 20 33.3 127 95 38 11 14 14.2 65 31.0 12.7 M10 0.28
MUCA 205-SB 25 36.5 140 105 38 11 14 14.5 71 34.1 14.3 M10 0.33
MUCA 206-SB 30 42.9 162 119 46 14 18 17.8 83 38.1 15.9 M12 0.52
MUCA 207-SB 35 47.6 167 127 48 14 18 18.0 94 42.9 17.5 M12 1.73
MUCA 208-SB 40 49.2 184 137 54 14 18 19.5 98 49.2 19.0 M12 1.95
Designation Shaft
diameter
mm h mm a mm e mm b mm s1 mm s2 min.
mm g min.
mm w max.
mm Bi mm n mm Bolt size Weight
kg Pe r fec t qua l i t y and dynamic
4-30
Two-bolt flange
MUCD 200-SBFD
Set-screw locking
Insert MUC 200
MUCD 204-SB 20 113 90 15.4 11.4 26.5 11 64 33.7 31.0 12.7 M10 0.23
MUCD 205-SB 25 130 99 17.0 13.5 29.1 11 68 36.8 34.1 14.3 M10 0.30
MUCD 206-SB 30 148 117 19.0 13.3 30.5 11 80 41.2 38.1 15.9 M12 0.44
MUCD 207-SB 35 163 130 18.0 16.1 32.8 13 90 43.4 42.9 17.5 M12 0.65
MUCD 208-SB 40 175 144 21.5 20.0 37.5 14 100 51.7 49.2 19.0 M12 0.87
Designation Shaft
diameter
mm a mm e mm i mm g mm l mm s mm b mm Z
mm Bi mm n mm Bolt size Weight
kg Bearing units
Cam follower stude type, standard P. 5-8
Cam follower stude type, heavy load P. 5-10
Cam follower yoke type, standard P. 5-12
Cam follower yoke type, heavy load P. 5-14
Metric cam follower bearings
Cam follower stude type,
standard
Cam follower yoke type,
standard
Cam follower stude type,
heavy load
Cam follower yoke type,
heavy load
M
e tr ic c a m f o ll o w e r b e a ri n g s Pe r fec t qua l i t y and dynamic
5-2
Metric cam follower bearings
Load ratings
The Basic Load Rating or Basic Dynamic Rating, as defined
by ABMA and ISO, is that calculated, constant radial load
which 90% of a group of apparently identical bearings with
stationary outer ring can theoretically endure for a rating life of
1.000.000 revolutions (331/3 rpm for 500 hours). The Basic
Load Rating is a reference value only, the base value of
1.000.000 revolutions chosen for ease of calculation.
The dimensional tables list the Basic Dynamic (C) and Basic
Static (Co) Load Ratings as calculated by the ISO and AFBMA
Standards. Also listed are the Dynamic and Static Ratings for
the CAMROL bearings operating as track rollers. These
dynamic and static ratings are less than those calculated by
the basic load rating formulas (C and Co) and account for the
additional bending stressed present because the outer ring is
unsupported. The load applied on the bearing while it is
operating dynamically should not exceed 50% of the Dynamic
Rating as a Track Roller.
Bearing life
Statistical L10 bearing fatigue life can be calculated according
to the following formula:
L10 Life in Hours =
16666
N
x (BDR)P
10
3
BDR = Basic Dynamic Rating (Newtons)
P = Radial Load (Newtons)
N = Speed( RPM)
L10 = Fatigue Life (Hours)
To determine the Basic Dynamic Rating required for a given
application, use the following formula:
BDR = 0.054 x P x (L10 x N)
0,3
Mounting
The following should be considered in mounting CAMROL
bearings:
• The housing that supports the cam follower stud (or the
shaft on which the cam yoke roller is mounted) should be of
sufficient strength to resist excessive deformation and
bending under the expected applied load.
• The face of the housing should be flat and square with the
housing bore, and must have a diameter of at least that
listed in the dimensional tables for proper support of the
bearing endplate.
• In order to obtain the best support for the CAMROL
bearing, the chamfer on the housing bore should not
exceed 0.5 mm x 45 °.
• When mounting Stud Type CAMROL bearings in a machine
member, the radial lubrication hole (it is in line with the
McGill name) should be located in the unloaded portion of
the raceway.
• Any pressure required for installation should be applied
against the solid center portion of the flanged inner stud
(not on the flange perimeter), and the cam follower should
be drawn up tightly by the nut so the bearing endplate is
securely backed up.
• Precaution should be taken to avoid excessive torque when
tightening the clamping nut; otherwise undue stress may be
set up in the stud.
• The clamping nut should not be tightened beyond the
maximum clamping torque listed in the dimensional table.
• Yoke Type CAMROL bearings should be mounted with the
lubrication hole in the unloaded portion of the raceway and
according to the recommended shaft dimensions listed in
the tabular data.
• When a tight fit of the bearing on a shaft is desired, an ISO
j6 shaft tolerance should be employed.
• For heavily loaded applications, the bearing should be clamped endwise and mounted on a high strength shaft with an
ISO j6 tolerance.
• If the bearing cannot be clamped endwise, it is essential to
have a close axial fit in the yoke in which the bearing is
mounted to prevent axial displacement of the endplates
under load.
Provision for relubrication – stud type
Stud type CAMROL bearings have provision for relubrication
either through the end of the inner stud or through a cross
drilled hole in the stud shank. The drilled hole is located above
the ”G” of the McGill marking.
Sizes up through 19 mm OD do not have an axial hole from
the threaded end, and no cross drill hole is present in the stud
shank on sizes through 26 mm OD. The counterbored ends of
the axial holes are designed to accept a press-fitted type
metric lubrication fitting. Closing plugs are supplied so that the
unused axial hole or holes can be sealed. If the cross drilled
hole is not used for relubrication, it should be covered by the
housing; therefore, no plug is supplied for this hole.
Provision for relubrication – yoke type
Yoke Type CAMROL bearings have a lubrication hole in the
inner ring bore so relubrication can be accomplished through a
cross-drilled hole in the supporting shaft if desired.
Track design
Since cam followers or cam yoke rollers are merely one
component of a two-piece bearing construction, along with
the track or cam on which it operates, proper selection of the
track or cam material must be considered. This selection has
a direct effect upon ultimate life and performance of the cam
roll application.
Where bearings are used as support or guide rollers, it is often
difficult to obtain high hardness and tensile strength values for
the machine members against which the bearings operate. In
the interest of economy, relatively soft structural materials can
be applied in most applications where dimensional accuracy is
not extremely critical. The work hardening of ferrous, low carbon track materials, accompanied by relatively small
amounts of wear-in of the bearing into the track surface,
generally results in satisfactory bearing performance. In the
application of cam follower or cam yoke roller bearings (lift
truck mast rollers, for instance), it is common to employ
formed structural steel sections as bearing track support
members, and the wearing-in and work hardening of the track
surface generally results in a satisfactory bearing application,
providing loads are not excessive.
5-3
Cam design
Cam applications are similar in many respects to track or
support roller applications, except that bearing speeds are
higher due to the multiplication of cam revolutions per minute
by the ratio of the cam OD to the cam follower OD. Because
of these higher speeds, oil lubrication is preferred, but where
such lubrication methods are not possible, grease should be
replaced frequently.
In the application of box or drum cams, it is possible to obtain
differential rotation of the cam follower outer race as well as
associated load reversals. This may result in excessive wear of
cams or cam followers unless proper cam hardness and
materials are employed, as well as ample lubrication. In box
cams of this nature, the cam rise and cam fall should be
watched closely, since the load reversal encountered can
cause shock loads in excess of the capacity of the stud or
bearing.
The same precaution applies to ordinary circular cams.
Instantaneous loads due to rapid cam rise should be carefully
calculated and kept below the ultimate strength of the follower
and the stud.
In ordinary cam design it is possible to employ the most
efficient materials for best resistance to fatigue and brinelling,
and attainment of high track surface hardnesses associated
with good wear resistance is quite feasible. The same general
precautions concerning tensile strength, as listed under track
design above, should be followed for cam design; applications
involving high marginal bearing or cam loading should be
referred to the McGill Engineering Department.
Track capacity
Track capacity of all cam follower and cam yoke roller
bearings is the load which a steel track of a given tensile
strength will withstand continuously without deformation or
brinelling. Table II lists track capacities for steel tracks for the
standard crowned roller outside diameter versions. For the
straight cylindrical roller outside diameter versions
(”-X” suffix), multiply by 1.25 to obtain the track capacity
ratings.
To obtain track capacities for track hardnesses other than
Rockwell ”C” scale 40 (tensile strength 1242 MPa), multiply
track capacity by track capacity factor listed in Table I.
Regardless of track capacity, dynamic load should not exceed
50% of basic dynamic rating as a track roller and static load
should not exceed maximum static rating as a track roller.
