Duratec HE Assembly Manual.pdf

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

ADDED, SHEET, NOTE, REVISED, CHANGED, ASSEMBLY, TORQUE, TIGHTENING, R.OKITA, NUMBER, PART, ENGINE, DATE, CLEARANCE, AC-C, C1S7G-543-AC, DESCRIPTION, PROCEDURE, CONFIDENTIAL, INSTRUCTIONS, PROCEDURES, MODEL, SPECIFICATIONS, LIMITS, T.KADOWAKI, NAME/TITLE, CONTD.RELEASE, DELETED, NO.SPECIFICATION, DRAWING

Transcript

Engine Assembly 543 Chart
C1S7G-543-AC
Revision BP
EN00 E 11290169 002 020110
Issue Date: 10 January, 2002
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
980116 AA-A ALL INITIAL RELEASE EN00F10663108056 Y.TANAKA
981026 AB-A ALL UPDATED EN00F10663108085 Y.TANAKA
981202 AB-B 3 CORRECTED TYPOGRAPHICAL ERROR EN00I10819645029 Y.TANAKA
AB-B 5 REVISED PISTON CLEARANCE DUE TO ADDITIONAL COATING
AB-B 6 ADDED 2ND RING SERVICE PROCEDURE
AB-B 10 CORRECTED MODEL NAME
AB-B 17 INCREASED MAIN BEARING GRADE NUMBER
AB-B 23 CORRECTED MODEL NAME
AB-B 24-A CORRECTED MODEL NAME
AB-B 28 ADDED NOTE OF REF DIMENSION
AB-B 29-B REVISED OIL FILL QUANTITIES
AB-B 30 ADDED MISSING SHEET
AB-B 31 ADDED MISSING SHEET
AB-B 32 ADDED MISSING SHEET
AB-B ADDED NOTE OF REF DIMENSION
AB-B 33 ADDED MISSING SHEET
AB-B 48-A ADDED NOTE OF REF DIMENSION
AB-B 48-B ADDED NOTE OF REF DIMENSION
AB-B 58 ADDED NOTE OF REF DIMENSION
AB-B 72-A ADDED NOTE OF OILING
AB-B 72-B ADDED NOTE OF OILING
AB-B 77-A UPDATED OIL COOLER
AB-B 79 CORRECTED NOTE
981202 AB-B 83 CORRECTED NOTE EN00I10819645029 Y.TANAKA
990225 AC-C 3 ADDED FACTORY FILL OIL SPEC EN00I10819645017 Y.TANAKA
AC-C 5 ADDED (REF) TO DIMENSION
AC-C 12 REVISED NOTE
AC-C 21-B ADDED SELECTION OF CONROD BEARING COLOUR
AC-C 22 REVISED NOTE
AC-C 26 REVISED FASTENING PROCEDURE
AC-C 27 CHANGED DOWEL INSERTION HEIGHT
AC-C 30-A UPDATED FASTENER AND REVISED FATENEING PROCEDURE
AC-C 30-B UPDATED FASTENER AND REVISED FATENEING PROCEDURE
AC-C 34 ADDED COMBINATION CHART OF I.D. TAB
AC-C 36 ADDED NOTICE OF AVDEL PLUG INSERTION
AC-C 37 DELETED NOTE
AC-C 38 ADDED (REF) TO DIMENSION
AC-C 42 REVISED CYL.HEAD BOLD FASTENING PROCEDURE
AC-C 44 REVISED NOTE OF CAM CAP BOLT FASTENING PROCEDUR
AC-C 45 REVISED CAM CAP BOLT FASTENING PROCEDURE
AC-C 50 ADDED PARTS NUMBER OF ENGINE MOUNT STUD
AC-C 52-A DELEDTE NOTE AND REVISED FASTENING PROCEDURE
AC-C 52-B REVISED FASTENING PROCEDURE
AC-C 54 ADDED MZADA PARTS NUMBER
AC-C 55 ADDED NOTE OF TIMING PIN
AC-C 56 ADDED NOTE OF TIMING PIN
990225 AC-C 57 ADDED MZADA PARTS NUMBER EN00I10819645017 Y.TANAKA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS
C1S7G-543-AC D EN00E10967761000 99-04-28 2001 2.0L-4V NON DI CD132 1 1A
REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990225 AC-C 58 REVISED NOTE EN00I10819645017 Y.TANAKA
AC-C 60-A ADDED STUD END FASTENER AND REVISED FASTENING PROCEDURE
AC-C 60-B ADDED STUD END FASTENER AND REVISED FASTENING PROCEDURE
AC-C 61-A ADDED MAZDA PARTS NUMBER
AC-C 61-B ADDED MAZDA PARTS NUMBER
AC-C 62-B ADDED MAZDA PARTS NUMBER
AC-C 63 CHANGED ASSEMBLY ORDER
AC-C 64-A ADDED MAZDA PARTS NUMBER AND ASSEMBLY ANGLE
AC-C 64-B ADDED MAZDA PARTS NUMBER AND NOTE TO ANGLE
AC-C 66-A CHANGED ASSEMBLY ORDER
AC-C 66-B ADDED SHEET OF EGR BLANKING PLATE ASSEMBLE PROCEDURE
AC-C 69-A REMOVED WATER TEMP SENDER AND ADDED MAZDA PARTS NUMBER
AC-C 69-B REMOVED ENG.COOLING TEMP SENDER AND ADDED MAZDA PARTS NO.
AC-C 71-A ADDED NOTE OF HOSE CLAMP TAB
AC-C 71-B ADDED NOTE OF HOSE CLAMP TAB
AC-C 72 CHANGED ASSEMBLY ORDER AND DELETED NOTE
AC-C 73-A ADDED NOTE AND UPDATED PILSE DAMPER LOCATION
AC-C 73-B ADDED NOTE AND UPDATED PILSE DAMPER LOCATION
AC-C 74-B REVISED FASTENER NUMBER
AC-C 75 REVISED M8 FASTENER TORQUE
AC-C 76-A CHANGED ASSEMBLY ORDER AND ADDED NOTE
AC-C 76-B CHANGED ASSEMBLY ORDER AND ADDED HOSE CLAMP
AC-C 77-A CHANGED ASSEMBLE PARTS
AC-C 77-B CHANGED ASSEMBLE PARTS AND LOCATION
AC-C 78-A ADDED NOTE
AC-C 82-A CHANGED ASEMBLE PARTES SHAPE
AC-C 82-B CHANGED ASSEMBLE PARTS SHAPE
AC-C 84-A ADDED MAZDA PARTS NUMBER
AC-C 84-B ADDED MAZDA PARTS NUMBER
AC-C 83 REVISED NOTE
AC-C 85 ADDED MAZDA PARTS NUMBER
990225 AC-C 88 ADDED SHEET OF IDLER ASSEMBLY PROCEDURE EN00I10819645017 Y.TANAKA
990428 D 2 ADDED ADAPTATION MATRIX EN00E10967761000 R.OKITA
D 7 ADDED NOTE I.HIROSE
D 9 REVISED PARTS NO. AND FRONT INDICATE MARK
D 10 REVISED FRONT INDICATE MARK OF PISTON
D 11-D ADDED SHEET FOR I5 I.HIROSE
D 14 CHANGED PIPE ASSEMBLE ANGLE AND SEALANT PART NO. R.OKITA
D 15-A ADDED NOET I.HIROSE
D 15-D ADDED SHEET FOR I5
D 16 ADDED NOET
D 17 CHANGED TOTAL CLEARANCE RANGE
D 18 CHANGED MAIN BEARING COLOUR CODING
D 19 ADDED NOTE FOR I5 AND DIMENSION CHANGED
D 20 REVICED ASSEMBLY PROCEDURE
D 21-A ADDED NOTE
990428 D 21-B ADDED NOTE EN00E10967761000 I.HIROSE
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC D EN00E10967761000 99-04-28 2001 2.0L-4V NON DI CD132 1A 1B
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990428 D 22 ADDED NOTE FOR I5 AND CHANGED DIMENSION EN00E10967761000 I.HIROSE
D 23-D ADDED SHEET FOR I5
D 24 UPDATED DRAWING
D 25-A UPDATED DRAWING
D 25-B REMOVED BAFFLE-CRANKSHAFT WINDAGE OIL I.HIROSE
D 26 REVISED NOTE AND ADDED FIGURE R.OKITA
D 28 REVISED DRAWING I.HIROSE
D 29 REVISED RTV MATERIAL R.OKITA
D 29-D ADDED SHEET FOR I5
D 30-D ADDED SHEET FOR I5
D 31-D ADDED SHEET FOR I5 R.OKITA
D 32-D ADDED SHEET FOR I5 I.HIROSE
D 33 REVISED RTV MATERIAL R.OKITA
D 35 ADDED NOTE FOR I5 N.TANAKA
D 37 ADDED NOTE FOR I5
D 38 ADDED NOTE FOR I5
D 39 ADDED NOTE FOR I5
D 40 ADDED NOTE FOR DI AND I5
D 41 ADDED NOTE FOR I5
D 42 REVISED NOTE FOR SINGLE WRENCH METHOD
D 42-D ADDED SHEET FOR I5
D 43 ADDED NOTE FOR I5
D 44 ADDED NOTE FOR I5
D 44-C ADDED SHEET FOR DI
D 45 ADDED NOTE FOR DI
D 45-D ADDED SHEET FOR I5 N.TANAKA
D 49-A REVISED RTV MATERIAL R.OKITA
D 49-B REVISED RTV MATERIAL
D 51 ADDED DRAWING FOR DI
D 52-A REVISED DRAWING
D 53-B REVISED DRAWING R.OKITA
D 54 ADDED NOTE T.KADOWAKI
D 56-C ADDED SHEET FOR DI
D 58 ADDED NOTE
D 58-C ADDED SHEET FOR DI T.KADOWAKI
D 59 REVISED NOTE R.OKITA
D 60 REVISED RTV MATERIAL
D 61-C ADDED SHEET FOR DI
D 61-D ADDED SHEET FOR I5 R.OKITA
D 62-C ADDED SHEET FOR DI T.KADOWAKI
