Digital Blood Pressure Monitor Model UA-787 Instruction Manual ...

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

pressure, device, blood, cuff, button, your, batteries, with, START, Press, measurement, English, measurement., Pressure, that, during, Blood, Measurement, data, CLOCK, when, will, using, adapter, MEMORY, mmHg, mark, this, cause, button.

Transcript

Digital Blood Pressure Monitor
Model UA-787
Instruction Manual
Original
Manuel d’instructions
Traduction
Manual de Instrucciones
Traducción
Manuale di Istruzioni
Traduzione
Bedienungsanleitung
Übersetzung
使用手冊
1WMPD4001187E
翻譯
English 1
Contents
Dear Customers......................................................................................... 1
Preliminary Remarks .................................................................................. 2
Precautions ................................................................................................ 2
Parts Identification ..................................................................................... 3
Symbols ..................................................................................................... 4
Operation Mode......................................................................................... 5
Using The Monitor ..................................................................................... 6
Installing / Changing The Batteries ........................................................ 6
Connecting The Air Hose........................................................................ 6
Connecting The AC adapter ................................................................... 6
Adjusting The Built-in Clock .................................................................. 7
Setting Three Reminders ........................................................................ 7
Alarm ON/OFF Mark On The Display...................................................... 8
Selecting The Correct Cuff...................................................................... 8
Applying The Arm Cuff........................................................................... 8
How To Take Proper Measurements....................................................... 9
Measurement.......................................................................................... 9
After Measurement................................................................................. 9
Measurements ......................................................................................... 10
Normal Measurement........................................................................... 10
Measurement With The Desired Systolic Pressure................................ 11
Notes For Proper Measurement............................................................ 11
Recalling Memory Data ............................................................................ 12
What Is An Irregular Heartbeat................................................................. 13
Pressure Bar Indicator .............................................................................. 13
WHO Classification Indicator.................................................................... 13
About Blood Pressure .............................................................................. 14
What Is Blood Pressure?........................................................................ 14
What Is Hypertension And How Is It Controlled? .................................. 14
Why Measure Blood Pressure At Home? ............................................... 14
WHO Blood Pressure Classification....................................................... 14
Blood Pressure Variations..................................................................... 14
Troubleshooting ...................................................................................... 15
Maintenance............................................................................................. 16
Technical Data ......................................................................................... 16
Dear Customers
Congratulations on purchasing a state-of-the-art A&D blood pressure monitor,
one of the most advanced monitors available today. Designed for ease of use
and accuracy, this device will facilitate your daily blood pressure regimen.
We recommend that you read through this manual carefully before using
the device for the first time.
English 2
Preliminary Remarks
This device conforms to the European Directive 93/42 EEC for Medical Products.
This is made evident by the mark of conformity.
(0123: The reference number to the involved notified body)
The device is designed for use on adults only, not newborns or infants.
Environment for use. The device is for use in the home healthcare environment.
This device is designed to measure blood pressure and pulse rate of people for
diagnosis.
Precautions
Precision components are used in the construction of this device. Extremes in
temperature, humidity, direct sunlight, shock or dust should be avoided.
Clean the device and cuff with a dry, soft cloth or a cloth dampened with water
and a neutral detergent. Never use alcohol, benzene, thinner or other harsh
chemicals to clean the device or cuff.
Avoid tightly folding the cuff or storing the hose tightly twisted for long periods, as
such treatment may shorten the life of the components.
The device and cuff are not water resistant. Prevent rain, sweat and water from
soiling the device and cuff.
Measurements may be distorted if the device is used close to televisions,
microwave ovens, cellular telephones, X-ray or other devices with strong
electrical fields.
When reusing the device, confirm that the device is clean.
Used equipment, parts and batteries are not treated as ordinary household waste,
and must be disposed of according to the applicable local regulations.
When the AC adapter is used, make sure that the AC adapter can be readily
removed from the electrical outlet when necessary.
Do not modify the device. It may cause accidents or damage to the device.
To measure blood pressure, the arm must be squeezed by the cuff hard enough
to temporarily stop blood flow through the artery. This may cause pain, numbness
or a temporary red mark to the arm. This condition will appear especially when
measurement is repeated successively. Any pain, numbness, or red marks will
disappear with time.
Contraindications
The following are precautions for proper use of the device.
Do not apply the cuff on an arm with another medical electrical equipment
attached. The equipment may not function properly.
People who have a severe circulatory deficit in the arm must consult a doctor
before using the device, to avoid medical problems.