Pe r fec t qua l i t y and dynamic
5-4
Metric cam follower bearings
Table 1 – Track Tensile Strength
MPa Track hardness Track capacity
Rockwell “C” Factor
828 26 0.445
966 32 0.667
1104 36 0.792
1242 40 1.000
1380 44 1.237
1518 47 1.495
1656 50 1.775
1794 53 2.090
1932 56 2.420
2070 58 2.780
Table 2 – Track Capacities
Basic bearing number Track capacity
Newton
MCFR 13 1910
MCFR 16 2940
MCYRR 5 2940
MCFR 19 3490
MCYRR 6 3490
MCFR 22 4270
MCYRR 8 5500
MCFR 26 5050
MCFR 30 6350
MCYRR 10 6350
MCFR 32 6780
MCYRR 12 6780
MCFR 35 9840
MCYRR 15 9840
MCFD 35 9840
MCYRD 15 9840
MCFR 40 12000
MCYRR 17 12000
MCFD 40 12000
MCYRD 17 12000
MCFR 47 17400
MCYRR 20 17400
MCFD 47 17400
MCYRD 20 17400
MCFR 52 19200
MCYRR 25 19200
MCFD 25 19200
MCYRD 25 19200
MCFR 62 28400
MCYRR 30 27400
MCFD 62 28400
MCYRD 30 27400
MCFR 72 31800
MCYRR 35 30500
MCFD 72 31800
MCYRD 35 30500
MCFR 80 43800
MCYRR 40 36700
MCFD 80 43800
MCYRD 40 36700
MCFR 85 46400
MCYRR 45 39000
MCYRD 45 39000
MCFR 90 49200
MCYRR 50 41300
MCFD 90 49200
MCYRD 50 41300
5-5
Stud type MCFD series
Cylindrical Roller Dia. “RD”
RD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
30 50 0 -0.011
50 80 0 -0.013
80 120 0 -0.015
Crowned Roller Dia. “RD”
SD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
30 120 0 -0.050
Stud Dia. “SD”
SD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
10 18 0 -0.018
18 30 0 -0.021
Yoke type MCYRD series
Cylindrical Roller Dia. “RD”
RD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
6 18 0 -0.008
18 30 0 -0.009
30 50 0 -0.011
50 80 0 -0.013
80 120 0 -0.015
Crowned Roller Dia “RD”
SD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
6 120 0 -0.050
Tolerance limits
Stud type MCF series
Cylindrical Roller Dia. “RD”
RD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
6 18 0 -0.008
18 30 0 -0.009
30 50 0 -0.011
50 80 0 -0.013
80 120 0 -0.015
Crowned Roller Dia. “RD”
RD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
6 120 0 -0.050
Stud Dia. “SD”
SD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
2 6 0 -0.012
6 10 0 -0.015
10 18 0 -0.018
18 30 0 -0.021
Yoke type MCYR series
Cylindrical Roller Dia. “RD”
RD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
6 18 0 -0.008
18 30 0 -0.009
30 50 0 -0.011
50 80 0 -0.013
80 120 0 -0.015
Crowned Roller Dia. “RD”
RD (NOM.) Tolerance
over incl. MAX. MIN.
mm mm mm mm
6 120 0 -0.050
Pe r fec t qua l i t y and dynamic
5-6
Metric cam follower bearings
Stude type with eccentric collar
Basic G* BD Ecc. Recommended
bearing + 0.05 Eccentricity housing bore dia.
number - 0.15 mm +0.025
-0.000
mm MIN. MAX. mm mm
16 7 8.964 9.000 0.5 9.050
19 9 10.957 11.000 0.5 11.050
22 10 12.957 13.000 0.5 13.050
22A 10 12.957 13.000 0.5 13.050
26 10 12.957 13.000 0.5 13.050
26A 10 12.957 13.000 0.5 13.050
30 11 14.957 15.000 0.5 15.050
32 11 14.957 15.000 0.5 15.050
35 14 19.948 20.000 1.0 20.050
40 16 21.948 22.000 1.0 22.050
40A 16 21.948 22.000 1.0 22.050
47 18 23.948 24.000 1.0 24.050
47A 18 23.948 24.000 1.0 24.050
52 18 23.948 24.000 1.0 24.050
52A 18 23.948 24.000 1.0 24.050
62 22 27.948 28.000 1.0 28.050
62A 22 27.948 28.000 1.0 28.050
72 22 27.948 28.000 1.0 28.050
72A 22 27.948 28.000 1.0 28.050
80 29 34.938 35.000 1.5 35.050
85 29 34.938 35.000 1.5 35.050
90 29 34.938 35.000 1.5 35.050
* For positive clamping. housing thickness should be 0.3 mm greater than G dimension.
5-7
Unsealed metric CAMROL bearings yoke type
McGill INA SKF NTN IKO THK
cage full complement cage full complement cage full complement
MCYRR 5 MCYR 5 NATR-5 NATV-5 NART-5R NART-5VR
MCYRR 6 MCYR 6 NATR-6 NATV-6 NART-6R NART-6VR
MCYRR 8 MCYR 8 NATR-8 NATV-8 NART-8R NART-8VR
MCYRR 10 MCYR 10 NATR-10 NATV-10 NART-10R NART-10VR
MCYRR 12 MCYR 12 NATR-12 NATV-12 NART-12R NART-12VR
MCYRR 15 MCYR 15 NATR-15 NATV-15 NART-15R NART-15VR
MCYRR 17 MCYR 17 NATR-17 NATV-17 NART-17R NART-17VR
MCYRR 20 MCYR 20 NATR-20 NATV-20 NART-20R NART-20VR
MCYRR 25 MCYR 25 NATR-25 NATV-25 NART-25R NART-25VR
MCYRR 30 MCYR 30 NATR-30 NATV-30 NART-30R NART-30VR
MCYRR 35 MCYR 35 NATR-35 NATV-35 NART-35R NART-35VR
MCYRR 40 MCYR 40 NATR-40 NATV-40 NART-40R NART-40VR
MCYRR 45 MCYR 45 NATR-45 - NART-45R NART-45VR
MCYRR 50 MCYR 50 NATR-50 NATV-50 NART-50R NART-50VR
Metric CAMROL bearings yoke type, full complement
McGill INA FAG NTN
MCYRD 15 NUTR-15 NUTR-202
MCYRD 17 NUTR-17 NUTR-203
MCYRD 20 NUTR-20 NUTR-204
MCYRD 25 NUTR-25 NUTR-205
MCYRD 30 NUTR-30 NUTR-206
MCYRD 35 NUTR-35 NUTR-207
MCYRD 40 NUTR-40 NUTR-208
MCYRD 45 NUTR-45 NUTR-209
MCYRD 50 NUTR-50 NUTR-210
Metric CAMROL bearings stude type, full complement
McGill INA FAG NTN
MCFD 35 NUKR-35
MCFD 40 NUKR-40
MCFD 47 NUKR-47
MCFD 52 NUKR-52
MCFD 62 NUKR-62
MCFD 72 NUKR-72
MCFD 80 NUKR-80
MCFD 90 NUKR-90
Coding for Other Cam Follower and Yoke Roller Types
Optional features McGill INA SKF IKO NTN THK
Seals -S -PP -UU -LL -UU
Cylindrical OD -X -X ohne R -X ohne R
Hexagonal Hole * -B -SK -B -H -A
Eccentric Collar * E E E - *) Not applicable for yoke roller types
Interchangeability charts
Unsealed metric CAMROL bearings stude type
McGill INA SKF NTN IKO THK
cage full complement cage full complement cage full complement
MCFR 13 - - - CF 5 -
MCFR 16 MCF 16 KR-16 KRV-16 CF 6 R CF 6 VR
MCFR 19 MCF 19 KR-19 KRV-19 CF 8 R CF 8 VR
MCFR 22 MCF 22 KR-22 KRV-22 - -
MCFR 26 MCF 26 KR-26 KRV-26 - -
MCFR 30 MCF 30 KR-30 KRV-30 CF 12 R CF 12 VR
MCFR 32 MCF 32 KR-32 KRV-32 CF 12-1 R CF 12-1 VR
MCFR 35 MCF 35 KR-35 KRV-35 CF 16 R CF 16 VR
MCFR 40 MCF 40 KR-40 KRV-40 - -
MCFR 47 MCF 47 KR-47 KRV-47 - -
MCFR 52 MCF 52 KR-52 KRV-52 - -
MCFR 62 MCF 62 KR-62 KRV-62 - -
MCFR 72 MCF 72 KR-72 KRV-72 - -
MCFR 80 MCF 80 KR-80 KRV-80 CF 30 R CF 30 VR
MCFR 85 MCF 85 KR-85 - CF 30-1 R CF 30-1 VR
MCFR 90 MCF 90 KR-90 KRV-90 CF 30-2 R CF 30-2 VR
Pe r fec t qua l i t y and dynamic
5-8
Metric cam follower bearings
MCF Series - full complement, crowned roller diameter
Serie MCFR - cage type, crowned roller diameter
For other versions add following suffix:
-S: sealing
-B: broach slot (5)
-X: cylindrical roller diameter
E: eccentric collar design
(All features are to combine together)
Designation RD W
+0.00 -0.12
SD SL L E M TL HC HD D R
mm mm mm mm mm mm mm mm mm mm mm mm
MCFR 13 13 9 5 13.0 23 0.6 M 5x0.8 7.5 - - 3.1  0.3
MCF 16 16 11 6 16.0 28 0.6 M 6x1 9.0 - - 4.0  0.3
MCFR 16 16 11 6 16.0 28 0.6 M 6x1 9.0 - - 4.0  0.3
MCF 19 19 11 8 20.0 32 0.6 M 8x1.25 11.0 - - 4.0 0.3
MCFR 19 19 11 8 20.0 32 0.6 M 8x1.25 11.0 - - 4.0 0.3
MCF 22 22 12 10 23.0 36 0.6 M 10x1 12.0 - - 4.0 0.5
MCFR 22 22 12 10 23.0 36 0.6 M 10x1 12.0 - - 4.0 0.5
MCF 26 26 12 10 23.0 36 0.6 M 10x1 12.0 - - 4.0 0.5
MCFR 26 26 12 10 23.0 36 0.6 M 10x1 12.0 - - 4.0 0.5
MCF 30 30 14 12 25.0 40 0.6 M 12x1.5 14.0 6 3 6.0 1.0
MCFR 30 30 14 12 25.0 40 0.6 M 12x1.5 14.0 6 3 6.0 1.0