D 64 ADDED MATRIX CHART T.TANAKA
D 65-A CHANGED ASSEMBLE ANGLE T.KADOWAKI
D 65-B CHANGED ASSEMBLE ANGLE
D 65-C ADDED SHEET FOR DI T.KADOWAKI
D 66-D ADDED SHEET FOR I5 N.TANAKA
D 69-C ADDED SHEET FOR DI R.OKITA
990428 D 70-C ADDED SHEET FOR DI EN00E10967761000 T.KADOWAKI
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC D EN00E10967761000 99-04-28 CD132 1B 1C
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990428 D 71-C ADDED SHEET FOR DI EN00E10967761000 R.OKITA
D 72-C ADDED SHEET FOR DI T.TANAKA
D 73-A CHANGED ECT LOCATION T.KADOWAKI
D 73-C ADDED SHEET FOR DI T.KADOWAKI
D 76-A REVISED NOTE R.OKITA
D 76-B REVISED NOTE
D 76-C ADDED SHEET FOR DI
D 76-D ADDED SHEET FOR I5 R.OKITA
D 78-A ADDED MATRIX FOR DISCRIMINATION AND REVISED NOTE T.KADOWAKI
D 78-B REVISED NOTE
D 78-C ADDED SHEET FOR DI
D 79-C ADDED SHEET FOR DI
D 80-C ADDED SHEET FOR DI T.KADOWAKI
D 81-C ADDED SHEET FOR DI T.TANAKA
D 82-C ADDED SHEET FOR DI T.KADOWAKI
D 83-C ADDED SHEET FOR DI T.TANAKA
D 84-C ADDED SHEET FOR DI
D 85-C ADDED SHEET FOR DI
D 85-D ADDED SHEET FOR I5
D 86-D ADDED SHEET FOR I5
D 87-B ADDED TIGHETNING ORDER
D 87-C ADDED SHEET FOR DI
D 87-D ADDED SHEET FOR I5
D 88-A REVISED NOTE
D 88-C ADDED SHEET FOR DI
D 88-D ADDED SHEET FOR I5 T.TANAKA
D 89-B ADDED NOTE T.TANAKA
D 89-D ADDED SHEET FOR I5 T.KADOWAKI
D 90-C ADDED SHEET FOR DI
D 91-C ADDED SHEET FOR DI
D 92-B REVISED DRAWING
D 92-C ADDED SHEET FOR DI T.KADOWAKI
D 93-A DRAWING UPDATE I.HIROSE
D 93-B DRAWING UPDATE
D 94 CHANGED FASTENER I.HIROSE
D 95-A ADDED NOTE T.TANAKA
D 95-B ADDED NOTE
D 95-D ADDED SHEET FOR I5
D 96-B ADDED SHEET FOR RANGER I4
D 96-D ADDED SHEET FOR I5 T.TANAKA
D 97-A REVISED MODEL DESCRIPTION AND NOTE R.OKITA
D 99 ADDED NOTE T.KADOWAKI
D 100-C ADDED SHEET FOR DI
D 101-C ADDED SHEET FOR DI
D 102-C ADDED SHEET FOR DI T.KADOWAKI
D 103-C ADDED SHEET FOR DI R.OKITA
D 107-B REVISED NOTE
990428 D OTHER REVISED SHEET NO. EN00E10967761000 R.OKITA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC D 0 99-04-28 2001 2.0L-4V NON DI CD132 1C 2
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990630 E 42 REVISED TIGHTENING PROCEDURE EN00E10986253000 Y.TANAKA
44 ADDED CAMSHAFT THRUST CLEARANCE
44-C ADDED CAMSHAFT THRUST CLEARANCE
47 CHANGED FASTENER
990630 E 48 CHANGED TIGHTENING TORQUE EN00E10986253000 Y.TANAKA
990806 F 27 ADDED DOWEL ATTACHING INSTRUCTION EN00E10994808000 I.HIROSE
32 ADDED DOWEL ATTACHING INSTRUCTION
990806 F 75 REVISED TIGHTENING TORQUE EN00E10994808000 I.HIROSE
990901 G 23-A ADDED THE NUMBER OF REUSE OF BEARING CAP BOLT EN00E10998905000 I.HIROSE
23-D ADDED THE NUMBER OF REUSE OF BEARING CAP BOLT
30-E ADDED SHEET
990901 G 30-D CHANGED SHEET NUMBER EN00E10998905000 I.HIROSE
990906 H 4-A ADDED NOTE FOR ELECTRIACL CONNECTIONS EN00E11007392000 T.KADOWAKI
6 REVISED NOTE I.HIROSE
7 REVISED NOTE
8 REVISED NOTE
9 REVISED NOTE
10 ADDED NOTE FOR CYL.BORE LUBRICATING
11 REVISED TIGHTENING TORQUE DESCRIPTION
12 REVISED TIGHTENING TORQUE DESCRIPTION I.HIROSE
14 REVISED NOTE R.OKITA
14-D ADDED SHEET FOR I5 R.OKITA
15-A ADDED NOTE FOR BEARING LUBRICATING I.HIROSE
15-D ADDED NOTE FOR BEARING LUBRICATING
16 REVISED NOTE
17 REVISED NOTE
18 REVISED BEARING COLOR
19 ADDED NOTE
20 REVISED NOTE
21-A REVISED NOTE
21-B REVISED NOTE
22 REVISED NOTE
23-A REVISED NOTE
23-D REVISED NOTE
24 REVISED TIGHTENING TORQUE DESCRIPTION
25-A REVISED TIGHTENING TORQUE DESCRIPTION
25-B REVISED TIGHTENING TORQUE DESCRIPTION
25-E ADDED SHEET FOR BALANCE SHAFT
25-F ADDED SHEET FOR BALANCE SHAFT
25-G ADDED SHEET FOR BALANCE SHAFT
25-H ADDED SHEET FOR BALANCE SHAFT I.HIROSE
26 REVISED NOTE R.OKITA
28 ADDED TORQUE STEPS I.HIROSE
29 REVISED NOTE AND ADDED RTV MATERIAL R.OKITA
29-D REVISED NOTE AND ADDED RTV MATERIAL
30-A REVISED NOTE
30-B REVISED NOTE
30-D REVISED NOTE
990906 H 31 DELETED SERVICE INFORMATION EN00E11007392000 R.OLITA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E117392000 99-09-06 2001 2.0L-4V NON DI CD132 1D 1E
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990906 H 31-D DELETED SERVICE INFORMATION EN00E11007392000 R.OKITA
33 REVISED NOTE AND ADDED RTV MATERIAL R.OKITA
35 REVISED TIGHTENING TORQUE DESCRIPTION N.TANAKA
37 REVISED TIGHTENING TORQUE DESCRIPTION
38 REVISED TIGHTENING TORQUE DESCRIPTION AND REVISED NOTE
39 REVISED TIGHTENING TORQUE DESCRIPTION
40 REVISED TIGHTENING TORQUE DESCRIPTION
44 REVISED NOTE
44-C REVISED NOTE
45 REVISED TIGHTENING TORQUE DESCRIPTION
45-D REVISED TIGHTENING TORQUE DESCRIPTION
46 REVISED TIGHTENING TORQUE DESCRIPTION
47 COORECT PARTS NUMBER
48 REVISED TIGHTENING TORQUE DESCRIPTION N.TANAKA
49-A REVISED NOTE, ADDED RTV MATERIAL AND CORRECT DIMENSION R.OKITA
49-B REVISED NOTE, ADDED RTV MATERIAL AND CORRECT DIMENSION
49-E ADDS SHEET FOE 2.3L E/W
50 REVISED TIGHTENING TORQUE DESCRIPTION
51 REVISED NOTE
52-A REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
52-B REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
52-E MOVED FROM 107-A AND ADDED NOTE
53-A DELETED SERVICE INFORMATION
53-B DELETED SERVICE INFORMATION R.OKITA
54 ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION T.KADOWAKI
55 ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION I.HIROSE
56-C ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION T.KADOWAKI
57 REVISED NOTE I.HIROSE
58 CHANGED TIGHTENING TORQUE T.KADOWAKI
58-C CHANGED TIGHTENING TORQUE
58-D ADDED SHEET FOR I5 T.KADOWAKI
59 REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION R.OKITA
60 REVISED NOTE AND ADDED RTV MATERIAL
61-A REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
61-B REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
61-C REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
61-D REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION R.OKITA
62-A CHANGED PARTS NUMBER ABD ADDED MATRIX T.KADOWAKI
62-B COMBINED TO 62-A
62-C REVISED TIGHTENING TORQUE DESCRIPTION
63-B CHANGED TIGHTENING TORQUE TORELANCE
63-D ADDED SHEET FOR I5 T.KADOWAKI
64 REVISED TIGHTENING TORQUE DESCRIPTION T.TANAKA
65-A CHANGED TIGHTENING TORQUE TORELANCE T.KADOWAKI
