SPEEDLITE E II

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

flash, will, with, Flash, slave, button, exposure, CANON, Speedlite, Canon, master, that, camera's, this, shutter, camera, Press, This, press, automatically, wireless, sec., unit, compensation, 430EX, E-TTL, button., Warranty, When, power

Transcript

Canon
SPEEDLITE
E II
INSTRUCTION MANUAL
MODE D'EMPLOI
MANUAL DE INSTRUCCIONES
Canon
SPEEDLITE
- E II
Thank you for purchasing a Canon product.
The Canon Speedlite 430EX II is a multi-feature flash unit for Canon
EOS cameras. It works automatically with E-TTL II, E-TTL, and TTL
autoflash systems. It can be used as an on-camera flash or as part of a
wireless flash system.
• Read this instruction manual while also referring to your
camera's instruction manual.
Before using the Speedlite, read this instruction manual and your camera's
instruction manual to familiarize yourself with the Speedlite operations.
• The basic operation is the same as with normal AE shooting.
When the 430EX II is attached to an EOS camera, almost all automatic
exposure control for flash photography is handled by the camera.
Although the 430EX II is an external flash unit, it works automatically and
seamlessly like the camera's built-in flash.
• It becomes automatically compatible with the camera's flash
metering mode (E-TTL II, E-TTL, and TTL).
In accordance with the camera's flash control system, the Speedlite controls
the flash automatically in the respective flash metering mode:
1. E-TTL" autoflash (evaluative flash metering with preflash reading/lens
distance information)
2. E-TTL autoflash (evaluative flash metering with preflash reading)
3. TTL autoflash (off-the-film metering for real-time 'flash metering)
Regarding the camera's available flash metering modes, refer to the
"External Speedlite" specification in the "Specifications" of your
camera's instruction manual.
In the camera instruction manual, cameras having flash metering
modes 1 or 2 are called Type-A cameras (compatible with E-TTL II or
E-TTL). And cameras having flash metering mode 3 (compatible only
with TTL) are Type-B cameras.
* This instruction manual assume that you are using the Speed lite with a Type-A
camera.
For Type-B cameras, see page 37.
2
Contents
1 Getting Started and Basic Operation 7 I
2 Using Flash 13 I
3 Wireless Flash 25 I
Reference............................................................................ 32 I
Conventions Used in this Manual
• The <88> symbol in the text refers to the +/- button .
• The < ~.() > symbol in the text refers to the Select/
Setting button.
• The operation procedures in this instruction manual assume that both
the camera and Speedlite's power switches are ON.
• Icons used in the text to indicate the respective buttons, dials, and
settings match the same icons found on the camera and Speedlite.
• The (04 ) / (06) / (816) icons indicate that the respective function
remains in effect for 4 sec., 6 sec., or 16 sec. after you let go of the
button.
• Reference page numbers are indicated by (p.**).
• This instruction manual uses the following alert symbols:
__ : Warning to prevent shooting problems.
Cil :Gives supplemental information.
3
Nomenclature
:;~§~~ ~--- Built-in wide panel
(retracted) (p.18)
Flash head
Wireless sensor-+-~
4
canon
SPEEDUTE 430EX"
AF-assist beam emitter
(p.23)
Case
~--Bracket mounting hole
I ..IJ-- Bracket mount
"""--- -~ cover
-Contacts
Shoe
Mini stand
Bounce angle index
LCD panel (p.6)-~
* <:8:/C.Fn> ----.
','
LCD panel illumination/
Custom Function
setting button (p.6/21)
--l
Flash mode/Slave setting button
(p.11, 19/31)
Mounting foot's lock lever
(p.9)
Power switch (p.1 0)
<88 > +/- button
L * < ~.~ > Select/Setting button
Lock-release button (p.9)
[i] Asterisked buttons have functions which remain active for 8 sec. after you
press and let go of the button. The < J>:- > illumination lasts for 12 sec.
5
LCD Panel
<~ > Auto zoom
for image sensor
size
cal length
ve -< > anua zoom
nsation
-Zoomfo
sh- r-LM mlZoom 188mm
l ~
Manual fla
Manual flash output Ie
Flash exposure compe
amount
Max. flash range
Aperture
Custom Function

E-TIL (II)/TTL autoflash I
<~ > Ur~a:TT :JlJ Indicator (meters)Flash exposure ~ I
compensation 1 0J +8 a/ss +B.BBBB.B W_I Indicator (feet)
<'!l> High-speed -lm rm 1:l>:;=10 -- &m\DIJ
sync (FPflash) :=1 z.~1 1 234 ABC
Custom Function I ~Slave 10
<~ > Second-curtain sync L Channel
<~~ > Slave flash ----'
• To illuminate the LCD panel, press the < :t>:- > button .
• The items actually displayed depend on the current settings.
6
Getting Started and
Basic Operation
Installing the Batteries 8
Attaching and Detaching the Flash......................... 9
Turning on the Power Switch................................ 10
Fully Automatic Flash Shooting 11
Using E-TTL II and E-TTL Autoflash in the
Shooting Modes.................................................... 12
r-- __ Cautions for firing continuous flashes ----,
• To avoid overheating and degrading the flash
head, do not fire more than 20 continuous
flashes. After 20 continuous flashes, allow a rest
time of at least 10 min.
• If you fire more than 20 continuous flashes and
then fire more flashes in short intervals, the
inner overheating prevention function may be
activated to make the recycling time about 8 to
20 sec. If this occurs, allow a rest time of about
15 min. and the flash will then return to normal.
Installing the Batteries
Install four size-AA batteries.
1 Open the cover.
• Slide the battery compartment cover
as shown by the arrow and open it.
3 Close the cover.
• Close the battery compartment cover
and slide it as shown by the arrow.
Install the batteries.
• Make sure the + and - battery
contacts are correctly oriented as
shown in the battery compartment.
2
Recycling Time and Flash Count
0.1 - 3.0 sec. 200 - 1400
• Based on new size-AA alkaline batteries and Canon's testing standards.
o • Using size-AA batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
• If you change the batteries after firing many flashes continuously, be
aware that the batteries might be hot.
[J] • Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
• Size-AA Ni-MH or lithium batteries can also be used.
8
Attaching and Detaching the Flash
2 Secure the Speedlite.
• On the mounting foot, slide the lock
lever to the right.
~ When the lock lever clicks in place, it
will be locked.
1 Attach the Speedlite.
• Slip the Speedlite's mounting foot into
the camera's hot shoe all the way.
(The mounting foot will protrude
slightly from the hot shoe.)
Detach the Speedlite.
• While pressing the lock-release
button, slide the lock lever to the left
and detach the Speedlite.
I
4) Before attaching or detaching the Speedlite, be sure to turn off the Speedlite.
9
Turning on the Power Switch
1 Set the power switch to .
.. The flash recycling starts.
Check that the flash is ready.
• When the pilot lamp lights in red, the
flash is ready to fire (fully charged).
• To fire a test flash, press the
button.
About Auto Power Off
To save battery power, the power will turn off automatically after a
certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the
Speedlite again, press the camera's shutter button halfway. Or press
the Speedlite's < PILOT> button.
Eil • A test firing cannot be fired while the camera's operation timer 04 or ~6
is active.
• The Speedlite's settings will be retained in memory even after the power
is turned off. To retain the Speedlite's settings after you replace the
batteries, turn off the power and replace the batteries within 1 minute.
10
Fully Automatic Flash Shooting
When you set the camera's shooting mode to < P > (Program AE) or
<0 > (Full Auto), E-TTL II/E-TTL fully automatic flash will make it as I
easy as normal AE shooting in the

and <0> modes.
2
Maximum effective range
,- .-, ,- .-
~ Ou :'.0
1 Set the Speedlite to .
• Press the < MODE> button so that
< ETTL > is displayed.
• When you press the shutter button
halfway, the maximum effective range
(distance) of the flash will be
displayed.
Focus the subject.
• Press the shutter button halfway to
focus.
.... The shutter speed and aperture will
be set as displayed in the viewfinder.
• Check that the < ~ > icon is lit in the
viewfi nder.
3 Take the picture.
~ When you press the shutter button
completely, the flash will fire and the
picture will be taken.
.~ If a standard flash exposure was
obtained, the flash exposure
confirmation lamp (green) will light for
about 3 sec.
() If the lens focal length blinks on the LCD panel, the periphery of the flash
picture may turn out dark. Use the built-in wide panel (p.18).
[]] • will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
• If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's ISO speed.
11
Using E-TTL II and E-TTL Autoflash in the Shooting Modes •
Just set the camera's shooting mode to (shutter-priority AE),
< Av > (aperture-priority AE), or < M > (manual) and you can use E-TTL
lifE-TTL autoflash.
Select this mode when you want to set the shutter speed manually.
The camera will then automatically set the aperture matching the shutter
speed to obtain a standard exposure.
• If the aperture display blinks, it means that the background exposure will
be underexposed or overexposed. Adjust the shutter speed until the
aperture display stops blinking.
Select this mode when you want to set the aperture manually.
The camera will then automatically set the shutter speed matching the
aperture to obtain a standard exposure.
If the background is dark like a night scene, a slow sync speed will be used
to obtain a standard exposure of both the main subject and background.
Standard exposure of the main subject is obtained with the flash, while a
standard exposure of the background is obtained with a slow shutter speed.
"~""""'. Since a slow shutter speed will be used for low-light scenes, using a
tripod is recommended.
• If the shutter speed display blinks, it means that the background
exposure will be underexposed or overexposed. Adjust the aperture until
the shutter speed display stops blinking.
Select this mode if you want to set both the shutter speed and aperture
1'.':l:"L! manually.
Standard exposure of the main subject is obtained with the flash. The
exposure of the background is obtained with the shutter speed and aperture
combination you set.
• If you use the or < A-DEP > shooting mode, the result will be the same as
using the < P > (Program AE) mode.
Flash Sync Speeds and Apertures Used
P Set automatically (1 IX sec. - 1/60 sec.)
Tv Set manually (1/X sec. - 30 sec.)
Av Set automatically (1/X sec. - 30 sec.)