MCF 32 32 14 12 25.0 40 0.6 M 12x1.5 14.0 6 3 6.0 1.0
MCFR 32 32 14 12 25.0 40 0.6 M 12x1.5 14.0 6 3 6.0 1.0
MCF 35 35 18 16 32.5 52 0.8 M 16x1.5 18.0 8 3 6.0 1.0
MCFR 35 35 18 16 32.5 52 0.8 M 16x1.5 18.0 8 3 6.0 1.0
MCF 40 40 20 18 36.5 58 0.8 M 18x1.5 19.0 8 3 6.0 1.5
MCFR 40 40 20 18 36.5 58 0.8 M 18x1.5 19.0 8 3 6.0 1.5
MCF 47 47 24 20 40.5 66 0.8 M 20x1.5 21.0 9 4 8.0 1.5
MCFR 47 47 24 20 40.5 66 0.8 M 20x1.5 21.0 9 4 8.0 1.5
MCF 52 52 24 20 40.5 66 0.8 M 20x1.5 21.0 9 4 8.0 1.5
MCFR 52 52 24 20 40.5 66 0.8 M 20x1.5 21.0 9 4 8.0 1.5
MCF 62 62 29 24 49.5 80 0.8 M 24x1.5 25.0 11 4 8.0 1.5
MCFR 62 62 29 24 49.5 80 0.8 M 24x1.5 25.0 11 4 8.0 1.5
MCF 72 72 29 24 49.5 80 0.8 M 24x1.5 25.0 11 4 8.0 2.0
MCFR 72 72 29 24 49.5 80 0.8 M 24x1.5 25.0 11 4 8.0 2.0
MCF 80 80 35 30 63.0 100 1.0 M 30x1.5 32.0 15 4 8.0 2.0
MCFR 80 80 35 30 63.0 100 1.0 M 30x1.5 32.0 15 4 8.0 2.0
MCF 85 85 35 30 63.0 100 1.0 M 30x1.5 32.0 15 4 8.0 2.0
MCFR 85 85 35 30 63.0 100 1.0 M 30x1.5 32.0 15 4 8.0 2.0
MCF 90 90 35 30 63.0 100 1.0 M 30x1.5 32.0 15 4 8.0 2.0
MCFR 90 90 35 30 63.0 100 1.0 M 30x1.5 32.0 15 4 8.0 2.0
(1) Clamping torque is based on dry threads. If threads are lubricated, use half of value
shown.
(2) Since load, lubrication method, temperature and other factors affect the maximum
operating speed, it is impossible to determine precise limiting speed. The listed limiting
speeds are based on lightly loaded bearings having adequate lubrication and are listed
only as a design guide. More frequent relubrication is required when operating at higher
speeds. Actual bearing testing in the specific application should be conducted if the
anticipated operating speed approaches the listed limiting speed.
(3) Dynamic load should not exceed 50% of Dynamic Rating as a track roller.
(4) Static load rating is based on stud strengh or on internal rolling element load distribution
stresses.
(5) In this modification, relubrication through the flange end of the stud is not possible.
 Sizes marked have no lube holes in threaded end of stud.
5-9
Clamping dia
min
Clamping
torque
max (1)
Limiting
speed
grease (4)
Limiting
speed oil (4)
Housing
bore dia
min
Housing
bore dia
max
dynamic C static C0 dynamic C
(3)
static C0
(2)
Weight
mm Nm min-1 min-1 mm mm N N N N kg
9 2.2 20000 30000 5 5.012 2450 2260 2060 1650 0.010
11 3.0 13000 17000 6 6.012 6960 8340 5790 2350 0.019
11 3.0 19500 25000 6 6.012 4120 4120 3430 2350 0.028
13 8.0 10500 13500 8 8.015 8040 10490 6670 5100 0.029
13 8.0 15500 20000 8 8.015 4510 5000 3730 4140 0.028
15 15.0 9000 11500 10 10.015 9410 12360 7850 10400 0.044
15 15.0 13500 17500 10 10.015 6280 7260 5200 6050 0.043
Load ratings Track roller load ratings
15 15.0 9000 11500 10 10.015 9410 12360 7850 10400 0.056
15 15.0 13500 17500 10 10.015 6280 7260 5200 6050 0.055
19 22.0 6400 8300 12 12.018 13240 18140 11080 15300 0.089
19 22.0 9600 12500 12 12.018 8240 9710 6860 8050 0.087
19 22.0 6400 8300 12 12.018 13240 18140 11080 15300 0.099
19 22.0 9600 12500 12 12.018 8240 9710 6860 8050 0.096
24 57.0 4200 5500 16 16.018 20300 34130 16970 28500 0.171
24 57.0 6300 8000 16 16.018 13040 19030 10890 15900 0.166
27 85.0 3300 4300 18 18.018 23240 38540 19420 32200 0.248
27 85.0 5000 6400 18 18.018 15990 23730 13340 19800 0.245
30 118.0 2600 3400 20 20.021 30790 57670 25690 46700 0.393
30 118.0 3900 5000 20 20.021 21280 35700 17750 29800 0.387
30 118.0 2600 3400 20 20.021 30790 57670 25690 46700 0.455
30 118.0 3900 5000 20 20.021 21280 35700 17750 29800 0.453
38 216.0 2100 2700 24 24.021 46580 92680 38840 65400 0.810
38 216.0 3100 4100 24 24.021 31680 55700 26830 46300 0.801
38 216.0 2100 2700 24 24.021 46580 92680 38840 65400 1.048
38 216.0 3100 4100 24 24.021 31680 55700 26830 46300 1.039
51 441.0 1500 2000 30 30.021 76980 159850 64140 102300 1.642
51 441.0 2200 2900 30 30.021 56000 105030 46680 87600 1.621
51 441.0 1500 2000 30 30.021 76980 159850 64140 102300 1.814
51 441.0 2200 2900 30 30.021 56000 105030 46680 87600 1.793
51 441.0 1500 2000 30 30.021 76980 159850 64140 102300 2.002
51 441.0 2200 2900 30 30.021 56000 105030 46680 87600 1.981
Pe r fec t qua l i t y and dynamic
5-10
Metric cam follower bearings
Designation RD W
+0.00 -0.12
SD SL L E M TL HC HD D R
mm mm mm mm mm mm mm mm mm mm mm mm
MCFD 35 35 18 16 32.5 52 0.8 M 16x1.5 17 8 3 6 0.6
MCFD 40 40 20 18 26.5 58 0.8 M 18x1.5 19 8 3 6 1.0
MCFD 47 47 24 20 40.5 66 0.8 M 20x1.5 21 9 4 8 1.0
MCFD 52 52 24 20 40.5 66 0.8 M 20x1.5 21 9 4 8 1.0
MCFD 62 62 29 24 49.5 80 0.8 M 24x1.5 25 11 4 8 1.0
MCFD 72 72 29 24 49.5 80 0.8 M 24x1.5 25 11 4 8 1.1
MCFD 80 80 35 30 63.0 100 1.0 M 30x1.5 32 15 4 8 1.1
MCFD 90 90 35 30 63.0 100 1.0 M 30x1.5 32 15 4 8 1.1
(1) Clamping torque is based on dry threads. If threads are lubricated, use half of value
shown.
(2) Since load, lubrication method, temperature and other factors affect the maximum
operating speed, it is impossible to determine precise limiting speed. The listed limiting
speeds are based on lightly loaded bearings having adequate lubrication and are listed
only as a design guide. More frequent relubrication is required when operating at higher
speeds. Actual bearing testing in the specific application should be conducted if the
anticipated operating speed approaches the listed limiting speed.
(3) Dynamic load should not exceed 50% of Dynamic Rating as a track roller.
(4) Static load rating is based on stud strengh or on internal rolling element load distribution
stresses.
(5) In this modification, relubrication through the flange end of the stud is not possible.
Serie MCFD - full complement of cylindrical rollers,
shielded, crowned roller diameter
For other versions add following suffix:
-B: broach slot (5)
-X: cylindrical roller diameter
(All features are to combine together)
5-11
C Clamping
torque
max (1)
Limiting speed
grease (4)
Limiting speed
oil (4)
Housing
bore dia
min
Housing
bore dia
max
dynamisch C statisch C0 dynamisch C
(3)
statisch C0
(2)
Weight
mm Nm min-1 min-1 mm mm N N N N kg
21 57 6500 8500 16 16.018 23000 27000 16000 18000 0.165
23 85 5500 7200 18 18.018 25000 31000 18000 22000 0.242
27 118 4200 5500 20 20.021 38000 48000 27000 32000 0.380
21 118 3400 4400 20 20.021 42000 57000 30000 35000 0.450
38 216 2600 3400 24 24.021 58000 76000 41000 48000 0.795
44 216 2100 2700 24 24.021 64000 89000 46000 57000 1.010
47 441 1800 2300 30 30.021 94000 129000 67000 91000 1.540
47 441 1800 2300 30 30.021 94000 129000 67000 101000 1.960
Load ratings Track roller load ratings
Pe r fec t qua l i t y and dynamic
5-12
Metric cam follower bearings
Serie MCYR - full complement, crowned roller diameter
Serie MCYRR - cage type, crowned roller diameter
For other versions add following suffix:
-S: sealing
-X: cylindrical roller dia.