65-B CHANGED TIGHTENING TORQUE TORELANCE
65-C CHANGED TIGHTENING TORQUE TORELANCE T.KADOWAKI
66-A CHANGED TIGHTENING TORQUE TORELANCE N.TANAKA
66-B CHANGED TIGHTENING TORQUE TORELANCE
990906 H 66-D CHANGED TIGHTENING TORQUE TORELANCE EN00E11007392000 N.TANAKA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H 0 99-09-06 2001 2.0L-4V NON DI CD132 1E 1F
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990906 H 67-A ADDED DRAWING AND CHANGED TIGHTENING TORQUE TORELANCE EN00E11007392000 T.KADOWAKI
67-B ADDED DRAWING AND CHANGED TIGHTENING TORQUE TORELANCE
67-D ADDED SHEET FOR N/S EGR VALVE T.KADOWAKI
68 ADDED NOTE AND CHANGED TIGHTENING TORQUE TORELANCE R.OKITA
69-C REVISED NOTE AND ADDED RTV MATERIAL
71-A REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
71-B REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION
71-C REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION R.OKITA
72-C REVISED TIGHTENING TORQUE DESCRIPTION T.KADOWAKI
73-A REVISED TIGHTENING TORQUE DESCRIPTION
73-B REVISED TIGHTENING TORQUE DESCRIPTION
73-C REVISED TIGHTENING TORQUE DESCRIPTION
73-D REVISED TIGHTENING TORQUE DESCRIPTION
74-D REVISED TIGHTENING TORQUE DESCRIPTION T.KADOWAKI
75 REVISED TIGHTENING TORQUE DESCRIPTION I.HIROSE
76-A ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION R.OKITA
76-B ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION
76-C ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION
76-D ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION R.OKITA
77 REVISED TIGHTENING TORQUE DESCRIPTION T.TANAKA
78-A REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION T.GOTO
78-B REVISED NOTE AND TIGHTENING TORQUE DESCRIPTION T.GOTO
85-A REVISED TIGHTENING TORQUE DESCRIPTION T.TANAKA
85-B REVISED TIGHTENING TORQUE DESCRIPTION
87-B ADDED NOTE AND REVISED TIGHTENING TORQUE DESCRIPTION
88-A UPDATED DRAWING T.TANAKA
89-A ADDED DRAWING AND CHANGED TIGHTENING TORQUE TORELANCE T.KADOWAKI
89-B ADDED DRAWING AND CHANGED TIGHTENING TORQUE TORELANCE
89-D ADDED DRAWING AND CHANGED TIGHTENING TORQUE TORELANCE
89-F ADDED SHEET FOR SOLENOID VALVA ASSEMBLING
89-G ADDED SHEET FOR SOLENOID VALVA ASSEMBLING
90-A ADDED SHEET FOR E/W ABSOLUTE PRESS SENSOR
90-B ADDED SHEET FOR N/S ABSOLUTE PRESS SENSOR
90-C REVISED TIGHTENING TORQUE DESCRIPTION
91-A ADDED FASTENING SEQUENCE AND MATRIX
91-B ADDED FASTENING SEQUENCE
91-C ADDED FASTENING SEQUENCE
92-A ADDED NOTE
92-B ADDED NOTE T.KADOWAKI
93-A REVISED TIGHTENING TORQUE DESCRIPTION I.HOROSE
93-B REVISED TIGHTENING TORQUE DESCRIPTION
94 REVISED TIGHTENING TORQUE DESCRIPTION I.HOROSE
95-A UPDATED DRAWING T.TANAKA
95-B UPDATED DRAWING
96-B REVISED TIGHTENING TORQUE DESCRIPTION T.TANAKA
97-A ADDED DRAING AND REVISED NOTE R.OKITA
98-A ADDED NOTE T.KADOWAKI
98-B ADDED NOTE
990906 H 99 REVISED NOTE EN00E11007392000 T.KADOWAKI
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H 0 99-09-06 2001 2.0L-4V NON DI CD132 1F 1G
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
990906 H 103-C ADDED NOTE EN00E11007392000 R.OKITA
104-A ADDED NOTE
104-B DELETED R.OKITA
105 CHANGED TIGHTENING TORQUE N.TANAKA
106-A MOVED TO 52-E R.OKITA
107-A ADDED NOTE
107-B ADDED NOTE
990906 H OTHER SHEET NUMBER CHANGE EN00E11007392000 R.OKITA
991005 J 107-B SHEET NUMBER CHANGE EN01E10877065001 R.OKITA
108 ADDED SHEET FOR HOSE - EVAP
991005 J 109 ADDED SHEET FOR VACUUM HARNESS EN01E10877065001 R.OKITA
991213 K 24 CHANGED TIGHTENING PROCEDURE EN00E11026968000 T.MITSUHARA
991214 L 93-A CHANGED BOLT TYPE EN00E11035651 000 T.MITSUHARA
991214 L 93-B CHANGED BOLT TYPE EN00E11035651 000 T.MITSUHARA
000126 M 66-B CHANGED FRONT LIFTING EYE EN00E11054241 000 N.TANAKA
000126 M 105 CHANGED OIL GALLERY PLUG EN00E11054241 000 N.TANAKA
000210 N 2 UPDATED EN00E11030674 000 R.OKITA
3 UPDATED R.OKITA
7 REVISED INCORRECT DRAWING S.HASETOH
14 REVISED ANAEROBIC SEALER MATERIAL R.OKITA
20 REVISED INDICATION CONROD CRANK END DIAMETER S.HASETOH
25-F REVISED DRAWING
25-G REVISED DRAWING AND BALANCER ROTATION TORQUE S.HASETOH
28-A ADDED SHEET FOR FLEXPLATE R.OKITA
28-B ADDED SHEET FOR DUAL MASS FLYWHEEL
29 REVISED RTV SPECIFICATION R.OKITA
30-E REVISED DRAWING T.MITSUHARA
33 REVISED RTV SPECIFICATION R.OKITA
35 REVISED ANAEROBIC SEALER MATERIAL N.TANAKA
46-E ADDED SHEET FOR VVT/BALANCE SHAFT OIL PUMP CHAIN
47-E ADDED SHEET FOR VVT ACTUATOR AND SPROCKET
48-E ADDED SHEET FOR VVT TIMING CHAIN AND GUIDE N.TANAKA
49-A REVISED RTV SPECIFICATION R.OKITA
49-B REVISED RTV SPECIFICATION
49-E REVISED RTV SPECIFICATION R.OKITA
61-E ADDED SHEET FOR VVT OCV N.TANAKA
61-F ADDED SHEET FOR VVT OCV
61-G ADDED SHEET FOR VVT OIL PIPE N.TANAKA
64 ADDED NOTE T.TANAKA
67-B ADDED NOTE T.TANAKA
69-C REVISED RTV SPECIFICATION R.OKITA
85-A ADDED NOTE T.TANAKA
85-B ADDED NOTE
87-E ADDED SHEET FOR GASHOL AND LEADED ENGINE
87-F ADDED SHEET FOR AUDIO GROUND STRAP
88-A REVISED NOTE
88-B MODIFIED DRAWING T.TANAKA
90-A MODIFIED NOTE K.KADOWAKI
000210 N 90-B MODIFIED NOTE EN00E11030674 000 K.KADOWAKI
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC N EN00 E 11030674 000 00-02-10 2001 2.0L-4V NON DI CD132 1G 1H
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
000210 N 90-C MODIFIED NOTE EN00E11030674 000 T.TANAKA
95-A REVISED DRAWING T.TANAKA
95-B REVISED DRAWING T.TANAKA
107-A CHANGED FASTENER R.OKITA
107-B CHANGED FASTENER
110 ADDED SHEET FOR CLUTCH ASSEMBLY
000210 N OTHER REVISED SHEET NUMBER EN00E11030674 000 R.OKITA
000331 P 4-A ADDED NOTE FOR CC, A/AR RANK EN00E11045491000 R.OKITA
14 REVISED NOTE FOR SEALANT R.OKITA
28 ADDED CC, A RANK MARK S.HASETO
30-E ADDED AR RANK MARK AND NOTE FOR LEGAL CODE MITSUHARA
48 ADDED CC, A RANK MARK N.TANAKA
48-E ADDED CC, A RANK MARK N.TANAKA
55 ADDED CC, A RANK MARK S.HASETO
000331 P 59 REVISED NOTE FOR ASSISTANT MATERIAL EN00E11045491000 R.OKITA
000420 R 9 CHANGED PISTON PIN ASSEMBLE DIMENSION EN00E11069681001 S.HASETO
20 CHANGED CONROD BOLT TIGHTENING PROCEDURE
22 CHANGED NOTE
25-E CHANGED TO ONE TURLET DESIGN
25-F CHANGED TO ONE TURLET DESIGN
25-G CHANGED TO ONE TURLET DESIGN
25-H CHANGED TO ONE TURLET DESIGN S.HASETO