M Set manually (1/X sec. - 30 sec., Bulb)
Automatic
Automatic
Manual
Manual
• 1/X sec. is the camera's maximum flash sync speed.
12
Using Flash
~ Flash Exposure Compensation (*) 14
FE L: FE Lock (* ) 15
~ High-Speed Sync (* ) 16
~ Second-Curtain Sync (* ) 16
Bounce Flash 17
ZOOM: Setting the Flash Coverage (* ) and
Using the Wide Panel............................................. 18
M: Manual Flash (*) 19
C.Fn: Setting Custom Functions (* ) 21
Auto Zoom for Image Sensor Size 23
About Color Temperature Information Transmission 23
About the AF-Assist Beam 23
Speedlite Control with the Camera's Menu
Screen (*) 24
-- Features with a star cannot be used in Basic Zone modes.
~ Flash Exposure Compensation
In the same way as normal exposure compensation, you can set
exposure compensation for flash. The flash exposure compensation
amount can be set up to ±3 stops in 1/3-stop increments. (If the
camera's exposure compensation is in 1/2-stop increments, flash
exposure compensation will be in 1/2-stop increments.)
7?fsM~ e
~~JiL OFF
- -.;3 t;.= ~----------I
~
.TTl, I I Zo
l)x,f..... 'I'"'"jtRI - : , 3 ( I ,,,. I I ,..... j
Press the <~.l) > button until the
<~> icon and compensation
amount start blinking.
Set the flash exposure
compensation amount.
• Press the < 88 > button to set the
amount.
• To cancel the flash exposure
compensation, set the amount to
"+0."
Press the <~.~> button.
.. Flash exposure compensation will be
set.
[]] If flash exposure compensation has been set with both the Speedlite and
camera, the Speedlite's flash exposure compensation amount will override
the camera's.
Using <88>
This is for setting various numeric settings. Pressing the <8> (plus)
button increases the number, while the <8> (minus) button decreases
the number.
14
FE L: FE Lock
FE (flash exposure) lock locks the correct flash exposure setting for any
part of the scene.
With displayed on the LCD panel, you press the camera's
button. If the camera does not have the button, press
the <*> button.
1 Focus the subject.
o o Press the button. (816)
• Aim the subject at the center of the
viewfinder and press the < FE L>
button.
~ The Speedlite fires a preflash, then
the required flash output is retained in
memory.
.. "FEL" will be displayed in the
viewfinder for 0.5 sec.
• Each time you press the < FE L>
button, a preflash will be fired and a
new flash exposure reading will be
locked.
-- • If the subject is too far away and underexposure will result, the <~ > icon
will blink in the viewfinder. Move closer to the subject and try the FE lock
again.
• If < ETTL > is not displayed on the LCD panel, FE lock cannot be set.
• If the target subject is too small in the viewfinder, the FE lock might not
be very effective.
15
I
mHigh-Speed Sync
With high-speed sync (FP flash), the flash can synchronize with all
shutter speeds. This is convenient when you want to use aperture
priority for fill-flash portraits.
Zoom S[]mm
Unm,.U
ETTL
Press the <~H/~> button so that
<~> is displayed.
• Check that the < ~H > icon is lit in the
viewfinder.
Ell • If you set a shutter speed that is the same or slower than the camera's
maximum flash sync speed, < ~H > will not be displayed in the viewfinder.
• With high-speed sync, the faster the shutter speed, the shorter the
effective flash range will be. Check the LCD panel for the maximum flash
range for the respective shutter speed .
• To return to normal flash, press the <~H/~> button so that <'I> icon
turns off.
~ Second-Curtain Sync
With a slow shutter speed, you can create a light trail following the
subject. The flash fires right before the shutter closes.
ETTL Zoom SOmm
Press the <~H/t:I> > button so that
<~> is displayed.
Cil • Second-curtain sync works well in the camera's "bulb" mode.
• To return to normal flash, press the < ~H/t:I> > button. The <~ > icon will
disappear.
• With E-TTL IIIE-TTL, when you press the shutter button completely, a
preflash will be fired. Then right before the shutter closes, the main flash
is fired.
16
Bounce Flash
By pointing the flash head toward a wall or ceiling, the flash will bounce
off the surface before illuminating the subject. This can soften shadows
behind the subject for a more natural-looking shot. This is called bounce
flash.
Set the Bounce Direction I
• Hold down the button and turn the flash head.
If the flash coverage is set automatically, the flash coverage will be
fixed to 50mm.
The LCD panel will also display .
• You can also set the flash coverage manually. (p.18)
-- • If the wall or ceiling is too far away, the bounced flash might be too weak
and result in underexposure.
• The wall or ceiling should be a plain, white color for high reflectance. If
the bounce surface is not white, a color cast may result in the picture.
• After you take the shot, if the flash exposure confirmation lamp does not
light, use a larger aperture opening and try again. With a digital camera,
you can also increase the ISO speed.
17
ZOOM :Setting the Flash Coverage and Using the Wide Panel •
The flash coverage can be set to match the lens focal length from
24mm to 105mm. The flash coverage can be set automatically or
manually. Also, with the built-in wide panel, the flash coverage will be
compatible with ultra wide-angle lenses as short as 14mm.
mJZoom 2YmmETTl Press the button.
• Press the < 88 > button to change the
flash coverage.
• If < 1m > is not displayed, the flash
coverage will be set automatically.
[il If you set the flash coverage manually, make sure it covers the lens focal
length so that the picture will not have a dark periphery.
Using the Wide Panel
Pull out the wide panel and place it as
shown.
• The button will not
work.
[ll • The flash coverage will not be compatible with the EF15mm f/2.8
Fisheye lens.
• For the effective lens focal length (or crop factor), refer to the camera's
instruction manual.
-- • If you use bounce flash with the wide panel in place, the entire display on
the LCD panel will blink as a warning. Since the subject will be
illuminated by both the bounce flash and direct flash, it will look
unnatural .
• Pull out the wide panel gently. Using excessive force may detach the
wide panel.
18
M: Manual Flash
You can set the flash output from 1/64 power to 1/1 full power in 1/3stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure. Setting the camera's shooting mode to
or is recommended.
Zoom 3Smm
1 Press the button so
that is displayed.
I
ON 2 Set the flash output.
I~ e • Press the <~.l» button.
-i\~) OFF ~---------1 ~ The flash output blinks.
I\.JII / Zoom • Press the <88 > button to set the
-1/ :-
/ I ' flash output, then press the < ~.l) >
~----'---------' button.
• Press the shutter button halfway to
see the effective flash range
displayed.
M
:/8
Flash Output Display
The manual flash output value will change as shown below when the
flash output is decreased or increased.
(Example) Figures for decreased flash output ---7
1/1
1/1 -0.3 1/1 -0.7 1/2 -0.3 1/2 -0.7
1/2 +0.7 1/2 +0.3 1/4 +0.7 1/4 +0.3
~ Figures for increased flash output
•••
•••
19
Metered Manual Flash Exposures
When the Speedlite is attached to an EOS-1D series camera, you can
also set the flash exposure level manually.
1 Set the camera and Speedlite.
• Setting the camera's shooting mode to or is
recommended.
• Set the Speedlite's flash mode to (Manual flash).
2 Focus the subject.
• Focus manually.
3 Set up an 18% gray card.
• Place the gray card at the subject's position.
• In the viewfinder, the entire spot metering circle at the center
should cover the gray card.
4 Press the button. (816)
.. The Speedlite will fire a preflash and the required flash output for
the subject is retained in memory.
.. On the right side of the viewfinder, the exposure level indicator
will show the flash exposure level for the correct flash exposure.
S Set the flash exposure level.
• Adjust the Speedlite's manual flash level and the
camera aperture so that the flash exposure level
aligns with the standard exposure index.
6 Take the picture.
• Remove the gray card and take the picture.
20
C.Fn: Setting Custom Functions
You can customize Speedlite features to suit your shooting preferences.
You do this with Custom Functions.
Custom
Setting ;0~~~~t' 222: >jjj: .....;11 ~eferenc~Function Function ,,,... & DescriPtion'f'h'"No. ,"~9~No. ,ii. ..,> >.\,'«> ·X// iii? ....... i:-"" :;i-~-:'-:r-;; :i+
C.Fn-OO
0 Meters (m)
Distance indicator display 1 Feet (ft)
0 Enabled
C.Fn-01 Auto power off p.10
1 Disabled
0
Enabled (Depth-of-field preview
button)
C.Fn-02 Modeling flash 1 Enabled (Test firing button) p.30
2 Enabled (with both buttons)
3 Disabled
0 1/32
C.Fn-07 Test firing with autoflash 1 Full output
0 Enabled
C.Fn-08 AF-assist beam firing p.23
1 Disabled
0 Enabled
C.Fn-09 Auto zoom for sensor size p.23
1 Disabled
0 60 minutes
C.Fn-10 Slave auto power off timer
1 10 minutes
0 Within 8 hours
p.28
C.Fn-11 Slave auto power off cancel
1 Within 1 hour
0 Maximum distance
C.Fn-14 Flash range/aperture info. p.11
1 Aperture display
• C.Fn-02-1/3: Convenient when you want to use the depth-of-field
preview button to check the depth of field.
• C.Fn-08: If the Speedlite or camera's AF-assist beam is
disabled, the AF-assist beam will not be emitted.
• C. Fn-14: You can change the information displayed on the LCD
panel when the shutter button is pressed halfway. This
function can be set only with Type-A cameras.
21
I
nue Fn 0
Setting Custom Functions
1 Press the < ~~:-/C.Fn > button for 2
sec. or more so that is
displayed.
2 Select the Custom Function No.
• Press the <88 > button to select the
Custom Function number.
$~e
./ 3~
02 ,I"Fn - '-, "•
Change the setting.
• Press the < ~.2) > button.
~ The setting number will blink.
• Press the < 88 > button to set the
desired number, then press the
< ~.2) > button.
~ After you set the Custom Function
and press the < MODE> button, the
camera will be ready to shoot.