(All features are to combine together)
Designation B
max
B
min
RD W
+0.00 -0.12
W1
max
W1
min
R g6
max. (1)
g6 min. (1)
h6 max. (1)
mm mm mm mm mm mm mm mm mm mm
MCYR 5 5 4.992 16 11 12 11.82 0.3 4.996 4.988 5
MCYRR 5 5 4.992 16 11 12 11.82 0.3 4.996 4.988 5
MCYR 6 6 5.992 19 11 12 11.82 0.3 5.996 5.988 6
MCYRR 6 6 5.992 19 11 12 11.82 0.3 5.996 5.988 6
MCYR 8 8 7.992 24 14 15 14.82 0.5 7.995 7.986 8
MCYRR 8 8 7.992 24 14 15 14.82 0.5 7.995 7.986 8
MCYR 10 10 9.992 30 14 15 14.82 1.0 9.995 9.986 10
MCYRR 10 10 9.992 30 14 15 14.82 1.0 9.995 9.986 10
MCYR 12 12 11.992 32 14 15 14.82 1.0 11.994 11.983 12
MCYRR 12 12 11.992 32 14 15 14.82 1.0 11.994 11.983 12
MCYR 15 15 14.992 35 18 19 18.79 1.0 14.994 14.983 15
MCYRR 15 15 14.992 35 18 19 18.79 1.0 14.994 14.983 15
MCYR 17 17 16.992 40 20 21 20.79 1.5 16.994 16.983 17
MCYRR 17 17 16.992 40 20 21 20.79 1.5 16.994 16.983 17
MCYR 20 20 19.990 47 24 25 24.79 1.5 19.993 19.980 20
MCYRR 20 20 19.990 47 24 25 24.79 1.5 19.993 19.980 20
MCYR 25 25 24.990 52 24 25 24.79 1.5 24.993 24.980 25
MCYRR 25 25 24.990 52 24 25 24.79 1.5 24.993 24.980 25
MCYR 30 30 29.990 62 28 29 28.79 1.5 29.993 29.980 30
MCYRR 30 30 29.990 62 28 29 28.79 1.5 29.993 29.980 30
MCYR 35 35 34.988 72 28 29 28.79 2.0 34.991 34.975 35
MCYRR 35 35 34.988 72 28 29 28.79 2.0 34.991 34.975 35
MCYR 40 40 39.988 80 30 32 31.75 2.0 39.991 39.975 40
MCYRR 40 40 39.988 80 30 32 31.75 2.0 39.991 39.975 40
MCYR 45 45 44.988 85 30 32 31.75 2.0 44.991 44.975 45
MCYRR 45 45 44.988 85 30 32 31.75 2.0 44.991 44.975 45
MCYR 50 50 49.988 90 30 32 31.75 2.0 44.991 49.975 50
MCYRR 50 50 49.988 90 30 32 31.75 2.0 44.991 49.975 50
(1) For loose fit for light loads, use tolerance g6.
For light transition fit for medium loads, use tolerance h6.
For a tight fit and heavy loads, use ISO tolerance j6.
(2) Since load, lubrication method, temperature and other factors affect the maximum
operating speed, it is impossible to determine precise limiting speed. The listed limiting
speeds are based on lightly loaded bearings having adequate lubrication and are listed
only as a design guide. More frequent relubrication is required when operating at higher
speeds. Actual bearing testing in the specific application should be conducted if the
anticipated operating speed approaches the listed limiting speed.
(3) Dynamic load should not exceed 50% of Dynamic Rating as a track roller.
5-13
h6 min. (1)
Clamping dia E
min.
Limiting speed
grease (2)
Limiting speed
oil (2) dynamic C static C0 dynamic C
(3)
static C0
Weight
mm mm min-1 min-1 N N N N kg
4.992 11 13000 17000 6960 8340 5790 6900 0.014
4.992 11 19500 25000 4120 4120 3430 3380 0.011
5.992 13 10500 13500 8040 10490 6670 8760 0.021
5.992 13 15500 20000 4510 5000 3730 4090 0.018
7.991 16 8400 11000 11470 15200 9610 12600 0.043
7.991 16 12500 16000 6860 7750 5690 6450 0.040
9.991 19 6400 8300 13340 18240 11080 15300 0.062
9.991 19 9600 12500 8240 9710 6860 8050 0.060
11.989 21 5400 7000 14420 20890 12060 17400 0.099
11.989 21 8100 10500 8730 10890 7260 9120 0.067
14.989 24 4200 5400 20300 34130 16970 28500 0.105
14.989 24 6300 8200 13040 19030 10890 15900 0.102
16.989 27 3300 4300 23240 38540 19420 32200 0.153
16.989 27 4900 6400 15990 23730 13340 19700 0.150
Load ratings Track roller load ratings
19.987 30 2600 3400 30790 57670 25690 48000 0.255
19.987 30 3900 5000 21280 35700 17750 29800 0.252
24.987 36 2200 2900 34130 70410 28440 58700 0.284
24.987 36 3300 4300 22950 41780 19120 34900 0.278
29.987 44 1700 2200 49720 107290 41480 89000 0.476
29.987 44 2500 3200 34040 65120 28430 54300 0.465
34.984 52 1500 1900 56880 120230 47370 100000 0.649
34.984 52 2200 2800 38930 72960 32460 60900 0.636
39.984 58 1300 1700 70020 147990 58350 123000 0.845
39.984 58 1900 2400 49720 94440 41480 787000 0.825
44.984 63 1200 1500 73750 163190 61490 136000 0.924
44.984 63 1800 2300 51190 101010 42760 84100 0.901
49.984 68 1100 1400 77180 178390 64330 148000 0.948
49.984 68 1600 2000 54720 113570 45600 94800 0.960
Pe r fec t qua l i t y and dynamic
5-14
Metric cam follower bearings
Serie MCYRD - full complement of cylindrical rollers,
shielded, crowned roller diameter
For other versions add following suffix:
-X: cylindrical roller diameter
Designation B
max
B
min
RD W
+0.00 -0.12
W1
max
W1
min
Ro Ri
mm mm mm mm mm mm mm mm
MCYRD 15 15 14.992 35 18 19 18.79 0.6 0.3
MCYRD 17 17 16.992 40 20 21 20.79 1.0 0.3
MCYRD 20 20 19.990 47 24 25 24.79 1.0 0.3
MCYRD 25 25 24.990 52 24 25 24.79 1.0 0.3
MCYRD 30 30 29.990 62 28 29 28.79 1.0 0.3
MCYRD 35 35 34.988 72 28 29 28.79 1.1 0.6
MCYRD 40 40 39.988 80 30 32 31.75 1.1 0.6
MCYRD 45 45 44.988 85 30 32 31.72 1.1 0.6
MCYRD 50 50 49.998 90 30 32 31.75 1.1 0.6
(1) Dynamic load should not exceed 50% of Dynamic Rating as a track roller.
(2) Since load, lubrication method, temperature and other factors affect the maximum
operating speed, it is impossible to determine precise limiting speed. The listed limiting
speeds are based on lightly loaded bearings having adequate lubrication and are listed
only as a design guide. More frequent relubrication is required when operating at higher
speeds. Actual bearing testing in the specific application should be conducted if the
anticipated operating speed approaches the listed limiting speed.
5-15
E
dynamic C static C0 dynamic C
(2)
static C0
Limiting speed
(1 )
Weight
mm N N N N min-1 kg
20 23000 27000 16000 18000 6500 0.099
22 25000 31000 18000 22000 5500 0.147
27 38000 48000 27000 32000 4200 0.245
31 42000 57000 30000 35000 3400 0.281
38 58000 76000 41000 47000 2600 0.465
44 64000 89000 46000 57000 2100 0.630
51 89000 130000 64000 71000 1600 0.816
55 94000 143000 67000 72000 1400 0.883
60 99000 156000 71000 77000 1300 0.950
Load ratings Track roller load ratings
Pe r fec t qua l i t y and dynamic
Standard P. 6-2
Flange P. 6-6
Topball P. 6-14
Block P. 6-16
Slide bushes
closed clearance adjustable open double-wide
round flange
round flange
double-wide
center mount
round flange
square flange
square flange
double-wide
center mount
square flange
two side
cut flange
block
double-wide block
open block
double-wide
open block
open block
with adjustable clearance
double-wide open block
with adjustable clearance
closed open
S
li d e b u s h e s Pe r fec t qua l i t y and dynamic
Slide bushes
6-2
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KB-AJ
clearance adjustable
KB = steel with steel retainer without seal
G = resin retainer
U = seal on one side
UU = seals on both sides
KB 5 KB 5G 5 8 0 12 0 -8 22 0 -0.20
KB 8 KB 8G 8 8 0 16 0 -8 25 0 -0.20
KB 10 KB 10G 10 8 0 19 0 -9 29 0 -0.20
KB 12 KB 12G 12 8 0 22 0 -9 32 0 -0.20
KB 16 KB 16G 16 9 -1 26 0 -9 36 0 -0.20
KB 20 KB 20G 20 9 -1 32 0 -11 45 0 -0.30
KB 25 KB 25G 25 11 -1 40 0 -11 58 0 -0.30
KB 30 KB 30G 30 11 -1 47 0 -11 68 0 -0.30
KB 40 KB 40G 40 13 -1 62 0 -13 80 0 -0.30
KB 50 KB 50G 50 13 -2 75 0 -13 100 0 -0.30
KB 60 KB 60G 60 13 -2 90 0 -15 125 0 -0.40
KB 5G-AJ 5 8 0 12 0 -8 22 0 -0.20
KB 8G-AJ 8 8 0 16 0 -8 25 0 -0.20
KB 10G-AJ 10 8 0 19 0 -9 29 0 -0.20
KB 12-AJ KB 12G-AJ 12 8 0 22 0 -9 32 0 -0.20
KB 16-AJ KB 16G-AJ 16 9 -1 26 0 -9 36 0 -0.20
KB 20-AJ KB 20G-AJ 20 9 -1 32 0 -11 45 0 -0.30
KB 25-AJ KB 25G-AJ 25 11 -1 40 0 -11 58 0 -0.30
KB 30-AJ KB 30G-AJ 30 11 -1 47 0 -11 68 0 -0.30
KB 40-AJ KB 40G-AJ 40 13 -1 62 0 -13 80 0 -0.30
KB 50-AJ KB 50G-AJ 50 13 -2 75 0 -13 100 0 -0.30
KB 60-AJ KB 60G-AJ 60 13 -2 90 0 -15 125 0 -0.40
Standard
KB
closed
KB = steel with steel retainer without seal
G = resin retainer
U = seal on one side
UU = seals on both sides
6-3
Tolerance Load rating
B B + B - W D1 Eccentricity Radial
clearance max.
