Driven Halo Clutch Lever Part#:DFL-AS-681 ... - Driven Racing

Copy and paste this link to your website, so they can see this document directly without any plugins.



Keywords

Step, lever, part, KAWASAKI, number, that, brake, Driven, grease, sure, bike, clutch, bolt, listed, Lever, from, Make, Please, with, pivot, cable, Halo, apply, DFL-AS-681, push, Z1000, Racing, 11-12, FIG., contact

Transcript

Driven Halo Clutch Lever
Part#:DFL-AS-681
INSTALLATION INSTRUCTIONS
*Lever number DFL-AS-681 must use oem lever bushing from stock lever Kawasaki part number
92152-0103
Step 1
This lever part number DFL-AS-681 fits the following bike and years:
Step 2
Please locate the part number on the lever and compare it to the part number listed above
KAWASAKI ZX-6R/636 07-16
KAWASAKI ZX-10R 06-15
KAWASAKI Z1000 SX 11-15
KAWASAKI Z1000 07-15
KAWASAKI Z750R 11-12
FIG. 1
Driven Halo Clutch Lever
Part#:DFL-AS-681
INSTALLATION INSTRUCTIONS
*Lever number DFL-AS-681 must use oem lever bushing from stock lever Kawasaki part number
92152-0103
Step 1
This lever part number DFL-AS-681 fits the following bike and years:
Step 2
Please locate the part number on the lever and compare it to the part number listed above
KAWASAKI ZX-6R/636 07-16
KAWASAKI ZX-10R 06-15
KAWASAKI Z1000 SX 11-15
KAWASAKI Z1000 07-15
KAWASAKI Z750R 11-12
FIG. 1
Step 3
Make sure the part number(FIG.1) on the lever and the bike you are installing on matches the part
number/bike listed above. In the event that it does not, do not attempt to install the lever.
Please contact Driven Racing directly and we will instruct you on how to proceed.
By phone: 818-775-0041
By email: info@drivenracing.com
Step 4
Remove O.E.M. brake or clutch lever from bike (use your service manual for instructions.)
Step 5
Take the Driven Halo Lever out after confirming that you have the right application and use the
grease tube(supplied) and apply grease on the pivot bolt and inside the push rod(on the clutch
side, put a little grease on the cable end if it’s a cable activated clutch)
Step 6
Align the lever hole with the perch hole, and push the pivot bolt in. Tighten the bolt and secure it
with the locking nut (apply Blue Loctite to both).
Step 7
Make sure brake lever has free play in it and is not “sticky” make sure that the electrical switch is
engaging (both on the brake and clutch side).
Step 8
Turn on the ignition switch, and verify that when you apply the front brake, the rear brake light is
turned on.
Step 3
Make sure the part number(FIG.1) on the lever and the bike you are installing on matches the part
number/bike listed above. In the event that it does not, do not attempt to install the lever.
Please contact Driven Racing directly and we will instruct you on how to proceed.
By phone: 818-775-0041
By email: info@drivenracing.com
Step 4
Remove O.E.M. brake or clutch lever from bike (use your service manual for instructions.)
Step 5
Take the Driven Halo Lever out after confirming that you have the right application and use the
grease tube(supplied) and apply grease on the pivot bolt and inside the push rod(on the clutch
side, put a little grease on the cable end if it’s a cable activated clutch)
Step 6
Align the lever hole with the perch hole, and push the pivot bolt in. Tighten the bolt and secure it
with the locking nut (apply Blue Loctite to both).
Step 7
Make sure brake lever has free play in it and is not “sticky” make sure that the electrical switch is
engaging (both on the brake and clutch side).
Step 8
Turn on the ignition switch, and verify that when you apply the front brake, the rear brake light is
turned on.

PDF Document reader online

This website is focused on providing document in readable format, online without need to install any type of software on your computer. If you are using thin client, or are not allowed to install document reader of particular type, this application may come in hand for you. Simply upload your document, and Docureader.top will transform it into readable format in a few seconds. Why choose Docureader.top?

  1. Unlimited sharing - you can upload document of any size. If we are able to convert it into readable format, you have it here - saved for later or immediate reading
  2. Cross-platform - no compromised when reading your document. We support most of modern browers without the need of installing any of external plugins. If your device can oper a browser - then you can read any document on it
  3. Simple uploading - no need to register. Just enter your email, title of document and select the file, we do the rest. Once the document is ready for you, you will receive automatic email from us.

Previous 10

Next 10