22
Auto Zoom for Image Sensor Size
EOS DIGITAL cameras have one of three image sensor sizes. The lens'
effective focal length will differ depending on the canlera's sensor size.
The Speedlite automatically recognizes the EOS DIGITAL camera's
sensor size and automatically sets the flash coverage for lens focal I
lengths from 24mm to 105mm.
When the Speedlite is attached to a compatible camera, < § > will
appear on the Speedlite's LCD panel.
ETTL Zoom 35m ~
About Color Temperature Information Transmission
When the flash fires, the color temperature information is transmitted to
the EOS DIGITAL camera. This feature optimizes the flash picture's
white balance. When the camera's white balance is set to < m!i!l3 > or
< ~ >, it will work automatically.
To see if this feature works with your camera, see the Specifications in
your camera's instruction manual.
About the AF-Assist Beam
Under low-light or low-contrast conditions when autofocus cannot be
achieved, the built-in AF-assist beam will be emitted automatically to
make it easier to autofocus. The 430EX II's AF-assist beam is
compatible with the AF points of almost all EOS cameras. The AFassist beam is compatible with 28mm and longer lenses. The effective
range is shown below.
Center
Periphery
Effective RangeJm I ftr:;:
Approx. 0.7 - 10 I 2.3 - 32.8
Approx. 0.7 - 5 I 2.3 - 16.4
23
Speedlite Control with the Camera's Menu Screen •
If the Speedlite is attached to an EOS DIGITAL camera enabling
External Speedlite control, the camera can set the Speedlite settings.
• Setting Speedlite functions
The settable functions will vary depending on the flash metering
mode and flash mode.
· Flash mode
· Shutter sync (1 st curtain, 2nd curtain, High-speed)
· Flash exposure compensation
· Flash nletering mode
· Flash firing
· Zoom (Flash coverage)
· Clear Speedlite settings
• Speedlite Custom Functions
· 9 Custom Functions
• Clear All Speedlite Custom Functions
Only C.Fn-OO will not be cleared.
Flash function settings screen* Flash C.Fn settings screen*
External flash C.Fn settingc=n:
Auto power off
O:Enajled
1: Disabled
External flash func. setting
Flash [ode E-TTL II I
Shutter sync. 1st curtain
, Flash expo C011P -2 .. 1..~ .. 1. ~2
E-TTL II Evaluative
Zoom Auto
mII!JClear Speedli te settings o1 2000 7 8 9 10 11000 0 0 1~o
* The screen may look different depending on the camera.
-- If flash exposure compensation has already been set with the Speedlite,
flash exposure compensation cannot be set with the camera.
[i] If any Speedlite Custom Functions and flash function settings other than
flash exposure compensation have been set by both the camera and
Speedlite, the latest setting will take effect.
24
Wireless Flash
Wireless flash photography requires another speedlite
which can serve as the master unit such as Speedlite
580EX II.
Wireless Flash...................................................... 26
Setting Manual Flash with the Slave Unit 31
Reference
430EX II System 32
Troubleshooting Guide......................................... 33
Specifications 35
Using a Type-B Camera....................................... 37
Wireless Flash
3 Check the communication
channel.
• If the master unit and slave unit(s) are
set to a different channel, set them all
to the same channel (p.29).
4 Set the slave 10.
• Set the slave 10 when using two (A
and B) or three (A, 8, and C) slave
groups (p.30).
5 Position the camera and
Speedlites.
• Position the slave unit(s) within the
master unit's wireless transmission
range.
mZoom 2Ymm
==-:l __ .
z.~. 1 A
IIZoom 2'-1mmETTl
With multiple Canon Speedlites having the wireless flash feature, you can
create various lighting effects with the same ease as using normal E-TTL II
autoflash.
The settings you input with the master unit attached to the camera are
also automatically transmitted to the slave units which are controlled by
the master unit via wireless. Therefore, you need not operate the slave
unit(s) at all during the shoot.
For details on wireless flash photography and operating the master unit,
see the master unit's instruction manual. The procedure below applies to a
master unit attached to the camera and slave unit(s) controlled by wireless.
1 Set the master unit.
• Attach the master unit Speedlite to
the camera and set it as necessary.
~12 Set the 430EX II as the slave unit.
/" • Hold down the
button for 2 sec. or more.
26
8
6 Set the master unit's flash mode
to .
• For shooting, will also be
set automatically for the slave unit(s).
7 Check that the flash is ready.
• When the slave unit(s) is ready to fire
(fully charged), the AF-assist beam I
will blink at 1-sec. intervals.
Check the flash operation.
• Press the master unit's test firing
button .
... The slave unit will fire. If the flash
does not fire, adjust the slave unit's
angle toward the master unit and
distance from the master unit.
9 Set the camera and shoot.
• Set the camera in the same way as
with normal flash shooting.
Sample wireless flash setup
Slave B
(430EX II)
8m (26.2ft.) 12m (39.4ft.)
"'" 80°
" \
\
\
outdoors J--~~"""""-Master unit such as
Speedlite 580EX II
27
• Use the mini stand (tripod socket provided) to prop up the slave unit.
• Use the bounce feature to swing the slave unit's flash body so that
the wireless sensor faces the master unit.
• Indoors, the wireless signal can also bounce off the wall so there is
more leeway in positioning the slave unit(s).
• After positioning the slave unit(s), be sure to test the wireless flash
operation before shooting.
• Do not place any obstacles between the master unit and slave
unit(s). Obstacles can block the transmission of wireless signals.
[l] • Even with multiple slave units, all of them will be controlled in the same
way via wireless.
• The Speedlite's zoom setting will be set automatically to 24mm. It is
possible to change the master unit's zoom setting. However, note that
the master unit transmits wireless signals to the slave unit(s) with the
preflash. Therefore, the flash coverage must cover the slave unit's
position. If you change the master unit's zoom setting, be sure to test the
wireless flash operation before shooting.
• If the slave unit's auto power off takes effect, press the master unit's test
firing button to turn on the slave unit.
• If the 430EX II is set as a slave unit and remains in auto power off mode
for more than 8 hours, it will not turn on even if you try to fire a test flash
with the master unit. In this case, press the slave unit's test firing button
to turn it on.
• A test flash cannot be fired while the camera's operation timer 04 or 06
is active.
28
Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set with the master
unit will also be automatically set in the slave units. Thus, you need not
operate the slave unit(s). Wireless flash with the following settings can
be done in the same way as with normal flash shooting.
• Flash exposure compensation
• High-speed sync (FP flash)
• FE lock
• FEB
• Manual flash
• Stroboscopic flash
I
[l] • With FE lock, if even one Speed lite will result in underexposure, the < ~ >
icon will blink in the viewfinder. Open the aperture more or move the
slave unit closer to the subject.
• With a wireless flash system, the master unit's settings will not be
displayed on the 430EX Irs LCD panel.
Setting the Communication Channel
If there is another Canon wireless flash system nearby, you can change
the channel No. to prevent signal confusion. Both the master and slave
units must be set to the same channel No.
ETTL mZoom 2l.fmm
, I I /
3.-'- eM;_ _-~...
z....... 1 ,A
"--------/-1-\------'
/'
/'
ai}Zoom 2
1 Press the button
so that < > blinks.
Set the channel No.
• Press the < 88 > button to select the
channel number, then press the
< CSeZJ > button.
29
Setting the Slave 10
Set the slave 10 if you use two (A and B) or three (A, B, and C) slave
groups.
" 1/ "-3.:l. _.-=rn.:.__~
oz.._ 1 ~A"
'--------/-1-\
SLAVE
1 Press the button
so that < > blinks.
mlZoom 2YmmETTL
~e -~~
~ I}Zoom 2Ymm
3Kl M':. &11·$,'.
z..1 2 A
Set the slave 10.
• Press the < 88 > button to select the
slave 10 (A, B, or C), then press the
<~.2» button.
Modeling Flash
If the camera has a depth-of-field preview button, pressing it will fire the
flash continuously for 1 sec. This is called the modeling flash.
It enables you to see the shadow effects on the subject and the lighting
balance. You can fire the modeling flash for both wireless and normal
flash shooting.
o Do not fire the modeling flash more than 10 consecutive times. If you
fire the modeling flash 10 consecutive times, allow the Speedlite to
rest for at least 10 min. to avoid overheating and deteriorating the flash
head.
III The modeling flash cannot be fired with the EOS REBEL 2000/300 and
Type-B cameras (p.2).
30
About Slave Group Control
Slave group A
ID=A ID=A ID=A
For example, if you have the slave 10 set
to < A> for three slave units, all three
slave units will be controlled as if they
were one Speedlite in slave group A.

Setting Manual Flash with the Slave Unit
Manual flash can be set manually with the slave unit. Do this in the
following cases:
(1) When you want to set the flash output with the slave units
individually for wireless or manual flash, as with studio flash units.
(2) When you use Speedlite Transmitter ST-E2 for wireless or manual
flash.
-~- mZoom 2Ymm
I, '6I I
~., Mil...".0.oz.- 1
• Hold down the button for 2
sec. or more.
~ < M> will blink.
• Set the manual flash output. (p.19)
31
Reference
430EX II System
oj en
cv ~\\\\\\\\\\"'-e
8
CD Speedlite 430EX II (Slave unit)
(l) Mini stand (included with 430EX II)
® Speedlite 580EX II (On-camera/Master unit)
® Speedlite Transmitter ST-E2
Dedicated transmitter for wireless control of 430EX II set as slave units.
~ Macro Ring Lite MR-14EX / ® Macro Twin Lite MT-24EX
Flash for macro photography.
CV Off-Camera Shoe Cord OC-E3
Enables the 430EX II to be connected to the camera up to 60 cm/2 ft away.
® Speedlite Bracket SB-E2
32
Troubleshooting Guide
If there is a problem, refer to this Troubleshooting Guide.
The Speedlite does not fire.
• The batteries are installed in the wrong orientation.
• Install the batteries in the correct orientation. (p.8)
• The Speed lite's internal batteries are exhausted.
~ If the flash recycling tinle takes 30 sec. or longer, replace the
batteries. (p.8)
• The Speed lite is not attached securely to the camera.
