Accessories - Ebm-papst

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

size, with, Part, guards, Connection, speed, Wire, Tach, Material:, Finger, change, series, filter, centrifugal, voltage, Subject, protection, 0-10, input, Filter, wire, fans, guard, Vers., steel, Control, Blue, Adjustable, Speed, Outlet

Transcript

241
Accessories
Finger guards 242
Filter fan guards 250
Inlet rings 252
Connection cables / Accessories 255
Connection diagrams 258
ebm-papst offers a comprehensive selection of accessories for optimum
fan operation, from temperature sensors for speed-controlled fans, to
finger guards for all variants, to cables, filters, and screens, to spacers
and installation parts. Even in the case of very special parts, you can
be sure: We will assist you every way possible. The sales experts at
ebm-papst will be happy to assist you with your question concerning
fan installation and use.
From selection to accessories:
Insist on the efficient and reliable service provided by ebm-papst.
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
242
20
16
-0
1
Finger guards
– Material: Galvanized or nickel-plated steel wire
– Note: Finger guard according to DIN EN ISO 13857 (previously EN 294).
Additional finger guards that do not satisfy DIN EN ISO 13857 available on
request.
Our finger guards are designed specifically to be uses with ebm-papst fans.
They combine the highest degree of safety with minimum effect on the operating
noise. Please note that the safety-related clearances cannot be guaranteed when
finger guards made by other manufacturers are used.
LZ29-1 Fan size 40 x 40
5
0
59
30
2
4,2+1
+0,3
+0,5
4,
2
0,
5
50
LZ28-1 Fan size 60 x 60
82,5
82
,5
4,3
0,2+
_192
40 1+
2
4,7
0,3+
1+
LZ23-1 Fan size 92 x 92
2
4,7
0,3+
1+
71,5
71
,5
78,2
4,3
0,2+
0,5±
40 1+
LZ32-4 Fan size 80 x 80
42
4,8
1,8
4
2
4
,5
LZ31 Fan size 50 x 50
400 LZ29-1
420 J LZ29-1
500 LZ31
600 LZ28-1
3000 LZ23-1
8000 LZ32-4 / LZ22-2
9000 LZ30-4 / LZ 30 / LZ 30-3
4000 LZ30-4 / LZ 30 / LZ 30-3
Fan series Part no.
5100 LZ25
5600 LZ25
5200 LZ35
5300 LZ53
5900 LZ35
7000 LZ36
6300 LZ37
6400 LZ38
Fan series Part no.
2200 F LZ22
DV 4100 LZ30-4 Intake/outlet
DV 5200 LZ35 Intake/outlet
DV 6300 TD LZ37 Intake side
DV 6300 TD LZ52 Outlet side
DV 6400 LZ38 Intake side
DV 6400 LZ39 Outlet side
Subject to change
Fan series Part no. Side
4,3 2,5+0,2 +0,3
4
8
7
8
1
0
5
,5
1
1
+
0
,5
LZ22-2 Fan size 80 x 80
243
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
119 _1
51,5+1
2
4,7
+0,3
+1
10
4,
8
104,8
4,3
0,2+
LZ30-4 Fan size 119 x 119
4,3 5
3
+0,2 +1
±0,25
1
1
5
1
5
3
,5 ±

1
LZ30 Fan size 119 x 119 LZ30-3 Fan size 119 x 119
70
13
6,
5
6,45 1+
5
0,2
+
124,5 0,2+
LZ53 Fan size 140 x 140LZ25 Fan size 135 x 135LZ35 Fan size 127 x 127
LZ36 Fan size 150 x 172 LZ37 Fan size 172 x 51 LZ38 Fan size 172 x 51
LZ39 Fan size 172 x 51 LZ52 Fan size 172 x 51
19
9,
5
18
6,
5
)
(
8,45
27,5
5
0,
5
10,2
++
++
148,5
LZ22 Fan size 200 x 51
Also called LZ 30
for North America only.
244
20
16
-0
1
– Material: Galvanized or nickel-plated steel wire
– Note: Finger guard according to DIN EN ISO 13857 (previously EN 294).
The finger guard detailed on this page are intended specifically for the ACmaxx /
GreenTech EC tubeaxial fan ranges and are mounted on the outlet side.
