ZCAT Series - TDK Product Center

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

1000, cable, ZCAT, (MHz), Frequency, CHARACTERISTICS, equipment, without, 20130723, e9a15_zcat.fm, 001-01, Type, subject, notice., specifications, change, 500MHz], Part, type, equipment,, core, with, case, when, wires, flat, 20±1, series, diameter, Applicable

Transcript

July 2013
Clamp Filters (Ferrite Core with Case)
For cable
ZCAT series
ZCAT
ZCAT-A
ZCAT-B
ZCAT-D/-DT
E M C C o m p o n e n t s
(2/13)
001-01 / 20130723 / e9a15_zcat.fm
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or
less).
The case may crack when it is handled below freezing point or when it experiences a fall or other mechanical shock, as it is made of
plastic; please exercise caution when handling the case.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
In a case where the product is attached to a cable larger than the product's internal diameter, the ferrite core may be damaged.
Please confirm compatibility with the cable before use.
Dropping or forcible engagement may cause damage to the product.
Please handle the product with care when engaging.
Do not detach and reuse a product that has been engaged; this may damage the engaged portion.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
Clamp Filters (Ferrite Core with Case)
For cable
FEATURES
Using TDK's unique structure where the ferrite core is mounted and integrated in a plastic case, it is possible to attach them to interface
cables and power cables with one touch without having to cut the cables.
Have excellent absorption of high-frequency noise using the high-frequency absorption characteristics of the ferrite core.
Effective for common mode noise, so can be implemented as a noise countermeasure without influencing signal quality.
Series are according to the outer diameter of the cable in order to be compatible with various cable sizes.
APPLICATION
PCs, word processors, monitors, HDDs, digital telephones, audio equipment, electronic musical instruments, video games, copiers, and
facsimiles
PART NUMBER CONSTRUCTION
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Operating temperature range includes self-temperature rise.
Overview of the ZCAT Series
ZCAT 24 36 - 13 30 A BK
Series
name
Outer
dimensions
Length
dimensions
Inner
dimensions
Core
material
code
Fixing type code
Outer color
code
(mm) (mm) (mm)
A
Fixed cable type
(Cable is clamped inside the main body)
BK Black
Non code Gray
B Chassis fixed type
D Flat cable type
DT
Flat cable type
(Double-sided tape fixed type)
Non code
Band fixed type
(Cable is secured to the main body by a nylon band)
Type
Temperature range
Package quantity Individual weightOperating
temperature
Storage condition after
engagement
Temperature range for
engagement work
(°C) (°C) (°C) (pieces/box) (g)
ZCAT3035 –40 to +85 –40 to +85 0 to +50 200 64.8
ZCAT2017-B –40 to +85 –40 to +85 0 to +50 350 11.5
ZCAT2235 –40 to +85 –40 to +85 0 to +50 400 26.0
ZCAT2436 –40 to +85 –40 to +85 0 to +50 400 29.0
ZCAT2032 –40 to +85 –40 to +85 0 to +50 420 22.7
ZCAT2035 –40 to +85 –40 to +85 0 to +50 480 21.2
ZCAT2132 –40 to +85 –40 to +85 0 to +50 480 21.6
ZCAT1730 –40 to +85 –40 to +85 0 to +50 840 11.6
ZCAT2017 –40 to +85 –40 to +85 0 to +50 640 11.0
ZCAT1325 –40 to +85 –40 to +85 0 to +50 1,344 6.37
ZCAT1518 –40 to +85 –40 to +85 0 to +50 896 6.1
ZCAT3618-D –40 to +85 –40 to +85 0 to +50 480 15.6
ZCAT4625-D –40 to +85 –40 to +85 0 to +50 240 32.5
ZCAT6819-D –40 to +85 –40 to +85 0 to +50 160 58.4
ZCAT10D –40 to +85 –40 to +85 0 to +50 770 5.6
ZCAT13D –40 to +85 –40 to +85 0 to +50 450 14.8
ZCAT20D –40 to +85 –40 to +85 0 to +50 280 46.3
Product compatible with RoHS directive
Halogen-free
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series
ZCAT Type
SHAPE & DIMENSIONS
Dimensions in mm
A fixing band is included when shipped.
INTERNAL CONSTRUCTION STRUCTURE OF THE FIXING BAND
Part No. A B C D E
Applicable cable
outer diameter
ZCAT1518-0730(-BK) 22±1 18±1 7±1 15±1 – 7max.
ZCAT2017-0930(-BK) 21±1 17±1 9±1 20±1 – 9max.
ZCAT2032-0930(-BK) 36±1 32±1 9±1 19.5±1 – 9max.
ZCAT2132-1130(-BK) 36±1 32±1 11±1 20.5±1 – 11max.
ZCAT3035-1330(-BK) 39±1 34±1 13±1 30±1 – 13max.
B C
DA
Ferrite core
Plastic case
10
2
to 1
06
m m 2.4 to 2.6mm
Material: 66-nylon(natural color)
(5/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series ZCAT Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
• Test conditions: When passing through an impedance meter (unloaded) ø1mm copper cable
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
ZCAT1518-0730 ZCAT2017-0930 ZCAT2032-0930
ZCAT2132-1130 ZCAT3035-1330
Impedance( )min.