~ Attach the Speedlite's mounting foot securely to the camera. (p.9)
• The electrical contacts of the Speed lite and camera are dirty.
~ Clean the contacts.
The slave unit does not fire.
• The channel does not match the master unit's channel.
... Set it to the same channel as the master unit. (p.29)
• The slave unit(s) is not positioned properly.
... Place the slave unit within the master unit's transmission range.
(p.26)
... Point the slave unit(s)'s sensor toward the master unit. (p.26)
The power turns off by itself.
• Auto power off took effect.
.. Press the shutter button halfway or press the button.
(p.10)
The entire LCD panel blinks.
• The wide panel has been pulled out for bounce flash.
~ Retract the wide panel. (p.18)
Auto zoom does not work.
• The Speedlite is not attached securely to the camera.
~ Attach the Speedlite's mounting foot securely to the camera. (p.9)
33
I
The periphery or bottom of the picture looks dark.
• When you set the flash coverage manually, the setting was a
higher number than the lens focal length, resulting in a dark
periphery.
.. Set the flash coverage that is a lower number than the lens focal
length or set it to auto zoom. (p.18)
• If only the bottom of the picture looks dark, you were too
close to the subject.
~ Keep at least 0.7 m/2.3 ft away from the subject.
The flash exposure is underexposed or overexposed.
• There was a highly reflective object (glass window, etc.) in
the picture.
~ Use FE lock. (p.15)
• The subject looks very dark or very bright.
.. Set flash exposure compensation. For a dark subject, set a
decreased flash exposure. And for a bright subject, set an
increased flash exposure. (p.14)
• You used high-speed sync.
~ With high-speed sync, the effective flash range will be shorter.
Make sure the subject is within the effective flash range displayed.
(p.16)
The picture is really blurred.
• The shooting mode was set to , and the scene was
dark.
.. Use a tripod or set the shooting mode to

. (p.12)
The buttons do not work.
• The Mode Dial is set to a Basic Zone mode.
.. Set the Mode Dial to a Creative Zone mode.
34
On-camera, E-TTL II/E-TTL/TTL autoflash Speedlite
Type-A EOS cameras (E-TTL II/E-TTL autoflash),
Type-B EOS cameras (TTL autoflash)
43/141 (at 105mm focal length, ISO 100 in meters/feet)
24 - 105mm (14mm with wide panel)
• Auto zoom (Flash coverage set automatically to match the
lens focal length and image sensor size)
• Manual zoom
• Flash head swing (bounce flash)
Guide No.:
Flash coverage:
Specifications
-Type
Type:
Compatible cameras:
Color temperature
information transmission: Flash color temperature information transmitted to camera
when flash is fired I
- Exposure Control
Exposure control system:
Effective flash range:
(With EF50mm f/1.4 lens
at ISO 100)
Flash exposure
compensation:
FE lock:
High-speed sync:
Flash exposure
confirmation:
E-TTL II/E-TTLITTL autoflash, manual flash
0.7 - 24.3 m I 2.3 - 79.7 ft.
* High-speed sync: 0.7 - 12 m 12.3 - 39.4 ft. (at 1/250 sec.)
±3 stops in 1/3- or 1/2-stop increments
Provided
Provided
Flash exposure confirmation lamp lights
- Flash Recycling
Recycling time:
Flash-ready indicator:
Normal flash: Approx. 3.0 sec. (with size-AA alkaline
batteries)
Red pilot lamp lights
- Wireless Slave
Transmission method:
Channels:
Transmission range:
Slave-ready indicator:
Modeling flash:
Optical pulse
4
Reception angle: Approx. ±40° horizontal, Approx. ±30°
vertical
AF-assist beam blinks
Fired with camera's depth-of-field preview button
- Custom Functions: 9 (20 settings)
35
• AF-Assist Beam
Linkable AF points:
Effective range:
• Power Source
Battery:
Battery life (flash count):
Power saving:
• Dimensions
(W x H x D):
• Weight:
1 - 9 AF points (28mm or longer focal length)
At center: Approx. 0.7 - 10m /2.3 - 32.8 ft.,
Periphery: Approx. 0.7 - 5 m / 2.3 - 16.4 ft.
Four size-AA alkaline batteries
* Size-AA Ni-MH and lithium batteries also usable
Approx. 200 - 1400 flashes (with size-AA alkaline batteries)
Power off after approx. 1.5 min. to 15 min. of idle operation
(60 min. if set as slave)
72 x 122 x 101 mm /2.8 x 4.8 x 4.0 in.
Approx. 320 g / 11.3 oz. (Speed lite only, excluding batteries)
• All specifications above are based on Canon's testing standards.
• Product specifications and external appearance are subject to change without
notice.
Manual Flash Guide No. (ISO 100, in meters/feet)
Flash Output
Flash Coverage (mmr
14 24 28 35 50 70 80 105
.. '" .,
1/1 11/ 25/ 27/ 31/ 34/ 37/ 40/ 43/
36.1 82 88.6 101.7 111.5 121.4 131.2 141.1
1/2 7.8/ 17.7/ 19.1/ 21.9/ 24/ 26.2/ 28.3/ 30.4/
25.6 58.1 62.7 71.9 78.7 86 92.8 99.7
1/4 5.5/ 12.5/ 13.5/ 15.5/ 17/ 18.5/ 20/ 21.5/
18 41 44.3 50.9 55.8 60.7 65.6 70.5
1/8
3.9/ 8.8/ 9.5/ 11/ 12/ 13.1/ 14.1/ 15.2/
12.8 28.9 31.2 36.1 39.4 43 46.3 49.9
1/16 2.8/ 6.3/ 6.8/ 7.8/ 8.5/ 9.3/ 10/ 10.8/
9.2 20.7 22.3 25.6 27.9 30.5 32.8 35.4
1/32 iii'!,,): 1.9/ 4.4/ 4.8/ 5.5/ 6/ 6.5/ 7.1/ 7.6/
6.2 14.4 15.7 18 19.7 21.3 23.3 24.9
1/64
"II
1.4/ 3.1/ 3.4/ 3.9/ 4.3/ 4.6/ 5/ 5.4/
4.6 10.2 11.2 12.8 14.1 15.1 16.4 17.7
"."''''
36
Using a Type-B Camera
If you use the 430EX II with a Type-B camera (TTL autoflash EOS
camera), note the features available and not available below.
When a Type-B camera is used with the 430EX II set to autoflash,
will be displayed on the Speedlite's LCD panel.
Features Available with Type-B Cameras
· TTL autoflash
· Flash exposure compensation
· Manual Flash
· Second-curtain sync
· Manual flash and stroboscopic flash with wireless flash
Features not Available with Type-B Cameras
· E-TTL II/E-TTL autoflash
· FE lock
· High-speed sync (FP flash)
· Autoflash and flash ratio setting with wireless flash
37
I
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise
specified in the instructions. If such changes or modifications should be made,
you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la c1asse Best conforme a la norme NMB-003 du
Canada.
38
The apparatus shall not be exposed to dripping or splashing.
Batteries shall not be exposed to excessive heat such as sunshine, fire' or the
like.
Dry batteries shall not be subjected to charging.
-
European Union (and EEA) only.
This symbol indicates that this product is not to be disposed of with
your household waste, according to the WEEE Directive (2002/96/
EC) and your national law. This product should be handed over to
a designated collection point, e.g., on an authorized one-for-one
basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic
equipment (EEE). Improper handling of this type of waste could
have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation in the
correct disposal of this product will contribute to the effective usage
of natural resources. For more information about where you can
drop off your waste equipment for recycling, please contact your
local city office, waste authority, approved WEEE scheme or your
household waste disposal service. For more information regarding
return and recycling of WEEE products, please visit www.canoneurope.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
39
I
Canon
This Instructions booklet is dated May 2008. For information on the camera's
compatibility with system accessories marketed after this date, contact your
nearest Canon Service Center.
Canon
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANADA---
JAPAN----
OCEANIA---
EUROPE, ---
AFRICA &
MIDDLE EAST
CENTRAL &--
SOUTH AMERICA
ASIA-----
U.S.A. ---- CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-0K-CANON
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga. Ontario L5T 1P7. Canada
CANON CANADA INC. MONTREAL BRANCH
5990, C6te-de-Liesse, Montreal Quebec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-0K-CANON
CANON EUROPA N.V.
Bovenkerkerweg 59-61, PO. Box 2262,1180 EGAmstelveen, The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.S.
12 Rue de I'Industrie 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8 1-20097 San Donato Milanese, Milano, Italy
CANON Schweiz AG
Geschaftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland
CANON GMBH
Zetschegasse 11, A-1230 Wien, Austria
CANON Espana, S. A.
C/Joaquin Costa, 41.28002 Madrid, Spain
SEQUE Soc. Nac. de Equip., Lda.,
Pra9a da Alegria, 58,2°,1269-149 Lisboa, Portugal
CANON LATIN AMERICA, INC.
703 Waterford Way, Ste. 400 Miami, FL 33126, U.S.A.
CANON (China) Co., Ltd.
15F Jinbao BUilding NO.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Startower Bldg.17F.737,Yeoksam-Dong, Kangnam-Ku, Seoul, 135-984, Korea
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
CT1-7792-000 © CANON INC. 2008
PRINTED IN CHINA
IMPRIME EN CHINE
IMPRESO EN CHINA
.... .. ... . ..
Complete this card at time of sale. A remplir au moment de I'achat L1ene esta tarjeta en el momento de la venta.