Do not self-diagnose the measurement results and start treatment by yourself.
Always consult your doctor for evaluation of the results and treatment.
Do not apply the cuff on an arm with an unhealed wound.
English 3
Do not apply the cuff on an arm receiving an intravenous drip or blood transfusion.
It may cause injury or accidents.
Do not use the device where flammable gases such as anesthetic gases are
present. It may cause an explosion.
Do not use the device in highly concentrated oxygen environments, such as a
high-pressure oxygen chamber or an oxygen tent. It may cause a fire or explosion.
Parts Identification
Part of Display
Battery Cover
1.5V Batteries
(R6P, LR6 or AA) Battery Compartment
Display
CLOCK Button
Air Hose
Arm Cuff
DC Jack
START Button
(Orange illumination)
Air Connector Plug
Air Socket
MEMORY Button
I.H.B. Indicator (Irregular heartbeat indicator)
Pressure Bar Indicator
and
WHO Classification Indicator
MEMORY Systolic Pressure
Diastolic Pressure
Pulse Rate
Battery Indicator
Heart Mark
English 4
Symbols
Symbols Function / Meaning Recommended Action
Standby and Turn the device on.
SYS Systolic blood pressure in mmHg
DIA Diastolic blood pressure in mmHg
PUL./min Pulse per minute
Battery installation guide
Direct current
Type BF: Device, cuff and tubing are
designed to provide special protection against
electrical shocks.
The indicator while measurement is in
progress. It blinks while detecting the pulse.
Measurement is in progress.
Remain as still as possible.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that detects irregular heartbeats
or any excessive body movement during the
measurement.
Previous measurements stored in MEMORY.
Full Battery The battery power indicator during measurement.
Low Battery The battery is low when it blinks.
Replace all batteries with
new ones, when the
indicator blinks.
Unstable blood pressure due to movement
during the measurement.
Try measurement again.
Remain very still during the
measurement.
The systolic and diastolic values are within 10
mmHg of each other.
The pressure value did not increase during
inflation.
The cuff is not fastened correctly.
PUL. DISPLAY ERROR The pulse is not detected correctly.
Fasten the cuff correctly,
and try the measurement
again.
CLOCK button mark
Alarm ON/OFF mark of the reminder
If you want to stop the sound,
press the START button.
EC directive medical device label
EU-representative
Manufacturer
Date of manufacture
Class II device
English 5
Symbols Function / Meaning Recommended Action
WEEE label
Refer to instruction manual/booklet
SN Serial number
Polarity of DC jack
Operation Mode
1. Normal Measurement With Storing Data (Refer to page 10)
Press the START button. Blood pressure is measured and data is stored within
the device. The device can store the last sixty sets of data in memory
automatically.
2. Recalling Data (Refer to page 12)
Press the MEMORY button to recall the data.
The date and the most recent data are displayed.
The device can store the last sixty sets of data
in memory automatically.
3. Clearing Data (Refer to page 12)
Press and hold the MEMORY button until the “ ”
(memory) mark blinks to clear the stored data.
4. Measurement With The Desired Systolic Pressure
Refer to page 11 for the measurement with the desired systolic pressure.
Date
Data
Press the MEMORY button
Month
Day
Time
English 6
Using The Monitor
Installing / Changing The Batteries
1. Slide the battery cover up to open it.
2. Remove the used batteries and insert new
batteries into the battery compartment as
shown, taking care that the polarities (+)
and (-) are correct.
3. Slide the battery cover down to close it.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will
not work.
When (LOW BATTERY mark) blinks on the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are for
testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Stored data are cleared when the batteries are removed.
Connecting The Air Hose
Insert the air connector plug into the air
socket firmly.
Connecting The AC adapter
Insert the AC adapter plug into the DC
jack. Next, connect the AC adapter to an
electrical outlet.
Use the specified AC adapter.
(Refer to page 17)
Step 3
Step 1
Step 2
Air connector plug
Air socket
DC jack
AC adapter plug
English 7
Using The Monitor
Adjusting The Built-in Clock
The device has a built-in clock. We recommend that you adjust the clock prior to use.
1. Press and hold the CLOCK button until the digits start blinking.
2. Select the year using the START button.
Press the CLOCK button to set the current year and
move to month/day selection. The date can be set
anywhere between the years 2004 and 2053.
3. Select the month using the START button.
Press the CLOCK button to set the current month
and move to day selection.
4. Select the day using the START button.
Press the CLOCK button to set the current day and
move to hour/minute selection.
5. Select the hour using the START button.
Press the CLOCK button to set the current hour and
move to minute selection.
