Digital Blood Pressure Monitor Model UA-767 BT - A&D Company ...

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

pressure, blood, cuff, your, device, with, batteries, that, cuff., measurement, adult, Measurement, during, measurement., English, when, Blood, Pressure, will, mmHg, pulse, have, cause, this, adapter, Cuff, Proper, range, Battery, systolic

Transcript

Digital Blood Pressure Monitor
Model UA-767 BT
Instruction Manual
Original
Manuel d’instructions
Traduction
Manual de Instrucciones
Traducción
Manuale di Istruzioni
Traduzione
Bedienungsanleitung
Übersetzung
Gebruiksaanwijzing
Vertaling
使用手冊
1WMPD4001357D 翻譯
English 1
Contents
Dear Customers.................................................................... 1
Preliminary Remarks ............................................................. 2
Precautions........................................................................... 2
Parts Identification................................................................ 4
Symbols................................................................................ 5
Using the Monitor ................................................................. 6
Installing / Changing the Batteries ................................. 6
Connecting the Air Hose................................................. 6
Connecting the AC Adapter ............................................ 6
Selecting the Correct Cuff Size ....................................... 7
Applying the Arm Cuff.................................................... 8
How to Take Proper Measurements................................... 8
Measurement ................................................................. 8
After Measurement......................................................... 8
Measurements ...................................................................... 9
Normal Measurement ..................................................... 9
Measurement with the Desired Systolic Pressure........... 10
Notes for Proper Measurement ..................................... 10
What is an Irregular Heartbeat............................................. 11
Pressure Bar Indicator ......................................................... 11
How the Wireless Connection Works ................................... 11
About Blood Pressure.......................................................... 12
What is Blood Pressure?................................................ 12
What is Hypertension and How is it Controlled? ............ 12
Why Measure Blood Pressure at Home?......................... 12
WHO Blood Pressure Classification ............................... 12
Blood Pressure Variations............................................. 12
Troubleshooting ................................................................. 13
Maintenance ....................................................................... 14
Technical Data.................................................................... 14
Dear Customers
Congratulations on purchasing a state-of-the-art A&D blood pressure
monitor, one of the most advanced monitors available today. Designed
for ease of use and accuracy, this device will facilitate your daily blood
pressure regimen.
We recommend that you read through this manual carefully before
using the device for the first time.
English 2
Preliminary Remarks
This device conforms to the European Directive 93/42 EEC for Medical
Products. This is made evident by the mark of conformity.
(0123: The reference number to the involved notified body)
The device complies with the statutory EMC (Electromagnetic
Compatibility) directive 89/336/EEC. The WML-40AH is approved in
accordance to R&TTE directive transmitter module marked by ,
manufactured by MITSUMI incorporated to OEM product.
The device complies with part 15 of the FCC rules and contains the FCC
ID POOWML-C40.
Compliance with Industry Canada. IC: 4250A-WMLC40.
The device is designed for use on adults only, not newborns or infants.
Environment for use: The device is for use in the home healthcare environment.
This device is designed to measure blood pressure and pulse rate of
people for diagnosis.
Precautions
Precision components are used in this device. Extreme temperature,
humidity, direct sunlight, shock or dust should be avoided.
Clean the device and cuff with a dry, soft cloth or a cloth dampened with
water and a neutral detergent. Never use alcohol, benzene, thinner or
other harsh chemicals to clean the device or cuff.
Avoid tightly folding the cuff or storing the hose tightly twisted for long
periods, as such treatment may shorten the life of the components.
The device and cuff are not water resistant. Prevent rain, sweat and water
from soiling the device and cuff.
Measurements may be affected if the device is used near a television,
microwave oven, cellular telephone, X-ray or other devices that emit
electromagnetic waves.
Used equipment, parts and batteries are not treated as ordinary household
waste, and must be disposed of according to the applicable local
regulations.
When the AC adapter is used, make sure that the AC adapter can be
readily removed from the electrical outlet when necessary.
When reusing the device, confirm that the device is clean.
Do not modify the device. It may cause accidents or damage to the device.