44 CHANGED CAM CAP FASTENER N.TANAKA
44-C CHANGED CAM CAP FASTENER N.TANAKA
52-A CHANGED FASTENER TIGHTENING ORDER FOR SINGLE SPINDLE R.OKITA
52-B CHANGED FASTENER TIGHTENING ORDER FOR SINGLE SPINDLE R.OKITA
56-C ADDED ASSEMBLY PROCEDURE T.KADOWAKI
61-C CHANGED STUD END FASTENER LOCATION R.OKITA
62-C ADDED NOTE T.KADOWAKI
65-A ADDED SIDE VIEW
65-B ADDED SIDE VIEW
65-C ADDED SIDE VIEW T.KADOWAKI
69-C UPDATED DRAWING R.OKITA
71-C UPDATED DRAWING R.OKITA
73-C UPDATED DRAWING T.KADOWAKI
74-C UPDATED DRAWING T.KADOWAKI
76-C UPDATED DRAWING R.OKITA
78-A ADDED CC, A RANK MARK FOR FUEL RAIL TIGHTENING TORQUE T.GOTO
78-B ADDED CC, A RANK MARK FOR FUEL RAIL TIGHTENING TORQUE T.GOTO
80-C ADDED NOTE T.KADOWAKI
89-D REVISED SHEET NUMBER T.TANAKA
89-E ADDED SHEET FOR SOLENOID VALVE FOR VIS INT.MANIFOLD T.TANAKA
90-C UPDATED DRAWING T.KADOWAKI
91-A REVISED PARTS REVISION
91-B REVISED PARTS REVISION
91-C REVISED PARTS REVISION
92-C UPDATED DRAWING
98-A REVISED NOTE
000420 R 98-B REVISED NOTE EN00E11069681001 T.KADOWAKI
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC R EN00 E 11069681 001 00-04-20 2001 2.0L-4V NON DI CD132 1H 1J
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
000420 R 100-C UPDATED DRAWING EN00E11069681001 T.KADOWAKI
000420 R 103-C UPDATED DRAWING EN00E11069681001 R.OKITA
000428 S 99 REVISED SHEET NUMBER EN00E11081197000 T.KADOWAKI
99-B ADDED SHEET FOR MEGA HARNESS
100-D ADDED SHEET FOR MEGA HARNESS
100-E ADDED SHEET FOR MEGA HARNESS
100-G ADDED SHEET FOR MEGA HARNESS
100-H ADDED SHEET FOR MEGA HARNESS
100-J ADDED SHEET FOR MEGA HARNESS
100-K ADDED SHEET FOR MEGA HARNESS
100-L ADDED SHEET FOR MEGA HARNESS
100-M ADDED SHEET FOR MEGA HARNESS
000428 S 100-N ADDED SHEET FOR MEGA HARNESS EN00E11081197000 T.KADOWAKI
000630 T 2 REVISED MATRIX EN00E11095813000 R.OKITA
3 REVISED PAGE NUMBER R.OKITA
39 REVISED VALVE SPRING DIRECTION AND ADDED NOTE N.TANAKA
48-E ADDED CC, A RANK MARK FOR EXH. CAM PULLEY N.TANAKA
59 REVISED NOTE FOR ASSISTANT MATERIAL R.OKITA
62-A CHANGED FASTENING TORQUE FOR SPARK PLUG T.KADOWAKI
62-C REMOVED DUE TO INCORPORATION INTO 62-A T.KADOWAKI
64 ADDED MATRIX FOR PCV VALVE CAP COLOR T.TANAKA
70-C REVISED DRAWING TO 1.8L DI CP DESIGN T.GOTO
78-C REVISED DRAWING TO 1.8L DI CP DESIGN
79-C REVISED DRAWING TO 1.8L DI CP DESIGN
82-C REVISED DRAWING TO 1.8L DI CP DESIGN
83-C REVISED SHEET AS REMOVAL PROCEDURE T.GOTO
84-C CHANGED SHEET NUMBER R.OKITA
84-D ADDED AND REVISED SHEET TO 1.8L DI CP DESIGN T.TANAKA
87-C REVISED DRAWING TO 1.8L DI CP DESIGN
88-C REVISED DRAWING TO 1.8L DI CP DESIGN
96-B ADDED FASTENING PROCEDURE FOR SINGLE SPINDLE T.TANAKA
110 CHANGED SHEET NUMBER R.OKITA
000630 T 111 ADDED SHEET FOR ENGINE LABEL ON CAM COVER EN00E11095813000 R.OKITA
000711 U 2 REVISED MATRIX EN00E11085584000 R.OKITA
60 CHANGED SHEET NUMBER N.TANAKA
60-C ADDED SHEET FOR DI CAM CAP RTV N.TANAKA
62-A ADDED SPEC FOR 2.3L E/W T.KADOWAKI
000711 U 98-B REVISED NOTE EN00E11085584000 T.KADOWAKI
000908 V 1-E REVISED REVISION NOTE OF SHEET 37, 38, 39 EN00E11124480001 R.OKITA
2 ADDED MATRIX FOR SHEET 12-A R.OKITA
8 REVISED NOTE S.HASETO
12 CHANGED SHEET NUMBER T.MITSUHARA
12-A ADDED SHEET FOR NON VVT BLOCK (2003MY) T.MITSUHARA
000908 V 26 ADDED NOTE OF FASTENER TIGHTENING PROCEDURE EN00E11124480001 N.TANAKA
001001 W 2 DELETED I5 ADAPTATION EN00E11140144000 R.OKITA
11-D DELETED I5 SHEET
14-D ADDED SHEET FOR 2.3L E/W INSTEAD OF I5 R.OKITA
15-A CORRECTED PARTS NUMBER S.HASETO
001001 W 15-D DELETED I5 SHEET EN00E11140144000 R.OKITA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2001 2.0L-4V NON DI CD132 1J 1K
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
001001 W 17 CORRECTED NOTE FOR BEARING CLEARANCE CALCULATION EN00E11140144000 S.HASETO
20 CORRECTED NOTE FOR BEARING CLEARANCE CALCULATION
23-A CORRECTED MAZDA PARTS NUMBER S.HASETO
23-D DELETED I5 SHEET R.OKITA
25-E UPDATED BALANCE SHAFT ASSEMBLY PROCEDURE S.HASETO
25-F UPDATED BALANCE SHAFT ASSEMBLY PROCEDURE
25-G UPDATED BALANCE SHAFT ASSEMBLY PROCEDURE
25-H UPDATED BALANCE SHAFT ASSEMBLY PROCEDURE S.HASETO
29-D DELETED I5 SHEET R.OKITA
30-D DELETED I5 SHEET
32-D DELETED I5 SHEET R.OKITA
39 CORRECTED MAZDA PARTS NUMBER M.NISHIDA
42-D DELETED I5 SHEET R.OKITA
45-D DELETED I5 SHEET
58-D DELETED I5 SHEET
61-D DELETED I5 SHEET
63-D DELETED I5 SHEET
66-D DELETED I5 SHEET
71-C DRAWING UPDATE FOR DI DEGAS PIPE SHAPE CHANGE R.OKITA
72-C DRAWING UPDATE FOR DI EGR VALVE STUD T.TANAKA
76-C DRAWING UPDATE FOR DI DEGAS PIPE SHAPE CHANGE R.OKITA
76-D ADDED SHEET FOR 2.3L E/W INSTEAD OF I5
81-C DELETED DUPLICATE SHEET
85-D DELETED I5 SHEET
86-D DELETED I5 SHEET
87-D DELETED I5 SHEET
88-D DELETED I5 SHEET
89-D DELETED I5 SHEET
89-G DELETED I5 SHEET R.OKITA
93-B CORRECTED MAZDA PARTS NUMBER S.HASETO
95-D DELETED I5 SHEET R.OKITA
96-B ADDED COMMENT FOR EXH.MANI GASKET T.TANAKA
96-D DELETED I5 SHEET R.OKITA
101-C DELETED DUPLICATE SHEET
102-C DELETED DUPLICATE SHEET
001001 W 103-C DRAWING UPDATE FOR DI DEGAS PIPE SHAPE CHANGE EN00E11140144000 R.OKITA
001013 X 1K CORRCTED SHT. NO. ON REV."W" FROM 15-E/F/G/H TO 25-E/F/G/H EN00E11099311000 T.TANAKA
2 MODIFIED ADAPTATION MATRIX
4 ADDED NOTE FOR ASSISTANT MATERIAL
28-C ADDED SHEET FOR RANGER PILOT BEARING INSTALLATION T.TANAKA
76-A MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION R.OKITA
76-B MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION
76-C MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION
76-D MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION R.OKITA
88-A MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION T.TANAKA
88-B MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION
88-C MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION
95-A MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION T.TANAKA
001013 X 95-B MODIFIED NOTE FOR ASSISTANT MATERIAL SPECIFICATION EN00E11099311000 N.TANAKA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC X EN00E11099311000 00-10-13 2001 2.0L-4V NON DI CD132 1K 1L
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