6. Select the minute using the START button.
Press the CLOCK button to set the current minute
and activate the clock.
Setting Three Reminders
This device has 3 reminder alarms. You can set
3 different reminder alarms within a 24-hour period.
1. Press and hold the CLOCK button until the digits
start blinking. Then press the MEMORY button. “P-1”
is shown at the middle line of the display.
2. Select the hour using the START button and press the
CLOCK button to set the hour and move to minute
selection. Press the MEMORY button to complete the
reminder setting after selecting the minute.
3. Then the display shows “P-2” for the second reminder.
Repeat the above process if you need a second
reminder.
4. A third reminder can be set as well.
Month / day
Hour / Minute
Clock
CLOCK button
Year
CLOCK button
First
buzzer
Third
buzzer
MEMORY
button
Second
buzzer
English 8
Using The Monitor
Alarm ON/OFF Mark On The Display
When the alarm is on, a “p” appears on the LCD. To turn the alarm off, simply
press the CLOCK button once.
The alarm will sound for 1 minute. To stop the alarm sound, press the START
button once.
Selecting The Correct Cuff
Using the correct cuff size is important for an accurate reading. If the cuff is not the
proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size Recommended Cuff Size Catalog Number
22 cm to 43 cm Large adult cuff CUF-U-LA
17 cm to 32 cm Adult cuff CUF-U-A
Arm size: The circumference at the biceps.
Note: Model UA-787 is not designed for using a small adult cuff.
Symbols printed on the cuff.
Symbols Function / Meaning Recommended Action
Artery position mark Set the mark on the artery of the upper arm or in line with the ring finger on the inside of the arm.
REF Catalog number
Lot number
Applying The Arm Cuff
1. Wrap the cuff around the upper arm,
about 1 to 2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the skin, as
clothing may cause a faint pulse and
result in a measurement error.
2. Constriction of the upper arm, caused by
rolling up a shirtsleeve, may prevent
accurate readings.
Do not roll up shirtsleeve tightly
1 to 2 cm
Air hose
Cuff
Artery position mark
Secure the fabric
fastener firmly
English 9
Using The Monitor
How To Take Proper Measurements
For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs.
Keep your feet on the floor and straighten your back.
Relax for about five to ten minutes before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure immdiately after physical exercise or a bath. Rest for twenty or
thirty minutes before taking the measurement.
Try to measure your blood pressure at the same time every day.
Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be alarmed).
After Measurement
After measurement, press the START button to turn off the power. Remove the
cuff and record your data.
Note: The device has an automatic power shut-off function, which turns the
power off automatically one minute after measurement.
Allow at least three minutes between measurements on the same person.
English 10
Measurements
Model UA-787 is designed to detect the pulse and to inflate the cuff to a
systolic pressure level automatically.
If your systolic pressure is expected to exceed 230 mmHg or you use the
optional small cuff, read "Measurement With The Desired Systolic Pressure" on
the next page.
Normal Measurement
1. Place the cuff on the arm (preferably the left arm).
Sit quietly during measurement.
2. Press the START button.
The average blood pressures and last data
number are displayed briefly. Then the display
changes, as indicated in the figure at the right,
as the measurement begins. The cuff starts to
inflate. It is normal for the cuff to feel very tight.
A pressure bar indicator is displayed, as in the
figure at the right, during inflation.
Note: If you wish to stop inflation at any time,
press the START button again.
3. When inflation is complete, deflation starts
automatically and (heart mark) blinks,
indicating that the measurement is in progress.
Once the pulse is detected, the mark blinks
with each pulse beat.
Note: If an appropriate pressure is not
obtained, the device starts to
inflate again automatically.
4. When the measurement is complete, the
systolic and diastolic pressure readings
and pulse rate are displayed. The cuff
exhausts the remaining air and deflates
completely.
5. Press the START button again to turn off the power.
Note: Model UA-787 is provided with an automatic power shut-off function.
Allow at least three minutes between measurements on the same person.
START
At heart level
Starts inflation
Pressurizing
Measurement
in progress
Systolic pressure
Diastolic pressure
WHO classification
Pulse rate
Exhausts remaining
air automatically
START button
Averaged data
Data number
English 11
Measurements
Measurement With The Desired Systolic Pressure
If your systolic pressure is expected to exceed
230 mmHg or you use this procedure.
1. Place the cuff on the arm (preferably the left arm).
2. Press and hold the START button
until a number about 30 to 40 mmHg
higher than your expected systolic
pressure appears.