51,5 4,7
2
4,
3
119
104,8
+1 +1
+0,3
+
0,
2
-1
1
0
4
,8
LZ30-9 Fan size 119 X 119
AC 8300 H LZ32-4 Intake
AC 8300 H LZ32-7 Outlet
AC 3200 J LZ23-1 Intake
AC 3200 J LZ23-6 Outlet
AC 4400 FN LZ30-4 Intake
AC 4400 FN LZ30-9 Outlet
AC 4300 LZ30-4 Intake
AC 4300 LZ30-9 Outlet
Fan series Part no. Side
ACi 4400 LZ30 Intake
ACi 4400 LZ30 Outlet
AC 6200 N LZ37 Intake
AC 6200 N LZ37-2 Outlet
Fan series Part no. Side
* Outlet-side guards on request
5
1
,5
1
6
2
Ø
158,9
4,3 6
2,5
±0,2
+
0
,5
0
,3
±0,5
LZ37-2 Fan size Ø 172 X 51
61
,1
0,
25
++
79
,8
0,
5
4,5 0,1+
12,9
6,3
0,3
0,3
+
+
71,5 0,2+
LZ32-7 Fan size 80 x 80
63
,789
4,5 0,1+
82,5 0,2+
7,3
LZ23-6 Fan size 92 x 92
Finger guards
– Material: Steel wire, plastic-coated,
with silver-metallic gloss
245
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
09418-2-4039 Fan size 250
W3G 200 78128-2-4039
Fan series Part no.
W1G 250 09418-2-4039
W3G 250 09418-2-4039
Fan series Part no.
Finger guards
78128-2-4039 Fan size 200
246
20
16
-0
1
– Material: Steel wire
Finger guards for centrifugal blowers with dual inlet
Part no. Fan size
83319-2-4039 097 (1)
a b c
96.0 3.5 71.0
09485-2-4039 097 (2) 114.0 3.5 88.0
09500-2-4039 133 / 146 145.0 4.0 122.0
(1) for D2E097-CH (2) for D2E097-B*Subject to change
Coating
Phosphated, plastic-coated in RAL no. 9005
Phosphated, plastic-coated in RAL no. 9005
Phosphated, plastic-coated in RAL no. 9005
– Material: Phosphated steel wire, plasticcoated, silver-metallic gloss
Finger guards for centrifugal blowers with dual inlet (versions with EW motor)
Part no. Fan size
35000-2-4039 160
a b c d e
182.0 12.0 144.0 2.4 4.5
Subject to change
Finger guards
247
20
16
-0
1
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s – Material: Welded screens made of hot-dip
galvanized steel, border made of tin
(0.4 mm thick)
Finger guards for centrifugal blowers with single inlet
Part no. Fan size
09489-2-4039 085 (3)
a b c
90.0 74.0 84.0
09490-2-4039 108 126.0 110.0 118.0
09494-2-4039 120 140.0 124.0 132.0
09492-2-4039 140 / 146 168.0 152.0 158.0
09503-2-4039 160 (4) 183.0 170.0 175.0
(3) 3 drilled holes staggered by 120°Subject to change
– Material: Steel wire
Finger guards for centrifugal blowers with single inlet
Part no. Fan size
09603-2-4039 076 / 085
a b c d e
101.0 6.0 79.0 4.3 8.0
98214-2-4039 108 120.0 3.5 88.0 4.3 8.0
25028-2-4039 140 / 146 162.0 8.5 139.0 4.3 8.0
17729-2-4039 160 175.0 3.5 139.0 4.6 7.0
Subject to change
(4) Fan size 160
Coating
Plastic coated, silver-metallic gloss
Plastic coated, silver-metallic gloss
Galvanized, chromatized in blue
Galvanized, chromatized in blue
Finger guards
248
20
16
-0
1
– Material: Fiberglass-reinforced plastic
– Note: Finger guard according to DIN EN ISO 13857 (previously EN 294).
Plastic guards may not be used for the following models:
8200 JH3 / JH4
3200 JH3 / JH4
4100 NH5 - NH8
Only suitable for bore hole diameter
¯ 4.3 - ¯ 4.7.