PRESENT OWNERSHIP AND PRODUCTS INTERESTED IN
Articles deja en possession ou juges dignes d'interet
Productos en posesi6n y que Ie interesan
CTS-7728-00S PRINTED IN CHINA
OWN INTERESTED IN
En possession Interesse par
EN POSESI6N INTERESADO EN
OTHER ACCESSORIES
Autres accessoires
OTROS ACCESORIOS
INTERCHANGEABLE LENS OWN INTERESTED IN
Objectif interchangeable En possession Interesse par
OBJETIVOS INTERCAMBIABLES EN POSESI6N INTERESADO EN
CAMERAS
OWN INTERESTED IN
MODEL SERIAL NO.En possession Interesse par
Appareils
(Camera) (Camera) EN POSESI6N INTERESADO EN
Modele SPEEDLITE 430EX II No. de serie·photo MODELO N' DE SERlE
CAMARAS (Appareil) (Appareil) 0 0(CAMARAS) (CAMARAS)
(Camera) (Camera)
(Appareil) (Appareil)
0 0(CAMARASj (CAMARAS)
0 0 0 0 CUSTOMER~
CLiENTE
NAME ADDRESS
0 C 0 0
Nom Adresse
NOMBRE DIRECCION
CITY/STATE ZIP PHONE
Ville/Province Code postal Telephone
CIUDAD/ESTADO C6DIGO POSTAL TELEFONO
~~, ~",< CANON U.S.A., INC. CANON U.K.RCC CANON NEW ZEALAND LTD. CANON LATIN AMERICA,INC.
Al.... - CANON CANADA., INC. CANON AUSTRALIA PTY LTD. CANON SALES CO. JAPAN CANON MEXICANA
NAME
NOM
NOMBRE
ADDRESS
ADRESSE
DIRECCION
MODEL
MODELE
MODELO
SPEEDLITE 430EX II
BODY NO.
BOITIER NO
N" DE CUERPO
j PURCHASE DATE
DATE D'ACHAT
FECHA DE COMPRA
CITY
VILLE
CIUDAD
PROVINCE
PROVINCIA
POSTAL CODE
CODE POSTAL
C6DIGO POSTAL
THIS WARRANTY CARD AND YOUR BILL OF SALE MUST BE
PRESENTED FOR WARRANTY SERVICE.
CETTE CARTE DE GARANTIE ET VOTRE PREUVE D'ACHAT DOIVENT
~TRE PRESENTES POUR RECEVOIR LE SERVICE SOUS GARANTIE.
PRESENTE ESTA TARJETA DE GARANTIA Y LA BOLETA DE COMPRA
PARA PODER RECIBIR EL SERVICIO DE GARANTIA.
DEALER'S NAME & ADDRESS
MARCHAND NOM & ADRESSE
NOMBRE Y DIRECCION DEL DISTRIBUIDOR
Canon LIMITED WARRANTY Canon GARANTIE L1MITEE
The Umrted Warranty sellorth below Is given by CANON COMPANY listed below With respect to Canon Pholographlc Products purchased in lhe United Stales, Canada, Australia, the Uniled
Kln¢o!n, New Zealand, Mexico or Japan.
This Urniled International Warranty is only effective upon presentatIOn ollhe warranty card ar'ld prool 01 purchase.
This Canon eQuipment IS warranted againsl delective materials or workmanship lor one (I) year trom the dale 01 original purchase and is limited to repair, adjustment and/or replacement of
delectJveparts.
Equipment covered by thiS Warranty will be repaired by Canon InlemalJonal Warranty Members located In the Uniled States, Canada, AUslralia the Uniled Kingdom, New Zealand, MexICO and
Japan, WITHOUT CHARGE, (Ust 01 Canon International Warranty Members Included with the eQuipment.)
EqUipment covered by thiS Warranty will be repaired by Canon Intematlonal Warranty Members WITHOUT CHARGE, except lor insurance, transportation and handling charges. (See hst of
Canon IntematlOflal Warranty Members Included wittl the equipment.)
Whef1 retuming equlpmenl tor warranty service. the shipping charges must be Pfepald and the equipment should be shipped In Its original carton or box, or an eqUivalent, properly packed to
Withstand Ihe hazards 01 shipmenl and be lully Insured. A copy 01 this warranty card and prool of purchase shoUld be enclosed, as well as a description of lhe problem, 'ilm samples, etc,
Repairs WIll be made and the equipment Will be returned, shipped at NO CHARGE Within Ihe country of repair
This warranty only covers defectIVe materials Of wortunansnlp encountered In normal use oflhe equipment and does not apply In the 'ollowing cases·
(a) Loss 01 damage to the equipment due to abuse causing delenoratiOll, mishandling, accident or tallure to follow operating inslructlons.
(b) n equipment Isdefectlveasa resullol leaking ba"eries or Ilquld damage.
(c) Defective meterials or wonunanship where the defect Is due 10 the equipment haVlflg been serviced or modified by other lhan Cal'lOfl International Warranty Members or other aUlhorized
service facilities around the world,
(d) Malfunction resulting Irom the use or accessories, allachments, product supplies, parts or devICeS (Iflcludlflg, Wlthoul limitation, batteries, film, lenses, l1ash attachments and other
accessories) with lhis canon photographic eqUipment that do not conform 10 Canon specIfications
(e) Damage resulting during shipment. (Ctalm must be presented and examined by the shipper,)
Equipment covered by this warranty may be repaired by Canon International Warranty Members Iocaled outside lhe United States, Canada, AustralIa. the United Kingdom. New Zealand,
Mexico and Japan, WITHOUT CHARGE, except for Insurance, transportation and handling charges, (WortdWide list 01 Canon Inlernational Warranty Members included With equipment.)
CANON COMPANY EXCLUDES ALL REPRESENTATIONS, WARRANTIES, CONDITIONS OR LIABILITIES (WHETHER EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE) IN RELATION TO THE EQUIPMENT, EXCEPT THOSE WHICH ARE SET FORTH ABOVE ANDrOR EXCEPT TO THE EXTENT THAT ANY
SUCH EXCLUSION WOULD CONTRAVENE ANY STATUTE OR CAUSE THIS TERM TO BE VOID,
EXCEPT TO THE EXTENT THAT ANY SUCH EXCLUSION WOULD CONTRAVENE ANY STATUTE OR CAUSE THIS TERM TO BE VOID, CANON COMPANY EXCLUDES ALL LIABILITY
TO THE PURCHASER IN RESPECT OF ANY CLAIM (WHETHER CONTRACTUAL, TORTIOUS, STATUTORY OR OTHERWISE) FOR ANY GENERAL, SPECtAL, INCIDENTAL OR
CONSEOUENTIAL LOSS, DAMAGE, COST OR EXPENSE (INCLUDING, WITHOUT LIMITATION, ANY LOSS OF FILM) IN RELATION TO THE eQUIPMENT OR ANY SERVICES
SUPPLIED BY CANON COMPANY IN RELATION TO THE EOUIPMENT, THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
EOUIPMENT OR THE PERSON FOA WHOM IT WAS PURCHASED AS A GIFT
This warranty gives you specllic legal nghls,andyou may also have other rights which vary trom slale to state, province to provlflce and counlry to country
KEEP THIS WARRANTY CARD. IT IS YOUR PERMANENT RECORD OF WARRANTY, IF LOST IT WILL NOT BE RE-ISSUED
'Umiled Warranty means thaI the contents olthls warranty are limlled 10 the above-mentioned terms and conditiOns.
La garantia Internatlonale d6crite ci-dessous est accordee par la societe CANON a I'egard des produtls de pholographie Canon aenetes aux Etats-Unis, au Canada, en Australle, au RoyaumeUnLenNouvelieZelande,au Mexiqueou au Japon,
La presenle garantie intemationale n'esl vallde que sur presentation de la cartedegarantleetd'unepreuved'aChal.
Le present eqUlpement Canon est garanli contre les vICes de materiaux ou de fabrication pendant une periode de un (1) an ;II compter de la dale de rachat Initial. SI I'equipemenl presente une
de,ectuosilependanliaperiodedegarantla, 18$ p!ecesdSfeclueuses seront reparees,regleeset(ou)remplaceas
L'equlpement sous garantie sera repare SANS FRAIS par les membres du reseau monellal de foumisseurs de service sous garantie intematlonale de Canon, qui sont silues aUJ( Etats-Unls, au
Canada, en Australia, au Royaume-Unf, en Nouvelle Zelande, au Mexlque et au Japon. (La liste des membres du reseau moodlal de foumisseurs de service sous garantie Intemalionale de
Canon accompagne I'equipemenl.)
Slle prodult est retoume pour 6tre repare ou remplace au litre de Is garantle, I'expe<:iiteur du produit doit payer d'avance les Irals d'expedition, l'equipement dolt 6lre envoye dans sa boTte
originale, ou dans un emballage equivalenl, 6tre assure pour sa valeur Inlegrale, el II doil 6tre emballe adequatement pour eviler les risques de dommages en cours de transport, L'equJpement
dolt 6tre accompagne d'une caple de la presente carte de garantia, d'une preuve d'achal alns! que cfune descrlptJon du probleme, d'echantillons de pellicule ou de loute autre preuve de
aefectuosite. Les reparations serent eHectuees el I'equlpement sera reloume Ii I'expediteur, SANS FRAIS, si I'adresse de I'expecliteur est dans Ie paye oiJ I'equlpement a ete repare
lapreS8r11egarantlenecouvrequelesvlcesdemat8rlau)fetdefabricationsurvenus dans Ie cadre d'une utillsallonnormaledel'equipemenl. Ellenes'appllquepasdanslescassuivants:
(a) perte de I'equlpement ou dommage a l'eqUipement en raison d'un usage abusll menant a la oeterioratlOo, d'une manipulation Inappropriee, d'un accident ou de toul de'aut de suivre les
directlvesd'ull1issllon;
(b) dilectuositeanribuableaull8tulteaunlveaudespilesoudommagesdusaune exposition a des subslances liquldes;
(c) vices de mal8rlaux ou de tabrlcatlon dus a la reparalion ou tI la modltlcalion de I'equlpement par un tiers, autre qu'un membre du reseau mon de Canon, ou autre qu'un polnl de servICe autorlse au moode:
(d) delaut de londlOflnemenl dtk:oulant de I'usage d'accessoires, de complements, de 'oumltures, da pieces ou de dlsposltils (y compris, sans toutetois s'y Ilmlter, les piles, les pelilcules, les
lenlilles, les lampes-eclairsetautresaCC8ssolresjqutsontnonconlormesauxspeeiliCationsCanOl'letqulsontutlllsesaveccelequipemenldepholographleCanOl'l:
(e) dommages subis en coors de tranSpOr1 (Toule reclamation doll ~tre presentee et examinee par Ie lransponeur,)
L'equlpemenl sous garantle peul Atrs repare SANS FRAIS par les membres du reseau mondial de 'oumlsseurs de service sous garantle cIe Canon qui onl une place d'affaires a I'exlerteur des
Elats·Unis, du Canada, de l'Australle, du Royaume-UnJ. de la Nouvelle Zelande, du Mexique et du Japan, mais Ie proprietaire de l'eqUipement devra assumer las lrals d'assurance, de transport
et de manutention. (La Iiste des membres du reseau mondlal de loumisseurs de service sous garantie de Canon accornpagne I'equlpement.)