dynamic C static C0 Weight
mm mm mm mm mm µm µm N N g
Tolerance Load rating
B B + B - W D1 h Eccentricity dynamic C static C0 Weight
mm mm mm mm mm mm µm N N g
14.5 0 -0.2 1.10 11.5 12 -3 206 265 11
16.5 0 -0.2 1.10 15.2 12 -3 265 402 22
22.0 0 -0.2 1.30 18.0 12 -4 372 549 36
22.9 0 -0.2 1.30 21.0 12 -4 510 784 45
24.9 0 -0.2 1.30 24.9 12 -4 578 892 60
31.5 0 -0.3 1.60 30.5 15 -6 862 1370 102
44.1 0 -0.3 1.85 38.0 15 -6 980 1570 235
52.1 0 -0.3 1.85 44.5 15 -8 1570 2740 360
60.6 0 -0.3 2.15 59.0 17 -8 2160 4020 770
77.6 0 -0.3 2.65 72.0 17 -13 3820 7940 1250
101.7 0 -0.4 3.15 86.5 20 -13 4700 9800 2220
14.5 0 -0.2 1.10 11.5 1.0 12 206 265 10.0
16.5 0 -0.2 1.10 15.2 1.0 12 265 402 19.5
22.0 0 -0.2 1.30 18.0 1.0 12 372 549 29.0
22.9 0 -0.2 1.30 21.0 1.5 12 510 784 44.0
24.9 0 -0.2 1.30 24.9 1.5 12 578 892 59.0
31.5 0 -0.3 1.60 30.5 2.0 15 862 1370 100.0
44.1 0 -0.3 1.85 38.0 2.0 15 980 1570 230.0
52.1 0 -0.3 1.85 44.5 2.0 15 1570 2740 355.0
60.6 0 -0.3 2.15 59.0 3.0 17 2160 4020 758.0
77.6 0 -0.3 2.65 72.0 3.0 17 3820 7940 1230.0
101.7 0 -0.4 3.15 86.5 3.0 20 4700 9800 2170.0
Pe r fec t qua l i t y and dynamic
Slide bushes
6-4
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KB-W
double-wide
KB = steel with steel retainer without seal
G = resin retainer
U = seal on one side
UU = seals on both sides
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KB-OP
open
KB = steel with steel retainer without seal
G = resin retainer
U = seal on one side
UU = seals on both sides
KB 12-OP KB 12G-OP 12 8 0 22 0 -9 32 0 -0.20
KB 16-OP KB 16G-OP 16 9 -1 26 0 -9 36 0 -0.20
KB 20-OP KB 20G-OP 20 9 -1 32 0 -11 45 0 -0.30
KB 25-OP KB 25G-OP 25 11 -1 40 0 -11 58 0 -0.30
KB 30-OP KB 30G-OP 30 11 -1 47 0 -11 68 0 -0.30
KB 40-OP KB 40G-OP 40 13 -1 62 0 -13 80 0 -0.30
KB 50-OP KB 50G-OP 50 13 -2 75 0 -13 100 0 -0.30
KB 60-OP KB 60G-OP 60 13 -2 90 0 -15 125 0 -0.40
KB 8W KB 8GW 8 9 -1 16 0 -9 45 0 -0.3
KB 12W KB 12GW 12 9 -1 22 0 -11 57 0 -0.3
KB 16W KB 16GW 16 11 -1 26 0 -11 70 0 -0.3
KB 20W KB 20GW 20 11 -1 32 0 -13 80 0 -0.3
KB 25W KB 25GW 25 13 -2 40 0 -13 112 0 -0.4
KB 30W KB 30GW 30 13 -2 47 0 -13 123 0 -0.4
KB 40W KB 40GW 40 13 -4 62 0 -9 154 0 -0.4
KB 50W KB 50GW 50 13 -4 75 0 -9 192 0 -0.4
KB 60W KB 60GW 60 13 -4 90 0 -11 211 0 -0.4
6-5
Tolerance Load rating
B B + B - W D1 h u Eccentricity dynamic C static C0 Weight
mm mm mm mm mm mm ~° µm N N g
Tolerance Load rating Rated staticic
B B + B - W D1 Eccentricity dynamic C static C0 moment Mo Weight
mm mm mm mm mm µm N N Nm g
22.9 0 -0.2 1.30 21.0 12 -7 410 590 41 35
24.9 0 -0.2 1.30 24.9 12 -7 770 1170 65 48
31.5 0 -0.3 1.60 30.5 15 -9 860 1370 91 84
44.1 0 -0.3 1.85 38.0 15 -9 980 1570 215 195
52.1 0 -0.3 1.85 44.5 15 -9 1560 2740 325 309
60.6 0 -0.3 2.15 59.0 17 -13 2150 4010 705 665
77.6 0 -0.3 2.65 72.0 17 -13 3820 7930 1130 1080
101.7 0 -0.4 3.15 86.5 20 -16 4700 9990 2220 1900
33.0 0 -0.3 1.10 15.2 15 421 804 4.3 40
45.8 0 -0.3 1.30 21.0 15 813 1570 11.7 80
49.8 0 -0.3 1.30 24.9 15 921 1780 14.2 115
61.0 0 -0.3 1.60 30.5 17 1370 2740 25.0 180
82.0 0 -0.4 1.85 38.0 17 1570 3140 44.0 430
104.2 0 -0.4 1.85 44.5 17 2500 5490 78.9 615
121.2 0 -0.4 2.15 59.0 20 3430 8040 147.0 1400
155.2 0 -0.4 2.65 72.0 20 6080 15900 396.0 2320
170.0 0 -0.4 3.15 86.5 25 7550 20000 487.0 3920
Pe r fec t qua l i t y and dynamic
Slide bushes
6-6
Flange
KBF
round flange
KBF = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
Outer cylinder surface treatment on request
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
Outer cylinder surface treatment on request
KBF 8 KBF 8G 8 8 0 16 0 -13 25 0.3 -0.3
KBF 12 KBF 12G 12 8 0 22 0 -16 32 0.3 -0.3
KBF 16 KBF 16G 16 9 -1 28 0 -16 36 0.3 -0.3
KBF 20 KBF 20G 20 9 -1 32 0 -19 45 0.3 -0.3
KBF 25 KBF 25G 25 11 -1 40 0 -19 58 0.3 -0.3
KBF 30 KBF 30G 30 11 -1 47 0 -19 66 0.3 -0.3
KBF 40 KBF 40G 40 13 -2 62 0 -22 80 0.3 -0.3
KBF 50 KBF 50G 50 13 -2 75 0 -22 100 0.3 -0.3
KBF 60 KBF 60G 60 13 -2 90 0 -25 125 0.3 -0.3
KBK 8 KBK 8G 8 8 0 16 0 -13 25 0.3 -0.3
KBK 12 KBK 12G 12 8 0 22 0 -16 32 0.3 -0.3
KBK 16 KBK 16G 16 9 -1 28 0 -16 36 0.3 -0.3
KBK 20 KBK 20G 20 9 -1 32 0 -19 45 0.3 -0.3
KBK 25 KBK 25G 25 11 -1 40 0 -19 58 0.3 -0.3
KBK 30 KBK 30G 30 11 -1 47 0 -19 66 0.3 -0.3
KBK 40 KBK 40G 40 13 -2 62 0 -22 80 0.3 -0.3
KBK 50 KBK 50G 50 13 -2 75 0 -22 100 0.3 -0.3
KBK 60 KBK 60G 60 13 -2 90 0 -25 125 0.3 -0.3
KBK
square flange
KBK = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides
mounting holes x 4
mounting holes x 4
6-7
Load rating
Df t P.C.D. XxYxZ Eccentricity Perpendicularity dynamic C static C0 Weight
mm mm mm mm µm µm N N g
Load rating
Df K t P.C.D. XxYxZ Eccentricity Perpendicularity dynamic C static C0 Weight
mm mm mm mm mm µm µm N N g
32 5 24 3.5 x 6 x 3.1 12 12 265 402 41.0
42 6 32 4.5 x 7.5 x 4.1 12 12 510 784 80.0
46 6 36 4.5 x 7.5 x 4.1 12 12 578 892 103.0
54 8 43 5.5 x 9 x 5.1 15 15 862 1370 182.0
62 8 51 5.5 x 9 x 5.1 15 15 980 1570 335.0
76 10 62 6.6 x 11 x 6.1 15 15 1570 2740 560.0
98 13 80 9 x14 x 8.1 17 17 2160 4020 1175.0
112 13 94 9 x14 x 8.1 17 17 3820 7940 1745.0
134 18 112 11 x 17 x 11.1 20 20 4700 9800 3220.0
32 25 5 24 3.5 x 6 x 3.1 12 12 265 402.0 41
42 32 6 32 4.5 x 7.5 x 4.1 12 12 510 784.0 80
46 35 6 36 4.5 x 7.5 x 4.1 12 12 578 892.0 103
54 42 8 43 5.5 x 9 x 5.1 15 15 862 1370.0 182
62 50 8 51 5.5 x 9 x 5.1 15 15 980 1570.0 335
76 60 10 62 6.6 x 11 x 6.1 15 15 1570 2740.0 560
98 75 13 80 9 x14 x 8.1 17 17 2160 4020.0 1175
112 88 13 94 9 x14 x 8.1 17 17 3820 7940.0 1745
134 106 18 112 11 x 17 x 11.1 20 20 4700 9800.0 3220
Pe r fec t qua l i t y and dynamic
Slide bushes
6-8
KBT
two side cut flange
KBT = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides (standard)
KBF-W
round flange double-wide
KBF = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides
Outer cylinder surface treatment on request
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KBF 8W KBF 8GW 8 9 0 16 0 -13 45 0.3 -0.3
KBF 12W KBF 12GW 12 9 0 22 0 -16 57 0.3 -0.3
KBF 16W KBF 16GW 16 11 -1 28 0 -16 70 0.3 -0.3
KBF 20W KBF 20GW 20 11 -1 32 0 -19 80 0.3 -0.3