LZ30-5 A2 119-0.5 105±0.2 6.5 50
LZ30-6 A4 119-0.5 105±0.2 6.5 50
LZ33-1 A2 127-0.5 113.5±0.2 6.5 50
LZ33-2 A4 127-0.5 113.5±0.2 6.5 50
Subject to change
Part no. Mounting B C D E
LZ28-3 A3 60-0.5 50.0±0.2 3.0 24
LZ32-2 A1 80-0.5 71.5±0.2 7.0 34
LZ32-3 A3 80-0.5 71.5±0.2 7.0 34
LZ23-2 A1 92.5-0.5 82.5±0.2 6.5 46
LZ23-3 A3 92.5-0.5 82.5±0.2 6.5 46
Part no. Mounting B C D E
LZ28-3 Fan size 60 x 60 LZ32P Fan size 80 x 80
LZ28-3 Fan size 60 x 60
LZ32-2 / LZ32-3 Fan size 80 x 80
LZ23-2 / LZ23-3 Fan size 92 x 92
LZ30-5 / LZ30-6 Fan size 119 x 119
LZ33-1 / LZ33-2 Fan size 127 x 127
LZ30P Fan size 119 x 119
L
L
L
P
Finger guards
249
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
Finger guards
For compact centrifugal modules
– Material: PA plastic, fiberglass-reinforced
– Highlights: Flame protection class in line with UL 94V-0
RG 190 LZ46-1 133 9.0
RG 220 LZ47-1 166 8.7
RG 225 LZ48-1 158 8.7
Subject to change
Fan series Part no. a b
250
20
16
-0
1
Filter fan guards
– Material: Filter guard LZ40 N: black, fiberglass-reinforced plastic with
inserted wire mesh LZ60.
Coarse filter LZ60: stainless steel wire mesh
Mounting lug LZ40-1 for mounting
LZ40N Filter guard LZ40-1 Mounting lug LZ60 Coarse filter
4400 F
4400 FN
4300
4400
4100 N
DC fan series
AC 4300
9900
4000 N
4000 Z
Subject to change
AC fan series
6 6 6 1 5 R
8 8 8 1 7 R
9 1 1 1 8 R
1 1 1 1 1 R
ø 2 1 1 1 R
F
251
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
– Material: Guard cover: Injection-molded polycarbonate (PC) with mat surface.
Mounting plate: wire mesh with black powder coating
Filter pad: white, synthetically bonded fibers
– Note:
Filter fan guards suitable for fitting on axial fan series in sizes:
60 mm, 80 mm, 92 mm, 119 mm, ø 172 mm. All filter units fit directly on the existing
mounting holes of the fans.
Filter fan guards consisting of 3 parts: external guard cover, internal mounting plate, and
replaceable filter pad.
The filter pad can be replaced quickly and easily via a quick release on the guard cover.
The filter pads can be replaced even while the fan is running, as protection is provided
by the welded wire mesh.
A C
B
D
D
FF92 / FF 119
Filter performance
The filter fan guard filters 75% of dust particles
with a size of 5-10 microns and can withstand
temperatures of up to 100 °C. Filter class G3
according to DIN EN 779. Flame-retardant
according to DIN 53438, class F1. When a clean
filter is installed, a reduction of air flow of
20-30% is possible.
A C
B
D
D
FF60 / FF80
Fan size: 60 x 60 mm
80 x 80 mm
* Replacement filter available only in packages of 5.
Fan size: 92 x 92 mm
119 x 119 mm
A C
B
D
FF 172
Fan size: Ø 172 mm
FF60 60 x 60 mm 65 65 13.5 50.0 RF 60
FF80 80 x 80 mm 85 85 14.0 71.5 RF 80
FF92 92 x 92 mm 125 105 17.5 82.5 RF 92
FF119 119 x 119 mm 162 136 18.5 104.5 RF 119
FF172 ø 172 mm 226 190 19.5 162.0 RF 172
Subject to change
Part no. Fan size A B C D Part no. Replacement filter*
Filter fan guards
Fan Part no. k m o q r1 s t u Vers.