LA SOClnE CANON DI:CLARE QU'IL N'EXISTE, A L'I:GARD DE CEl EOUIPEMENT, AUCUNE AUTRE DI:CLARATION, GARANTIE, CONDITION OU OBLlGATfON (EXPRESSE OU
TACITE, Y COMPAIS TOUTE GARANTIE DE OUALJTE MAACHANDE OU DE CONVENANCE A UN USAGE PARTICUlIERj QUE LA GARANTIE ENONCEE CI·DESSUS, A MOINS
OU'UNE TELLE CLAUSE D'EXCLUSION N'ENFREGNE TOUTE LOI APPLICABLE OU NE RENDE LA PRESENTE MODALITE NULLE.
A MOINS QU'UNE TELLE CLAUSE D'EXCLUSION N'ENFREIGNE TOUTE LOI APPLICABLE OU NE RENDE LA PRI:SENTE MODALJTE NULLE, LA SOCll!TE CANON N'ASSUME
AUCUNE RESPONSABILITE AL'I:GARD DE TOUTE RECLAMATION (DE NATURE CONTRACTUELLE, Dl:lICTUELLE, LI:GALE OU AUTRE) FONDI:E SUR TOUTE PERTE (Y COMPRIS,
SANS TOUTEFOIS SY LIMITER, TOUTE PERTE DE PELLJCULE), TOUS DOMMAGES, TOUT COUT OU TOUS FRAIS DE NATURE GENI:AALE, SPECIALE, ACCESSOIRE OU
INDIRECTE TOUCHANT L'EQUIPEMENT OU SUR TOUT SERVICE DISPENSI: PAR LA SOCIETI: CANON A L'EGARD DE L'EOUIPEMENT. LA PAI:SENTE GARANTIE NE
S'APPLJQUERA A AUCUNE AUTRE PERSONNE QUE L'ACHETEUR INITIAL DE CET EQUIPEMENT OU LA PERSONNE QUI L'A RECU EN CADEAU
lapresentegarantlevouscon'eredesdroltspanicullersenvenudelalol,ellIsepeutquevouaayezd'aulresdrOltsqulvarlenlselonl'etat.laprovlnceou Ie pays
VEUILLEZ CONSERVER LA PRESENTE CARTE DE GARANTIE, ELLE CONSTITUE UNE PREUVE PERMANENTE DE LA GARANTIE APPLJCABLE A VOTRE EQUIPEMENT ET NE SERA
PAS REEMISE EN CAS DE PERTE,
°LapresentegaranlleestquallfieedellmiteecarsoncontenuestrestreIntau)fmodahtesetcondltionsdecnlesci-dessus
Canon GARANTIA L1MITADA
La galtlfltfa Wmilada estableclda a continuacl6n es olorgada por las empresas CANON COMPANY Indlcadas en la hsta de abelo. para los produetos fotogrAlicos Canon comprados en los
Estados Unidos, Canada, Australia, Reina Uoido, Nueva Zelanda, Mexico 0 Jap6n,
ESla garantla intemaclonallimltada serti efectNa unlcamente contra presenlaci6n de Is tal']eta de garantia y de una prueba fehaClente de la compra,
EI equlpo Canon esta garanllzado contra delectos de material 0 de mana de Obra bajo uso normal por un perfodo de un (1) ano a partir de la lecha de compra original y se encuentra IImllado a
!areparacl6n,alusteosusllluci6nyloreemplazodelaspiezasdelectuosas
EI equlpo cubierto par asta garantla serti reparado por los mlembros de la garantfa Ifltemaclonal Canon ubicados en los Estados Unldos, Canada, Australia, Reloo Unldo, Nueva Zelanda,
Canon latIn AlMrica, MexICO y Jap6n SIN CARGO ALGUNO. (La Ilsta de los mlembros de la garantla intemacional Canon que acompai'la al equlpo)
EI equlpo cublerto par esta garantra sera reparado por los mlembros de la garanHa IntemaclonaJ Canon, SIN CARGO ALGUNO, excepto para los gastos de seguro, transporte y manejo
(Vease !a 11518 de mlembros de la garantfa lntemaclonal Canon que acompai'la al eQulpo)
Para poder recibir el selVicio de garantre, usted debar! anvlar el producto con todos los tletes pagados de antemano en su caJa de cart6n original 0 equivalente, debklamente empaquetado
para que pueda soportar los riesgos de transporte, y complelamente asegurado. Se deberti lnclw una copIa de esta tarjeta de garanlla y una prueba lehacienle de la compra, Junto con una
descnpcl60dal problema,muestmsde pel!cu!as, etc.
58 efectuaran las reparaclones y eillele de la devoluci6n del equipo sera SIN CARGO dentro del pars de reparaci6n.
EstegarantiacubreunlcamentelosdefectosdematerielOdemanodaObrabajousonormal,yooseraapllcableenlosSlgulentescasos:
(a) PerdidasodaflosaleQulpocausadospordelerior'oresultantedelabuSO,maluso,aecidente,oraltadeatencl6nafaslnstruccionesdefuncionamiento
(b) Delaetos del eQuipo resultante de perdk!as de electrOllto 0 da dai'los causados par al mlsmo.
(c) Defecto de malerlal 0 de mano de Obra cuando el delacto sea resultado de moditicacl6n 0 reparaci6n realizada por personal distinto de los miembros de la garantla intemacional Canon u
otroscentrosdeservicloautorizaclosdislnbuldosparlodoelmunclo.
(d) Fallode funclooamlanto resultante de la utdlzaci6n, Junto con este equlpo fotografico Canon, deaccesorlos, plazas de sujecl6n, consumiblesdel prodUClo, repuestos odlspositlvos
(locluyendo, sln Ilmitad6n, pl1as, pellculas, Objel/Vos, accesorlos de Uash y otros accesorios) que no cumplan con las especillcaclones de Canon
(e) Danos provocados duranle ellransporte. (EI reclamo debe ser presenlaclo a y examlnado por ta empresa de transporte)
E1 equlpo cublerto por esta garantla puede ser reparado por los miembros de fa garamla InternaclOnal Canon ubicados luera de ESlados Unldos, Canada, Australia, Relno Unido, Nueva
Zelanda, canon latIn Amenca, Mexico y Jap6n SIN CARGO AlGUNO, exceplo para los gaslos de seguro, lransporte 'II manejo. (La lisla de los mlembros de la garanlfa Intemaclonal Canon
del mundoqueacompaflaalequipo)
CANON COMPANY EXCLUYE TODAS LAS AEPRESENTACIONES, GARANTiAS, CONDICIONES U OBUGACIONES (SEA EXPRESA 0 IMPUCITA, INCLUYENDO COMERCIABIUDAD E
IDONEIDAD PARA UN PROP6SITO PARTICULAR) RELACIONADAS CON EL EQUIPO, EXCEPTO LO EXPRESAMENTE ESTABLECIDO EN EL TEXTO PRECEDENTE YIO EXCEPTO
HASTA EL GRADO EN QUE ALGUNA EXCLUSI6N PUEDA INFRINGIR ALGUN ESTATUTO 0 CAUSAR LA ANULACI6N DE ESTOS TERMINOS,
EXCEPTO HASTA EL GRADO EN QUE ALGUNA EXCLUSION PUEDA INFRINGIA ALGUN ESTATUTO 0 CAUSAR LA ANULACI6N DE ESTOS TI:RMINOS, CANON COMPANY NO
~~L~~~~7:f~~~~~::~~~~~~~i~~61~t,~~~lri~~~6b~~~EJ~NUj~~~E.f~~~~6~~~o~~~~g~~i~~8~~~~~~~~tti~~~~~g~~~E~D~~A~T~:
~~~g~~)tN~~~~~:E~;~~~~~~~~~~cf~~~~:~~~Ers~~~~s:~g~~~~5J~~~~:~:A~?~lIi)0~~~YR~~A~~~CI6NCON EL EQUIPO. ESTA GARANTIA SE
~~~f~~n~(;T~~f,t'~~si,~g~~~I~~~;~~}~~'JAe~~~~U;R:1~:~;~~~n~~A~~;it~Nb~~~~~~~~t,oAaE:~~3'h~r~~~~~~vlnCla,0 de pals a pals,
'GaranlCalimilaoasignilicaqueelcontenldodeestagarantiaseencuenlralimitaooalostermlnos y condiciones mencionados mAs arriba.
Canon Australia Pty, LId. 1 Thomas Holl OrNe, North Ryde. Sy<:Iney N.S,W.2113, Aualralla
Canon Canada, IJ'IC. 6390 Dixia Road, Mlssissauga, Ontario, L5T 1P7 Canada
Canon New Zealand LId. Akoranga Business Park, AAOfanga Drive, Northcole, Auckland, New Zealand
Canon UK RCC. Unill30 Centennial Park Elslree HIli South, Borehamwood Elslree, Herts, WOO 3SE, United I(lngdom
Canon U.S.A., Inc. One canon Plaza Lake Success, NY 11042 U,S,A,
Canon Mexicana S,DE R,LDE C,V. Blvd, Manuel Avila Camacho No. 136 Col. Lomas de Chapultepec C,P 11000 MeXICO D.F., MEXICO
Canon Latin America, Inc, Miami 703 Waterford Way Sulle 400, Miami, FL 33126 U.S.A
Canon Sales Co, Japan 2-16-6, KoMan, Mlnato-ku, Tokyo 108-8011, Japan
Ca-o:..*.l CANON PHOTOGRAPHIC PRODUCTSII. ' •• INTERNATIONAL SERVICE NETVoJORK
*t>/:;1J)(51i1~i7-t:"7."