3. Release the START button to start
measurement, when the desired
number is reached. Then continue to
measure your blood pressure as
described on the previous page.
Notes For Proper Measurement
Sit down in a comfortable position. Place the arm to be used for the
measurement on a table or other support so that the center of the cuff will be at
the same height as your heart.
Relax for about five or ten minutes before taking a measurement. If you are
excited or depressed by emotional stress, the measurement will reflect this stress
as a higher (or lower) than normal blood pressure reading and the pulse reading
will usually be faster than normal.
An individual's blood pressure varies constantly, depending on what you are
doing and what you have eaten. What you drink can have a very strong and
rapid effect on your blood pressure.
This device bases its measurements on the heartbeat. If you have a very weak or
irregular heartbeat, the device may have difficulty determining your blood
pressure.
Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. Refer to page 4 for the description of
symbols.
This device is intended for use by adults only. Consult with your physician before
using this device on a child. A child should not use this device unattended.
Refer to the previous page for
measurement
Press and hold the button
At heart level
Release the button at
the desired systolic
pressure
English 12
Recalling Memory Data
Note: This device stores the last sixty measurements in memory automatically. The
data is retained as long as the batteries are in the device. When you remove
the batteries or the batteries are drained, the data will be erased.
1. Press the MEMORY button.
2. The date and the most recent data are
displayed.
3. When the MEMORY button is pressed
while data is displayed, the previous
data is displayed.
4. After the last data is displayed, the
display goes blank.
5. Press and hold the MEMORY button until the “ ” (memory)
mark blinks to clear the stored data.
Note: Pressing the START button while the memory data is displayed initiates
the UA-787 to start taking a measurement.
Date
Data
Press the MEMORY button
English 13
What Is An Irregular Heartbeat
Model UA-787 provides a blood pressure and pulse rate measurement
even when an irregular heartbeat occurs. An irregular heartbeat is defined as a
heartbeat that varies by 25% from the average of all heartbeats during the blood
pressure measurement. It is important that you be relaxed, remain still and do
not talk during measurements.
Note: We recommend contacting your physician if you see this indicator
frequently.
Pressure Bar Indicator
The indicator monitors the progress of pressure during measurement.
WHO Classification Indicator
Each segment of the bar indicator corresponds to
the WHO blood pressure classification described on
the next page.
Inflation complete
Pressurizing
Inflation in progress Measurement in progress
Releasing air
WHO Classification Indicator
Severe hypertension
Moderate hypertension
Mild hypertension
High normal
Normal
Optimal
The indicator displays a segment, based on
the current data, corresponding to the WHO
classification.
:
Example:
Moderate hypertension
Mild hypertension
High normal
English 14
About Blood Pressure
What Is Blood Pressure?
Blood pressure is the force exerted by blood against the walls of the arteries.
Systolic pressure occurs when the heart contracts. Diastolic pressure occurs
when the heart expands. Blood pressure is measured in millimeters of mercury
(mmHg). One's natural blood pressure is represented by the fundamental
pressure, which is measured first thing in the morning while one is still at rest and
before eating.
What Is Hypertension And How Is It Controlled?
Hypertension, an abnormally high arterial blood pressure, if left unattended, can
cause many health problems including stroke and heart attack. Hypertension can
be controlled by altering lifestyle, avoiding stress, and with medication under a
doctor’s supervision.
To prevent hypertension or keep it under control:
Do not smoke Exercise regularly
Reduce salt and fat intake Have regular physical checkups
Maintain proper weight
Why Measure Blood Pressure At Home?
Blood pressure measured at a clinic or doctor's office may cause apprehension
and can produce an elevated reading, 25 to 30 mmHg higher than that
measured at home. Home measurement reduces the effects of outside
influences on blood pressure readings, supplements the doctor's readings and
provides a more accurate, complete blood pressure history.
WHO Blood Pressure
Classification
Standards to assess high blood
pressure, without regard to age,
have been established by the
World Health Organization
(WHO), as shown in the chart.
Blood Pressure Variations
An individual’s blood pressure
varies greatly on a daily and
seasonal basis. It may vary by 30 to 50 mmHg
due to various conditions during the day. In
hypertensive individuals, variations are even
more pronounced. Normally, the blood
pressure rises while at work or play and falls to
its lowest levels during sleep. So, do not be
overly concerned by the results of one
measurement.
English 15
Take measurements at the same time every day using the procedure described
in this manual to get to know your normal blood pressure. Regular readings give
a more comprehensive blood pressure history. Be sure to note date and time
when recording your blood pressure. Consult your doctor to interpret your blood
pressure data.