RET 97 (S) LZ 1000-097 116,0 80,0 10,0 0,80 10,0 108,0 3x4,5 – 1
RER 120 (K) LZ 1000-120 146,0 94,4 18,0 0,80 16,0 134,0 4x4,5 126,0 1
RER 133 (K) LZ 1000-133 129,0 87,0 13,0 1,00 8,0 118,0 4x4,5 103,0 1
RER 160 (S) LZ 1000-160 142,0 100,0 9,0 1,00 8,0 132,0 4x4,5 – 1
RER 175 / 190 (K) LZ 1000-175 170,0 125,5 14,0 1,25 10,0 158,0 4x4,5 146,0 1
RER 220 (K) LZ 1000-220 252,0 155,0 21,0 0,80 22,0 – – 199,0 2
RER 225 (K) LZ 1000-225 223,0 146,0 28,0 1,50 25,0 210,0 4x4,5 196,0 1
252
20
16
-0
1
Inlet rings
For centrifugal fans
– Material: Galvanized sheet steel
(P) = plastic, (S) = galvanized sheet steel
q 0
Ø
u Ø
k Ø
m r1 t 5,56 x 60°
45°
4
x 9
0
118
4,3
24
5
Ø
s 2
4
2
Vers. 2Vers. 1
253
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
Inlet rings for backward curved centrifugal fans
Part no. Fan size(1) k m n o q r1 r2 r3 s t u
96120-2-4013 120 (P)
Vers.
1 146.0 94.4 — 18.0 0.80 16.0 — — 134.0 4x4.5 126.0
Vers. 1
– Material: Galvanized sheet steel
Inlet rings for forward curved centrifugal fans
Part no. Fan size a b c d e f r u
09588-2-4013 160
09576-2-4013 140 / 146
09572-2-4013 133
09569-2-4013 120
09566-2-4013 108
09563-2-4013 097 (1)
09560-2-4013 085 (1)
Vers.
1
1
1
1
1
1
1 (2)
92.0 63.4 84.0 6.0 3x4.2 0.80 6.8 —
116.0 80.0 108.0 10.0 3x4.5 0.80 10.0 —
129.0 87.0 118.0 13.0 4x4.5 1.00 8.0 —
142.0 100.0 132.0 9.0 4x4.5 1.00 8.0 —
150.0 112.0 142.0 12.0 4x4.5 1.00 10.0 —
170.0 125.5 158.0 14.0 4x4.5 1.25 10.0 —
185.0 130.0 175.0 17.0 4x4.5 0.75 12.0 —
(1) 3 drilled holes staggered by 120° (2) only for 09588-2-4013Subject to change
Vers. 1
– Material: Galvanized sheet steel
(1) Fan size with key for impeller material: (P) = plastic, (S) = sheet steel, (A) = aluminumSubject to change
Inlet rings
For centrifugal fans
254
20
16
-0
1
– Material: Steel wire or sheet steel,
plastic coated in RAL no. 9005, black
– Filter: Viledon filter type R: PSB / 29 OS
(according to DIN 24185)
Separation capacity: < 86%
Efficiency: < 20%
Dust binding capacity: 650 g/m2
Air filters for centrifugal blowers (with die-cast aluminum housing)
Part no. Fan size
95777-1-5171 108 / 120
Replacement filter
95779-1-5171
a b c d e
142.0 66.0 83.0 118-132 145.0
95778-1-5171 140 / 146 / 160 95780-1-5171185.0 74.0 91.0 158-175 185.0
Subject to change
Fan size
190
220
225
250
280
310
Dimensions
See corresponding product page
See corresponding product page
See corresponding product page
See corresponding product page
See corresponding product page
See corresponding product page
Material: Galvanized sheet steel
Inlet rings without measuring device for backward curved centrifugal fans
Part no.
09576-2-4013
09609-2-4013
96358-2-4013
96359-2-4013
28000-2-4013
31000-2-4013
Vers.
1
2
1
1
1
1
Vers. 1 Vers. 2
Subject to change
6 0 G C 2 A
2 0 G A 2 A
3 0 W B 2 D
6 0 W B 2 D
2 0 G A 2 D
8 0 G B 2 A
4 0 G A 2 A
1 0 G C 2 A
1 0 G B 2 A
6 0 G C 2 A
6 0 G B 2 A
L W P W F A
Inlet rings / air filter
For centrifugal fans
255
20
16
-0
1
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s Cables
– Cable with molded plug connection in varying lengths.