2Ra-Al. 'r.:r':\..\1t=t-t' / Y~~O)/lfJ!ld:, "'F12=t-t>.I /tlJI!.m!~ll!!Dl'::Z(f)~11t... ZS t) 3':~0 IjIg'H*~iE*" CU2Canon International Warranty
System(1)S'/m}vx-?) f1O)~8aICl:, !lAA~nrcl!l,\"jfi,i:$ic:o, E&7?'-?o)f1l,,\ft/lfl!~DI;:Z/itili7g~l!~as~ttL,Z(f)IJ~~0 ~1iEF'q~JI~a5
~(1(;:t&:~ill~ild:. !V~1*2iE.~j;gff-L "CFc!l.,\o 11it:iE.0)f$m-1l1~L '$[§J'\"t¥~iE.I;:~,&;'E~g .. ".J....BfJitcrL \!fil'8I;:1::f'i""*4c tJ, I]£~ 0
· /lfJlf"38('::J::?ZI;;', OO~il!~1lIJ(;:j13tL,rJ.11n(trJS9"". im~J::!JtJan1Ji1J'1J\~.t.i8-t>St)~v-o
· !B~I'::J::1J12EF"Ig~1i:J!9.~iiE?1Jiil5IJ*9o
· 31) A H':1I!~:lJli7-:-t:;;Z1MF.:W:>~~a?ttl;;.:§tt!!l&£o)/I!!!:g:D,",a5r.:lJL.,abttPl" '£9 0
Canon Photographic ProdL::ct Intern'allen'al service Network
Service or your Canon product witl be provided at any 01 the listed authorized service lacilities. Warranty service 01 products wilh international Warranty certiricate (with the
symbol e for Canon Inlernational Warranty System indicated above) will be provided at the listed selVice facilities marked @ in areas olher than the counlry or region
where the product was purchased, You must present your warranty certificate when requesting repairs during the warranty period. If no certificate is presented, or if the
warranly does nol bear lhe place and date of purchase, you will be charged the cosl 01 Ihe repairs.
• Some types or repair may require lhal parts be ordered specially. In tflis event.lhe repairs may lake longer than usual.
• The contenls or this document are subject to change without notice
CANON llUlllJllliliijilH,1"I
JU'rJ g';Hf(J(Jf:IMnlt~1l'!W:#IHm1j.f.1~1YJ CallOll f:Etref'rI"~ttH:lI:1JI,! 1r1't~ ,(£~'!k.I"';&~IY~t:!!I;¢~:<:ft!l.lKl;.(9Hn.tt!!lKmjf>l;iJHf e f;j; lLlJ'~~rJi:>lJI,!*!I!{~:UPlremfJt~tmU
OOf-T;(*iiE-h ImlLr.tfijfiJTmCall()ll1.tli~I!l~{¥"E,f Ijl-h ~u;nBifd¥iiF.-f;. &./¥.iiE--t'rokit:·!HiJ~1"I\MWifJifljftlE:fI',J]lH. fi:l!}JiH-·t)JtHIt!'fJlm
• -¥;~~itf;r\M~fIljliJf1m·e'{~Wj-HIJirli;JW:f4' < lfIJlt. rjJfili\ilWt'2-Ki¥J~nltJllitJ
• *~flrt.jWHfiJi1('l!a1 ..W::f~~HrlM~·,
CANON !wjjjllll;tJ~JIIUfl!l1
iUrJq,'t!ffNHfIOYlJI,!fU'l./!l.it>lilil,f.1Ht(J Canoll lil1tli'i,j-~Wltt~!tffii¥J {'H~'ttif..\I,f'M~·~lit.lt!!lat.("Hjtj.ft!!~jj'ij"~{i Ell ~i{cIY.rV!Ji:ilmmfi!.{fl.llPIlliWf!'iIij"'.f:J
~~f¥SO::f}lmrr J:[fjjfiJitliCa,,,,,, jtfllih!'l~wm:f,tnmIfJ~l· ~!.2:~l!ir):i!rir'il1~, -;E!efl!::l'-f;.If!.:(r:JW.l:!l
a Ij:l(T-ll::ln~fiLiO:i!1-, EX{¥.~i!f*ileil!I)tRI!'ri.u'?,il'~il'fiVifll UW1~. rofm1:f--I'I)~J1II.'t!ff1
• rl~re!A~o7.I'M~J,!ltQrff~&:·;,f!t#ijlJrH~'i?f't· [!;JJlt. ul~~~tx'I~:l'l~»:JJ.IIIJlnJ
• *Xf4'IAj"(;{J fifrlSfi1!a#· .~\'F5j f-r#',;jWeltweites Kundendienstnetz fur Canon Kameras
Ihr Canon ProdUkt wird bei jeder der aufgelisteten autorisierten Kundendicnststellen gewar1el und reparierl. Garantieleistungen fUr Produkte mil der Inlernationalen Garanlrekarle
(gekennzerchnet mil dem Symbol e IUr das Inlernalionale Canon Garantiesyslem) emallen Sie in anderen Gebieten als dem Land oder der Region, wo das Produkt gekauft wurde,
bei den in der Lisle m~ e gekennzeichnelen Kundendienslstellen. Wenn Sie das Produkt wahrend der Garantiezeit zur Reparatur geben. mussen Sie Ihre Garantiekarte vortegen
Wenn Sle keine Garanliekarte vorlegen oder wenn die Garanliekarte nichl den Ort und das Dalum des Kaufs tragI, werden Ihnen die Koslen der Reparalur in Rechnung gestelll
• E':inige Arten von Reparaturen konnen die Bestellung spezieller Teile erioroem, In diesem Fall kann die Reparatur langer als normal dauem
• Anderungen des Inhalts dieses Dokuments sind ohne Vorankiindigung vortehallen
Reseau International des Services Canon Appareil-Photo
Volre appareil Canon pourra etre repara dans un des centres de saNice apres·venle agrees indiques dans la lisle ci·dessous. II sara repare SOUS garantie contre presentation
du Certificat de Garantie (avec la marque e du Sysleme de Garantie Internatlonale Canon) dans les centres de seNiee apres·vente indiques par la marque $ dans les pays
ou regionsautresqueceluioli Ie produit a ete achete, Vausdevrezpresentervotrecertiricaldegaranliepourtoutedemande de reparalion pendant la periode de validite de
la garanlie. Toulefois,les reparalions seront avos rrais si vous ne presenlez pas votre garantie ou si elle ne comporte ni radresse du revendeur ni la dale d'achat du produil.
• Certaines reparations peuvenl necessiter des commandes de pieces speciales. Dans ce cas. elles peuvenl durer plus longtemps que prevu
• Le contenu de ce document peut faire robjet de modificalions sans preavis
Rele Di Asslstenza Internazlonale Per Folocamere Canon
L'Assistenza del prodolto Canen acquistato sara romita presso uno qualsiasi dei cenlri di assistenza autorizzati riportati nella lisla.
L'assistenza in garanzia di prodoni con certificalo di garanzia inlemazionale (con il simbolo \II per il sislema di garanzia intemazionale Canon sr;Jpra indicalo) sara lomita
prasso i cenlri di assislenza riportati nella lisla conlrassegnali cia @ in aree diverse dal paase 0 dalla regione in cui estalo acquistato il proclotlo. E necessario presentare il
certificato di garanzia di cui si e in possesso quando si rechiedono prestazioni di assistenza duranle il periodo dr validita della garanzia. sa non si presenta II certificale, 0
se lagaranzia non reca Ie indicazioni del luego e della data di acquislo,la riparazione sara a pagamento
• Per alcuni lipi di riparazione puo essere necessario ordinare a parte i peni di ricambio. In questo caso. la riparazione richiedera pili tempo del normale
• II contenulo di queslo documenlo e soggello a modihche senza preavviso
Sistema Internacional de Servicio de Camaras Fotograficas Canon
EI sarvicro de su produclo Canon sera proporcionado por cualquiera de las instalaciones de seNicio aulorizadas mencionadas en la lista. EI seNicio de garanlia de los
productos con certilicaclo de Garantia Internacional (con el simbolo oil> del Sislema de Garanlia Internaclonal de Canon indicado arriba) sera proporcionado por las
instalaciones de seNiclo que figuran en la Iisla con la marca oiI>, en elras areas dislintas del pais 0 de la region donoe sa adquiri6 el producto. Cualquier solicitud de
repalaci6n durante el periodo de garantia se realizara al presentar el certificado de garantia debidamente lIenado incluyende ellugar y la fecha de compra, en case de no
serasilareparacionseraconcargoalcliente.