001013 X Other CHANGED SHEET NUMBER EN00E11099311000 N.TANAKA
001103 Y 22 ADDED NOTE FOR PREVENTION OF HAMMERED MARKS/FLAWS ON BS GEAR EN00E11145063001 S.HASETO
23-A ADDED NOTE FOR PREVENTION OF HAMMERED MARKS/FLAWS ON BS GEAR
25-E ADDED NOTE FOR PREVENTION OF HAMMERED MARKS/FLAWS ON BS GEAR
25-F ADDED NOTE FOR PREVENTION OF HAMMERED MARKS/FLAWS ON BS GEAR
25-G ADDED NOTE FOR PREVENTION OF HAMMERED MARKS/FLAWS ON BS GEAR
001103 Y 25-H ADDED NOTE FOR PREVENTION OF HAMMERED MARKS/FLAWS ON BS GEAR EN00E11145063001 S.HASETO
001108 Z 44-C CHANGE THE SEALER MATERIAL AND THE APPLICATION PASS FOR DI REAR
CAM CAP
EN00E11072453000 N.TANAKA
001117 AA 2 REVISED ADAPTATION MATRIX FOR ADDITIONAL SHEET EN00E11087761000 N.TANAKA
3 REVISED INDEX FOR ADDITIONAL SHEET N.TANAKA
5 REMOVED REF DIMENSION OF BARCODE LOCATION MITSUHARA
14 REMOVED "REF" FROM W. BYPATSS PIPE ASSEMBLE ANGLE Y.HAYAMIZU
16
REMOVED "REF"FROM BEARING BEAM ALIGNMENT DIMENSION AND
REVISED "REF" TO "INFORMATIONONLY" REGARDING CRANKSHAFT AXIAL
MITSUHARA
23A
REMOVED "REF" FROM BEARING BEAM ALIGNMENT DIMENSION AND
REVISED NOTE
MITSUHARA
30-D ADDED SHEET FOR OIL PAN ASSEMBLY WITH BALANCE SHAFT N.TANAKA
44
CHANGED "REF" TO "INFORMATION ONLY" REGARDING CAM SHAFT
THRUST CLEARANCE AND REMOVED I5 DESCRIPTION
44-C
CHANGED "REF" TO "INFORMATION ONLY" REGARDING CAM SHAFT
THRUST CLEARANCE
44-D ADDED SHEET FOR CAM CAP ASSEMBLE PROCEDURE OF DUAL VVT HEAD
44-E ADDED SHEET FOR CAM CAP ASSEMBLE PROCEDURE OF DUAL VVT HEAD
44-F ADDED SHEET FOR CAM CAP ASSEMBLE PROCEDURE OF DI DUAL VVT HEAD
50 CHANGED SHEET NUMBER
50-A
ADDED SHEET FOR RTV APPLYING PROCEDURE OF DUAL VVT FRONT
COVER HALF MOON SEAL N.TANAKA
57
REMOVED "REF" FROM TIMING PIN TOOL DIMENSION AND REVISED "REF"
TO "INFORMATIONONLY" REGARDING PISTON TOPPING
S.HASETO
60 CHANGED SHEET NUMBER N.TANAKA
60-A ADDED SHEET OF RTV APPLYING PROCEDURE FOR DUAL VVT
61-D ADDED SHEET FOR INT.VVT CAM COVER AEEMBLE PROCEDURE N.TANAKA
61-G CHANGED SHEET NUMBER M.NISHIDA
61-J ADDED SHEET FOR DUAL VVT CAM COVER AEEMBLE PROCEDURE N.TANAKA
70-C REVISED NOTE T.GOTO
79-C REVISED NOTE T.GOTO
89-G ADDED SHEET FOR DI SOLENOID VALVE ASSEMBLE PROCEDURE T.KADOWAKI
90-C CHANGED SHEET NUMBER T.KADOWAKI
90-D ADDED SHEET FOR INT.MANI BLIND PLUG ASSY PROCEDURE OF S.A. RANGE N.TANAKA
91-A REVISED NOTE T.KADOWAKI
001117 AA 95-D ADDED SHEET FOR 2.3L E/W VACUME HOSE ASSEMBLE PROCEDURE EN00E11087761000 T.TANAKA
001204 AB 2 REVISED ADAPTATION MATRIX FOR ADDITIONAL SHEET EN00E11136863000 S.HASETO
16 REVISED NOTE FOR POSITIONING MAIN BEARING
23-A REVISED SHEET NUMBER
23-B ADDED SHEET FOR POSITIONING MAIN BEARING UPPER
001204 AB 23-C ADDED SHEET FOR POSITIONING MAIN BEARING LOWER EN00E11136863000 S.HASETO
001222 AC 93-A REVISED FILTER CAP TIGHTENING TORQUE EN00E11174039000 S.HASETO
010129 AD 78-C REVISED SHEET NUMBER EN00E11177532000 T.GOTO
78-D ADDED SHEET FOR FUEL RAIL ASSYEMBLY
78-E ADDED SHEET FOR FUEL RAIL ASSYEMBLY
95-D REVISED SHEET NUMBER
95-E ADDED SHEET FOR HOSES-VACUUM
010129 AD 95-F ADDED SHEET FOR HOSES-VACUUM EN00E11177532000 T.GOTO
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AE EN00E11157486001 01-01-31 2001 2.0L-4V NON DI CD132 1L 1M
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
010131 AE 16 REVISE CLEARANCE VALUE EN00E11157486001 M.SATOH
17 REVISE CLEARANCE EQUATION
20 REVISE CLEARANCE EQUATION
010131 AE 57 ADD DIMENSION OF TIMING PIN TOOL EN00E11157486001 M.SATOH
010209 AF 107-B CHANGE ASSEMBLY POSITIORAL TOLERANCE OF FAN PULLEY EN00E11151946000 Y.HAYAMIZU
010228 AG 70-C CHANGED THE LOW PRESSURE PIPE LOCATION AND LENGTH EN00E11134807003 T.GOTO
010228 AG 79-C CHANGED THE FUEL HOSE ROUTING AND THE SHAPE OF FUEL HOSE CLIP EN00E11134807003 T.GOTO
010328 AH 044-F CHANGED SHEET NUMBER EN00E11190272000 M.YAMAYA
044-G ADDED SHEET FOR SINGLE VVT ENG VAR TM SOL N.NISHIDA
044-H ADDED SHEET FOR DUAL VVT SOL-ENG VER TM SOL
046-E DELETED SHEET FOR VVT/BALANCE SHAFT OIL PUMP CHAIN
047-E CHANGED ASSEMBLY PROCEDURE
047-F ADDED SHEET FOR DUAL VVT ACTUATOR
048-E CORRECTED MAZDA PART NUMBER
048-F ADDED SHEET FOR DUAL VVT TIMING CHAIN AND GUIDE M.NISHIDA
058-D CHANGED SHEET NUMBER R.OKITA
058-E ADDED SHEET FOR CAMSHAFT POSITION SENSOR N.TABATA
061-E DELETED SHEET FOR VVT OCV M.NISHIDA
061-F DELETED SHEET FOR VVT OCV
061-G DELETED SHEET FOR VVT OIL PIPE M.NISHIDA
062-A ADDED SPEC FOR PZEV N.TABATA
073-D DELETED I5 SHEET
073-E ADDED SHEET FOR IGNITION COIL
081-C ADDED SHEET FOR ENGINE WIRE HARNESS ASSEMBLY PROCEDURE
091-A ADDED SPEC FOR 2.3L EW
091-B ADDED SPEC FOR 2.3L NS
092-C CHANGED SHEET NUMBER
092-D ADDED SHEET FOR KNOCK SENSOR ASSEMBLY PROCEDURE N.TABATA
093-A CHANGED MODEL NAME Y.YAMAMOTO
010328 AH 101-C ADDED SHEET FOR ENGINE WIRE HARNESS ASSEMBLY PROCEDURE EN00E11190272000 N.TABATA
010417 AJ 16 APPLIED ON SIDE FIT SURFACE OF THE MAIN BEARING BEAM EN00E11131462001 Y.INOUE
010417 AJ 23-A APPLIED ON SIDE FIT SURFACE OF THE MAIN BEARING BEAM EN00E11131462001 Y.INOUE
010507 AK 48 CHANGED TIGHTENING TORQUE EN00E11102086000 M.NISHIDA
48-E CHANGED TIGHTENING TORQUE
010507 AK 48-F CHANGED TIGHTENING TORQUE EN00E11102086000 M.NISHIDA
010508 AL 30-E CHANGE POSITION OF ENGINE TYPE AND ENGINE NO. STAMP EN00E11204632000 Y.INOUE
010528 AM 89-E CHANGED SOLENOID FIXING BOLT EN00E11210521001 F.TANAKA
010608 AN 3 CHANGED INDEX SHEET EN00E11208966001 C.MORISHIGE
25-F ADAPTED 19N(THRUST AT B/L MEASUREMENT) M.SATOH
28-C CHANGED SHEET NUMBER
28-D ADDED SHEET FOR PILOT BEARING ASSEMBLY
46 ADDED DIAMOND WASHER ASSEMBLY
46-A ADDED SHEET FOR PILOT BEARING ASSEMBLY
010608 AN 55 CHANGED TIGHTENING TORQUE EN00E11208966001 M.SATOH
010622 AP 35 ADD SEALANT FOR CORE PLUG AS OPTION EN00E11189361000 M.YAMAYA
010626 AR 44-C CHANGED PART NUMBER AND NAME EN00E11229554000 N.KOSHIMOTO
010626 AR 44-D CHANGED PART NUMBER AND NAME EN00E11229554000 N.KOSHIMOTO
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AR EN00E11229554000 01-06-26 2001 2.0L-4V NON DI CD132 1M 1N
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
010626 AR 44-E CHANGED PART NUMBER AND NAME EN00E11229554000 N.KOSHIMOTO