– Wire end with wire end ferrules, crimped ferrules, or tin-plated.
– Straight or angled plug.
– For all fan types with flat plug 2.8 / 3.0 x 0.5.
LZ120 610 0.5 mm2 G C 2.8 x 0.5 AC
LZ120-4 2 000 0.5 mm2 G A 2.8 x 0.5 AC
LZ120-5 380 0.5 mm2 W B 2.8 x 0.5 DC
LZ120-6 610 0.5 mm2 W B 2.8 x 0.5 DC
LZ120-11 2 000 0.5 mm2 G A 2.8 x 0.5 DC
LZ120-16 800 0.5 mm2 G B 2.8 x 0.5 AC
LZ120-18 4 000 0.5 mm2 G A 2.8 x 0.5 AC
LZ126 1 000 0.5 mm2 G C 2.8 x 0.5 AC
LZ127 1 600 0.5 mm2 G B 2.8 x 0.5 AC
LZ130-1 610 0.82 mm2 G C 2.8 x 0.5 AC *
LZ140 610 0.73 mm2 G B 2.8 x 0.8 AC
Part no. L1 (mm) Wires Plug Wire end Flat push-on receptacle Application
Cable Straight plug (G)
Cable Angled plug (W)
1
2
7
,51
5
1
6
,5
11
22,5
31 L1
10
8
,51
6
0
,1

0
,5
4
7,5
20 L1+0,5
2
8
,5
0
,2
0
,1
4
3
,5

0
,2
5
68
5,5
8
–0,25
6
Ø
1
,5
Wire end ferrules Wire end A
10
+5
–2
Tin-plated Wire end B
6
Ø
1
,5
Wire end ferrules Wire end C
* UL-approved
256
20
16
-0
1
– Design: Cable conforms to UL standards
sealed plug. Customized cables
on request.
Cables for energy-saving motors 115/230 VAC
Part no.
13060-4-1040
Subject to change
a 450
13061-4-1040 1500
Jacketed cable, internal cables
(UL style 2464/1061)
3 x AWG20 (approx. 0.5 mm2)
Wire end splices
Cable (ESM) / Handheld Programmer
L
L
L
L
L
L
P
– Easy speed programming
– Battery operated
– User-friendly navigation menu
– Protective cover with folding stand
For Energy Saving Motor (ESM) based products
Part no.
CBC 000-AF08-01
Subject to change
Makes quick work of programming the two ESM adjustable operating speeds. Eliminates the need for a PC, software adapter and second cable.
Especially for use in production or by sales representatives. Automatic shut-off function for extended battery life.
Mini USB plug for downloading software updates. Batteries, programming cable, and operating instructions included in scope of delivery.
LZ370
257
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
Accessories
In addition to the accessories and installation parts listed here, ebm-papst also supplies
a number of additional, sometimes very special parts for fans. Our company sales team is
happy to offer you their expert assistance with all your questions regarding the installation
and use of our fans.
LZ212 LZ260/LZ261 LZ210
Ø
6
,6
(2
x) Ø
4
Ø
1
1
12
(2x) 0,5x45°
5
0
0,5
6,9 ±0,1 11±0,3
LZ550
Screw clip of rustproof spring steel.
For mounting fans with threaded pin
3.5 DIN EN ISO 1478 (7970).
Screw clip of hardened steel.
For mounting fans with threaded pin 6-32 UNC
or 3.5 DIN 7970.
Temperature sensor for speed-controlled fan
operation. Temperature range 30...50 °C.
Rubber anti-vibration mounts
for fans with a hole ø of 4.3 ±0.2 mm and
flange thickness of 3 to 5.5 mm.
For a carrier plate with a hole ø of 6.5 ±0.15
mm and plate thickness of 1 to 2 mm.
Spacer of fiberglass-reinforced plastic.
For mounting with screws through both fan
mounting flanges.
8300 LZ212 / LZ260
8400 N LZ261
3400 N LZ261
9000 LZ210
4000 LZ210
4300 LZ212 / LZ260
Fan series Part no.