Part No.
[10 to 100MHz] [100 to 500MHz] [50 to 500MHz]
25 50 — ZCAT1518-0730(-BK)
20 50 — ZCAT2017-0930(-BK)
50 100 — ZCAT2032-0930(-BK)
40 80 — ZCAT2132-1130(-BK)
80 150 — ZCAT3035-1330(-BK)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
(6/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series
ZCAT-A Type
SHAPE & DIMENSIONS
Dimensions in mm
INTERNAL CONSTRUCTION
Part No. A B C D E
Applicable cable
outer diameter
ZCAT1325-0530A(-BK) 25±1 20±1 5±1 12.8±1 11.2±1 3 to 5(USB)
ZCAT1730-0730A(-BK) 30±1 23±1 7±1 16.5±1 15±1 4 to 7(USB/IEEE1394)
ZCAT2035-0930A(-BK) 35±1 28±1 9±1 19.5±1 17.4±1 6 to 9
ZCAT2235-1030A(-BK) 35±1 28±1 10±1 21.5±1 20±1 8 to 10
ZCAT2436-1330A(-BK) 36±1 29±1 13±1 23.5±1 22±1 10 to 13
B
D
A
C
E
Ferrite core
Plastic case
(7/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series ZCAT-A Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
• Test conditions: When passing through an impedance meter (unloaded) ø1mm copper cable
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
ZCAT1325-0530A ZCAT1730-0730A ZCAT2035-0930A
ZCAT2235-1030A ZCAT2436-1330A
Impedance( )min.
Part No.
[10 to 100MHz] [100 to 500MHz] [50 to 500MHz]
50 100 — ZCAT1325-0530A(-BK)
40 80 — ZCAT1730-0730A(-BK)
50 100 — ZCAT2035-0930A(-BK)
50 100 — ZCAT2235-1030A(-BK)
30 80 — ZCAT2436-1330A(-BK)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
(8/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series
ZCAT-B Type
SHAPE & DIMENSIONS
Dimensions in mm
• Chassis fixed type attachment hole: ø4.8 to 4.9mm, Plate thickness: 0.5 to 2mm
INTERNAL CONSTRUCTION
Part No. A B C D E
Applicable cable
outer diameter
ZCAT2017-0930B(-BK) 21±1 17±1 9±1 20±1 (29) 9max.
CD
B
A
E
Ferrite core
Plastic case
(9/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series ZCAT-B Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
• Test conditions: When passing through an impedance meter (unloaded) ø1mm copper cable
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
ZCAT2017-0930B
Impedance( )min.
Part No.
[10 to 100MHz] [100 to 500MHz] [50 to 500MHz]
20 50 — ZCAT2017-0930B(-BK)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
(10/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series
ZCAT-D, ZCAT-DT Type
SHAPE & DIMENSIONS
Dimensions in mm
Double-sided tape fixed type (tape included when shipped).
INTERNAL CONSTRUCTION
Part No. A B C D E
Applicable cable
outer diameter
ZCAT3618-2630D(-BK) 35.5±1 17.5±1 26±1 11.5±1 – For 20 wires flat cable
ZCAT3618-2630DT(-BK) 35.5±1 17.5±1 26±1 12.5±1 – For 20 wires flat cable
ZCAT4625-3430D(-BK) 45.5±1 24.5±1 34±1 12±1 – For 26 wires flat cable
ZCAT4625-3430DT(-BK) 45.5±1 24.5±1 34±1 13±1 – For 26 wires flat cable
ZCAT6819-5230D(-BK) 67.5±1 18.5±1 52±1 16±1 – For 40 wires flat cable
ZCAT6819-5230DT(-BK) 67.5±1 18.5±1 52±1 17±1 – For 40 wires flat cable
C
D
A
B
Applicable cable
thickness:
1.3mm max.
Ferrite core
Plastic case
(11/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series ZCAT-D, ZCAT-DT Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
• Test conditions: When passing through an impedance meter (unloaded) ø1mm copper cable
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
ZCAT3618-2630D ZCAT4625-3430D ZCAT6819-5230D
Impedance( )min.
Part No.
[10 to 100MHz] [100 to 500MHz] [50 to 500MHz]
— — 30 ZCAT3618-2630D(T)(-BK)
— — 35 ZCAT4625-3430D(T)(-BK)
— — 35 ZCAT6819-5230D(T)(-BK)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
1 10 100 1000
1000
100
10
1
Im pe da nc e ( Ω
)
Frequency (MHz)
(12/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series
ZCAT10D, 13D, 20D Type
SHAPE & DIMENSIONS
Dimensions in mm
INTERNAL CONSTRUCTION
Part No. A B C D E
Applicable cable
outer diameter
ZCAT 10D-(BK) 27±1 14.5±1 10±1 4±1 7±1 4max.
ZCAT 13D-(BK) 34±1 20±1 13±1 5±1 8.5±1 5max.
ZCAT 20D-(BK) 35±1 30±1 20±1 5±1 15±1 5max.
A
B E
D
C
Ferrite core
Plastic case
(13/13)
001-01 / 20130723 / e9a15_zcat.fm
• All specifications are subject to change without notice.
E M C C o m p o n e n t s
ZCAT series ZCAT10D, 13D, 20D Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
• Test conditions: When passing through an impedance meter (unloaded) ø1mm copper cable
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
ZCAT10D ZCAT13D ZCAT20D
Impedance( )min.
Part No.
[10 to 100MHz] [100 to 500MHz] [50 to 500MHz]
25 70 — ZCAT 10D-(BK)
40 100 — ZCAT 13D-(BK)
60 150 — ZCAT 20D-(BK)
1 10 100 1000
1000
100
10
Im pe da nc e ( Ω
)
Frequency (MHz)
11 10 100 1000
1000
100
10
Im pe da nc e ( Ω
)
Frequency (MHz)
1
1 10 100 1000
1000
100
10
Im pe da nc e ( Ω
)
Frequency (MHz)
1

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10