Troubleshooting
Problem Possible Reason Recommended Action
Batteries are drained. Replace all batteries with new ones.
Nothing
appears on the
display, even
when the
power is turned
on.
Battery terminals are not in
the correct position.
Reinstall the batteries with negative
and positive terminals matching
those indicated on the battery
compartment.
The cuff does
not inflate.
Battery voltage is too low.
(LOW BATTERY mark)
blinks. [ If the batteries are
drained completely, the mark
does not appear.]
Replace all batteries with new
ones.
The cuff is not fastened
properly. Fasten the cuff correctly.
You moved your arm or body
during the measurement.
Make sure you remain very still and
quiet during the measurement.
The cuff position is not
correct.
Sit comfortably and still.
Raise your hand so that the cuff is
at the same level as your heart.
The unit does
not measure.
Readings are
too high or too
low.
If you have a very weak or irregular
heat beat, the device may have
difficulty in determining your blood
pressure.
The value is different from
that measured at a clinic or
doctor’s office.
Refer to “Why measure blood
pressure at home”.
Other
Remove the batteries. Place them
back properly and try the
measurement again.
Note: If the actions described above do not solve the problem, contact the dealer. Do
not attempt to open or repair this product, as any attempt to do so will make your
warranty invalid.
English 16
Maintenance
Do not open the device. It uses delicate electrical components and an intricate air
unit that could be damaged. If you cannot fix the problem using the
troubleshooting instructions, request service from your dealer or from the A&D
service group. The A&D service group will provide technical information, spare
parts and units to authorized dealers.
The device was designed and manufactured for a long service life. However it is
generally recommended to have the device inspected every 2 years, to ensure
proper functioning and accuracy. Please contact either your authorized dealer or
A&D for maintenance.
Technical Data
Type UA-787
Measurement method Oscillometric measurement
Measurement range Pressure: 20 - 280 mmHg
Pulse: 40 - 200 beats / minute
Measurement accuracy Pressure: ±3 mmHg
Pulse: ±5%
Power supply 4 x 1.5V batteries (R6P, LR6 or AA) or
AC adapter (TB-233) (Not included)
Number of measurements Approximately 450 measurements, when AA Alkaline
batteries are used, with pressure value of 180 mmHg
at room temperature of 23 °C.
Classification Internally powered ME equipment (Supplied by
batteries) /
Class II (Supplied by adapter)
Continuous operation mode
Clinical test According to ANSI / AAMI SP-10 1987
EMC IEC 60601-1-2: 2007
Memory Last 60 measurements
Operating conditions +10 °C to +40 °C / 15 %RH to 85 %RH /
800 hPa to 1060 hPa
Transport / Storage conditions -10 °C to +60 °C / 15 %RH to 85 %RH
Dimensions Approx. 163 [W] x 62 [H] x 112 [D] mm
Weight Approx. 350 g, excluding the batteries
Applied part Cuff Type BF
English 17
Useful life Device: 5 years (when used six times a day)
Cuff: 2 years (when used six times a day)
Accessory AC adapter The adapter is to connect the device to a power
source at home.
TB-233 Please contact your local A&D dealer for purchasing.
The AC adapter is required to be inspected or
replaced periodically.
TB-233C Input: 100-240V
Output: 6V 500mA
TB-233BF Input: 240V
Output: 6V 500mA
Accessories sold separately
Arm size: The circumference at the biceps.
Note: Specifications are subject to change without prior notice.
EMC table information is listed on our website:
http://www.aandd.jp/products/manual/medical/emc_acadapter_en.pdf
Cuff Catalog Number Cuff Size Arm Size
CUF-U-LA Large adult cuff 22 cm to 43 cm
CUF-U-A Adult cuff 17 cm to 32 cm
AC adapter Catalog Number Plug (Outlet type)
TB-233C Type C
TB-233BF Type BF
139°C 2A
139°C 2A
Asahi 1-243, Kitamoto-shi, Saitama 364-8585, JAPAN
Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119
A&D INSTRUMENTS LIMITED
Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire
OX14 1DY United Kingdom
Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485
A&D ENGINEERING, INC.
1756 Automation Parkway, San Jose, California 95131, U.S.A.
Telephone: [1] (408) 263-5333 Fax: [1] (408)263-0119
A&D AUSTRALASIA PTY LTD
32 Dew Street, Thebarton, South Australia 5031, AUSTRALIA
Telephone: [61] (8) 8301-8100 Fax: [61] (8) 8352-7409

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10