English 3
To measure blood pressure, the arm must be squeezed by the cuff hard
enough to temporarily stop blood flow through the artery. This may cause
pain, numbness or a temporary red mark to the arm. This condition will
appear especially when measurement is repeated successively. Any pain,
numbness, or red marks will disappear with time.
Contraindications
The following are precautions for proper use of the device.
Do not apply the cuff on an arm with another medical electrical equipment
attached. The equipment may not function properly.
People who have a severe circulatory deficit in the arm must consult a
doctor before using the device, to avoid medical problems.
Do not self-diagnose the measurement results and start treatment by
yourself. Always consult your doctor for evaluation of the results and
treatment.
Do not apply the cuff on an arm with an unhealed wound.
Do not apply the cuff on an arm receiving an intravenous drip or blood
transfusion.
It may cause injury or accidents.
Do not use the device where flammable gases such as anesthetic gases
are present. It may cause an explosion.
Do not use the device in highly concentrated oxygen environments, such
as a high-pressure oxygen chamber or an oxygen tent. It may cause a fire
or explosion.
English 4
Parts Identification
Part of Display
Pressure Bar Indicator
MEMORY Systolic Pressure
Diastolic Pressure
Pulse Rate
Battery Indicator
I.H.B. Indicator (Irregular heartbeat indicator)
Heart Mark
Display
Air Connector Plug
Air Socket
Arm Cuff
DC Jack
START Button
Air Hose
Index Mark
Proper Fit Range
Artery Position Mark
Battery Cover
1.5V Batteries
(R6P or AA)
Battery Compartment
English 5
Symbols
Symbols Function / Meaning Recommended Action
Standby and power on.
Battery installation guide
Direct current
SN Serial number
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Measurement is in
progress. Remain as still as
possible.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an
irregular heartbeat or any excessive
body movement is detected during the
measurement.
Previous measurements stored in MEMORY.
Full Battery
The battery power indicator during the
measurement.
Low Battery
The indicator blinks when battery power
is low.
Replace all batteries with
new ones, when the
indicator blinks.
Unstable blood pressure due to
movement during the measurement.
Try the measurement
again. Remain very still
during the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
PUL. DISPLAY ERROR The pulse is not detected correctly.
Fasten the cuff correctly,
and try the measurement
again.
SYS Systolic blood pressure in mmHg
DIA Diastolic blood pressure in mmHg.
PUL./min Pulse per minute
EC directive medical device label
R&TTE directive transmitter module label
WEEE label
Manufacturer
REPEC EU-representative
Class II device
Refer to instruction manual/booklet
Polarity of DC jack
English 6
Using the Monitor
Installing / Changing the Batteries
1. Slide the battery cover up to open it.
2. Remove the used batteries and insert
new batteries into the battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Slide the battery cover down to close.
Use only R6P, AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the
device will not work.
When (LOW BATTERY mark) blinks in the display, replace all batteries
with new ones. Do not mix old and new batteries. It may shorten the
battery life, or cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at
low temperatures.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device
are for testing monitor performance and may have a limited life.
Connecting the Air Hose
Insert the air connector plug
into the air socket firmly.
Connecting the AC Adapter
Insert the AC adapter plug into the
DC jack.
Next, connect the AC adapter to
an electrical outlet.
Use the specified AC adapter.
(Refer to page 15.)
Step 1
Step 3
Step 2
AC adapter plug
DC jack
Air Connector Plug
Air Socket
Air Hose
English 7
Using the Monitor
Selecting the Correct Cuff Size
Using the correct cuff size is important for an accurate reading. If the cuff is not the
proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index and proper fit range, on the cuff, tell you if you are applying the correct
cuff. (Refer to "Applying The Arm Cuff" on the next page. )
If the index points outside of the range, contact your local dealer to purchase a
replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size Recommended Cuff Size Catalog Number
32 cm to 45 cm Large adult cuff CUF-D-LA
22 cm to 32 cm Adult Cuff CUF-D-A
Arm size: The circumference of the biceps.
Note: Model UA-767 BT is not designed for using a small adult cuff.