5100 LZ210
5600 LZ210
5200 LZ210
5900 LZ210
7000 LZ210
VARIOFAN LZ370
Fan series Part no.
258
20
16
-0
1
Connection diagrams EC
E)
+
0-
10
V
PW
M
Ta ch GN
D
Wire Connection Color Assignment/function Wire Connection Color Assignment/function
1 1+ Red Supply voltage ripple ±3.5% Tach White
0-10 V / PWM Yellow Control inputGND Blue GND
Wire 1
Red YellowWhiteBlue
Tach output:
Temperature
control module
50002-1-0174
50003-1-0174
Adjustable speed
PWM 1 - 50 kHz
Adjustable
speed with
potentiometer
Full speed
100% PWM -> n=max
app. 10% PWM -> n=min
< 10% PWM -> n=0
Safe startup at
UNom - 30% as of 40% PWM
Adjustable speed
1 V - 10 V
10 V -> n=max
app. 1 V -> n=min
< 1 V -> n=0
Safe startup at
UNom - 30% as of 4V Ucontr.
33 K 4.7 K
10 K
PWM
12 V
U
Speed display
Alarm
Controller
Counter
Red
White
Blue
Supply voltage ripple
±3.5%
Tach output
pulses per revolution
GND
Isink max. 10 mA
680 V
47 V
Customer circuit
Application instructions for various control options
Connection Fan
Yellow
Lin/PWM control input
0-10 VDC / PWM
Technical features (nominal voltage 24 / 48 VDC):
• Control input 0-10 VDC / PWM
• Tach output
• Reverse polarity and locked-rotor protection
• Motor current limitation
• Voltage-dependent derating
• Thermal overload protection electronics
• Soft startup
RE > 100 K
259
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s 20
16
-0
1
+
0-
10
V
PW
M
Ta ch GN
D
Wire Connection Color Assignment/function Wire Connection Color Assignment/function
1 1+ Red Supply voltage ripple ±3.5% Tach White
0-10 V / PWM Yellow Control input (impedance 100 kV)
GND Blue GND
Wire 1
Red YellowWhiteBlue
Tach output:
2 pulses/revolution (M1G045/M1G055)
3 pulses/revolution (M1G074/M1G084)
Temperature
control module
50002-1-0174
50003-1-0174
Adjustable speed
PWM 1 - 10 kHz
Adjustable
speed with
potentiometer
Full speed
100% PWM -> n=max
app. 10% PWM -> n=min
< 10% PWM -> n=0
Startup at > 14%
Adjustable speed
1 V - 10 V
10 V -> n=max
app. 1 V -> n=min
< 1 V -> n=0
Startup at > 1.4 V
33 K 4.7 K
10 K
PWM
12 V 12 V
U
Speed display
Alarm
Controller
Counter
Red
White
Blue
Supply voltage ripple
±3.5%
Tach output
pulses per revolution
GND
Isink max. 10 mA
680 V
47 V
Customer circuit
Application instructions for various control options
Connection Fan
Yellow
Lin/PWM control input
0-10 VDC / PWM
Connection diagrams EC
G)
Technical features (nominal voltage 24 / 48 VDC):
• Control input 0-10 VDC / PWM
• Tach output
• Reverse polarity and locked-rotor protection
20
16
-0
1 260
Connection diagrams EC
H3)
Wire Connection Color Function / assignment
CON10 L Black Power supply 230 VAC, 50 - 60 Hz, see type plate for voltage range
CON11 N Blue Neutral conductor
CON10
Customer circuit Connection Fan
CON70
CON11
CON70
CON10
CON11
CON70
CON12
L
N
SL
PE
PE1
AC1
AC2
P
N
CON12 PE Green/yellow Ground conductor
CON70 SL brown Speed selection: switch open = speed 1; switch closed = speed 2
Technical features (M3G 055 with 2 speed stages):
• Speed setting input (230V)
• Thermal overload protection electronics / motor
• Motor current limitation
• Locked-rotor protection
• Soft startup
261
20
16
-0
1
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s Connection diagrams EC
H4)
Imax = 1.1 mA
1mF
Connection Color Function / assignment
L Black Power supply 115/230 VAC, 50 - 60 Hz, see type plate for voltage range
N Blue Neutral conductor
Customer circuit Connection Fan
PE Green/yellow Ground conductor
+10V/max.1.1mA Red Voltage output +10 V / 1.1 mA, electrically isolated, not short-circuit-proof
Tach White Tach output: Open collector, 1 pulse per revolution, electrically isolated
0-10V / PWM Yellow Control input 0-10 V or PWM, electrically isolated
GND Blue GND - Connection for control interface
680R
ZMM47
13
24
47k 47k
PE1
AC1 P
AC2 N
L
N
PE
+10V
0-10V / PWM
GND
Tach
Max.