010626 AR 44-F CHANGED PART NUMBER AND NAME EN00E11229554000 N.KOSHIMOTO
010626 AR 48-E CHANGED TIGHTENING TORQUE (CORRECTED ERROR) EN00E11229554000 N.KOSHIMOTO
010702 AS 13 CHANGED SPECIFICATION FOR AVDEL PLUG TO BLOCK DEPTH EN00E11200123000 A.MATSUE
010713 AT 70-C CHANGED SKETCH AND TIGHTENING TORQUE EN00E11231785007 T.GOTO
71-C ADDED HIGH PRESSURE FUEL PIPE FIXING
78-C CHANGED SKETCH AND TIGHTENING TORQUE OF FUEL RAIL AND PLATE
79-C CHANGED SKETCH
82-C CHANGED SKETCH AND HIGH PRESSURE PIPE FIXING
010713 AT 83-C CHANGED SKETCH AND NOTE AND PROCEDURE EN00E11231785007 T.GOTO
010807 AU 6 CHANGED NOTE ("REF ONLY" TO "INFORMATION") EN00E11212646000 Y.YAMAMOTO
14 DELETED NOTE "BREAKAWAY TORQUE" Y.HAYAMIZU
14-D DELETED NOTE "BREAKAWAY TORQUE" Y.HAYAMIZU
17 CHANGED NOTE ("REF ONLY" TO "INFORMATION") Y.YAMAMOTO
20 CHANGED NOTE ("REFFERENCE" TO "INFORMATION") Y.YAMAMOTO
40 ADDED NOTE M.YAMAYA
44 CHANGED NOTE FOR HIPOID OIL SPEC
44-C CHANGED NOTE FOR HIPOID OIL SPEC
44-D CHANGED NOTE FOR HIPOID OIL SPEC
44-E CHANGED NOTE FOR HIPOID OIL SPEC
44-F CHANGED NOTE FOR HIPOID OIL SPEC M.YAMAYA
65-C CHANGED SHEET NUMBER N.TABATA
65-D ADDED SHEET FOR KNOCK SENCOR ASSEMBLY PROCEDURE
92-D CHANGED SHEET NUMBER
92-E ADDED SHEET FOR KNOCK SENCOR ASSEMBLY PROCEDURE
98-B CHANGED PART NUMBER N.TABATA
010807 AU 100-H CHANGED TIGHTENING TORQUE (CORRECTED ERROR) EN00E11212646000 C.MORISHIGE
010811 AV 78-E DELETED SHEET EN00E11252991000 T.GOTO
78-F ADDED SHEET FOR FUEL RAIL ASSEMBLY PROCEDURE
95-F DELETED SHEET
95-G ADDED SHEET FOR VACUUM HOSE ASSEMBLY PROCEDURE
010811 AV 95-H ADDED SHEET FOR VACUUM HOSE ASSEMBLY PROCEDURE EN00E11252991000 T.GOTO
010911 AW 3 CHANGED NOTE EN00E11114191001 C.MORISHIGE
3A ADDED INDEX SHEET C.MORISHIGE
47 CHANGED PART NUMBER AND NAME N.KOSHIMOTO
47-E CHANGED PART NUMBER AND NAME
47-F CHANGED PART NUMBER AND NAME
48 CHANGED PART NUMBER AND NAME
48-E CHANGED PART NUMBER AND NAME
010911 AW 48-F CHANGED PART NUMBER AND NAME EN00E11114191001 N.KOSHIMOTO
010927 AX 46 CHANGED PART NUMBER AND NAME EN00E11183682001 N.KOSHIMOTO
46-A CHANGED PART NUMBER AND NAME
48 CHANGED PART NUMBER AND NAME
48-E CHANGED PART NUMBER AND NAME
010927 AX 48-F CHANGED PART NUMBER AND NAME EN00E11183682001 N.KOSHIMOTO
010929 AY 14 CHANGED NOTE EN00E11255546001 Y.HAYAMIZU
010929 AY 14-A ADDED INDEX SHEET FOR BYPASS PIPE PRESS-IN ANGLE. EN00E11255546001 Y.HAYAMIZU
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AZ EN00 E11184847 002 01-10-12 2001 2.0L-4V NON DI CD132 1N 1P
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
011012 AZ 61-B CORRECTED SPECIFICATION EN00E11184847002 K.ISHIDA
61-C DELETED SHEET
61-E ADDED SHEET FOR PLASTIC CAM COVER
011012 AZ 104-B ADDED SHEET FOR PLASTIC CAM COVER EN00E11184847002 K.ISHIDA
011017 BA 6 ADDED NOTE EN00E11255548001 Y.YAMAMOTO
7 ADDED NOTE & CHANGED FROM CONDUCT TO INFORMATON
8 CHANGED FROM REFERENCE TO CONDUCT
011017 BA 10 ADDED NOTE EN00E11255548001 Y.YAMAMOTO
011026 BB 103-C ADDED NOTE EN00E11273745001 Y.HAYAMIZU
103-D ADDED SHEET FOR C214
011026 BB 103-E ADDED SHEET FOR J56J AND J48C EN00E11273745001 Y.HAYAMIZU
011030 BC 39 ADDED TOLERABLE LEAKAGE FOR THE ENGINE OF CD132 AND RANGER EN00E11185527000 M. YAMAYA
011102 BD 12 CORRECTED PART NUMBER EN00E11271059000 Y.INOUE
12-A CORRECTED PART NUMBER
27 CHANGED NOTE
32 CORRECTED PART NUMBER
75 CORRECTED PART NUMBER Y.INOUE
78-B CHANGED NOTE I.SHIMIZU
91-B CHANGED NOTE I.SHIMIZU
011102 BD 95-F ADDED SHEET FOR 04MY P150 EN00E11271059000 F.TANAKA
011105 BE 23-A CHANGE THE "SNUG" TORQUE ALLOWANCE OF THE CRANK SHAFT BOLT. EN00E11218821000 Y.INOUE
011108 BF 66-A ADDED NOTICE OF RECYCLE LIFTING EYE ONLY FOR THE FORD VEHICLE EN00E11157003000 M. YAMAYA
011109 BG 33 CORRECTED DIMENSION EN00E11282537000 K.ISHIDA
34 CHANGED SHEET NUMBER
34-A ADDED SHEET
49-A CORRECTED NOTE
49-B CORRECTED NOTE
49-E CORRECTED NOTE
50 CORRECTED PART NUMBER
50-A DELETED SHEET
61-B CORRECTED PART NUMBER
97-A CHANGED SHEET NUMBER
011109 BG 97-B ADDED SHEET FOR C1 AND 2.3L EW PFI EN00E11282537000 K.ISHIDA
011112 BH 110 CHANGED SHEET NUMBER EN00E11266219000 Y.HAYAMIZU
011112 BH 110-A ADDED SHEET FOR J16 2.3L EN00E11266219000 Y.INOUE
011113 BJ 3 CHANGED NOTE EN00E11284707000 Y.HAYAMIZU
3-A CHANGED NOTE Y.HAYAMIZU
30-E ADDED SHEET FOR J56A J56F J16 2.3L K.ISHIDA
011113 BJ 31 CHANGED SHEET NUMBER EN00E11284707000 Y.INOUE
011114 BK 71-C CHANGED NOTE EN00E11281359001 Y.HAYAMIZU
011115 BL 3 CHANGED NOTE EN00E11271652000 N.TABATA
3A CHANGED NOTE N.TABATA
62-A CHANGED NOTE N.TABATA
64 CHANGED NOTE F.TANAKA
73-A DELETE THE ASSEMBLING PROCEDURE OF ECT N.TABATA
73-C CHANGED SHEET NUMBER N.TABATA
011115 BL 73-D ADDED SHEET FOR SOLENOID VALVE ASSEMBLY PROCEDURE EN00E11271652000 N.TABATA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC BL EN00E11271652000 01-11-15 2001 2.0L-4V NON DI CD132 1P 1R
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
ISSUE
DATE
ISS
REF
SHT
No.
REVISION WERS RELEASE NO DRAWN
011115 BL 74-C CHANGED SHEET NUMBER EN00E11271652000 N.TABATA
74-D ADDED SHEET FOR ETC ASSEMBLY PROCEDURE N.TABATA
85-D ADDED SHEET FOR INTKE MANFOLD ASSEMBLY PROCEDURE F.TANAKA
89-D
ADDED SHEET FOR IABV BLANKING AND SOLENOID VALVE ASSEMBLY
PROCEDURE
F.TANAKA
89-G CHANGED SHEET NUMBER N.TABATA
89-H ADDED SHEET FOR IABV ASSEMBLY PROCEDURE
91-A CHANGED NOTE
102-C ADDED SHEET FOR INJECTOR HARNESS ASSEMBLY PROCEDURE
011115 BL 102-D ADDED SHEET FOR INJECTOR HARNESS ASSEMBLY PROCEDURE EN00E11271652000 N.TABATA
011207 BM 61-F ADDED SHEET FOR CAM CAVER ASSEMBLY PROCEDURE EN00E11247483004 K.ISHIDA
011224 BN 44-F DELETED 2.0L DI SHEET EN00E11293320000 Y.HAYAMIZU
011224 BN 89-G DELETED 2.0L DI SHEET EN00E11293320000 Y.HAYAMIZU
020110 BP 92-E CHANGED SHEET NUMBER EN00E11290169002 N.TABATA
020110 BP 92-F ADDED SHEET FOR 1.8L-DISI KNOCK SENSOR ASSEMBLY PROCEDURE EN00E11290169002 N.TABATA
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC BP EN00E11290169002 02-01-10 2001 2.0L-4V NON DI CD132 1R 2
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS REVISION
Sheet adaptation Matrix X : to be adapted
Sheet
No.