Symbols that are printed on the cuff
Symbols Function/Meaning Recommended Action
Artery position mark
Set the mark on the artery of
the upper arm or in line with the
ring finger on the inside of the arm.
▲ Index
REF Catalog number
Proper fit range for the adult cuff.
It's printed on the adult cuff.
Range to use the large adult cuff.
Over range printed on the adult cuff.
Use the large adult cuff instead of
the adult cuff.
Proper fit range for the large adult cuff.
It's printed on the large adult cuff.
Under range printed on the adult cuff.
Range to use the adult cuff.
It's printed on the large adult cuff.
Use the adult cuff instead of the
large adult cuff.
Lot number
.
Large adult cuff
Proper fit range
Adult cuff
Proper fit range
English 8
Using the Monitor
Applying the Arm Cuff
1. Wrap the cuff around the upper arm,
about 1-2 cm above the inside of
the elbow, as shown.
Place the cuff directly against the
skin, as clothing may cause a faint
pulse, and result in a measurement
error.
2. Constriction of the upper arm,
caused by tightly rolling up a
shirtsleeve, may prevent accurate
readings.
3. Confirm that the index points
within the proper fit range.
How to Take Proper Measurements
For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your
legs. Keep your feet on the floor and straighten your back.
Relax before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure immediately after physical exercise or a bath. Rest before
taking the measurement.
Try to measure your blood pressure at the same time every day.
Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be
alarmed)
After Measurement
After measurement, press the START button to turn off the power.
Remove the cuff and record your data.
Note: The device has an automatic power shut-off function, which turns the
power off approximately one minute after measurement.
Allow at least three minutes between measurements on the same person.
Do not roll up shirtsleeve tightly
1 to 2 cm
Air hose
Cuff
Index and Proper fit range
Artery position mark
Secure the fabric
fastener firmly
English 9
Measurements
Model UA-767 BT is designed to detect the pulse and to inflate the
cuff to a systolic pressure level automatically.
If your systolic pressure is expected to exceed 230 mmHg or you use the
optional small cuff, read "Measurement with the desired systolic
pressure" on the next page.
Normal Measurement
1. Place the cuff on the arm (preferably the left arm).
Sit quietly during measurement.
2. Press the START button.
The last data of systolic and diastolic
pressure and pulse rate are displayed
briefly. Then the display changes, as
indicated in the figure at the right, as the
measurement begins. The cuff starts to
inflate. It is normal for the cuff to feel very
tight. A pressure bar indicator is displayed,
as in the figure at the right, during inflation.
Note: If you wish to stop inflation at any time,
press the START button again.
3. When inflation is complete, deflation starts
automatically and the (heart mark)
blinks, indicating that the measurement is
in progress. Once the pulse is detected,
the mark blinks with each pulse beat.
Note: If an appropriate pressure is not
obtained, the device starts to inflate
again automatically.
4. When the measurement is complete, the
systolic and diastolic pressure readings and
pulse rate are displayed. The cuff exhausts
the remaining air and deflates completely.
5. Press the START button again to turn
off the power.
Note: Model UA-767 BT is provided with an automatic power
shut-off function. Allow at least three minutes between
measurements on the same person.
At heart level
The last data
at initial display
Starts inflation
Pressurizing
Measurement
in progress
Systolic pressure
Diastolic pressure
Pulse rate
Exhausts remaining
air automatically
START button
English 10
Measurements
Measurement with the Desired Systolic Pressure
If your systolic pressure is expected to exceed 230 mmHg or you use the
optional small cuff, use this procedure.
1. Place the cuff on the arm (preferably the left arm).
2. Press and hold the START button
until a number about 30 to 40 mmHg
higher than your expected systolic
pressure appears.
3. Release the START button to start
measurement, when the desired
number is reached. Then continue to
measure your blood pressure as
described on the previous page.
Notes for Proper Measurement
Sit down in a comfortable position. Place the arm to be used for the
measurement on a table or other support so that the center of the cuff
will be at the same height as your heart.
Relax for about five or ten minutes before taking a measurement. If you
are excited or depressed by emotional stress, the measurement will
reflect this stress as a higher (or lower) than normal blood pressure
reading and the pulse reading will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you
are doing and what you have eaten. What you drink can have a very
strong and rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very
weak or irregular heartbeat, the device may have difficulty determining
your blood pressure.
Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. See page 5 for the
description of symbols.
This blood pressure monitor is intended for use by adults only. Consult
with your physician before using this device on a child. A child should not
use this device unattended.
Refer to the previous page
for measurement
Press and hold the button
At heart level
Release the button
at the desired
systolic pressure
English 11
What is an Irregular Heartbeat
Model UA-767 BT blood pressure monitor provides a blood
pressure and pulse rate measurement even when an irregular heartbeat
occurs. An irregular heartbeat is defined as a heartbeat that varies by
25% from the average of all heartbeats during the blood pressure
measurement. It is important that you be relaxed, remain still and do not
talk during measurements.
Note: We recommend contacting your physician if you see this
indicator frequently.
Pressure Bar Indicator
The indicator monitors the progress of pressure during measurement.
How the Wireless Connection Works
At the end of the measurement, your blood pressure will be sent
automatically to your health monitoring device. You do not need to do
anything. If the health monitoring device is not working or is not within
range of the blood pressure monitor, the blood pressure will be stored in
the blood pressure monitor's memory (up to 40 sets).
Inflation complete
Pressurizing
Inflation in progress Measurement in progress
Releasing air
English 12
Reference Material: Journal of Hypertension 1999, Vol 17 No.2
mmHg
110
105
100
95
90
85
80
Optimal
120 130 140 150 160 170 180
Systolic blood pressure mmHg
Normal
High-normal
Grade 1 hypertension (mild)
Grade 2 hypertension (moderate)
Grade 3 hypertension (severe)
D
ia st ol ic bl oo d pr es su re About Blood Pressure
What is Blood Pressure?
Blood pressure is the force exerted by blood against the walls of the arteries.
Systolic pressure occurs when the heart contracts. Diastolic pressure occurs
when the heart expands. Blood pressure is measured in millimeters of
mercury (mmHg). One's natural blood pressure is represented by the
fundamental pressure, which is measured first thing in the morning while one
is still at rest and before eating.
What is Hypertension and How is it Controlled?
Hypertension, an abnormally high arterial blood pressure, if left unattended,
can cause many health problems including stroke and heart attack.
Hypertension can be controlled by altering lifestyle, avoiding stress, and with
medication under a doctor’s supervision.
To prevent hypertension or keep it under control:
Do not smoke Exercise regularly
Reduce salt and fat intake Have regular physical checkups
Maintain proper weight
Why Measure Blood Pressure at Home?
Blood pressure measured at a clinic or doctor's office may cause
apprehension and can produce an elevated reading, 25 to 30 mmHg higher
than that measured at home. Home measurement reduces the effects of
outside influences on blood pressure readings, supplements the doctor's
readings and provides a more accurate, complete blood pressure history.
WHO Blood Pressure Classification
Standards to assess high
blood pressure, without
regard to age, have been
established by the World
Health Organization (WHO),
as shown in the chart.
Blood Pressure Variations
An individual’s blood pressure
varies greatly on a daily and
seasonal basis. It may vary by
30 to 50 mmHg due to various conditions during the day. In hypertensive
individuals’ variations are even more pronounced. Normally, the blood
pressure rises while at work or play and falls to its lowest levels during sleep.
So, do not be overly concerned by the results of one measurement.
Take measurements at the same time every day using the procedure
English 13
Typical fluctuation within a day
(Measured every five minutes)
PM AM Time
D
ia st ol ic bl oo d pr es su re Systolic
Diastolic Sleep
described in this manual to get to know your
normal blood pressure. Regular readings give
a more comprehensive blood pressure history.
Be sure to note date and time when recording
your blood pressure. Consult your doctor to
interpret your blood pressure data.
Troubleshooting
Problem Possible Reason Recommended Action
Batteries are drained. Replace all batteries with new ones.Nothing appears
in the display,
even when the
power is turned
on.
Battery terminals are not
in the correct position.
Reinstall the batteries with
negative and positive terminals
matching those indicated on the
battery compartment.
The cuff does
not inflate.