KBF 25W KBF 25GW 25 13 -2 40 0 -19 112 0.3 -0.3
KBF 30W KBF 30GW 30 13 -2 47 0 -19 123 0.3 -0.3
KBF 40W KBF 40GW 40 16 -4 62 0 -22 154 0.3 -0.3
KBF 50W KBF 50GW 50 16 -4 75 0 -22 192 0.3 -0.3
KBF 60W KBF 60GW 60 16 -4 90 0 -25 211 0.3 -0.3
Outer cylinder surface treatment on request
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KBT 8UU KBT 8GUU 8 8 0 16 0 -13 25 0.3 -0.3
KBT 12UU KBT 12GUU 12 8 0 22 0 -16 32 0.3 -0.3
KBT 16UU KBT 16GUU 16 9 -1 26 0 -16 36 0.3 -0.3
KBT 20UU KBT 20GUU 20 9 -1 32 0 -19 45 0.3 -0.3
KBT 25UU KBT 25GUU 25 11 -1 40 0 -19 58 0.3 -0.3
KBT 30UU KBT 30GUU 30 11 -1 47 0 -19 68 0.3 -0.3
mounting
holes x 4
mounting
holes x 2
mounting
holes x 4
KBT 16 or larger KBT 12 or smaller
6-9
Load rating
Df t P.C.D. XxYxZ Eccentricity Perpendicularity dynamic C static C0 Weight
mm mm mm mm µm µm N N g
32 5 24 3.5 x 6.5 x 3.1 15 15 421 804 59
42 6 32 4.5 x 8 x 4.1 15 15 813 1570 110
46 6 36 4.5 x 8 x 4.1 15 15 921 1780 160
54 8 43 5.5 x 9.5 x 5.1 17 17 1370 2740 260
62 8 51 5.5 x 9.5 x 5.1 17 17 1570 3140 540
76 10 62 6.6 x 11 x 6.1 17 17 2500 5490 815
98 13 80 9 x14 x 8.1 20 20 3430 8040 1805
112 13 94 9 x14 x 8.1 20 20 6080 15900 2820
134 18 112 11 x 17.5 x 11.1 25 25 7550 20000 4920
Load rating
Df W t A F XxYxZ Eccentricity Perpendicularity
dynamic C static C0 Weight
mm mm mm mm mm mm µm µm N N g
32 22 5 24  3.5 x 6 x 3.1 12 12 265.0 402 37
42 28 6 32  4.5 x 7.5 x 4.1 12 12 510.0 784 73
46 32 6 28 22 4.5 x 7.5 x 4.2 12 12 578.0 892 90
54 38 8 36 24 5.5 x 9 x 5.1 15 15 862.0 1370 155
62 46 8 40 32 5.5 x 9 x 5.1 15 15 980.0 1570 297
76 53 10 48 38 6.6 x 11 x 6.1 15 15 1570.0 2740 471
Pe r fec t qua l i t y and dynamic
Slide bushes
6-10
Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KBK 8W KBK 8GW 8 9 -1 16 0 -13 45 0.3 -0.3
KBK 12W KBK 12GW 12 9 -1 22 0 -16 57 0.3 -0.3
KBK 16W KBK 16GW 16 11 -1 28 0 -16 70 0.3 -0.3
KBK 20W KBK 20GW 20 11 -1 32 0 -19 80 0.3 -0.3
KBK 25W KBK 25GW 25 13 -2 40 0 -19 112 0.3 -0.3
KBK 30W KBK 30GW 30 13 -2 47 0 -19 123 0.3 -0.3
KBK 40W KBK 40GW 40 16 -4 62 0 -22 151 0.3 -0.3
KBK 50W KBK 50GW 50 16 -4 75 0 -22 192 0.3 -0.3
KBK 60W KBK 60GW 60 16 -4 90 0 -25 211 0.3 -0.3
Oberflächenbehandlung Außenzylinder auf Anfrage
KBFC 8 KBFC 8G 8 9 -1 16 0 -13 46 0.3 -0.3
KBFC 12 KBFC 12G 12 9 -1 22 0 -16 61 0.3 -0.3
KBFC 16 KBFC 16G 16 11 -1 26 0 -16 68 0.3 -0.3
KBFC 20 KBFC 20G 20 11 -1 32 0 -19 80 0.3 -0.3
KBFC 25 KBFC 25G 25 13 -2 40 0 -19 112 0.3 -0.3
KBFC 30 KBFC 30G 30 13 -2 47 0 -19 123 0.3 -0.3
KBFC 40 KBFC 40G 40 16 -4 62 0 -22 154 0.3 -0.3
KBFC 50 KBFC 50G 50 16 -4 75 0 -22 192 0.3 -0.3
KBFC 60 KBFC 60G 60 16 -4 90 0 -25 211 0.3 -0.3
Outer cylinder surface treatment on request
KBK-W
square flange double-wide
KBK = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides
Tolerance Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KBFC
center mount round flange
KBFC = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides
mounting
holes x 4
mounting
holes x 4
6-11
Load rating
Df K t P.C.D. XxYxZ Eccentricity Perpendicularity
dynamic C static C0 Weight
mm mm mm mm mm µm µm N N g
32 25 5 24 3.5 x 6.5 x 3.1 15 15 421 804 51
42 32 6 32 4.5 x 8 x 4.1 15 15 813 1570 90
46 35 6 36 4.5 x 8 x 4.1 15 15 921 1780 135
54 42 8 43 5.5 x 9.5 x 5.1 17 17 1370 2740 225
62 50 8 51 5.5 x 9.5 x 5.1 17 17 1570 3140 500
76 60 10 62 6.6 x 11 x 6.1 17 17 2500 5490 720
98 75 13 80 9 x14 x 8.1 20 20 3430 8040 1600
112 88 13 94 9 x14 x 8.1 20 20 6080 15900 2620
134 105 18 112 11 x 17 x 11.1 25 25 7550 20000 4480
20.5 32 5 24 3.5 x 6.5 x 3.1 15 15 421 804 59
27.5 42 6 32 4.5 x 8 x 4.1 15 15 813 1570 110
31.0 46 6 36 4.5 x 8 x 4.1 15 15 921 1780 160
36.0 54 8 43 5.5 x 9.5 x 5.1 17 17 1370 2740 260
52.0 62 8 51 5.5 x 9.5 x 5.1 17 17 1570 3140 540
56.5 76 10 62 6.6 x 11 x 6.1 17 17 2500 5490 815
69.0 98 13 80 9 x14 x 8.1 20 20 3430 8040 1805
89.5 112 13 94 9 x14 x 8.1 20 20 6080 15900 2820
95.5 134 18 112 11 x 17.5 x 11.1 25 25 7550 20000 4920
Load rating
l Df t P.C.D. XxYxZ Eccentricity Perpendicularity
dynamic C static C0 Weight
mm mm mm mm mm µm µm N N g
Pe r fec t qua l i t y and dynamic
Slide bushes
6-12
Tolerance Tolerance Tolerance Tolerance Tolerance Tolerance
Designation d d + d - D D + D - L L + L mm µm µm mm µm µm mm mm mm
KBKC 8 KBKC 8G 8 9 -1 16 0 -13 46 0.3 -0.3
KBKC 12 KBKC 12G 12 9 -1 22 0 -16 61 0.3 -0.3
KBKC 16 KBKC 16G 16 11 -1 26 0 -16 68 0.3 -0.3
KBKC 20 KBKC 20G 20 11 -1 32 0 -19 80 0.3 -0.3
KBKC 25 KBKC 25G 25 13 -2 40 0 -19 112 0.3 -0.3
KBKC 30 KBKC 30G 30 13 -2 47 0 -19 123 0.3 -0.3
KBKC 40 KBKC 40G 40 16 -4 62 0 -22 154 0.3 -0.3
KBKC 50 KBKC 50G 50 16 -4 75 0 -22 192 0.3 -0.3
KBKC 60 KBKC 60G 60 16 -4 90 0 -25 211 0.3 -0.3
Outer cylinder surface treatment on request
KBKC
center mount square flange
KBKC = steel with steel retainer without seal
G = resin retainer
UU = seals on both sides
mounting
holes x 4
6-13
Load rating
l Df K t P.C.D. XxYxZ Eccentricity
Perpendicularity
dynamic C static C0 Weight
mm mm mm mm mm mm µm µm N N g
20.5 32 25 5 24 3.5 x 6.5 x 3.1 15 15 421 804 51
27.5 42 32 6 32 4.5 x 8 x 4.1 15 15 813 1570 90
31.0 46 35 6 36 4.5 x 8 x 4.1 15 15 921 1780 135
36.0 54 42 8 43 5.5 x 9.5 x 5.1 17 17 1370 2740 225
52.0 62 50 8 51 5.5 x 9.5 x 5.1 17 17 1570 3140 500
56.5 76 60 10 62 6.6 x 11 x 6.1 17 17 2500 5490 720
69.0 98 75 13 80 9 x14 x 8.1 20 20 3430 8040 1600
89.5 112 88 13 94 9 x14 x 8.1 20 20 6080 15900 2620
95.5 134 106 18 112 11 x 17.5 x 11.1 25 25 7550 20000 4480
Pe r fec t qua l i t y and dynamic
For your notes
For your notes
Sales Terms and Conditions
1. Scope
Our offers, deliveries and other services shall be made exclusively on the basis
of the subsequent Sales and Delivery Terms and Conditions. Contrary or deviating general terms and conditions of the purchaser will not be recognised by us
unless their application has been explicitly approved by us in writing. This
applies also if we carry out the delivery without reservation while knowing of the
existence of contrary or deviating general terms and conditions of the purchaser.