1.
8L
/
2.
0L
no nD
I E
/W
2.
3L
no nD
I E
/W
1.
8L
/2
.0
L
D
I E
/W
2.
3L
N
/S Sheet
No.
1.
8L
/
2.
0L
no nD
I E
/W
2.
3L
no nD
I E
/W
1.
8L
/2
.0
L
D
I E
/W
2.
3L
N
/S Sheet
No.
1.
8L
/
2.
0L
no nD
I E
/W
2.
3L
no nD
I E
/W
1.
8L
/2
.0
L
D
I E
/W
2.
3L
N
/S
4 X X X X 46-A X X X 81-C
4-A X X X X 46-E X 82-C X
5 X X X X 47 X X X X 83-C X
6 X X X X 47-E X 84-C X
7 X X X X 48 X X X X 84-D X
8 X X X X 48-E X 85-A X X
9 X X X X 49-A X X 85-B X
10 X X X X 49-B X X 85-C X
11 X X X X 49-E X 85-D
11-D 50 X X X 86-D
12 X X X 50-A X X 87-B X
12-A X 51 X X X X 87-C X
13 X X X X 52-A X X X 87-D
14 X X X 52-B X 87-E X
14-D X 52-E X X X 87-F X
15-A X X X X 53-A 88-A X X
15-D 53-B 88-B X
16 X X X X 54 X X X 88-C X
17 X X X X 55 X X X X 88-D
18 X X X X 56-C X 89-A X X
19 X X X X 57 X X X X 89-B X
20 X X X X 58 X X X 89-D
21-A X X 58-C X 89-E X
21-B X X 58-D 89-F X
22 X X X X 59 X X X X 89-G X
23-A X X X X 60 X X X X 90-A X X
23-B X X X X 60-A X X X 90-B X
23-C X X X X 60-C X 90-C X
23-D 61-A X X 90-D X
24 X X X X 61-B X 91-A X X
25-A X X X 61-C X 91-B X
25-B X 61-D X 91-C X
25-E X 61-E X 92-A X X
25-F X 61-F X 92-B X
25-G X 61-G X 92-C X
25-H X 61-J X X 93-A X X X
26 X X X X 62-A X X X 93-B X
27 X X X X 62-B 94 X X X
28 X X X X 62-C . 95-A X X
28-A X X X X 63-B X 95-B X
28-B X X X 63-D 95-D X
28-C X 64 X X X X 96-B X
28-D X X X 65-A X X 96-D
29 X X X X 65-B X 97-A X X X
29-D 65-C X 98-A X X
30-A X X X 66-A X X X 98-B X
30-B X 66-B X 99 X X
30-D X X 66-D 99-B X
30-E X X X X 67-A X X 100-C X
31 67-B X X X 100-D X
31-D 67-D X 100-E X
32 X X X X 68 X X X X 100-F X
32-D 69-C X 100-G X
33 X X X X 70-C X 100-H X
34 X X X X 71-A X X 100-J X
35 X X X X 71-B X 100-K X
36 X X X X 71-C X 100-L X
37 X X X X 72-C X 100-M X
38 X X X X 73-A X X 100-N X
39 X X X X 73-B X 101-C
40 X X X X 73-C X 102-C
41 X X X X 74-C X 103-C X
42 X X X X 75 X X X X 104-A X X X X
42-D 76-A X X 104-B
43 X X X X 76-B X 105 X X X X
44 X X X 76-C X 106-A
44-C X 76-D X 107-A X X X
44-D X 77 X X 107-B X
44-E X X 78-A X X 108 X
44-F X 78-B X 109 X
45 X X X X 78-C X 110 X X X X
45-D 79-C X 111 X X X X
46 X X X X 80-C X
CONFIDENTIAL
01-06-08 2001 2.0L-4V NON DI CD132 2 3
GENERAL INFORMATION
C1S7G-543-AC AN EN00E11208966001
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
PART NAME/TITLE SHEET NUMBER
A ABSOLUTE PRESS SENSOR 90A-C
AIR BYPASS VALVE 89B / 89H
AIR BYPASS VALVE & SOLENOID VALVE 89A / 89E
AUDIO GROUND STRAP 87F
B BACKLASH MEASURING METHOD 25F
BALANCER AND SELECTED SHIM TO BLOCK 25H
BALANCER AND SHIM TO BLOCK 25E
BARCODE 5 / 111
C CAM SHAFT & CAM CAP 44 / 44C-F
CAM COVER & GASKET ASSEMBLY 60C / 61A-E / 61J
CAP-BLIND PLUG 90D
CHAIN-AUX OIL PUMP/SPROCKET-AUX OIL PUMP DRV 46 / 46A
CHAIN-TIMING/GUIDE-TIMING CHAIN 48 / 48E-F
CHT SENSOR 63-B
CONROD BEARING COLOUR CODING 21A-B
CONROD BEARING LINERS 19
CONROD BEARING,CAPS & BOLTS 22
CONROD WEIGHT TOLERANCE 8
COOLER ASY-OIL & FASTENER 94
COVER ASY-CYL FRONT 52A-B
CRANKCASE VENTILATION 88A-C
CRANKCASE VENTILATION COVER 64
CYLINDER HEAD & BOLTS 41
D DIPSTICK & DIPSTICK TUBE 97A / 97B
DIS COIL 73A
DIS COIL & SENSOR-WATER TEMP 73B
DOWEL ASY-CYLINDER BLOCK 27 / 32
E EGR BLANKING PLATE 67B / 87E
EGR OUTLET 87C
EGR TUBE 77 / 87B
EGR VALVE 67A / 67D / 72C
ENGINE NUMBER STAMPING POSITION 31
ENGINE WIRE HARNESS 80C / 81C / 99 / 100C / 101C / 102C-D
EXCESS RTV REMOVING 51
EXHAUST MANIFOLD 96B
F FLYWHEEL ASY 28
FILTER ASY-OIL/ADAPTER/OIL PRESSURE SWITCH 93A-B
FUEL PUMP ASSEMBLY 70C
FUEL PUMP COVER ASSEMBLY 69C
FUEL RAIL ASSEMBLY 78A-D / 78F
FUEL RAIL COVER 84D
FUEL RETURN HOSE 79C
G GENERAL INFOMAITION 4 / 4A
GASKET-CYLINDER HEAD 34
H HIGH PRESSURE FUEL PIPE 82C
HIGH PRESSURE FUEL PIPE/MARKET SERVISE 83C
HOSE ASSY E/G/R COOL OUTLET 103C-E
HOSE&CLAMP ASSY-WATER BYPASS 76A-D
HOSE-EVAP 108
HOSES-VACUUM 95A-B / 95D-H
I IABV BLANKING PLATE AND SOLENOID VALVE 89-D
IDLER ASY-ACC DR BELT 52E
IGNITION COIL 73C / 73E
INSTALLATION DUAL MASS FLYWHEEL 28B / 110
INSTALLATION FLEXPLATE(AUTO) 28A
INTAKE & EXHAUST VALVES 38
INTAKE MANIFOLD 85A-D
L LIFTING EYE FRONT & REAR 66A-B
CONFIDENTIAL
2001 2.0L-4V NON DI CD132 3 3A
REV DATE MODEL
PART NAME/TITLE
INDEX
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
C1S7G-543-AC
RESTRICTIONS
BL 01-11-15EN00E11271652 000
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
PART NAME/TITLE SHEET NUMBER
M MAIN BEARING & THRUST LINERS 15A
MAIN BEARING CLEARANCES 17
MAIN BEARING COLOUR CODING 18
MAIN BEARING LADDER BEAM & BOLTS 23A
MAIN BEARING UPPER 23B
MAIN BEARING LOWER 23C
O OIL FILLER CAP 104A-B
OIL PAN & OIL FILL QUANTITIES 30A-D / 30E
P PILOT BEARING 28C / 28D
PIPE CONNECTOR-BYPASS 14 / 14A / 14D
PISTON & CONROD ASSEMBLY 10
PISTON AND CONROD ASY 9
PISTON GRADE CHART 6
PISTON RING 7
PLUG-AVDEL 36
PLUG-CYLINDER HEAD 35
PLATE END 110A
PLUG-OIL GALLERY 12 / 12A / 13 / 105
PLUG-TIMING PIN HOLE 75
PROCEDURE-CAMCAP BOLT 45
PROCEDURE-CONROD BEARING LINER 20
PROCEDURE-CYLINDER HEAD BOLTS 42
PROCEDURE-MAIN BEARING LINER 16
PULLEY / DAMPER-CRANKSHAFT 55
PUMP ASY-OIL & GASKET-OIL PUMP TO BLOCK 24
R REPLACEMENT OF SHIM SELECTION 25G
REAR OIL SEAL-CRANKSHAFT 26
RTV SEALER-CAM COVER 60 / 60A
RTV SEALER-CYL HEAD GASKET 33 / 34A
RTV SEALER-FRONT COVER 49A / 49B / 49E
RTV SEALER-OIL PAN 29
S SCREEN AND COVER ASY-OIL PUMP 25A / 25B
SENSOR ECT 74C-D
SENSOR-CAM ANGLE 58C
SENSOR-CAMSHAFT POSITION 58 / 58E
SENSOR-CRANKSHAFT POSITION 54 / 56C
SENSOR-KNOCK 65A-C / 92A-E
SOL-ENG VAR TM 44-G / 44-H
SOLENOID VALVE 73D / 89F / 89G
SPARK PLUG 62-A
SPARK PLUG LEADS 98A / 98B
SPROCKET-CAMSHAFT 47 / 47E / 47F
SPROCKET-CRANKSHAFT & TIMING PLATE 57
STUD-ENGINE MOUNT 50
STUDS-EXHAUST MANIFOLD 40
SUPT-INTK MANF 84C
T THERMOSTAT 68
THROTTLE BODY 91A-C
V VACUUM HARNESS 109
VALVE ASY-ENG PISTON OIL COOL 11
VALVE LIFTERS 43
VALVE SPRINGS & RETAINERS 39
VALVE STEM OIL SEALS 37
W WATER PUMP & GASKET 59
WATER OUTLET CONNECTOR & GASKET 71A-C
WATER PUMP PULLEY 107A
WATER PUMP PULLEY & FAN PULLEY 107B
WIRING ASY 99B / 100D-H / 100J-N
BL 01-11-15 2001 2.0L-4V NON DI CD132
REV DATE MODEL
PART NAME/TITLE
INDEX
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
C1S7G-543-AC
RESTRICTIONS
EN00E11271652 000
CONFIDENTIAL
3A 4
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
HOT TEST SPECIFICATION ALL ENGINES TO BE HOT TESTED TO SPECIFICATION S88WF-6L084-AA
OIL LEAK TEST THERE SHALL BE NO VISIBLE OIL LEAKS UNDER STATIC AND OPERATING
CONDITIONS.