Battery power is low.
(LOW BATTERY
mark) blinks. [ If the
batteries are drained
completely, the mark
does not appear.]
Replace all batteries with new
ones.
The cuff is not fastened
properly. Fasten the cuff correctly.
You moved your arm or
body during the
measurement.
Make sure you remain very still
and quiet during the
measurement.
The cuff position is not
correct.
Sit comfortably and still.
Raise your hand so that the cuff is
at the same level as your heart.
The unit does
not measure.
Readings are
too high or too
low.
If you have a very weak or
irregular heat beat, the device may
have difficulty in determining your
blood pressure.
The value is different
from that measured at a
clinic or doctor’s office.
See “Why measure blood
pressure at home”.
Other
Remove the batteries. Place them
back properly and try the
measurement again.
Note: If the actions described above do not solve the problem, contact the
dealer. Do not attempt to open or repair this product, as any attempt to do
so will make your warranty invalid.
English 14
Maintenance
Do not open the device. It uses delicate electrical components and an
intricate air unit that could be damaged. If you cannot fix the problem
using the troubleshooting instructions, request service from your dealer
or from the A&D service group. The A&D service group will provide
technical information, spare parts and units to authorized dealers.
The device was designed and manufactured for a long service life.
However it is generally recommended to have the monitor inspected
every 2 years, to ensure proper functioning and accuracy. Please contact
either your authorized dealer or A&D for maintenance.
Technical Data
Type UA-767PBT / UA-767PBT-G
Measurement method Oscillometric measurement
Measurement range Pressure: 20 - 280 mmHg
Pulse: 40 - 200 beats / minute
Measurement accuracy Pressure: ±3 mmHg
Pulse: ±5%
Power supply 4 x 1.5V batteries (R6P, LR6 or AA) or
AC adapter (TB-233) (Not included)
Number of measurements Approximately 450 measurements, when
AA Alkaline batteries are used, with
pressure value of 180 mmHg at room
temperature of 23 °C.
Classification Internally powered ME equipment (Supplied by
batteries) /
Class II (Supplied by adapter)
Continuous operation mode
Clinical test According to ANSI / AAMI SP-10 1992
EMC IEC 60601-1-2: 2007
Memory 40 measurements
Operating condition +10 °C to +40 °C / 15 %RH to 85 %RH /
800 hPa to 1060 hPa
Transport / Storage condition -10 °C to +60 °C / 15 %RH to 85 %RH
Dimensions Approx. 147 [W] x 64 [H] x 110 [D] mm
Weight Approx. 300 g, excluding the batteries
English 15
Applied part Cuff Type BF
Useful life Device: 5 years (when used six times a day)
Cuff: 2 years (when used six times a day)
Wireless communication WML-40AH (MITSUMI Electronics Co. Ltd.)
Accessory AC adapter The adapter is to connect the device to a power
source at home.
TB-233 Please contact your local A&D dealer for
purchasing.
The AC adapter is required to be inspected or
replaced periodically.
TB-233C Input: 100-240V
Output: 6V 500mA
TB-233BF Input: 100-240V
Output: 6V 500mA
Accessories sold separately
Note: Specifications are subject to change without prior notice.
EMC table information is listed on our website:
http://www.aandd.jp/products/manual/medical/emc_acadapter_en.pdf
Cuff Catalog Number Cuff Size Arm Size
CUF-D-LA Large adult cuff 32 cm to 45 cm
CUF-D-A Adult cuff 22 cm to 32 cm
AC adapter Catalog Number Plug (Outlet type)
TB-233C Type C
TB-233BF Type BF
139°C 2A
139°C 2A
1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN
Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119
A&D INSTRUMENTS LIMITED
Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom
Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485
A&D ENGINEERING, INC.
1756 Automation Parkway, San Jose, California 95131 U.S.A.
Telephone: [1] (408) 263-5333 Fax: [1] (408)263-0119
A&D AUSTRALASIA PTY LTD
32 Dew Street, Thebarton, South Australia 5031 AUSTRALIA
Telephone: [61] (8) 8301-8100 Fax: [61] (8) 8352-7409

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10