speed
Adjustable
speed
10V -> n = max
1V -> n = min
<1V -> n = 0
1-10V
Adjustable
speed with
PWM 1-10kHz
Adjustable
speed with
potentiometer
10K
15V
12V
Imax = 10mA
100% PWM -> n = max
10% PWM -> n = min
<10% PWM -> n = 0
Technical features (M3G 055 speed-controlled):
• Output 10 VDC Max. 1.1 mA
• Tach output
• Thermal overload protection electronics / motor
• Motor current limitation
• Soft startup
• Locked-rotor protection
• Control input 0-10 VDC / PWM
• Control interface with SELV potential safely disconnected from the mains
3.15AT
L
N
PE
+10V
0-10V / PWM
GND
Tach
+10V
0-10V / PWM
0-10V / PWM
GND
GNDGND
0-10V / PWM0-10V / PWM
+10V
31
42
262
20
16
-0
1
Connection diagrams EC
J5)
Wire Connection Color Assignment/function
1 UN +24/48 VDC Red
2 0-10 VDC Yellow
4 GND Blue Reference ground
Customer circuit
Application instructions for various control options
Connection Fan
Technical features (nominal voltage 24 / 48 VDC):
• Control input 0-10 VDC / PWM
• Tach output
• Reverse polarity and locked-rotor protection
• Motor current limitation
• Line undervoltage detection
• Soft startup
3 Tach White Tach output, 3 pulses per revolution, Isink max. = 10 mA
Control input Re >100 K
Power supply 24/48 VDC, supply voltage ripple ± 3.5 %
max.
speed
PWM 1-10kHz
as of 40% PWM
Unom -30%
safe start-up at
<10% PWM -> n = 0
10% PWM -> n = min
100% PWM -> n = max
Speed setting with Setting of values via
temperature controller
as of 4V Ucontr.
<1V -> n = 0
1V -> n = min
10V -> n = max
T>45°C -> n = max
T<10°C -> n = 0
Speed setting with
potentiometer
Unom -30%
safe start-up at
Speed setting
12V
39V
UB
1-10V
Reverse
-polarity
protection
RE>100K
33K
4.7K
10K
680R
T
50003-1-0174
P
OUT
N
GND1
DUE
GND
DUE
0-10VDC
UN
+24/48VDC
44
4
4
4
3
22
2
2
2
2
11
1
11
263
20
16
-0
1
In fo rm at io n DC
a xi al fa ns DC
fa ns -
s pe ci al s AC
m ax x / E
C
fa ns AC
a xi al fa ns Ac ce ss or ie s Re pr es en ta tiv
es DC
c en tr ifu
ga l f
an s AC
c en tr ifu
ga l f
an s Connection diagrams AC
A1) / A3) / C2)
A1) Single-phase capacitor motor (1~ 115/230 VAC power line)
with thermal overload protector wired internally
U1 = blue
U2 = black
Z = brown
= green/yellow
C2) Star connection (3~ 400 VAC power line)
without thermal overload protector
U1 = black
U2 = green
V1 = blue
V2 = white
W1 = brown
W2 = yellow
= green/yellow
A3) Single-phase capacitor motor (1~ 115/230 VAC power line)
with thermal overload protector wired internally
LNPE
C
L = blue
N = black
= green/yellow
264
20
16
-0
1
Connection diagrams AC
J7)
L1
S
Black
Speed selection
Energy-saving
motor / fan
(ESM)
Blue
Brown
Line voltage
Open (L1 or N)
n1 n2
N
S
Closed
Speed selection
L1 or N
J7) Energy-saving motor (ESM) (1~ 115/230 VAC power line)

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10