Our General Sales and Delivery Terms and Conditions are valid also for all future transactions with the purchaser without that we are obliged to point out to
this circumstance separately.
2. Offer and Contract Conclusion
Our offers of delivery and prices are not binding and without engagement.
In case of individual orders with a net order value of up to EUR 400 we will charge in addition the following cost for order processing:
up to EUR 100: EUR 20,00
up to EUR 150: EUR 15,00
up to EUR 400: EUR 10,00
In case of purchase orders or other orders a contract conclusion occurs only if
we have agreed to the contract offer in writing. Our approval is decisive for type
and extent of the performance as well as for orderly processing and fulfilment
of the contract.
3. Execution of Contract
The purchaser is obliged to inform us unsolicitedly about any legal, official and
other regulations which due to special circumstances must be observed during
contract execution. The same applies to other special circumstance in individual cases which might lead to an impediment in contract execution. We are
entitled to modifications in design or production of our products to the extent
that these are minor modifications or deviations customary in trade and these
are reasonable for the purchaser by taking into account our interests. A standard for reasonableness are on the part of the purchaser the effects on the
value and operativeness of the products, on our part technical requirements, in
particular production technique requirements. Tolerances in quantity usual in
trade of up to +/- 10% are admissible.
In case of sample and special productions beyond our current delivery
programme we will invoice additional tools cost pro rata.
We are entitled to make partial deliveries which can be invoiced separately by
us.
We reserve property rights and copyrights in illustrations, drawings, calculations and other documents. These must not be made available to third parties.
4. Prices
Unless different stipulations are being made, our list prices at the time of contract conclusion are applicable.
If in commercial dealings we perform pursuant to contract later than six weeks,
the list prices at the time of performance, in particular the date of delivery are
applicable.
Unless a different explicit stipulation has been made, our prices are net prices,
ex works and do not include additional charges such as packing, transport and
insurance. Legal value added tax is not included in the prices; it shall be established separately on the invoice in legal amount on the day of invoicing.
We reserve to modify our prices which are based upon material, wage and energy cost at the time of submission of our offer, if individual or all of these cost
factors are increased during the time period between contract conclusion on
the one hand and delivery or performance on the other hand pursuant to the
effects of the modification of the above mentioned cost factors on the price. If
the purchaser is a nontrader, price modifications within this meaning are only
admissible, if at least four months have passed between contract conclusion
and delivery /performance.
5. Payment Terms, Default
Our invoices have to be paid within 14 calendar days as from date of invoice
net. Taxes, customs duties and charges levied upon us shall be reimbursed to
us immediately by the Purchaser.
If the purchaser defaults, we are entitled to charge default interest in the amount
of 5% above the respective basic interest rate of the European Central Bank.
Both contracting parties reserve definite evidence of a higher or lower damage.
If after contract conclusion it becomes evident that our payment claim is jeopardized by insufficient solvency of the Purchaser, we shall be entitled to the
rights of § 321 BGB (defence of uncertainty). We shall then also be entitled to
fix a due date for all claims out of the current business relationship with the
Purchaser not barred by the statute of limitations. Moreover the defence of
uncertainty includes all further supplies and performances out of the business
relationship with the Purchaser.
The Purchaser is entitled to offset only if his counterclaims have legal force, are
indisputable or are recognized by us. This is true also for an eventual lien to the
extent that its counterclaim is not based upon the same contractual relationship.
6. Delivery, Force Majeure, Self-Delivery Reservation, Default
Our delivery dates are planned dates. Even firmly stipulated delivery terms are
not fixed dates (§§ 361 BGB/German Civil Code, 376 HGB/German Civil Code
of Commerce) unless explicitly being designated as fixed dates. If we cannot
make delivery within an agreed upon delivery term or at an agreed upon delivery date, the purchaser will give us an additional period of at least three weeks.
The purchaser can give us a shorter additional period only if circumstances
exist which make an additional period of three weeks unacceptable for the purchaser and which had been recognizable for us at contract conclusion. The circumstance alone that the parties have agreed upon a binding delivery time is
not sufficient for it. Only after expiration of the additional period the purchaser
can derive rights from the delay.
In case of an explicit written designation of a delivery term as binding, the delivery time shall start as soon as all details of execution have been clarified and
both parties have agreed upon all conditions of contract conclusion and contract execution. Binding delivery times are being observed by handing over of
the products for transport.
Our obligation for delivery is suspended as long as the purchaser is in default
with an obligation existing towards us.
Events of Force Majeure as well as other unforeseen events, including but not
limited to interruptions in procurement, employment, production and delivery
with us or our sub-suppliers which regarding duration cannot be predicted or
prevented by us, release us from our delivery obligation for the duration of the
interruption as well as a certain setup time and in the scope of its effect - also
during an already existing delay - unless the interruption has been caused by
us with malice aforethought or gross negligence.
If due to Force Majeure or other unforeseen events for which we are not
responsible, it should be impossible for us to make delivery within a reasonable period of time, the purchaser as well as we have the right to withdraw from
contract wholly or in part. The same applies in case of subsequent
impossibility of performance of contract for which we are not responsible.
Damage claims due to such a rescission do not exist.
If the party entitled to rescission wants to make use of his right of rescission, he
must communicate it immediately after learning of the purport of the event.
Damage claims by the purchaser are excluded.
The same applies if approvals by authorities and other approvals by third parties necessary for the performance of deliveries and documents are not received in time. In case of subsequent modification of the order or notification of
data necessary for execution of the delivery by the purchaser which did not arrive in time, an adequate prolongation of the delivery term occurs as well.
We are released from our delivery obligation if without our fault we are not delivered in time with the correct goods ordered for fulfilment of the delivery contract.
In case of delayed delivery or impossibility of performance for which we are
responsible, we are liable for indemnity under the following restrictions unless
we are charged with malice aforethought or gross negligence:
- in case of delayed delivery the purchaser in the event of loss may be entitled
to a compensation of 0.5% max. of the price of the outstanding delivery for
each full week of delay but in total not more than 30% of the net value of the
outstanding delivery or 10% of the total net order value;
- an eventual damage claim for non-performance is limited to indemnification of
such damages which we ought to have predicted as a possible consequence
of contract violation on contract conclusion due to circumstances recognizable by us (damages typical of contract). In case of negligence which is not
gross negligence the liability is restricted to 50% of the damage occurred.
Further claims out of default in delivery are solely governed by item 11 of the
present Sales and Delivery Terms and Conditions.
7. Shipment, Passing of Risk, Transport Insurance
Shipment shall be made at the expense of the purchaser.
The risk of incidental destruction and incidental deterioration passes onto the
purchaser as soon as the products have been handed over to him or the person
designated for execution of the delivery but not later than on leaving our works,
our business or storage premises even if we have assumed delivery, if partial deliveries occur or if we have assumed other performances as well. If shipment is
delayed for reasons for which we are not responsible or due to a behaviour of the
purchaser, the risk passes onto the purchaser at the time when we have informed him about the readiness for shipment of the goods.