TORQUE DEFINITION ASSEMBLY TORQUE - THE TORQUE IMPARTED BY A TOOL DURING ASSEMBLY
AND MEASURED AT TOOL STALL POINT.
STABILIZED TORQUE - WILL BE CHECKED AFTER HOT TEST AT THE FIRST
ROTARY MOVEMENT OF THE FASTENER IN THE DIRECTION TO INCREASE ITS
CLAMPING LOAD.
TORQUE CHECK THE SPECIFIED STABILIZED TORQUE MUST BE ACHIEVED AT THE BUY-OFF
STAGE AND MAINTAINED WITHIN THE RANGE SPECIFIED ON ENGINE TEARDOWN
QUALITY CONTROL A PERCENTAGE OF ENGINE MUST BE CHECKED AFTER HOT TEST FOR
LEAKAGE AND ASSEMBLY TORQUE.
TORQUE TO TURN AT-6011-(CYLINDER ASSEMBLY) STAGE OF ASSEMBLY, TORQUE MUST NOT
CRANKSHAFT EXCEED TBE…Nm. REF ONLY.
AT-6011-(CYLINDER ASSEMBLY) STAGE OF ASSEMBLY, BUT WITH CYLINDER
HEAD FITTED LESS SPARK PLUGS AND CYLINDER HEAD BOLTS TIGHTENED TO
SPECIFICATION, TORQUE TO ROTATE CRANKSHAFT MUST NOT EXCEED
TBE…Nm. REF ONLY
CRANKSHAFT TO BE ROTATED AT LEAST ONE COMPLETE REVOLUTION TO
OBTAIN MAXIMUM READING.
RE-USE OF FASTENERS FASTENERS WHICH CAN BE RE-USED MUST BE BROUGHT BACK TO ORIGINAL
FINISH SPECIFICATION BEFORE RE-ASSEMBLY OR REPLACED BY UNUSED
FASTENERS. i.e. LUBRICATED FINISHES MUST BE RE-LUBRICATED AND DRY
FINISHES DEGREASED.
FASTENERS WHICH HAVE STABILIZED AT A HIGHER TORQUE THAN THE
MAXIMUM SPECIFIED MUST BE REPLACED,
ASSOCIATED COMPONENTS MUST BE CHECKED FOR POSSIBLE DAMAGE AND
IF NECESSARY BE REPAIRED OR REPLACED BEFORE RE-ASSEMBLY.
BOLTS WHICH WERE PREPARED AND USED FOR THE CHECK OF ELONGATION,
(CENTERING MARKS ON TOP AND BOTTOM SIDE) CAN BE REUSED,
IF RE-USAGE OF THE BOLT IS GENERALLY PERMITTED.
FOREIGN MATTER FOR THE ACCEPTABLE MAXIMUM AMOUNT OF FOREIGN MATTER REFER
SPECIFICATION TO ENGINEERING SPECIFICATION S72HM-6B616-AA.
FACTORY FILL OIL SPEC WSS-M2C914-A
HYPOID OIL SPEC SQ-M2C9003-AA
(REF) Dimension MANUFACTURING DEPT. SHALL DETERMINE INSPECTION PERIOD
AFTER CHECKING PROCESS CAPABILITY.
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.0L-4V NON DI CD132 4 4-A
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI GENERAL INFORMATION
CONFIDENTIAL
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
ELECTRICAL CONNECTION ALL ELECTRICAL CONNECTIONS MUST BE POSITIVELY SECURED,
[TO ENSURE GOOD CONTACT] BEFORE ENGINE SHIPMENT.
Characteristic Critical Characteristics (CC) rank is defined in Ford FAO Product
Engineering Procedure FAP03-111.
A : A rank is defined in the azda EngineeringStandards in MES-K01-002
AR : AR rank is defined in the Mazda Engineering Standards in MES-K01-002
To meet to one of them in the case of A parallel marking.
Assistant material If another material, which is not shown in each sheet, is used,
negotiation with Mazda design engineering and approval from them is required.
C1S7G-543-AC X EN00E11099311000 00-10-13 2001 2.0L-4V NON DI CD132 4-A 5
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTIONS GENERAL INFORMATION
CONFIDENTIAL
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 11-D 12
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 15-D 16
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 23-D 24
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC N EN00 E 11030674 000 00-02-10 2001 2.0L-4V NON DI 28-A 28-B
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC X EN00E11099311 000 00-10-13 2001 2.0L-4V NON DI CD132 28-B 28-C
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 29-D 30-A
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.0L-4V NON DI 31 31-D
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2003 2.8L-4V NON DI RANGER 31-D 32
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 32-D 33
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 42-D 43
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
RESTRICTIONS
SPECIFICATION NO.
C1S7G-543-AC
REV
BN
RELEASE NO.
EN00E11293320000
MODEL
2004 2.0L-4V DI D-VVT
SHEET CONTD.
44-F 44-G
PART NAME/TITLE
DATE
01-12-24
This page is intentionally Blank
CONFIDENTIAL
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 45-D 46
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AH EN00E11190272000 01-03-28 2003 2.3L-4V VVT / BS 46-E 47
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
RESTRICTIONS
SPECIFICATION NO.
C1S7G-543-AC
REV
BG
RELEASE NO.
EN00E11282537000
MODEL
2003 2.3L-4V Dual-VVT U204
SHEET CONTD.
50-A 51
DATE
01-11-09
PART NAME/TITLE
This page is intentionally Blank
CONFIDENTIAL
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.3L-4V NON DI RANGER 53-A 53-B
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.3L-4V NON DI RANGER 53-B 54
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AH EN00E11190272000 01-03-28 2003 2.8L-4V NON DI RANGER 58-D 58-E
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
RESTRICTIONS
SPECIFICATION NO.
C1S7G-543-AC
REV
AZ
RELEASE NO.
EN00E11184847002
MODEL
2002 1.8L-4V DI CD132
SHEET CONTD.
61-C 61-D
DATE
01-10-12
PART NAME/TITLE
This page is intentionally Blank
CONFIDENTIAL
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AH EN00E11190272000 01-03-28 2003 2.3L-4V NON DI J56 61-G 61-J
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.3L-4V NON DI RANGER 62-B 62-C
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC T EN00E11095813000 00-06-30 2001 2.3L-4V NON DI RANGER 62-C 63-B
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 63-D 64
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 66-D 67-A
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC AV EN00E11252991000 01-08-11 2003 2.3L-4V NON DI P273 78-E 78-F
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 86-D 87-B
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 87-D 87-E
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 88-D 89-A
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
RESTRICTIONS
SPECIFICATION NO.
C1S7G-543-AC
REV
BN
RELEASE NO.
EN00E11293320000
MODEL
2004 2.0L DI CD132
SHEET CONTD.
89-G 89-H
PART NAME/TITLE
DATE
01-12-24
This page is intentionally Blank
CONFIDENTIAL
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC W EN00E11140144000 00-10-01 2003 2.8L-4V NON DI RANGER 96-D 97-A
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
EN00E11212646000AU 01-08-07
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.3L-4V NON DI RANGER 104-B 105
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC H EN00E11007392000 99-09-06 2001 2.0L-4V NON DI CD132 106-A 107-A
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI
This page is intentionally Blank
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC N EN00 E 11030674 000 00-02-10 RANGER 109 110
REV DATE MODEL
PART NAME/TITLE
SHEET CONTD.RELEASE NO.SPECIFICATION NO.
RESTRICTI VACUUM HARNESS
ENGINE ASSEMBLY PROCEDURES AND INSTRUCTIONS
CLEARANCE LIMITS AND SPECIFICATIONS
CONFIDENTIAL
C1S7G-543-AC BH EN00 E11266219 000 01-11-12 2001 2.0L-4V NON DI CD132 110 110-A
INSTALLATION DUAL MASS FLYWHEEL

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10