• Algunos tipos de reparaciones podrian requerir un pedido especial de repuestos. En tal caso, las reparaciones podrian clamorar mas de 10 habitual
• Los contenidos de eSle documento se encuentran sujetes a cambios sin previo aviso.
hl*Ii-,.,_;w..1tliii:"'§I#1,nij. j1iFoQU a • Ili,I.j,@iIe61.,j@;;;.I.••
REGIONAL e CANON LATIN AMERICA, INC. Phone: 1·305·260·7400
HEADQUARTERS (Except Mexico)
'For service center localion. please visit our website or conlacllhe phone number above.
jiiMh i a 111.1.1.&;.1.';111
Phone: (673) 02·653001
Phone· (855) 023·428955
Fax: (855) 023-722961
Phone: (86) 010·9517·7178
Phone: (91)-012-45160000
I"al\: (91 )-0 t2-45 H300 1,
Phone: (82) 02-2017·8600
Fax: (82) 02·2017·8796
Phone: (95) 01-202-092
Fax· (95) 01-202-079
Phone: (92) 021-438·9581
Fax: (92) 021-438-9589
Phone: (94) 01·12437797
Fax: (94) 01·12448980
Phone· (977) 01·422-4079
Fax: (977) 01-422-9358
Phone: (62) 021·424·4204
Fax: (62) 021-424-7017
Phone: (7) 095-258600
Phone: (356) 448466
Phone: (965) 2-44810315
Phone· (968) 705153
Phone (971) 04-3534168
Phone: (961) 01-582-000
Phone· (372) 630-0530
Phone: (371) 720·4444
Phone (370) 8700-555-78
Phone· 13·13-83'
'Within Australia only
(61) 02-9805·2555
Fax: (61) 02-9888-3314
Phone 08·51992369
Phone· 0848-833-838
Phone 08·705-143723
Phone (420) 02·25280·111
Phone (420) 02-22721-525
Phone (36) 01-2668085
Phone: (48) 022-572-30-00
Phone· (48) 022·862·41·38
Phone (421) 02-5441·4880
Phone (357) 25·384306
(357) 25-568274
Phone: (98) 021-8752442
Phone: (972) 03-6888525
Phone: (966) 02·6970779/
6970652
Phone (27) 011·2667162PO. Box 1782 Hallway House 1685
Johannesburg
htlp:f/www.canon.se
htlp:flwww.canon.ch
hltp:llwww.canon,co.uk
16000 Praha 6
Milesovska 1. 130 00 Praha 3
Somogy 1. Bela u. 10, 1085 Budapest
httpJ/www.canon.pl
ul Zytnia 15.01-014 Warszawa
Aadlinskel10 26. 811 07 Bralislava
115 Omol'lias Avenue Paroulis Building,
3045 Lirnassol
127, South $ohrevardi Avenue
PO. Box 11365/1167. Tehran
50 Anilevitch St, Tel Aviv 67060
P.O. Box 1796. Jeddah 21441
Kosmodamianskaya nab. 52. Building 3.
5th Floor 113054 Moscow
http://www.pcutajar.com.ml
P.O. Box 974 5afat13008
P.O. Box 3139. Ruwi 112
PO.Box 284 Dubai
460 CorniChe AI-Nahr. Beirut
http://www.canon.ee
htlp:llwww.canon.lv
htlp:l/www.canon.lt
'Service tacilities lisled below are nOI "International Warranty Members"
They do not accepl any warranty repair but may assist you when the repair charge is acceptable
• Interhouse Company
No.5 & 6, Bunut Jaya Complex, Simpang 574,
Km 7 1/4, Jalan Tutong. Bandar Seri Begawan 2690, Brunei Darussalam
• Royal Cambodia Co., Ltd.
437 Preah Monivong Boulevard. Phnom Penh, Kingdom of Cambodia
• Canon(China)Co., Ltd.
15F Jinbao Building No. 89 Jinbao Street. Dongcheng Districl. Beijing 100005. China
• Canon India Pte. lid.
2nd Floor, Tower A & B Cybcr Greens. DLF Phase III Gurgaon·122 002. Haryana, India
• Canon Korea Consumer Imaging Inc. Canon Support Center
2F Samwhan Artnubeau III. 209 Nonhyun 2 Dong. Kangnam·gu. SeoUl
• Accellnternational Co., Ltd.
Level 6, FJV Commercial Centre, 422-426 Strand Road, Botataung. Township, Yangon
• Global Systems
39-C/1, Block-5, P.E.C,H.S 011: Shahrah-e- Faisal, behind Jason Trade Centre, Karachi 75400
• Homebase(Pvt.)Llmited
No.85 Braybrooke Place, Colombo 02. Sri Lanka
• Primax International Inc.
3rd Floor, MaitfY Bhavan, New Road, Kathmandu. Nepal
• PT Dalascrip
JI. Angkasa no 18 BO.Jakarta. Indonesia
• P.Cutajar
• Naser Mohammed, AI Sayer Comm.Co.
·GENETCO
• Khoory Electronics
• Image System sal
• AS KTK Overall
• Canon North-East Oy
• Canon North-East Oy
'For service center tocation. please contact the phone number above.
$ Canon South Africa.
$ CANON AUSTRALIA PTY. LTD.
$ Canon Nordic Regional Competence Center
E& Canon Schwelz AG
(£l Canon UK Regional Competence Center
Ei' AWH service
® Camera Kft
(£l Canon Polska SP.Z.O.O.
$ CSt Foto Video
E& Pro Lalka
EIJ NT. KakoylannlsfParoutis Electronics Ltd.
I'B Aphomar Co. ltd.
EEl Karat Israel lid.
(£I AIQuralshi Leisure Services
SRI LANKA
SWEDEN
SWITZERLAND
UNITED KINGDOM
CZECH REP.
ASIA
BRUNEI
IRAN
HUNGARY
POLAND
REGIONAL
HEADQUARTERS
CAMBODIA
SLOVAKIA
CYPRUS
ISRAEL
SAUDI ARABIA
SOUTH AFRICA
MYANMAR
PAKISTAN
MALTA
KUWAIT
OMAN
UA.
LEBANON
ESTONIA
LATVIA
LITHUANIA
CHINA
INDIA
KOREA
INDONESIA
EUROPE/MIDDLE EAST/AFRICA -----------------------------
CIS • Canon Representative Office
NEW ZEALAND E!l Canon New Zealand Ltd. Phone: (64) 09-489-0470
Akoranga Business Park. Akoranga Drive Northcote, Auckland. New Zealand
1''''#I.,m,
jl1l'ili' a a '11.'.!.ill
Phone (31) 020-545-8545
Fax: (31) 020·545-8211
Phone· 0810·081009
Phone: 070-300-012
Phone· 70-2055-15
Phone: 020-366-466
Phone 0825·002·923
Phone 0180-500-6022
Phone: (30) 0210-955-4000
Phone: (354) 533·3411
Phone: (353) 01890-200·563
Phone 848-800·519
Phone: 27·302-054
Phone· 0900-202-2915
Phone 235-00143
Phone: (351) 021-3242830
Phone: (386) 01-5461000
Phone: 901900012
Phone: (81) 03-3455-9353
Phone: 1-800-828-4040
'Wilhin Canada only
Phone· 01-800-710-7168'
'Within MexiCO only
(52) 052-494-905
Fax: (52) 052-494-944
Phone: 1-800·828-4040
'WithinU50nly
Phone: (852) 2170 2888
Fax· (852) 2428-3963
Phone: (60) 03-7845·0055
Fax: (60) 03·7844·6044
Phone: (63) 02-812·6047
Fax· (63) 02-812-0067
Phone: (65) 6799-8888
Fax (65) 6799-8882
Phone: (886)02-2571-1166
Fax (886) 02-2537-1169
Phone: (66) 02-344-9999
Fax· (66) 02-344-9910
ii1FoQU j a ;;I.,mRM.mAl.!;
iill.pn • , li@i%h!.l.H3 ,,,I
3!l'iIi' ;sa '11.1·I.'M6;;.I.·'
r" )- Country & Area Code
ij'l£iiW!ll&1ii&iiid
j1il'ili' ; i ;;;.,.,,;gIi"im:a:a:mJ
I!l CANON MEXICANA, S.DE R.L. DE C.V.
Manuel Avila Camacho No. 138. PB Y piscs 15, \6 Y 17 Col. Lomas de
Chapullepec Delegacion Miguel Hidalgo. C.P. 11000 Mexico, D,F.
'For service center location, please contact the phone number above or send an e·mailto:
canonmx_soporte@cusa.canon,com
61 Canon HongKong Co. Ltd." Dome5tic Sales Office
11/F Oterprise Square. 26 Nathan Road. Tsim Sha Tsui Kowloon, Hong Kong
Ell Canon Marketing (Malaysia) Sdn. Bhd.
Block D. Peremba Square. Saujana Resort. Sechon U2. 40150 Shah Alam.
Selangor Darul Ehsan Malaysia
E!l Canon Markellng (Philippines) Inc.
Marvin Plaza Building. 2153 Don Chino Roces Ave. Makati Cily, Metro Manila
$ Canon Singapore PIe. Ltd.
1 HarbourFront Avenue #04-01 Keppel Bay Tower Singapore 098632
<$ Rainbow Photo & Image Equipment Co. Ltd.
No. 20 Chiling Road. Taipei 10424, Taiwan
e Canon Marketing (Thailand) Co.Ltd
10lh Floor. Bangkok City Tower. 179/34·45 Soulh Sathorn Road, Bangkok 10120
'For service cenler location, please visit our website or contact the phone number above.
SINGAPORE
"For service cenler location, please visit our website or contact the phone number above
REGIONAL e CANON MARKETING JAPAN INC.
HEADQUARTERS
'For service cenler location, please contacllhe phone number above
HONG KONG
MALAYSIA
REGiONAL (fl CANON U.S.A., INC.
HEADQUARTERS
For suppon please visit: http://www.support.canon-europe.com
REGIONAL I!l CANON EUROPA N.V
HEADQUARTERS P.O. Box 2262, Bovenkerkerweg 59-611180 EG Am5telveen, The Netherlands
'For general Inquiry only. For repair. please contact one of service center listed below.
'Wilhin Local oniy for non-Counlry & Area Code No
AUSTRIA EEl Canon Ges.m.b.H http://www.canon.at
BELGIUM 61 Canon Belgium N.V./ S.A. hllp://www.canon.be
DENMARK E!l Canon Denmark http://www.canon.dk
FINLAND e Canon Oy hllp://www.canon.li
FRANCE ® Canon France Regional Competence Center http://www.canon.lf
GERMANY (tl Canon Germany Regional Competence Center http://www.canon.de
GREECE (tllntersys SA hllp:llwww.intersyS.gr
ICELAND IRELAND 61 Canon Ireland Ltd. hllp://www.canon.ie
ITALY LUXEMBOURG THE NETHERLANDS $ Canon Nederland N.V http://www.canon.nl
NORWAY @ Canon Norge AJS http://www.canon.no
PORTUGAL SLOVENIA (f1 3A AUDIO VIDEO Servis hllp://www.3a·servis.si
SPAIN $ Canon Espana, S.A. Joaquin Costa. 4 I. 28002 Madrid
THAILANO
REGIONAL
HEADQUARTERS
PHILIPPINES
REGIONAL
HEADQUARTERS
"piii#l.l..i',ii:a::....la.. i 1#1'11",
1-\.1,.
,.,.p,...,.
111§f1l._

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10