We are entitled but not obliged to effect transport insurance to the extent usual
in trade at the expense of the purchaser unless specific instructions by the purchaser have been submitted to us which must have been communicated to us in
time before the beginning of transport, if need be.
Unless the purchaser has given instructions to the contrary, we shall determine the medium of transport, the routing and the transport insurance without
being responsible for the fact that the most rapid or the cheapest possibility is
being chosen.
In case of damage or loss of the products during transport, the purchaser must
cause immediately a fact finding at the carrier.
8. Obligation of Acceptance, Non-performance
The provisions on debtor's delay apply to the acceptance obligation of the purchaser. If according to these we are entitled to indemnity for non-performance,
we are authorized to request a lump sum indemnity of 20% of the respective
net invoice value subject to the evidence of a higher or lower damage to which
both parties are entitled.
If we are obliged to delivery on call, deliveries must be called not later than within one year as from order date unless otherwise specified. If no call ismade
within the time period mentioned, paragraph 1 is applicable accordingly.
Pe r fec t qua l i t y and dynamic
Sales Terms and Conditions
Version: 01/2012
9. Retention of Title
1) All goods delivered remain our property (goods under retention of title) until
payment of all debts including but not limited to the respective balance claims
to which we are entitled within the scope of the business relationship (balance
reservation) and the claims which are established unilaterally by the administrator by way of the choice of performance. This applies also to future and conditional claims such as for example out of acceptor‘s bills of exchange and also
if payments are made for especially designated debts. This balance reservation
expires definitively with payment of all claims still open at the time of payment
and covered by this balance reservation.
2) Treatment and processing of the goods under retention of title are made for
us as a manufacturer within the meaning of § 950 BGB without binding us. The
treated and processed goods are considered to be goods under retention of
title within the meaning of no. 1. In case of processing, combination and mixing
of the goods under retention of title with other goods by the Purchaser we shall
be entitled to joint ownership pro rata in the new item in the ratio of the invoice
value of the goods under retention of title to the invoice value of the other goods
used. If our ownership expires by combination or mixing, the Purchaser assigns
already now the property rights in the new possession or item to which he is
entitled to us in the order of the invoice value of the goods under retention of
title and holds them in custody for us. Our joint ownership rights are deemed to
be goods under retention of title within the meaning of no. 1.
3) The Purchaser shall be allowed to sell the goods under retention of title only
in normal dealings at his normal general terms and conditions and unless he is
in default provided that the claims from further sale pursuant to nos. 4 to 6 are
transferred to us. He shall not be entitled to any other provisions regarding the
goods under retention of title.
4) The claims from further sale of the goods under retention of title together with
all securities the Purchaser obtains for the claim are already now assigned to us.
They serve as a security to the same extent as the goods under retention of title.
If the goods under retention of title are sold by the Purchaser together with other
goods not sold by us, the claim from resale is assigned to us in the ratio of the
invoice value of the goods under retention of title to the invoice value of the other
goods sold. When goods are sold in which we have joint ownership pursuant
to no. 2, a share corresponding to our joint ownership shall be assigned to us.
If the goods under retention of title are used by the Purchaser for fulfilment of a
contract for work and service, the claim out of the contract for work and service
shall be assigned to us in advance to the same extent.
5) The Purchaser shall be entitled to collect debts from resale. This authority to
collect expires if revoked by us but in case of delay of payment, dishonouring of
a bill of exchange or petition for opening of insolvency proceedings at the latest.
We shall make use of our right of cancellation only if after conclusion of contract
it becomes evident that our payment claim out of the present contract or other
contracts with the Purchaser is jeopardized by his insufficient solvency. On our
request the Purchaser shall be obliged to inform his customers immediately of
the assignment to us and to transmit to us the documents required for collection.
6) An assignment of claims from resale is inadmissible unless it is an assignment
by way of genuine factoring which is indicated to us and for which the factoring
proceeds exceeds the value of our secured claim. With crediting of the factoring
proceeds our claim becomes immediately due.
7) The Purchaser has to inform us immediately on an attachment or other prejudice by third parties. The Purchaser shall bear all costs incurred for cancellation
of the seizure or return transport of the goods under retention of title unless
these are reimbursed by third parties.
8) If the Purchaser defaults or does not honour a bill of exchange on maturity, we
shall be entitled to take back the goods under retention of title and if necessary
enter the premises of the Purchaser for such purpose. The same applies if after
contract conclusion it becomes evident that our payment claim out of the present contract or out of other contracts with the Purchaser is jeopardized by his
insufficient solvency. Taking back the goods shall not be deemed to be a withdrawal from contract. Provisions of the insolvency regulation remain unaffected.
9) If the invoice value of the existing securities exceeds the secured claims including accessory claims (interest, cost and similar) in total by more than 50 %
we are obliged to release securities upon request by the Purchaser to that extent
according to our selection.
10. Express Warranty
The Purchaser must inspect the goods supplied immediately after receipt and
prior to further processing. Objections for incomplete or incorrect delivery or
claims for obvious defects must be notified to us in writing not later than eight
days after receipt of the goods. Other defects must be notified to us in writing
immediately after detection but not later than within eight days. In case of late
notification of a defect warranty rights supported on it are excluded in commercial dealings. Warranty rights by the Purchaser moreover require that he has
duly fulfilled the inspection and claim duties owed pursuant to statutory provisions. In case of damages in transport the Purchaser must immediately cause
the fact finding at the railway or postal authorities to be established. All those
parts have to be repaired or newly delivered upon discretion of the supplier
free of charge which turn out to be defective due to a circumstance prior to the
passing of risk. Determination of such defects must be notified to the Supplier
immediately in writing. Replaced parts become the property of the Supplier.
In order to carry out the rework and replacement deliveries which appear
to be necessary to the Supplier, the Purchaser must give the required time
and opportunity in agreement with the Supplier; otherwise the Supplier shall
be released from liability for the resulting consequences. Only in urgent cases
of endangerment of the operational safety and/or defence of disproportionately great damages with the Supplier having to be informed immediately the
Purchaser shall have the right to eliminate the defect himself or have it eliminated by third parties and to request reimbursement of the required expenditure
by the Supplier.
Of the cost incurred by the rework and/or replacement delivery the Supplier
shall bear the cost of the replacement part - if the claim turns out to have been
justified - including shipment as well as the adequate cost of disassembly and
assembly, moreover, if on a case to case basis this may be reasonably requested, the cost of an eventually necessary supply of his erectors and support
people.
Within the scope of statutory provisions the Purchaser is entitled to withdraw
from contract, if the Supplier - taking into account the statutory exceptions - lets
expire an adequate delay for rework or replacement delivery due to a redhibitory
defect without curing it. If only a minor defect is concerned, the Purchaser shall
only be entitled to reduce the contract price. The right to reduce the contract
price otherwise remains excluded.
No warranty shall be given especially in the following cases:
Inappropriate or improper use, defective assembly and/or commissioning by
the Purchaser or third parties, natural wear and tear, defective or negligent
treatment, improper maintenance, inappropriate consumables, insufficient construction work, improper building ground, chemical, electro-chemical or electric
influences - unless the Supplier is responsible for them.
If the Purchaser or a third party carries out rework in an improper way, the Supplier shall not be responsible for the resulting consequences.
The same applies to modifications of the delivery object carried out without prior
approval by the Supplier.
11. General Limitation of Liability
1) With respect to violation of contractual and extra-contractual obligations including but not limited to impossibility, default, fault during contract introduction
and personal tort we shall only be responsible - also for our executives and other
vicarious agents - in case of intent and gross negligence limited to the damage
foreseeable on contract conclusion and typical of contract.
2) These limitations do not apply in case of infringement of major contract duties on fault in so far as achievement of the contract purpose is jeopardized, in
cases of mandatory liability in accordance with the product liability law, in case
of damages to life, body and health and if and in so far as we have fraudulently
concealed defects of the item or have guaranteed their absence. Provisions on
the burden of proof remain unaffected.
3) Unless otherwise agreed, simple contract debts by the Purchaser towards
us with respect to or in connection with delivery of the goods shall be barred
one year after supply of the goods. This delay applies also to such goods which
according to their normal utilization are used for a building and have caused its
defectiveness. Our liability for intentional or grossly negligent breach of duty as
well as the statute of limitations of statutory recourse claims remain unaffected.
In the cases of subsequent performance the statute of limitations does not start
to run again.
12. Place of Performance, Venue, Governing Law, Severability
Place of performance for all deliveries and services is Ludwigsburg.
If the purchaser is a merchant, an artificial person or a special property under
public law, venue is at our option either Ludwigsburg or the court competent for
the purchaser in accordance with statutory provisions. The same applies also if
the purchaser at the time of contract conclusion does not have a general venue
within the country or after contract conclusion relocates his residence or place
of business abroad or his usual residence is unknown at the time of filing of an
action.
The contractual relationship shall be governed by German law under the exclusion of the United Nations Convention on Contracts for the International Sale of
Goods (CISG).
If one of the above provisions is or becomes invalid or unenforceable, the other
provisions remain unaffected. The parties engage already now to replace the invalid or unenforceable provision by a provision which in economic effect comes
closest to the invalid or unenforceable one to the extent as legally admissible.
The same applies if the above provisions contain a loophole.

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10